Description: typo in man-page
Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
Last-Update: 2014-05-19
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
Index: trunk/doc/ipmitool.1
===================================================================
--- trunk.orig/doc/ipmitool.1	2014-05-19 14:51:15.664997239 +0200
+++ trunk/doc/ipmitool.1	2014-05-19 14:54:07.340072131 +0200
@@ -10,47 +10,47 @@
 Any recognized option is accepted. Conditional options may be ignored or it's usage postponed until shell or exec processes relevant command.
 .br
 
-<general-options>   := [ -h | -V | -v | -I <interface> | -H <address> |
-                         -d <N> | -p <port> | -c | -U <username> |
-                         -L <privlvl> | -l <lun> | -m <local_address> |
-                         -N <sec> | -R <count> | <password-option> |
+<general\-options>   := [ \-h | \-V | \-v | \-I <interface> | \-H <address> |
+                         \-d <N> | \-p <port> | \-c | \-U <username> |
+                         \-L <privlvl> | \-l <lun> | \-m <local_address> |
+                         \-N <sec> | \-R <count> | <password\-option> |
                          <oem-option> | <bridge-options> ]
 
-<conditional-opts>  := [ <lan-options> | <lanplus-options> |
-                         <command-options> ]
+<conditional\-opts>  := [ <lan\-options> | <lanplus\-options> |
+                         <command\-options> ]
 .br
 Bridging:
 .br
-<bridge-options>    := -t <target_address> [ -b <channel> |
-                       [ -T <address> | -B <channel> ] ]
+<bridge\-options>    := \-t <target_address> [ \-b <channel> |
+                       [ \-T <address> | \-B <channel> ] ]
 .br
 
-Options used with -I lan:
+Options used with \-I lan:
 .br
-<lan-options>       := [ -A <authtype> ]
+<lan\-options>       := [ \-A <authtype> ]
 .br
 
-Options used with -I lanplus:
+Options used with \-I lanplus:
 .br
-<lanplus-options>   := [ -C <ciphersuite> | <key-option> ]
+<lanplus\-options>   := [ \-C <ciphersuite> | <key\-option> ]
 .br
 
 Option groups setting same value:
 .br
-<key-option>        := [ -k <key> | -K | -y <hex_key> | -Y ]
+<key\-option>        := [ \-k <key> | \-K | \-y <hex_key> | \-Y ]
 .br
-<password-option>   := [ -f <password_file> | -a | -P <password> | -E ]
+<password\-option>   := [ \-f <password_file> | \-a | \-P <password> | \-E ]
 .br
-<oem-option>        := [ -o <oemtype> | -g | -s ]
+<oem\-option>        := [ \-o <oemtype> | \-g | \-s ]
 .br
 
 Options used with specific command <command-options>:
 .br
-<options-sdr>       := [ -S <sdr_cache_file> ]
+<options\-sdr>       := [ \-S <sdr_cache_file> ]
 .br
-<options-sel>       := [ -O <sel_oem> ]
+<options\-sel>       := [ \-O <sel_oem> ]
 .br
-<options-sol>       := [ -e <sol_escape_char> ]
+<options\-sol>       := [ \-e <sol_escape_char> ]
 
 
 .SH "DESCRIPTION"
@@ -120,7 +120,7 @@
 will default to NULL.
 .TP 
 \fB\-g\fR
-Deprecated. Use: -o intelplus
+Deprecated. Use: \-o intelplus
 .TP 
 \fB\-h\fR
 Get basic usage help from the command line.
@@ -151,7 +151,7 @@
 .TP 
 \fB\-m\fR <\fIlocal_address\fP>
 Set the local IPMB address.  The local address defaults to 0x20
-or is auto discovered on PICMG platforms when -m is not specified.
+or is auto discovered on PICMG platforms when \-m is not specified.
 There should be no need to change the local address for normal operation.
 .TP 
 \fB\-N\fR <\fIsec\fP>
@@ -185,7 +185,7 @@
 Command \fIhpm\fP uses fixed value of 10 retries.
 .TP 
 \fB\-s\fR
-Deprecated. Use: -o supermicro
+Deprecated. Use: \-o supermicro
 .TP 
 \fB\-S\fR <\fIsdr_cache_file\fP>
 Use local file for remote SDR cache.  Using a local SDR cache
@@ -223,7 +223,7 @@
 \fB\-y\fR <\fIhex key\fP>
 Use supplied Kg key for IPMIv2.0 authentication. The key is expected in
 hexadecimal format and can be used to specify keys with non-printable
-characters. E.g. '-k PASSWORD' and '-y 50415353574F5244' are
+characters. E.g. '\-k PASSWORD' and '\-y 50415353574F5244' are
 equivalent.
 The default is not to use any Kg key.
 .TP 
@@ -1051,7 +1051,7 @@
 \fIpower\fP <\fBxx=filename1\fR> <\fBxx=filename2\fR> \fB...\fr
 .br
 
-Display power supply informations between carrier and AMC modules.
+Display power supply information between carrier and AMC modules.
 .TP
 \fIall\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
 .br
@@ -1063,7 +1063,7 @@
 .TP
 \fIfrushow\fP <\fBxx=filename\fR>
 .br
-Convert a binary FRU file into human readable text format. Use -v option to get
+Convert a binary FRU file into human readable text format. Use \-v option to get
 more display information.
 
 .RE
@@ -1081,56 +1081,56 @@
   AMC slot B1 port 0 ==> On-Carrier Device 0 port 16
    Matching Result
    - From On-Carrier Device ID 0
-    -Channel ID 11 || Lane 0: enable
-    -Link Type: AMC.2 Ethernet
-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-    -Link Group ID: 0 || Link Asym. Match: exact match
+    \-Channel ID 11 || Lane 0: enable
+    \-Link Type: AMC.2 Ethernet
+    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+    \-Link Group ID: 0 || Link Asym. Match: exact match
    - To AMC slot B1
-    -Channel ID 0 || Lane 0: enable
-    -Link Type: AMC.2 Ethernet
-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-    -Link Group ID: 0 || Link Asym. Match: exact match
+    \-Channel ID 0 || Lane 0: enable
+    \-Link Type: AMC.2 Ethernet
+    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+    \-Link Group ID: 0 || Link Asym. Match: exact match
    *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
   AMC slot B1 port 1 ==> On-Carrier Device 0 port 12
    Matching Result
    - From On-Carrier Device ID 0
-    -Channel ID 6 || Lane 0: enable
-    -Link Type: AMC.2 Ethernet
-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-    -Link Group ID: 0 || Link Asym. Match: exact match
+    \-Channel ID 6 || Lane 0: enable
+    \-Link Type: AMC.2 Ethernet
+    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+    \-Link Group ID: 0 || Link Asym. Match: exact match
    - To AMC slot B1
-    -Channel ID 1 || Lane 0: enable
-    -Link Type: AMC.2 Ethernet
-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-    -Link Group ID: 0 || Link Asym. Match: exact match
+    \-Channel ID 1 || Lane 0: enable
+    \-Link Type: AMC.2 Ethernet
+    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+    \-Link Group ID: 0 || Link Asym. Match: exact match
    *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
  On-Carrier Device vs AMC slot A2
   AMC slot A2 port 0 ==> On-Carrier Device 0 port 3
    Matching Result
    - From On-Carrier Device ID 0
-    -Channel ID 9 || Lane 0: enable
-    -Link Type: AMC.2 Ethernet
-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-    -Link Group ID: 0 || Link Asym. Match: exact match
+    \-Channel ID 9 || Lane 0: enable
+    \-Link Type: AMC.2 Ethernet
+    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+    \-Link Group ID: 0 || Link Asym. Match: exact match
    - To AMC slot A2
-    -Channel ID 0 || Lane 0: enable
-    -Link Type: AMC.2 Ethernet
-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-    -Link Group ID: 0 || Link Asym. Match: exact match
+    \-Channel ID 0 || Lane 0: enable
+    \-Link Type: AMC.2 Ethernet
+    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+    \-Link Group ID: 0 || Link Asym. Match: exact match
    *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
  AMC slot B1 vs AMC slot A2
   AMC slot A2 port 2 ==> AMC slot B1 port 2
    Matching Result
    - From AMC slot B1
-    -Channel ID 2 || Lane 0: enable
-    -Link Type: AMC.3 Storage
-    -Link Type extension: Serial Attached SCSI (SAS/SATA)
-    -Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
+    \-Channel ID 2 || Lane 0: enable
+    \-Link Type: AMC.3 Storage
+    \-Link Type extension: Serial Attached SCSI (SAS/SATA)
+    \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
    - To AMC slot A2
-    -Channel ID 2 || Lane 0: enable
-    -Link Type: AMC.3 Storage
-    -Link Type extension: Serial Attached SCSI (SAS/SATA)
-    -Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
+    \-Channel ID 2 || Lane 0: enable
+    \-Link Type: AMC.3 Storage
+    \-Link Type extension: Serial Attached SCSI (SAS/SATA)
+    \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
  *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
 .TP
 \fIunmatch\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
@@ -2981,7 +2981,7 @@
 
 Execute the service processor command line interface commands.
 Without any command string, an interactive session is started
-in the service processor command line environ ment.  If a
+in the service processor command line environment.  If a
 command string is specified, the command string is executed
 on the service processor and the connection is closed.
 .TP
@@ -3376,7 +3376,7 @@
 The ipmitool \fIfree\fP interface utilizes the FreeIPMI libfreeipmi
 drivers.  
 .LP
-You can tell ipmitool to use the FreeIPMI interface with the -I option:
+You can tell ipmitool to use the FreeIPMI interface with the \-I option:
 .PP
 ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
 
@@ -3386,7 +3386,7 @@
 The ipmitool \fIimb\fP interface supports the Intel IMB (Intel
 Inter-module Bus) Interface through the /dev/imb device.  
 .LP
-You can tell ipmitool to use the IMB interface with the -I option:
+You can tell ipmitool to use the IMB interface with the \-I option:
 .PP
 ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>