From b32d92e890caac903491116e9d817aa780c0323b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 23 Jul 2014 15:03:00 +0200 Subject: Imported Upstream version 1.8.14 --- src/plugins/serial/serial_terminal.c | 919 +++++++++++++++++++++++++++++++++++ 1 file changed, 919 insertions(+) create mode 100644 src/plugins/serial/serial_terminal.c (limited to 'src/plugins/serial/serial_terminal.c') diff --git a/src/plugins/serial/serial_terminal.c b/src/plugins/serial/serial_terminal.c new file mode 100644 index 0000000..41d3753 --- /dev/null +++ b/src/plugins/serial/serial_terminal.c @@ -0,0 +1,919 @@ +/* + * Copyright (c) 2007-2012 Pigeon Point Systems. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * Neither the name of Pigeon Point Systems nor the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any kind. + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, + * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. + * PIGEON POINT SYSTEMS ("PPS") AND ITS LICENSORS SHALL NOT BE LIABLE + * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING + * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL + * PPS OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, + * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR + * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF + * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, + * EVEN IF PPS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + +/* Serial Interface, Terminal Mode plugin. */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#if defined(HAVE_CONFIG_H) +# include +#endif + +#define IPMI_SERIAL_TIMEOUT 5 +#define IPMI_SERIAL_RETRY 5 +#define IPMI_SERIAL_MAX_RESPONSE 256 + +/* + * Terminal Mode interface is required to support 40 byte transactions. + */ +#define IPMI_SERIAL_MAX_RQ_SIZE 37 /* 40 - 3 */ +#define IPMI_SERIAL_MAX_RS_SIZE 36 /* 40 - 4 */ + +/* + * IPMB message header + */ +struct ipmb_msg_hdr { + unsigned char rsSA; + unsigned char netFn; /* NET FN | RS LUN */ + unsigned char csum1; + unsigned char rqSA; + unsigned char rqSeq; /* RQ SEQ | RQ LUN */ + unsigned char cmd; + unsigned char data[0]; +}; + +/* + * Send Message command request for IPMB-format + */ +struct ipmi_send_message_rq { + unsigned char channel; + struct ipmb_msg_hdr msg; +}; + +/* + * Get Message command response for IPMB-format + */ +struct ipmi_get_message_rp { + unsigned char completion; + unsigned char channel; + unsigned char netFn; + unsigned char csum1; + unsigned char rsSA; + unsigned char rqSeq; + unsigned char cmd; + unsigned char data[0]; +}; + +/* + * Terminal mode message header + */ +struct serial_term_hdr { + unsigned char netFn; + unsigned char seq; + unsigned char cmd; +}; + +/* + * Sending context + */ +struct serial_term_request_ctx { + uint8_t netFn; + uint8_t sa; + uint8_t seq; + uint8_t cmd; +}; + +/* + * Table of supported baud rates + */ +static const struct { + int baudinit; + int baudrate; +} rates[] = { + { B2400, 2400 }, + { B9600, 9600 }, + { B19200, 19200 }, + { B38400, 38400 }, + { B57600, 57600 }, + { B115200, 115200 }, + { B230400, 230400 }, +#ifdef B460800 + { B460800, 460800 }, +#endif +}; + +static int is_system; + +static int +ipmi_serial_term_open(struct ipmi_intf * intf) +{ + struct termios ti; + unsigned int rate = 9600; + char *p; + int i; + + if (!intf->devfile) { + lprintf(LOG_ERR, "Serial device is not specified"); + return -1; + } + + is_system = 0; + + /* check if baud rate is specified */ + if ((p = strchr(intf->devfile, ':'))) { + char * pp; + + /* separate device name from baud rate */ + *p++ = '\0'; + + /* check for second colon */ + if ((pp = strchr(p, ':'))) { + /* this is needed to normally acquire baud rate */ + *pp++ = '\0'; + + /* check if it is a system interface */ + if (pp[0] == 'S' || pp[0] == 's') { + is_system = 1; + } + } + + if (str2uint(p, &rate)) { + lprintf(LOG_ERR, "Invalid baud rate specified\n"); + return -1; + } + } + + intf->fd = open(intf->devfile, O_RDWR | O_NONBLOCK, 0); + if (intf->fd < 0) { + lperror(LOG_ERR, "Could not open device at %s", intf->devfile); + return -1; + } + + for (i = 0; i < sizeof(rates) / sizeof(rates[0]); i++) { + if (rates[i].baudrate == rate) { + break; + } + } + if (i >= sizeof(rates) / sizeof(rates[0])) { + lprintf(LOG_ERR, "Unsupported baud rate %i specified", rate); + return -1; + } + + tcgetattr(intf->fd, &ti); + + cfsetispeed(&ti, rates[i].baudinit); + cfsetospeed(&ti, rates[i].baudinit); + + /* 8N1 */ + ti.c_cflag &= ~PARENB; + ti.c_cflag &= ~CSTOPB; + ti.c_cflag &= ~CSIZE; + ti.c_cflag |= CS8; + + /* enable the receiver and set local mode */ + ti.c_cflag |= (CLOCAL | CREAD); + + /* no flow control */ + ti.c_cflag &= ~CRTSCTS; + ti.c_iflag &= ~(IGNBRK | IGNCR | INLCR | ICRNL | INPCK | ISTRIP + | IXON | IXOFF | IXANY); +#ifdef IUCLC + /* Only disable uppercase-to-lowercase mapping on input for + platforms supporting the flag. */ + ti.c_iflag &= ~(IUCLC); +#endif + + ti.c_oflag &= ~(OPOST); + ti.c_lflag &= ~(ICANON | ISIG | ECHO | ECHONL | NOFLSH); + + /* set the new options for the port with flushing */ + tcsetattr(intf->fd, TCSAFLUSH, &ti); + + if (intf->session->timeout == 0) + intf->session->timeout = IPMI_SERIAL_TIMEOUT; + if (intf->session->retry == 0) + intf->session->retry = IPMI_SERIAL_RETRY; + + intf->opened = 1; + + return 0; +} + +static void +ipmi_serial_term_close(struct ipmi_intf * intf) +{ + if (intf->opened) { + close(intf->fd); + intf->fd = -1; + } + + if (intf->session) { + free(intf->session); + intf->session = NULL; + } + + intf->opened = 0; +} + +/* + * This function waits for incoming byte during timeout (ms). + */ +static int +serial_wait_for_data(struct ipmi_intf * intf) +{ + int n; + struct pollfd pfd; + + pfd.fd = intf->fd; + pfd.events = POLLIN; + pfd.revents = 0; + + n = poll(&pfd, 1, intf->session->timeout*1000); + if (n < 0) { + lperror(LOG_ERR, "Poll for serial data failed"); + return -1; + } else if (!n) { + return -1; + } + return 0; +} + +/* + * Read a line from serial port + * Returns > 0 if there is a line, < 0 on error or timeout + */ +static int +serial_read_line(struct ipmi_intf * intf, char *str, int len) +{ + int rv, i; + + *str = 0; + i = 0; + while (i < len) { + if (serial_wait_for_data(intf)) { + return -1; + } + rv = read(intf->fd, str + i, 1); + if (rv < 0) { + return -1; + } else if (!rv) { + lperror(LOG_ERR, "Serial read failed: %s", strerror(errno)); + return -1; + } + if (str[i] == '\n' || str[i] == '\r') { + if (verbose > 4) { + char c = str[i]; + str[i] = '\0'; + fprintf(stderr, "Received data: %s\n", str); + str[i] = c; + } + return i + 1; + } else { + i++; + } + } + + lprintf(LOG_ERR, "Serial data is too long"); + return -1; +} + +/* + * Send zero-terminated string to serial port + * Returns the string length or negative error code + */ +static int +serial_write_line(struct ipmi_intf * intf, const char *str) +{ + int rv, cnt = 0; + int cb = strlen(str); + + while (cnt < cb) { + rv = write(intf->fd, str + cnt, cb - cnt); + if (rv < 0) { + return -1; + } else if (rv == 0) { + return -1; + } + cnt += rv; + } + + return cnt; +} + +/* + * Flush the buffers + */ +static int +serial_flush(struct ipmi_intf * intf) +{ +#if defined(TCFLSH) + return ioctl(intf->fd, TCFLSH, TCIOFLUSH); +#elif defined(TIOCFLUSH) + return ioctl(intf->fd, TIOCFLUSH); +#else +# error "unsupported platform, missing flush support (TCFLSH/TIOCFLUSH)" +#endif + +} + +/* + * Receive IPMI response from the device + * Len: buffer size + * Returns: -1 or response lenth on success + */ +static int +recv_response(struct ipmi_intf * intf, unsigned char *data, int len) +{ + char hex_rs[IPMI_SERIAL_MAX_RESPONSE * 3]; + int i, j, resp_len = 0; + unsigned long rv; + char *p, *pp; + char ch, str_hex[3]; + + p = hex_rs; + while (1) { + if ((rv = serial_read_line(intf, p, sizeof(hex_rs) - resp_len)) < 0) { + /* error */ + return -1; + } + p += rv; + resp_len += rv; + if (*(p - 2) == ']' && (*(p - 1) == '\n' || *(p - 1) == '\r')) { + *p = 0; + break; + } + } + + p = strrchr(hex_rs, '['); + if (!p) { + lprintf(LOG_ERR, "Serial response is invalid"); + return -1; + } + + p++; + pp = strchr(p, ']'); + if (!pp) { + lprintf(LOG_ERR, "Serial response is invalid"); + return -1; + } + *pp = 0; + + /* was it an error? */ + if (strncmp(p, "ERR ", 4) == 0) { + serial_write_line(intf, "\r\r\r\r"); + sleep(1); + serial_flush(intf); + errno = 0; + rv = strtoul(p + 4, &p, 16); + if ((rv && rv < 0x100 && *p == '\0') + || (rv == 0 && !errno)) { + /* The message didn't get it through. The upper + level will have to re-send */ + return 0; + } else { + lprintf(LOG_ERR, "Serial response is invalid"); + return -1; + } + } + + /* this is needed for correct string to long conversion */ + str_hex[2] = 0; + + /* parse the response */ + i = 0; + j = 0; + while (*p) { + if (i >= len) { + lprintf(LOG_ERR, "Serial response is too long(%d, %d)", i, len); + return -1; + } + ch = *(p++); + if (isxdigit(ch)) { + str_hex[j++] = ch; + } else { + if (j == 1 || !isspace(ch)) { + lprintf(LOG_ERR, "Serial response is invalid"); + return -1; + } + } + if (j == 2) { + unsigned long tmp; + errno = 0; + /* parse the hex number */ + tmp = strtoul(str_hex, NULL, 16); + if ( tmp > 0xFF || ( !tmp && errno ) ) { + lprintf(LOG_ERR, "Serial response is invalid"); + return -1; + } + data[i++] = tmp; + j = 0; + } + } + + return i; +} + +/* + * Allocate sequence number for tracking + */ +static uint8_t +serial_term_alloc_seq(void) +{ + static uint8_t seq = 0; + if (++seq == 64) { + seq = 0; + } + return seq; +} + +/* + * Build IPMB message to be transmitted + */ +static int +serial_term_build_msg(const struct ipmi_intf * intf, + const struct ipmi_rq * req, uint8_t * msg, size_t max_len, + struct serial_term_request_ctx * ctx, int * msg_len) +{ + uint8_t * data = msg, seq; + struct serial_term_hdr * term_hdr = (struct serial_term_hdr *) msg; + struct ipmi_send_message_rq * outer_rq = NULL; + struct ipmi_send_message_rq * inner_rq = NULL; + int bridging_level; + + /* acquire bridging level */ + if (intf->target_addr && intf->target_addr != intf->my_addr) { + if (intf->transit_addr != 0) { + bridging_level = 2; + } else { + bridging_level = 1; + } + } else { + bridging_level = 0; + } + + /* check overall packet length */ + if(req->msg.data_len + 3 + bridging_level * 8 > max_len) { + lprintf(LOG_ERR, "ipmitool: Message data is too long"); + return -1; + } + + /* allocate new sequence number */ + seq = serial_term_alloc_seq() << 2; + + /* check for bridging */ + if (bridging_level) { + /* compose terminal message header */ + term_hdr->netFn = 0x18; + term_hdr->seq = seq; + term_hdr->cmd = 0x34; + + /* set pointer to send message request data */ + outer_rq = (struct ipmi_send_message_rq *) (term_hdr + 1); + + if (bridging_level == 2) { + /* compose the outer send message request */ + outer_rq->channel = intf->transit_channel | 0x40; + outer_rq->msg.rsSA = intf->transit_addr; + outer_rq->msg.netFn = 0x18; + outer_rq->msg.csum1 = -(outer_rq->msg.rsSA + outer_rq->msg.netFn); + outer_rq->msg.rqSA = intf->my_addr; + outer_rq->msg.rqSeq = seq; + outer_rq->msg.cmd = 0x34; + + /* inner request is further */ + inner_rq = (outer_rq + 1); + } else { + /* there is only one header */ + inner_rq = outer_rq; + } + + /* compose the inner send message request */ + inner_rq->channel = intf->target_channel | 0x40; + inner_rq->msg.rsSA = intf->target_addr; + inner_rq->msg.netFn = (req->msg.netfn << 2) | req->msg.lun; + inner_rq->msg.csum1 = -(inner_rq->msg.rsSA + inner_rq->msg.netFn); + inner_rq->msg.rqSA = intf->my_addr; + inner_rq->msg.rqSeq = seq; + inner_rq->msg.cmd = req->msg.cmd; + + /* check if interface is the system one */ + if (is_system) { + /* need response to LUN 2 */ + outer_rq->msg.rqSeq |= 2; + + /* do not track response */ + outer_rq->channel &= ~0x40; + + /* restore BMC SA if bridging not to primary IPMB channel */ + if (outer_rq->channel) { + outer_rq->msg.rqSA = IPMI_BMC_SLAVE_ADDR; + } + } + + /* fill the second context */ + ctx[1].netFn = outer_rq->msg.netFn; + ctx[1].sa = outer_rq->msg.rsSA; + ctx[1].seq = outer_rq->msg.rqSeq; + ctx[1].cmd = outer_rq->msg.cmd; + + /* move write pointer */ + msg = (uint8_t *)(inner_rq + 1); + } else { + /* compose terminal message header */ + term_hdr->netFn = (req->msg.netfn << 2) | req->msg.lun; + term_hdr->seq = seq; + term_hdr->cmd = req->msg.cmd; + + /* move write pointer */ + msg = (uint8_t *)(term_hdr + 1); + } + + /* fill the first context */ + ctx[0].netFn = term_hdr->netFn; + ctx[0].seq = term_hdr->seq; + ctx[0].cmd = term_hdr->cmd; + + /* write request data */ + memcpy(msg, req->msg.data, req->msg.data_len); + + /* move write pointer */ + msg += req->msg.data_len; + + if (bridging_level) { + /* write inner message checksum */ + *msg++ = ipmi_csum(&inner_rq->msg.rqSA, req->msg.data_len + 3); + + /* check for double bridging */ + if (bridging_level == 2) { + /* write outer message checksum */ + *msg++ = ipmi_csum(&outer_rq->msg.rqSA, 4); + } + } + + + /* save message length */ + *msg_len = msg - data; + + /* return bridging level */ + return bridging_level; +} + +/* + * Send message to serial port + */ +static int +serial_term_send_msg(struct ipmi_intf * intf, uint8_t * msg, int msg_len) +{ + int i, size, tmp = 0; + uint8_t * buf, * data; + + if (verbose > 3) { + fprintf(stderr, "Sending request:\n"); + fprintf(stderr, " NetFN/rsLUN = 0x%x\n", msg[0]); + fprintf(stderr, " rqSeq = 0x%x\n", msg[1]); + fprintf(stderr, " cmd = 0x%x\n", msg[2]); + if (msg_len > 7) { + fprintf(stderr, " data_len = %d\n", msg_len - 3); + fprintf(stderr, " data = %s\n", + buf2str(msg + 3, msg_len - 3)); + } + } + + if (verbose > 4) { + fprintf(stderr, "Message data:\n"); + fprintf(stderr, " %s\n", buf2str(msg, msg_len)); + } + + /* calculate required buffer size */ + size = msg_len * 2 + 4; + + /* allocate buffer for output data */ + buf = data = (uint8_t *) alloca(size); + + if (!buf) { + lperror(LOG_ERR, "ipmitool: alloca error"); + return -1; + } + + /* start character */ + *buf++ = '['; + + /* body */ + for (i = 0; i < msg_len; i++) { + buf += sprintf( buf, "%02x", msg[i]); + } + + /* stop character */ + *buf++ = ']'; + + /* carriage return */ + *buf++ = '\r'; + + /* line feed */ + *buf++ = '\n'; + + /* write data to serial port */ + tmp = write(intf->fd, data, size); + if (tmp <= 0) { + lperror(LOG_ERR, "ipmitool: write error"); + return -1; + } + + return 0; +} + +/* + * Wait for request response + */ +static int +serial_term_wait_response(struct ipmi_intf * intf, + struct serial_term_request_ctx * req_ctx, + uint8_t * msg, size_t max_len) +{ + struct serial_term_hdr * hdr = (struct serial_term_hdr *) msg; + int msg_len; + + /* wait for response(s) */ + do { + /* receive message */ + msg_len = recv_response(intf, msg, max_len); + + /* check if valid message received */ + if (msg_len > 0) { + /* validate message size */ + if (msg_len < 4) { + /* either bad response or non-related message */ + continue; + } + + /* check for the waited response */ + if (hdr->netFn == (req_ctx->netFn|4) + && (hdr->seq & ~3) == req_ctx->seq + && hdr->cmd == req_ctx->cmd) { + /* check if something new has been parsed */ + if (verbose > 3) { + fprintf(stderr, "Got response:\n"); + fprintf(stderr, " NetFN/rsLUN = 0x%x\n", msg[0]); + fprintf(stderr, " rqSeq/Bridge = 0x%x\n", msg[1]); + fprintf(stderr, " cmd = 0x%x\n", msg[2]); + fprintf(stderr, " completion code = 0x%x\n", msg[3]); + if (msg_len > 8) { + fprintf(stderr, " data_len = %d\n", + msg_len - 4); + fprintf(stderr, " data = %s\n", + buf2str(msg + 4, msg_len - 4)); + } + } + + /* move to start from completion code */ + memmove(msg, hdr + 1, msg_len - sizeof (*hdr)); + + /* the waited one */ + return msg_len - sizeof (*hdr); + } + } + } while (msg_len > 0); + + return 0; +} + +/* + * Get message from receive message queue + */ +static int +serial_term_get_message(struct ipmi_intf * intf, + struct serial_term_request_ctx * req_ctx, + uint8_t * msg, size_t max_len) +{ + uint8_t data[IPMI_SERIAL_MAX_RESPONSE]; + struct serial_term_request_ctx tmp_ctx; + struct ipmi_get_message_rp * rp = (struct ipmi_get_message_rp *) data; + struct serial_term_hdr hdr; + clock_t start, tm; + int rv, netFn, rqSeq; + + start = clock(); + + do { + /* fill-in request context */ + tmp_ctx.netFn = 0x18; + tmp_ctx.seq = serial_term_alloc_seq() << 2; + tmp_ctx.cmd = 0x33; + + /* fill-in request data */ + hdr.netFn = tmp_ctx.netFn; + hdr.seq = tmp_ctx.seq; + hdr.cmd = tmp_ctx.cmd; + + /* send request */ + serial_flush(intf); + serial_term_send_msg(intf, (uint8_t *) &hdr, 3); + + /* wait for response */ + rv = serial_term_wait_response(intf, &tmp_ctx, data, sizeof (data)); + + /* check for IO error or timeout */ + if (rv <= 0) { + return rv; + } + + netFn = (req_ctx->netFn & ~3)|(req_ctx->seq & 3)|4; + rqSeq = req_ctx->seq & ~3; + + /* check completion code */ + if (rp->completion == 0) { + /* check for the waited response */ + if (rp->netFn == netFn + && rp->rsSA == req_ctx->sa + && rp->rqSeq == rqSeq + && rp->cmd == req_ctx->cmd) { + /* copy the rest of message */ + memcpy(msg, rp + 1, rv - sizeof (*rp) - 1); + return rv - sizeof (*rp) - 1; + } + } else if (rp->completion != 0x80) { + return 0; + } + + tm = clock() - start; + + tm /= CLOCKS_PER_SEC; + } while (tm < intf->session->timeout); + + return 0; +} + +static struct ipmi_rs * +ipmi_serial_term_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) +{ + static struct ipmi_rs rsp; + uint8_t msg[IPMI_SERIAL_MAX_RESPONSE], * resp = msg; + struct serial_term_request_ctx req_ctx[2]; + int retry, rv, msg_len, bridging_level; + + if (!intf->opened && intf->open && intf->open(intf) < 0) { + return NULL; + } + + /* Send the message and receive the answer */ + for (retry = 0; retry < intf->session->retry; retry++) { + /* build output message */ + bridging_level = serial_term_build_msg(intf, req, msg, + sizeof (msg), req_ctx, &msg_len); + if (msg_len < 0) { + return NULL; + } + + /* send request */ + serial_flush(intf); + serial_term_send_msg(intf, msg, msg_len); + + /* wait for response */ + rv = serial_term_wait_response(intf, &req_ctx[0], msg, sizeof (msg)); + + /* check for IO error */ + if (rv < 0) { + return NULL; + } + + /* check for timeout */ + if (rv == 0) { + continue; + } + + /* check for bridging */ + if (bridging_level && msg[0] == 0) { + /* in the case of payload interface we check receive message queue */ + if (is_system) { + /* check message flags */ + rv = serial_term_get_message(intf, &req_ctx[1], + msg, sizeof (msg)); + + /* check for IO error */ + if (rv < 0) { + return NULL; + } + + /* check for timeout */ + if (rv == 0) { + continue; + } + /* check if response for inner request is not encapsulated */ + } else if (rv == 1) { + /* wait for response for inner request */ + rv = serial_term_wait_response(intf, &req_ctx[1], + msg, sizeof (msg)); + + /* check for IO error */ + if (rv < 0) { + return NULL; + } + + /* check for timeout */ + if (rv == 0) { + continue; + } + } else { + /* skip outer level header */ + resp = msg + sizeof (struct ipmb_msg_hdr) + 1; + /* decrement response size */ + rv -= + sizeof (struct ipmb_msg_hdr) + 2; + } + + /* check response size */ + if (resp[0] == 0 && bridging_level == 2 && rv < 8) { + lprintf(LOG_ERR, "ipmitool: Message response is too short"); + /* invalid message length */ + return NULL; + } + } + + /* check for double bridging */ + if (bridging_level == 2 && resp[0] == 0) { + /* get completion code */ + rsp.ccode = resp[7]; + rsp.data_len = rv - 9; + memcpy(rsp.data, resp + 8, rsp.data_len); + } else { + rsp.ccode = resp[0]; + rsp.data_len = rv - 1; + memcpy(rsp.data, resp + 1, rsp.data_len); + } + + /* return response */ + return &rsp; + } + + /* no valid response */ + return NULL; +} + +static int +ipmi_serial_term_setup(struct ipmi_intf * intf) +{ + intf->session = malloc(sizeof(struct ipmi_session)); + if (intf->session == NULL) { + lprintf(LOG_ERR, "ipmitool: malloc failure"); + return -1; + } + + memset(intf->session, 0, sizeof(struct ipmi_session)); + + /* setup default LAN maximum request and response sizes */ + intf->max_request_data_size = IPMI_SERIAL_MAX_RQ_SIZE; + intf->max_response_data_size = IPMI_SERIAL_MAX_RS_SIZE; + return 0; +} + +int +ipmi_serial_term_set_my_addr(struct ipmi_intf * intf, uint8_t addr) +{ + intf->my_addr = addr; + return 0; +} + +struct ipmi_intf ipmi_serial_term_intf = { + name: "serial-terminal", + desc: "Serial Interface, Terminal Mode", + setup: ipmi_serial_term_setup, + open: ipmi_serial_term_open, + close: ipmi_serial_term_close, + sendrecv: ipmi_serial_term_send_cmd, + set_my_addr:ipmi_serial_term_set_my_addr +}; -- cgit v1.2.3