New upstream version 3.1.2upstream/3.1.2

1 files changed, 35 insertions, 33 deletions

diff --git a/doc/iseltime.8 b/doc/iseltime.8
index eb9a705..1b51f0b 100644
--- a/doc/iseltime.8
+++ b/doc/iseltime.8
@@ -1,53 +1,53 @@
-.TH ISELTIME 8 "Version 1.0: 01 Apr 2013"
+.TH ISELTIME 8 "Version 1.0: 13 Jul 2018"
 .SH NAME
-iseltime \- synchronize BMC SEL time with OS system time
+iseltime \- synchronize BIOS RTC and firmware SEL time from system time
 .SH SYNOPSIS
-.B "seltime [-sx -NUPRETVF]"
+.B "iseltime [-sx -N node -U user -P/-R pswd -EFJTVYZ]"
 
 .SH DESCRIPTION
-.I seltime
-is a program that uses IPMI commands to 
-set the BMC SEL time from the OS system time.
-The OS system time should be in sync with the BIOS Real-Time-Clock.
-The OS system time may also be kept from drifting via an NTP server.
-Normally the BIOS will set the BMC time from the RTC during boot, but
-running this command may be necessary periodically if the system 
-does not reboot for many weeks, for instance.
-Note that this command should not be run too frequently to avoid
-BMC timing issues.  Once per day should be sufficient.
+.I iseltime
+is a program that allows synchronizing the hardware time values for 
+RTC (BIOS Real-Time-Clock) and SEL (IPMI firmware SEL time) with 
+the OS system time.  Run without options, iseltime shows each of these times 
+to show whether they are the same or not.  
 
-Run with no options, this command reads the BMC SEL time without
-setting anything.
-
-This utility can use either the /dev/ipmi0 openipmi driver, 
-the /dev/imb Intel driver, the /dev/ipmikcs valinux driver,
-a driverless interface, or IPMI LAN.
+The OS system time should be in sync with the BIOS Real-Time-Clock.  
+The OS system time may also be kept from drifting via an NTP server.  
+Normally the BIOS will set the firmware SEL time from the RTC during boot, 
+but running this command may be necessary periodically if the system does 
+not reboot for a long time, for instance.  
+Note that some applications may not handle setting the time backward well.
+Note that  this command should not be run too frequently to avoid firmware 
+timing issues.	It should not be set more than once per day.
 
 .SH OPTIONS
-.IP "-s"
-Sets the SEL time (no more than once a day).
+Command line options are described below.
+.IP "-s" 
+Set the RTC and IPMI firmware SEL time to match the system time.  
+This should not be performed more often than once a day.  
+
 .IP "-x"
 Causes eXtra debug messages to be displayed.
-
 .IP "-N nodename"
-Nodename of the remote target system.  If a nodename is specified,
-IPMI LAN interface is used.  Otherwise the local system management
-interface is used.
-.IP "-P/-R password"
-Remote password for the nodename given.  The default is a null password.
-.IP "-U username"
+Nodename or IP address of the remote target system.  If a nodename is
+specified, IPMI LAN interface is used.  Otherwise the local system
+management interface is used.
+.IP "-U rmt_user"
 Remote username for the nodename given.  The default is a null username.
+.IP "-P/-R rmt_pswd"
+Remote password for the nodename given.  The default is a null password.
 .IP "-E"
 Use the remote password from Environment variable IPMI_PASSWORD.
 .IP "-F drv_t"
-Force the driver type to one of the followng:
+Force the driver type to one of the followng:  
 imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
 Note that lan2i means lan2 with intelplus.
 The default is to detect any available driver type and use it.
 .IP "-J"
-Use the specified LanPlus cipher suite (0 thru 14): 0=none/none/none,
+Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
 1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
 5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
+Default is 3.
 .IP "-T"
 Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
 .IP "-V"
@@ -55,16 +55,18 @@ Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Oper
 .IP "-Y"
 Yes, do prompt the user for the IPMI LAN remote password.
 Alternatives for the password are -E or -P.
+.IP "-Z"
+Set the slave address for a local MC
 
 
 .SH "SEE ALSO"
-ipmiutil(8) isel(8) ievents(8) icmd(8) 
+ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) 
 
 .SH WARNINGS
-See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
+See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. 
 
 .SH COPYRIGHT
-Copyright (C) 2013  Kontron America, Inc.
+Copyright (C) 2009  Kontron America, Inc.
 .PP
 See the file COPYING in the distribution for more details
 regarding redistribution.