Remove misspelled debian/ipmiutuil.ipmi_port.init

1 files changed, 0 insertions, 187 deletions

diff --git a/debian/ipmiutuil.ipmi_port.init b/debian/ipmiutuil.ipmi_port.init
deleted file mode 100755
index 85539ea..0000000
--- a/debian/ipmiutuil.ipmi_port.init
+++ /dev/null
@@ -1,187 +0,0 @@
-#! /bin/sh
-#
-# ipmi_port         
-#
-# chkconfig: 345 91 07
-# description: ipmi_port reserves the IPMI RMCP port 623 from portmap
-#		which prevents portmap from trying to use port 623.
-# 		This script also applies any saved IPMI thresholds, and
-#		copies the bmclanpet.mib to where SNMP can find it.
-#		It is recommended that this service be started for
-#		all systems with ipmiutil that also have portmap.
-#
-### BEGIN INIT INFO
-# Provides: ipmi_port
-# Required-Start: $local_fs $network $remote_fs
-# Required-Stop:  $local_fs $network $remote_fs
-# Default-Start: 3 4 5 3 4 5  
-# Default-Stop:  0 1 2 6  0 1 2 6   
-# Short-Description: ipmi_port reserves the RMCP port from portmap
-# Description: ipmi_port is used to reserve the RMCP port from portmap
-### END INIT INFO
-#
-#if [ -f /etc/init.d/functions ]; then
-# Source function library.
-#. /etc/init.d/functions
-#fi
-
-name=ipmi_port
-progdir=/usr/sbin
-prog="$progdir/$name"
-lockfile=/var/lock/subsys/$name
-portmap=/etc/init.d/portmap
-shardir=/usr/share
-mibdir=$shardir/snmp/mibs
-datadir=$shardir/ipmiutil
-vardir=/var/lib/ipmiutil
-ifout=${vardir}/ipmi_if.txt
-sensorout=${vardir}/sensor_out.txt
-threshout=${vardir}/thresh_out.txt
-# This threshold script could be created by ipmiutil sensor -p ...
-thresh="${vardir}/thresholds.sh"
-
-getpid () {
-    # This is messy if the parent script is same name as $1
-    p=`ps -ef |grep "$1" |grep -v grep |awk '{print $2}'`
-    echo $p
-}
-
-start()
-{
-	echo -n $"Starting $name: "
-	echo
-	retval=1
-	PID=0
-        
-	mkdir -p $vardir
-	# if [ ! -f $ifout ]; then
-	   # ${datadir}/ipmi_if.sh
-	# fi 
-	if [ ! -f $sensorout ]; then
-	   # Capture a snapshot of IPMI sensor data for later reuse.
-	   ipmiutil sensor -q >$sensorout
-	fi
-	if [ -f $thresh ]
-	then
-	   # apply saved IPMI sensor thresholds, if any
-	   sh $thresh >$threshout 2>&1
-	fi
-	if [ -d ${mibdir} ]
-	then
-	   # put bmclanpet MIB where SNMP can find it
-	   cp -f $datadir/bmclanpet.mib ${mibdir}/BMCLAN-PET-MIB.txt
-	fi
-
-	dpc=`getpid dpcproxy`
-	if [ "x${dpc}" != "x" ]
-	then
-	   echo "$name: dpcproxy is already running on port 623,"
-	   echo "so $name is not needed."
-	   retval=6
-	else
-	   [ -x $portmap ] || exit 6
-	   [ -x $prog ] || exit 5
-	   $prog -b
-	   retval=$?
-	   if [ $retval -eq 0 ]; then
-	        PID=`getpid "$prog -b"`
-		echo $PID >$lockfile
-	   fi
-	fi
-	echo
-	return $retval
-}
-
-stop()
-{
-	echo -n $"Stopping $name: "
-	echo
-        retval=1
-	if [ -f $lockfile ]; then
-           p=`cat $lockfile`
-           if [ "x$p" = "x" ]; then
-	        p=`getpid "$prog -b"`
-           fi
-           if [ "x$p" != "x" ]; then
-                kill $p
-                retval=$?
-           fi
-        fi
-	echo
-	if [ -d ${mibdir} ]; then
-	   rm -f ${mibdir}/BMCLAN-PET-MIB.txt
-	fi
-	[ $retval -eq 0 ] && rm -f $lockfile
-	return $retval
-}
-
-restart()
-{
-	stop
-	start
-}
-
-rh_status() {
-    if [ -f $lockfile ]; then
-        p=`cat $lockfile`
-        if [ "x$p" != "x" ]; then
-           pid=`getpid $p`
-           if [ "x$pid" != "x" ]; then
-              echo "$name (pid $pid) is running..."
-              retval=0
-           else
-              echo "$name is dead but $lockfile exists"
-              retval=1
-	   fi
-        else
-           echo "$name $lockfile exists but is empty"
-           retval=2
-        fi
-    else
-        echo "$name is stopped"
-        retval=3
-    fi
-    return $retval
-}
-
-rh_status_q() {
-    rh_status >/dev/null 2>&1
-}
-
-if [ ! -d /var/lock/subsys ]; then
-   lockfile=/var/run/$name.pid
-fi
-
-case "$1" in
-  start)
-        rh_status_q && exit 0
-	start
-	;;
-  stop)
-        rh_status_q || exit 0
-	stop
-	;;
-  status)
-	rh_status 
-	;;
-  restart)
-	restart
-	;;
-  reload)
-        rh_status_q || exit 7
-	restart
-	;;
-  force_reload)
-	restart
-	;;
-  condrestart|try-restart)
-	rh_status_q || exit 0
-	restart
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
-	exit 2
-esac
-
-exit $?
-