Imported Upstream version 2.9.3upstream/2.9.3

1 files changed, 543 insertions, 0 deletions

diff --git a/util/ipmicmd.h b/util/ipmicmd.h
new file mode 100644
index 0000000..b65e949
--- /dev/null
+++ b/util/ipmicmd.h
@@ -0,0 +1,543 @@
+/*M*
+//  PVCS:
+//      $Workfile:   ipmicmd.h  $
+//      $Revision:   1.0  $
+//      $Modtime:   22 Jul 2002 08:51:14  $
+//      $Author:   arcress  $  
+//
+//  10/24/02 arcress - made cmd param ushort to be more unique
+//
+ *M*/
+/*----------------------------------------------------------------------*
+The BSD License 
+
+Copyright (c) 2002, Intel Corporation
+Copyright (c) 2009 Kontron America, Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without 
+modification, are permitted provided that the following conditions are met:
+
+  a.. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer. 
+  b.. Redistributions in binary form must reproduce the above copyright notice,
+      this list of conditions and the following disclaimer in the documentation 
+      and/or other materials provided with the distribution. 
+  c.. Neither the name of the copyright holder nor the names of its contributors
+      may be used to endorse or promote products derived from this software 
+      without specific prior written permission. 
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *----------------------------------------------------------------------*/
+
+#define uchar   unsigned char
+#define uint32  unsigned int
+#define uint64  unsigned long
+// #ifdef __USE_MISC
+/* Can use compatibility names for C types. (from sys/types.h) */
+// typedef unsigned long int  ulong;
+// typedef unsigned short int ushort;
+// typedef unsigned int       uint;
+// #else
+#ifndef ushort
+#define ushort  unsigned short
+#define ulong   unsigned long
+#define uint    unsigned int
+#endif
+
+#ifdef WIN32
+#define snprintf _snprintf
+#define SockType   SOCKET
+#define SockInvalid INVALID_SOCKET
+#else
+#define SockType   int
+#define SockInvalid -1
+#endif
+
+// Other IPMI values
+#define PUBLIC_BUS      0
+#define PRIVATE_BUS  0x03
+#define BMC_SA       0x20
+#define BMC_LUN         0
+#define SMS_LUN         2
+#define HSC_SA       0xC0
+#define ME_SA        0x2C
+#define ME_BUS       0x06
+
+#define ADDR_SMI     1
+#define ADDR_IPMB    2
+
+#define ACCESS_OK    0
+#define IPMI_REQBUF_SIZE       255
+#define IPMI_RSPBUF_SIZE       250  // was 80, then 1024, see MAX_BUFFER_SIZE 
+#define IPMI_LANBUF_SIZE       200  // see RS_LEN_MAX for IPMI LAN
+
+// IPMI NetFn types, see Table 5-1
+#define NETFN_CHAS   0x00  // chassis
+#define NETFN_BRIDGE 0x02  // bridge
+#define NETFN_SEVT   0x04  // sensor/event
+#define NETFN_APP    0x06  // application
+#define NETFN_FW     0x08  // firmware
+#define NETFN_STOR   0x0a  // storage
+#define NETFN_TRANS  0x0c  // transport
+#define NETFN_SOL    0x34  // serial-over-lan (in IPMI 2.0, use TRANS)
+#define NETFN_PICMG  0x2c  // for ATCA PICMG systems
+
+#ifndef IMBAPI_H__ 
+// special IMB defines, duplicates if imb_api.h
+#define MAX_BUFFER_SIZE        255
+#define MAX_SDR_SIZE           128
+#define GET_DEVICE_ID           (0x01 | (NETFN_APP << 8))
+#define WRITE_READ_I2C          (0x52 | (NETFN_APP << 8)) /*=MASTER_WRITE_READ*/
+#endif
+
+#define PSW_MAX                 20  /* IPMI Passwords max = 16 or 20 bytes*/
+/* IPMI Commands, see Table 38-8, combined CMD and NETFN in unsigned short */
+#define CMDMASK   0xff      /* mask to leave only the command part */
+#define WATCHDOG_RESET  	(0x22 | (NETFN_APP << 8))
+#define WATCHDOG_SET    	(0x24 | (NETFN_APP << 8))
+#define WATCHDOG_GET    	(0x25 | (NETFN_APP << 8))
+#define GET_SYSTEM_GUID 	(0x37 | (NETFN_APP << 8))
+#define SET_CHANNEL_ACC 	(0x40 | (NETFN_APP << 8))
+#define GET_CHANNEL_ACC	        (0x41 | (NETFN_APP << 8))
+#define GET_CHANNEL_INFO        (0x42 | (NETFN_APP << 8))
+#define SET_USER_ACCESS         (0x43 | (NETFN_APP << 8))
+#define GET_USER_ACCESS         (0x44 | (NETFN_APP << 8))
+#define SET_USER_NAME           (0x45 | (NETFN_APP << 8))
+#define GET_USER_NAME           (0x46 | (NETFN_APP << 8))
+#define SET_USER_PASSWORD       (0x47 | (NETFN_APP << 8))
+#define MASTER_WRITE_READ       (0x52 | (NETFN_APP << 8))
+// #define SET_PEF_ENABLE       0xA1  /* NETFN_APP (old) */
+#define CHASSIS_STATUS          0x01  /* NETFN_CHAS (=00) */
+#define CHASSIS_CTL             0x02  /* NETFN_CHAS (=00) */
+#define CHASSIS_IDENTIFY        0x04  /* NETFN_CHAS (=00) */
+#define SET_BOOT_OPTIONS        0x08  /* NETFN_CHAS (=00) */
+#define GET_BOOT_OPTIONS        0x09  /* NETFN_CHAS (=00) */
+#define GET_POWERON_HOURS       0x0F  /* NETFN_CHAS (=00) */
+#define GET_PEF_CONFIG          (0x13 | (NETFN_SEVT << 8))
+#define SET_PEF_CONFIG          (0x12 | (NETFN_SEVT << 8))
+#define GET_DEVSDR_INFO		(0x20 | (NETFN_SEVT << 8))
+#define GET_DEVICE_SDR		(0x21 | (NETFN_SEVT << 8))
+#define RESERVE_DEVSDR_REP	(0x22 | (NETFN_SEVT << 8))
+#define SET_SEVT_ENABLE		(0x28 | (NETFN_SEVT << 8))
+#define GET_SEVT_ENABLE		(0x29 | (NETFN_SEVT << 8))
+#define REARM_SENSOR		(0x2A | (NETFN_SEVT << 8))
+#define GET_FRU_INV_AREA        (0x10 | (NETFN_STOR << 8))
+#define READ_FRU_DATA           (0x11 | (NETFN_STOR << 8))
+#define WRITE_FRU_DATA          (0x12 | (NETFN_STOR << 8))
+
+#define GET_SENSOR_READING_FACTORS (0x23 | (NETFN_SEVT << 8))
+#define SET_SENSOR_HYSTERESIS	(0x24 | (NETFN_SEVT << 8))
+#define GET_SENSOR_HYSTERESIS	(0x25 | (NETFN_SEVT << 8))
+#define SET_SENSOR_THRESHOLD	(0x26 | (NETFN_SEVT << 8))
+#define GET_SENSOR_THRESHOLD	(0x27 | (NETFN_SEVT << 8))
+#define GET_SENSOR_EVT_ENABLE	(0x29 | (NETFN_SEVT << 8))
+#define REARM_SENSOR_EVENTS	(0x2A | (NETFN_SEVT << 8))
+#define GET_SENSOR_EVT_STATUS	(0x2B | (NETFN_SEVT << 8))
+#define GET_SENSOR_READING	(0x2D | (NETFN_SEVT << 8))
+#define GET_SENSOR_TYPE 	(0x2F | (NETFN_SEVT << 8))
+
+#define SET_LAN_CONFIG          (0x01 | (NETFN_TRANS << 8))
+#define GET_LAN_CONFIG          (0x02 | (NETFN_TRANS << 8))
+#define GET_LAN_STATS           (0x04 | (NETFN_TRANS << 8))
+#define SET_SER_CONFIG          (0x10 | (NETFN_TRANS << 8))
+#define GET_SER_CONFIG          (0x11 | (NETFN_TRANS << 8))
+#define SET_SER_MUX             (0x12 | (NETFN_TRANS << 8))
+#define GET_SEL_INFO            (0x40 | (NETFN_STOR << 8))
+#define GET_SEL_ALLOCATION_INFO (0x41 | (NETFN_STOR << 8))
+#define RESERVE_SEL             (0x42 | (NETFN_STOR << 8))
+#define GET_SEL_ENTRY           (0x43 | (NETFN_STOR << 8))
+#define CLEAR_SEL               (0x47 | (NETFN_STOR << 8))
+#define GET_SEL_TIME     	(0x48 | (NETFN_STOR << 8))
+#define GET_SDR_REPINFO		(0x20 | (NETFN_STOR << 8))
+#define RESERVE_SDR_REP         (0x22 | (NETFN_STOR << 8))
+#define GET_SDR			(0x23 | (NETFN_STOR << 8))
+#define ACTIVATE_SOL1		(0x01 | (NETFN_SOL << 8))
+#define SET_SOL_CONFIG		(0x03 | (NETFN_SOL << 8))
+#define GET_SOL_CONFIG		(0x04 | (NETFN_SOL << 8))
+#define ACTIVATE_SOL2		(0x20 | (NETFN_TRANS << 8))
+#define SET_SOL_CONFIG2		(0x21 | (NETFN_TRANS << 8))
+#define GET_SOL_CONFIG2		(0x22 | (NETFN_TRANS << 8))
+#define READ_EVENT_MSGBUF	(0x35 | (NETFN_APP << 8))
+#define GET_EVENT_RECEIVER	(0x01 | (NETFN_SEVT << 8))
+#define SMS_OS_REQUEST 		0x10 /*(0x10 | (NETFN_APP << 8)) */
+#define CMD_GET_SESSION_INFO     0x3D /* NETFN_APP */
+#define CMD_SET_SYSTEM_INFO      0x58 /* NETFN_APP */
+#define CMD_GET_SYSTEM_INFO      0x59 /* NETFN_APP */
+/*
+ Other commands used for IPMI LAN:
+    GET_CHAN_AUTH  (0x38 | (NETFN_APP << 8))
+    GET_SESS_CHAL  (0x39 | (NETFN_APP << 8))
+    ACT_SESSION    (0x3A | (NETFN_APP << 8))
+    SET_SESS_PRIV  (0x3B | (NETFN_APP << 8))
+    CLOSE_SESSION  (0x3C | (NETFN_APP << 8))
+ */
+
+#define IPMB_CLEAR_MSGF           0x30
+#define IPMB_GET_MESSAGE          0x33
+#define IPMB_SEND_MESSAGE         0x34
+
+#define PICMG_SLAVE_BUS           0x40 
+/* commands under NETFN_PICMG */
+#define PICMG_GET_PROPERTIES      0x00   
+#define PICMG_GET_LED_PROPERTIES  0x05
+#define PICMG_SET_LED_STATE       0x07
+#define PICMG_GET_LED_STATE       0x08
+#define PICMG_ID               0x00
+ 
+/* structure used by ipmi_cmd(), not used by ipmi_cmdraw */
+#define NCMDS   62  
+typedef struct {
+ ushort cmdtyp;
+ uchar sa;
+ uchar bus;
+ uchar netfn;
+ uchar lun;
+ uchar len;  /*length of request data (FYI, but not used here) */
+ uchar rslen;  /*length of response data expected (not including ccode) */
+} ipmi_cmd_t;
+
+struct valstr {
+        ushort val;
+        const char * str;
+};
+
+struct oemvalstr {
+        uint   oem;
+	ushort val;
+        const char * str;
+};
+
+/* IPMI driver types returned by get_driver_type() */
+#define NDRIVERS   15
+#define DRV_UNKNOWN 0
+#define DRV_IMB   1
+#define DRV_VA    2
+#define DRV_MV    3
+#define DRV_GNU   4
+#define DRV_LD    5  /*LANDesk*/
+#define DRV_LAN   6  /*IPMI LAN 1.5*/
+#define DRV_KCS   7  /*direct KCS*/
+#define DRV_SMB   8  /*direct SMBus/SSIF*/
+#define DRV_LAN2  9  /*LANplus, IPMI LAN 2.0*/
+#define DRV_MS    10 /*Microsoft ipmidrv.sys*/
+#define DRV_BMC   11 /*Solaris 10 bmc */
+#define DRV_SMC   12 /*SuperMicro Computer LAN mode*/
+#define DRV_LIPMI 13 /*Solaris 8/9 lipmi */
+#define DRV_LAN2I 14 /*LANplus with Intel OEM */
+#define DRV_EFI   15 /*Intel EFI, ipmi.efi*/
+#define DRV_IBM   16 /*LAN with IBM OEM mode*/
+#define DRV_HP    17 /*LANplus with HP OEM mode*/
+
+/* Event severity codes, used in ievents.c and oem*.c */
+#define SEV_INFO  0
+#define SEV_MIN   1
+#define SEV_MAJ   2
+#define SEV_CRIT  3
+
+/* Errors returned by ipmiutil functions, lan, etc, see decode_rv() */
+#define ERR_BAD_LENGTH     -24 /*length < MIN */
+#define ERR_BAD_FORMAT     -23 /*bad format*/
+#define ERR_USAGE          -22 /*usage/help requested*/
+#define ERR_NOT_FOUND      -21 /*requested item not found*/
+#define ERR_FILE_OPEN      -20 /*cannot open file*/
+#define LAN_ERR_DROPPED    -19 /*Remote BMC dropped the connection*/
+#define ERR_NOT_ALLOWED    -18 /*access not allowed*/
+#define ERR_BAD_PARAM      -17 /*invalid parameter*/
+#define ERR_NO_DRV         -16 /*cannot open IPMI driver*/
+#define LAN_ERR_V2         -15 /*BMC only supports IPMI 2.0*/
+#define LAN_ERR_V1         -14 /*BMC only supports IPMI 1.x*/
+#define LAN_ERR_OTHER      -13
+#define LAN_ERR_PING       -12 /*error with ping*/
+#define LAN_ERR_HOSTNAME   -11 /*error resolving hostname*/
+#define LAN_ERR_TOO_SHORT  -10 /*recv data too short */
+#define LAN_ERR_NOTSUPPORT -9  /*slave address != 0x20, not supported now */
+#define LAN_ERR_INVPARAM   -8  /*null pointers, etc. */
+#define LAN_ERR_BADLENGTH  -7  /*length > MAX */
+#define LAN_ERR_TIMEOUT    -6  /*timeout signal(SIGALRM) recvd */
+#define LAN_ERR_ABORT      -5  /*abort signal(SIGINT) recvd */
+#define LAN_ERR_CONNECT    -4  /*problem connecting to BMC*/
+#define LAN_ERR_RECV_FAIL  -3  /*receive failed, usually no response*/
+#define LAN_ERR_SEND_FAIL  -2  /*send failed */
+#define ERR_BMC_MSG      -504  /*error getting message from BMC*/
+                   /* see ipmidir.h: ERGETTINGIPMIMESSAGE -504 */
+
+/* values used to request AUTHTYPE */
+#define IPMI_SESSION_AUTHTYPE_NONE      0x00
+#define IPMI_SESSION_AUTHTYPE_MD2       0x01
+#define IPMI_SESSION_AUTHTYPE_MD5       0x02
+#define IPMI_SESSION_AUTHTYPE_PASSWORD  0x04
+#define IPMI_SESSION_AUTHTYPE_OEM       0x05
+#define AUTHTYPE_INIT      0xFF     /*initial value, not set*/
+/* mask values used for AUTHTYPE support */
+#define IPMI_MASK_AUTHTYPE_NONE      0x01
+#define IPMI_MASK_AUTHTYPE_MD2       0x02
+#define IPMI_MASK_AUTHTYPE_MD5       0x04
+#define IPMI_MASK_AUTHTYPE_PASSWORD  0x10
+#define IPMI_MASK_AUTHTYPE_OEM       0x20
+
+#define IPMI_PRIV_LEVEL_OEM      0x05
+#define IPMI_PRIV_LEVEL_ADMIN    0x04
+#define IPMI_PRIV_LEVEL_OPERATOR 0x03
+#define IPMI_PRIV_LEVEL_USER     0x02
+#define IPMI_PRIV_LEVEL_CALLBACK 0x01
+
+#define VENDOR_INTEL    0x000157   /*=343.*/
+#define VENDOR_KONTRON  0x003A98   /*=15000*/
+#define VENDOR_NSC      0x000322
+#define VENDOR_LMC      0x000878
+#define VENDOR_TYAN     0x0019FD
+#define VENDOR_NEC      0x000077
+#define VENDOR_SUPERMICRO 0x002A7C /*=10876.*/
+#define VENDOR_PEPPERCON 0x0028C5  /*used in SuperMicro AOC-SIMSO*/
+#define VENDOR_FUJITSU   0x002880  /*Fujitsu-Siemens*/
+#define VENDOR_MICROSOFT 0x000137  /* 311. */
+#define VENDOR_SUN       0x00002A
+#define VENDOR_DELL      0x0002A2 
+#define VENDOR_HP        0x00000B
+#define VENDOR_IBM       0x000002
+#define VENDOR_SUPERMICROX 0x00B980 /*=47488. used for Winbond/SuperMicro */
+#define VENDOR_MAGNUM    5593      /* Magnum Technologies, also SuperMicro */
+#define VENDOR_QUANTA    7244
+#define VENDOR_XYRATEX   1993
+#define VENDOR_NEWISYS   9237
+#define VENDOR_CISCO     5771      /*=0x168B*/
+
+#define PRODUCT_QUANTA_S99Q   21401
+#define PRODUCT_QUANTA_QSSC_S4R  64  /*0x0040*/
+
+#define URNLOOPS   1000  /* default is 300 ms, Urbanna needs 1000 ms */
+#define LOG_MSG_LENGTH   1024   /*max len of log message*/
+#define SZGNODE  80  /* max len of a nodename */
+
+#define BDELIM  '|'   /*delimeter for canonical output*/
+#define BCOMMA  ','   /*delimeter for CSV output*/
+#define BCOLON  ':'   /*delimeter some output with colons*/
+#define BCOMMENT '#'  /*delimeter '#' used for comments */
+
+#ifndef LOG_WARN
+#define LOG_EMERG       0     //  system is unusable
+#define LOG_ALERT       1     //  action must be taken immediately
+#define LOG_CRIT        2     //  critical conditions
+#define LOG_ERR         3     //  error conditions
+#define LOG_WARN        4     //  warning conditions
+#define LOG_NOTICE      5     //  normal but significant condition
+#define LOG_INFO        6     //  informational
+#define LOG_DEBUG       7     //  debug-level messages
+#endif
+
+#ifndef _IPMI_RQ_
+#define _IPMI_RQ_  1
+/* structure used in ipmi_sendrecv, maps to ipmitool syntax. */
+struct ipmi_rq {
+        struct {
+                uchar netfn:6;
+                uchar lun:2;
+                uchar cmd;
+                uchar target_cmd;
+                ushort data_len;
+                uchar *data;
+        } msg;
+};
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif 
+/* ------------------------ SUBROUTINES ------------------------- */
+
+/*
+ * ipmi_cmd
+ * ushort cmd    (input): (netfn << 8) + command
+ * uchar *pdata  (input): pointer to ipmi data
+ * int   sdata   (input): size of ipmi data
+ * uchar *presp (output): pointer to response data buffer
+ * int *sresp   (input/output): on input, size of response buffer,
+ *                              on output, length of response data
+ * uchar *cc    (output): completion code
+ * char fdebugcmd(input): flag =1 if debug output desired
+ * returns 0 if successful, <0 if error
+ */
+int ipmi_cmd(ushort cmd, uchar *pdata,  int sdata, uchar *presp,
+		int *sresp, uchar *pcc, char fdebugcmd);   
+/*
+ * ipmi_cmdraw
+ * uchar cmd     (input): IPMI Command
+ * uchar netfn   (input): IPMI NetFunction
+ * uchar sa      (input): IPMI Slave Address of the MC
+ * uchar bus     (input): BUS  of the MC
+ * uchar lun     (input): IPMI LUN
+ * uchar *pdata  (input): pointer to ipmi data
+ * int   sdata   (input): size of ipmi data
+ * uchar *presp (output): pointer to response data buffer
+ * int *sresp   (input/output): on input, size of response buffer,
+ *                              on output, length of response data
+ * uchar *cc    (output): completion code
+ * char fdebugcmd(input): flag =1 if debug output desired
+ * returns 0 if successful, <0 if error
+ */
+int ipmi_cmdraw(uchar cmd, uchar netfn, uchar sa, uchar bus, uchar lun,
+		uchar *pdata, int sdata, uchar *presp,
+		int *sresp, uchar *pcc, char fdebugcmd);
+/*
+ * ipmi_close_
+ * Called to close an IPMI session.
+ * returns 0 if successful, <0 if error
+ */
+int ipmi_close_(void);
+int ipmi_close(void);  /*ditto*/
+/*-----------------------------------------------------------------*
+ * These externals are conditionally compiled in ipmicmd.c 
+   ipmi_cmdraw_ia()    Intel IMB driver, /dev/imb 
+   ipmi_cmdraw_mv()    MontaVista OpenIPMI driver
+   ipmi_cmdraw_va()    VALinux driver
+   ipmi_cmdraw_ld()    LANDesk driver
+   ipmi_cmdraw_direct() Direct/Driverless KCS or SSIF
+   ipmi_cmdraw_lan()   IPMI LAN
+   ipmi_cmdraw_lan2()  IPMI LANplus (RMCP+ in IPMI 2.0)
+ *-----------------------------------------------------------------*/
+
+/*
+ * parse_lan_options
+ * Parse the IPMI LAN options from the command-line getopt.
+ * int  c        (input): command-line option from getopt, one of:
+	  case 'F':  force driver type 
+          case 'T':  auth type 
+          case 'V':  priv level 
+          case 'J':  cipher suite
+          case 'N':  nodename 
+	  case 'U':  username
+	  case 'R':  remote password 
+          case 'P':  remote password 
+          case 'E':  get password from IPMI_PASSWORD environment var 
+          case 'Y':  prompt for remote password 
+          case 'Z':  set local MC address 
+ * char *optarg  (input): command-line argument from getopt
+ * char fdebug   (input): show debug messages if =1, default=0
+ */
+void parse_lan_options(int c, char *optarg, char fdebug);
+/*
+ * set_lan_options
+ * Use this routine to set the lan options 'gnode','guser','gpswd', etc.
+ * This would only be required before opening a new session.
+ * char *node    (input): IP address or nodename of remote node's IPMI LAN
+ * char *user    (input): IPMI LAN username
+ * char *pswd    (input): IPMI LAN password
+ * int  auth     (input): IPMI LAN authentication type (1 - 5)
+ *			  IPMI_SESSION_AUTHTYPE_NONE      0x00
+ * 			  IPMI_SESSION_AUTHTYPE_MD2       0x01
+ * 			  IPMI_SESSION_AUTHTYPE_MD5       0x02
+ * 			  IPMI_SESSION_AUTHTYPE_PASSWORD  0x04
+ * 			  IPMI_SESSION_AUTHTYPE_OEM       0x05
+ * int  priv     (input): IPMI LAN privilege level (1 - 5)
+ * 			  IPMI_PRIV_LEVEL_CALLBACK 0x01
+ * 			  IPMI_PRIV_LEVEL_USER     0x02
+ * 			  IPMI_PRIV_LEVEL_OPERATOR 0x03
+ * 			  IPMI_PRIV_LEVEL_ADMIN    0x04
+ * 		          IPMI_PRIV_LEVEL_OEM      0x05
+ * int  cipher   (input): IPMI LAN cipher suite (0 thru 17, default is 3)
+ * 			  See table 22-19 in the IPMIv2 spec.
+ * void *addr    (input): Socket Address to use (SOCKADDR_T *) if not NULL
+ *                        This is only used in itsol.c because it has an
+ *                        existing socket open.  Default is NULL for this.
+ * int  addr_len (input): length of Address buffer (128 if ipv6, 16 if ipv4)
+ * returns 0 if successful, <0 if error
+ */
+int set_lan_options(char *node, char *user, char *pswd, int auth, int priv,
+                int cipher, void *addr, int addr_len);
+int get_lan_options(char *node, char *user, char *pswd, int *auth, int *priv,
+                int *cipher, void *addr, int *addr_len);
+void  print_lan_opt_usage(void);
+int   ipmi_getdeviceid(uchar *presp, int sresp, char fdebugcmd);
+/* int ipmi_open(void);  * embedded in ipmi_cmd() */
+int   ipmi_getpicmg(uchar *presp, int sresp, char fdebug);
+char *show_driver_type(int idx);
+int   set_driver_type(char *tag);  
+int   get_driver_type(void);
+int   nodeislocal(char *nodename);
+/* These *_mc routines are used to manage changing the mc. 
+ * The local mc (mymc) may be changed via -Z, and 
+ * the remote mc (mc) may be changed with -m. */
+void ipmi_set_mc(uchar bus, uchar sa, uchar lun, uchar type);
+void ipmi_get_mc(uchar *bus, uchar *sa, uchar *lun, uchar *type);
+void ipmi_restore_mc(void);
+void ipmi_set_mymc(uchar bus, uchar sa, uchar lun, uchar type);
+void ipmi_get_mymc(uchar *bus, uchar *sa, uchar *lun, uchar *type);
+/* ipmi_cmdraw_mc and ipmi_cmd_mc are used in cases where the mc may
+ * have been changed via ipmi_set_mc.  */
+int ipmi_cmdraw_mc(uchar cmd, uchar netfn, 
+		uchar *pdata, int sdata, uchar *presp,
+		int *sresp, uchar *pcc, char fdebugcmd);
+int ipmi_cmd_mc(ushort icmd, uchar *pdata, int sdata, uchar *presp,
+                int *sresp, uchar *pcc, char fdebugcmd);
+/* ipmi_sendrecv is a wrapper for ipmi_cmdraw which maps to ipmitool syntax */
+int ipmi_sendrecv(struct ipmi_rq * req, uchar *rsp, int *rsp_len);
+
+/* other common subroutines */
+char * decode_rv(int rv);  /*ipmicmd.c*/
+char * decode_cc(ushort icmd, int cc);
+void dump_buf(char *tag,uchar *pbuf,int sz, char fshowascii);
+int  get_lan_channel(uchar chstart, uchar *chan);
+void show_fru_picmg(uchar *pdata, int dlen); /* ifru_picmg.c*/
+/* show_outcome outputs the meaning of the return code. */
+void show_outcome(char *prog, int ret);
+/* these log routines are primarily for the isol debug log */
+FILE *open_log(char *mname);
+void close_log(void);
+void flush_log(void);
+void print_log( char *pattn, ... );
+void dump_log(FILE *fp,char *tag,uchar *pbuf,int sz, char fshowascii);
+void logmsg( char *pname, char *pattn, ... );
+
+#ifdef WIN32
+/* Implement the Linux strncasecmp for Windows. */
+int strncasecmp(const char *s1, const char *s2, int n);
+#endif
+const char *val2str(ushort val, const struct valstr *vs); /*ipmilanplus.c*/
+const char * oemval2str(ushort oem, uchar val, const struct oemvalstr *vs);
+void  set_debug(void);  /*used only by oem_sun.c*/
+void  set_iana(int iana);  /*ipmicmd.c*/
+void  set_mfgid(uchar *devid, int len);
+void  get_mfgid(int *pvend, int *pprod);
+void  get_devid_ver(uchar *bmaj, uchar *bmin, uchar *iver);
+
+char *get_nodename(void);
+char  is_remote(void);
+void  show_devid(uchar b1, uchar b2, uchar i1, uchar i2);
+int   set_max_kcs_loops(int ms);  /* ipmicmd.c, calls ipmidir.c if ok */
+
+/* These common subroutines are in subs.c */
+int    str_icmp(char *s1, char *s2); /*used internally in ipmicmd.c*/
+char * strdup_(const char *instr);  /*wrapper for strdup, supports WIN32*/
+int   strlen_(const char *s);
+uchar  htoi(char *inhex);
+void  os_usleep(int s, int u);  
+char *get_iana_str(int mfg);   /*subs.c*/
+int   get_errno(void);   /*subs.c*/
+const char * buf2str(uchar * buf, int len); /*subs.c*/
+int   str2uchar(char *str_in, uchar *uchr_out);
+uchar atob(char *str_in);    /* calls str2uchar*/
+void  atoip(uchar *array,char *instr);
+int   get_system_info(uchar parm, char *pbuf, int *szbuf); /*subs.c*/
+int   set_system_info(uchar parm, uchar *pbuf, int szbuf); /*subs.c*/
+int   ipmi_reserved_user(int vend, int userid);  /*subs.c*/
+	
+/* from mem_if.c */
+int get_BiosVersion(char *str);
+
+/* see isensor.h for SDR cache routines */
+/* see ievents.h for sensor_type_desc, sel_opts, decode_sel routines */
+
+#ifdef __cplusplus
+}
+#endif 
+/* end ipmicmd.h */