Imported Upstream version 2.9.3upstream/2.9.3

1 files changed, 177 insertions, 0 deletions

diff --git a/doc/idelloem.8 b/doc/idelloem.8
new file mode 100644
index 0000000..997fe16
--- /dev/null
+++ b/doc/idelloem.8
@@ -0,0 +1,177 @@
+.TH IDELLOEM 8 "Version 1.0: 17 Aug 2011"
+.SH NAME
+ipmiutil_delloem \- OEM commands for Dell servers
+.SH SYNOPSIS
+.B "ipmiutil delloem [-mx -NPRUEFJTVY] commands"
+
+.SH DESCRIPTION
+.I ipmiutil delloem commands
+is a program that uses Dell OEM IPMI commands to
+perform platform-specific functions.
+
+.SH OPTIONS
+
+.IP "-m 002000"
+Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00).
+This could be used for PICMG or ATCA blade systems.
+The trailing character, if present, indicates SMI addressing if 's',
+or IPMB addressing if 'i' or not present.
+.IP "-x"
+Causes extra debug messages to be displayed.
+.IP "-N nodename"
+Nodename or IP address of the remote target system.  If a nodename is
+specified, IPMI LAN interface is used.  Otherwise the local system
+management interface is used.
+.IP "-P/-R rmt_pswd"
+Remote password for the nodename given.  The default is a null password.
+.IP "-U rmt_user"
+Remote username for the nodename given.  The default is a null username.
+.IP "-E"
+Use the remote password from Environment variable IPMI_PASSWORD.
+.IP "-F drv_t"
+Force the driver type to one of the followng:
+imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
+Note that lan2i means lan2 with intelplus.
+The default is to detect any available driver type and use it.
+.IP "-J"
+Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
+1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
+5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
+Default is 3.
+.IP "-T"
+Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
+.IP "-V"
+Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
+.IP "-Y"
+Yes, do prompt the user for the IPMI LAN remote password.
+Alternatives for the password are \-E or \-P.
+
+.SH COMMANDS
+
+.RS
+.RE
+.TP
+\fImac\fP \fIlist\fP
+.RS
+   Lists the MAC address of LOMs
+
+.RE
+.TP
+\fImac\fP \fIget\fP <\fBNIC number\fR>
+.RS
+   Shows the MAC address of specified LOM. 0-7 System LOM, 8- DRAC/iDRAC.
+
+.RE
+.TP
+\fIlan\fP \fIset\fP <\fBMode\fR>
+.RS
+   Sets the NIC Selection Mode (dedicated, shared,
+       shared with failover lom2, shared with Failover all loms).
+
+.RE
+.TP
+\fIlan\fP \fIget\fP
+.RS
+   Returns the current NIC Selection Mode (dedicated, shared,
+    shared with failover lom2, shared with Failover all loms).
+
+.RE
+.TP
+\fIlan\fP \fIget\fP  \fIactive\fP
+.RS
+   Returns the current active NIC (dedicated, LOM1, LOM2, LOM3, LOM4).
+
+.RE
+.TP
+\fIpowermonitor\fP
+.RS
+   Shows power tracking statistics
+
+.RE
+.TP
+\fIpowermonitor\fP \fIclear\fP  \fIcumulativepower\fP
+.RS
+   Reset cumulative power reading
+
+.RE
+.TP
+\fIpowermonitor\fP \fIclear\fP  \fIpeakpower\fP
+.RS
+   Reset peak power reading
+
+.RE
+.TP
+\fIpowermonitor\fP \fIpowerconsumption\fP
+.RS
+   Displays power consumption in <watt|btuphr>
+
+.RE
+.TP
+\fIpowermonitor\fP \fIpowerconsumptionhistory\fP  <\fBwatt|btuphr\fR>
+.RS
+   Displays power consumption history
+
+.RE
+.TP
+\fIpowermonitor\fP \fIgetpowerbudget\fP
+.RS
+   Displays power cap in <watt|btuphr>
+
+.RE
+.TP
+\fIpowermonitor\fP \fIsetpowerbudget\fP  <\fBval\fR> <\fBwatt|btuphr|percent\fR>
+.RS
+   Allows user to set the  power cap in <watt|BTU/hr|percentage>
+
+.RE
+.TP
+\fIpowermonitor\fP \fIenablepowercap\fP
+.RS
+   To enable set power cap
+
+.RE
+.TP
+\fIpowermonitor\fP \fIdisablepowercap\fP
+.RS
+   To disable set power cap
+
+.RE
+.TP
+\fIwindbg\fP \fIstart\fP
+.RS
+   Starts the windbg session (Cold Reset & SOL Activation)
+
+.RE
+.TP
+\fIwindbg\fP \fIend\fP
+.RS
+   Ends the windbg session (SOL Deactivation)
+
+.RE
+.TP
+\fIvFlash\fP \fIinfo\fP \fICard\fP
+.RS
+   Shows Extended SD Card information
+.RE
+
+
+.SH "SEE ALSO"
+ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8)
+
+.SH WARNINGS
+See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
+
+.SH COPYRIGHT
+Copyright (C) 2009  Kontron America, Inc.
+.PP
+See the file COPYING in the distribution for more details
+regarding redistribution.
+.PP
+This utility is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY.
+
+.SH AUTHOR
+.PP
+Andy Cress <arcress at users.sourceforge.net>
+.br
+