New upstream version 3.0.1upstream/3.0.1

1 files changed, 144 insertions, 25 deletions

diff --git a/util/isensor.c b/util/isensor.c
index a59e18b..9456613 100644
--- a/util/isensor.c
+++ b/util/isensor.c
@@ -164,10 +164,12 @@ extern int decode_sensor_supermicro(uchar *sdr,uchar *reading,char *pstring,
 				int slen);  /*see oem_supermicro.c*/
 extern int decode_sensor_quanta(uchar *sdr,uchar *reading,char *pstring,
 				int slen);  /*see oem_quanta.c*/
-extern int decode_sensor_hp(uchar *sdr,uchar *reading,char *pstring,
-				int slen);  /*see oem_hp.c*/
 extern int decode_sensor_dell(uchar *sdr,uchar *reading,char *pstring,
 				int slen);  /*see oem_dell.c*/
+extern int decode_sensor_lenovo(uchar *sdr,uchar *reading,char *pstring,
+				int slen);  /*see oem_lenovo.c*/
+extern int decode_sensor_hp(uchar *sdr,uchar *reading,char *pstring,
+				int slen);  /*see oem_hp.c*/
 extern void show_oemsdr_hp(uchar *sdr); 
 #else
 int is_romley(int vend, int prod) { 
@@ -252,7 +254,7 @@ char *decode_entity_id(int id) {
  *  Global Data
  ************************/
 static char *progname  = "isensor";
-static char *progver   = "3.00";
+static char *progver   = "3.01";
 #ifdef WIN32
 static char savefile[] = "%ipmiutildir%\\thresholds.cmd";
 #else
@@ -314,7 +316,7 @@ static int prod_id;
  * This is used to decode the sensor reading types and meanings.
  * Use IPMI Table 36-1 and 36-2 for this.
  */
-#define N_DSTATUS 82
+#define N_DSTATUS 101
 #define STR_CUSTOM     58
 #define STR_OEM        71
 #define STR_AC_LOST    76
@@ -351,10 +353,10 @@ static char *sensor_dstatus[N_DSTATUS] = {
 /*19 Avl */ "RedunLost",
 /*20 Avl */ "RedunDegr",
 /* ACPI Device Power States */
-/*21 ACPI*/ "Off    ",
-/*22 ACPI*/ "Working",
+/*21 ACPI*/ "Off    ", /*D3*/
+/*22 ACPI*/ "Working", /*D1*/
 /*23 ACPI*/ "Sleeping", /*D2/S2*/
-/*24 ACPI*/ "On",
+/*24 ACPI*/ "On",      /*D0*/
 /* Critical Interrupt event states */
 /*25 CrI */ "FP_NMI  ",
 /*26 CrI */ "Bus_TimOut",
@@ -424,7 +426,26 @@ static char *sensor_dstatus[N_DSTATUS] = {
 /*78 PS  */   "Config_Err",
 /*79 HSC */   "Offline",
 /*80 HSC */   "Rebuilding",
-/*81 other*/  " _ "
+/*81 other*/  " _ ",
+/*82 Avl */ "NonRedund_Sufficient",
+/*83 Avl */ "NonRedund_Insufficient",
+/*84 Usage */ "Idle",
+/*85 Usage */ "Active",
+/*86 Usage */ "Busy",
+/*87 Trans */ "Non-Critical",
+/*88 Trans */ "Critical",
+/*89 Trans */ "Non-Recoverable",
+/*90 Trans */ "Monitor",
+/*91 Trans */ "Informational",
+/*92 State */ "Running",
+/*93 State */ "In_Test",
+/*94 State */ "Power_Off",
+/*95 State */ "Online",
+/*96 State */ "Offline",
+/*97 State */ "Off_Duty",
+/*98 State */ "Degraded",
+/*99 State */ "PowerSave",
+/*100 State */ "InstallError"
 };
 
 static char *raid_states[9] = {  /*for sensor type 0x0d drive status */
@@ -1941,6 +1962,10 @@ int decode_oem_sensor(uchar *sdr,uchar *reading,char *pstring,int slen)
       case VENDOR_DELL: 
           rv = decode_sensor_dell(sdr, reading, pstring, slen);
           break;
+      case VENDOR_LENOVO: 
+      case VENDOR_LENOVO2: 
+          rv = decode_sensor_lenovo(sdr, reading, pstring, slen);
+          break;
       default:
 	  break;
    } /*end-switch vend_id*/
@@ -2109,6 +2134,97 @@ ShowThresh(int flg, uchar bits, uchar *vals, uchar *sdr)
    }  /*endif full sdr*/
 }
 
+int decode_comp_generic(uchar type, uchar evtype, uchar num, ushort reading)
+{
+	int istr = 0;
+    uchar b;
+	   /* decode via evtype */
+       switch(evtype)
+	   {
+	   case 0x02:	
+		  if (reading & 0x01) istr = 85; /* Active */
+		  if (reading & 0x02) istr = 86; /* Busy */
+		  else istr = 84;  /* Idle (OK)) */
+	   case 0x03:
+		  if (reading & 0x01) istr = 13; /* Asserted */
+		  else istr = 0;  /* "OK" Deasserted */
+	      break;
+	   case 0x04:
+		  if (reading & 0x01) istr = 15; /* Predictive Failure */
+		  else istr = 0;  /* "OK" Deasserted */
+	      break;
+	   case 0x05:
+		  if (reading & 0x01) istr = 65; /* Limit Exceeded*/
+		  else istr = 0;  /* "OK" LimitNotExceeded*/
+	      break;
+	   case 0x07:	/* transition */
+		  b = bitnum(reading);
+		  switch(b) {
+		  case 0: istr = 0; break; /*no bits set, OK*/
+		  case 1: istr = 87; break; /*transition up to Non-Critical*/
+		  case 2: istr = 88; break; /*transition up to Critical */
+		  case 3: istr = 89; break; /*transition up to Non-recoverable */
+		  case 4: istr = 87; break; /*transition down to Non-Critical */
+		  case 5: istr = 88; break; /*transition down to Critical */
+		  case 6: istr = 89; break; /*transition to Non-recoverable */
+		  case 7: istr = 90; break; /*Monitor*/
+		  case 8: istr = 91; break; /*Informational*/
+		  default: istr = 8; break; /*'OK*'*/
+		  }
+	      break;
+	   case 0x08:
+		  if (reading & 0x01) istr = 9; /* Present */
+		  else istr = 10;  /*Absent*/
+	      break;
+	   case 0x09:	/*  Availability event states */
+		  if (reading & 0x01) istr = 17; /* Enabled */
+		  else istr = 16;  /*Disabled*/
+	      break;
+	   case 0x0A:	/* */
+		  b = (reading & 0x7f);
+		  switch(b) {
+		  case 0x00: istr = 8;  break; /* 00 'OK*'*/
+		  case 0x01: istr = 92; break; /* transition to Running */
+		  case 0x02: istr = 93; break; /* transition to In Test */
+		  case 0x04: istr = 94; break; /* transition to Power Off */
+		  case 0x08: istr = 95; break; /* transition to On Line */
+		  case 0x10: istr = 96; break; /* transition to Off Line */
+		  case 0x20: istr = 97; break; /* transition to Off Duty */
+		  case 0x40: istr = 98; break; /* transition to Degraded */
+		  case 0x80: istr = 99; break; /* transition to Power Save */
+		  default: istr = 100; break; /* Install Error */
+		  }
+	      break;
+	   case 0x0B:	/* Redundancy */
+		  b = (reading & 0x7f);
+		  switch(b) {
+		  case 0x00: istr = 8;  break; /* 00 'OK*'*/
+		  case 0x01: istr = 18; break; /* 01 Fully Redundant */
+		  case 0x02: istr = 19; break; /* 02 Redundancy Lost */
+		  case 0x04: istr = 20; break; /* 04 Redundancy Degraded */
+		  case 0x08: istr = 82; break; /* 08 Non-Redundant/Sufficient down */
+		  case 0x10: istr = 82; break; /* 10 Non-Redundant/Sufficient up*/
+		  case 0x20: istr = 83; break; /* 20 Non-Redundant/Insufficient */
+		  case 0x40: istr = 20; break; /* 40 Redundancy Degraded down */
+		  default: istr = 20; break; /* Redundancy Degraded up */
+		  }
+	      break;
+	   case 0x0C:	/* ACPI Power States */
+		  if (reading & 0x04)      istr = 21; /* D3, Off */
+		  else if (reading & 0x02) istr = 23; /* D2, Sleeping */
+		  else if (reading & 0x01) istr = 22; /* D1, Working */
+		  else istr = 24;  /*D0, On*/
+	      break;
+	   default:
+	      if (fdebug) 
+		    printf("sensor[%x] et %02x type %02x not decoded, reading = %04x\n",
+				   num,evtype,type,reading);
+	      istr = STR_OTHER;  /* other " - " */
+	      break;
+	   }
+	return(istr);
+}
+
 /* 
  * decode_comp_reading
  * 
@@ -2147,10 +2263,10 @@ decode_comp_reading(uchar type, uchar evtype, uchar num,
 	   } else if (evtype == 0x05) {
 		   /* see CPU1 VRD Temp on S5000, snum 0xc0 thru 0xcf */
 		   if (reading & 0x01) istr = 65; /* Limit Exceeded*/
-                   else istr = 0;  /* "OK" LimitNotExceeded*/
+		   else istr = 0;  /* "OK" LimitNotExceeded*/
 	   } else if (evtype == 0x03) {
 		   if (reading & 0x01) istr = 13; /* Asserted */
-                   else istr = 0;  /* "OK" Deasserted */
+		   else istr = 0;  /* "OK" Deasserted */
 	   } else {   /* evtype == other 0x05 */
 		   if (reading & 0x01) istr = 0; /* 8="OK*", 0="OK" */
 		   else istr = 5; /*state asserted, Crit-hi */
@@ -2351,8 +2467,8 @@ decode_comp_reading(uchar type, uchar evtype, uchar num,
 	     case 7: 
 	     case 8: 
 	     case 11: 
-	     case 13: istr = 21;  break; /*Off*/
 	     case 12: istr = 24;  break; /*On*/
+	     case 13: istr = 21;  break; /*Off*/
 	     default: istr = 41;   /*unknown*/
            }
 	   break;
@@ -2378,8 +2494,12 @@ decode_comp_reading(uchar type, uchar evtype, uchar num,
 	   else istr = 42;  /* NotAvailable */
 	   break;
 	case 0x28:	/* BMC FW Health */
-	   if (reading == 0) istr = 0;  /*OK*/
-	   else istr = 12; /*Faulty*/
+	   if (evtype == 0x6F) {  /*Sensor-specific*/
+	     if (reading == 0) istr = 0;  /*OK*/
+	     else istr = 12; /*Faulty*/
+	   } else {  /*use event/reading type*/
+	     istr = decode_comp_generic(type, evtype, num, reading);
+	   }
 	   break;
 	case 0x29:	/* Battery */
            switch(reading & 0x7f) {
@@ -2395,8 +2515,8 @@ decode_comp_reading(uchar type, uchar evtype, uchar num,
 	   else istr = 46;                 /*Deactivated*/
 	   break;
 	case 0x2B:	/* Version Change */
-           b = bitnum(reading1); 
-           switch(b) {
+	   b = bitnum(reading1); 
+	   switch(b) {
 	     case 0: istr = 0;   break; /*OK, no bits set*/
 	     case 1: istr = 72;  break; /*HW Changed, bit 0 set*/
 	     case 2: istr = 73;  break; /*SW Changed,  bit 1 set*/
@@ -2404,9 +2524,7 @@ decode_comp_reading(uchar type, uchar evtype, uchar num,
 	     default: istr = 75; break; /*Change error*/
 	   }
 	   break;
-	case 0x60:	/* SCSI 1 Term Flt */
-	case 0x61:	/* SCSI 2 Term Flt */
-	   break;
+
         /* sensor types 0xC0 - 0xFF are OEM RESERVED */
 	case 0xF1:	/* ATCA IPMB-0 Sensor */
 	   if ((reading & 0x7fff) == 0x0008) istr = 0; /*OK*/
@@ -2418,13 +2536,14 @@ decode_comp_reading(uchar type, uchar evtype, uchar num,
 	case 0xF2:	/* ATCA Module HotSwap, TODO: refine this */
 	case 0xF3:	/* SMI Timeout, etc. */
 	   if (reading & 0x01) istr = 13; /* Asserted */
-           else istr = 0;  /* "OK", Deasserted */
+	   else istr = 0;  /* "OK", Deasserted */
 	   break;
+
+	case 0x60:	/* SCSI 1 Term Flt */
+	case 0x61:	/* SCSI 2 Term Flt */
    	default:
-	   if (fdebug) 
-		printf("sensor[%x] type %02x not decoded, reading = %04x\n",
-				num,type,reading);
-	   istr = STR_OTHER;  /* other " - " */
+	   istr = decode_comp_generic(type, evtype, num, reading);
+	   break;
    }
    return(istr);
 }  /* end decode_comp_reading */
@@ -2553,7 +2672,7 @@ ShowSDR(char *tag, uchar *sdr)
 			sens[0], sensor_dstatus[i],val,typestr);
         }
 	sep[0] = 0; /*null string*/
-        printf("%s", tag);
+    printf("%s", tag);
 	if (fsimple) {
            sprintf(sep,"%c ",bdelim);
 	   printf("%04x %c Full    %c %s %c %02x %c %s %c %s%c",
@@ -3350,7 +3469,7 @@ int i_sensor(int argc, char **argv)
 		fmBMC = 0;
 		if (is_romley(vend_id,prod_id)) fRomley = 1;
 		if (is_grantley(vend_id,prod_id)) fGrantley = 1;
-		if (prod_id == 0x003E || fRomley)   /*Urbanna NSN2U,CG2100*/
+		if (prod_id == 0x003E || fRomley || fGrantley)  /*Urbanna,CG2100*/
 		   set_max_kcs_loops(URNLOOPS); /*longer KCS timeout*/
     } else if ((vend_id == VENDOR_SUPERMICRO)
                 || (vend_id == VENDOR_SUPERMICROX)) {