From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/ialarms.8 | 103 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 doc/ialarms.8 (limited to 'doc/ialarms.8') diff --git a/doc/ialarms.8 b/doc/ialarms.8 new file mode 100644 index 0000000..34de55a --- /dev/null +++ b/doc/ialarms.8 @@ -0,0 +1,103 @@ +.TH IALARMS 8 "Version 1.3: 20 Apr 2007" +.SH NAME +ipmiutil_alarms \- display and set alarm indicators +.SH SYNOPSIS +.B "ipmiutil alarms [-abcdimnoprx -N node -U user -P/-R pswd -EFJTVY]" + +.SH DESCRIPTION +.I ipmiutil alarms +is a program that uses IPMI commands to +display and set alarm indicators, which are usually LEDs on the system +chassis front panel. +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N. +Note that a LAN user must have Administrative privileges to read or write +the alarm LEDs. + +Note that this utility may not be the only logic setting alarm states. +The BMC firmware, system management software, or cluster fault manager +may also want to set alarm states. Intel provides a Telco Alarms Manager API +which presents a consolidated interface for all alarm management applications. + +.SH OPTIONS +Command line options are described below. +.IP "-r" +Read-only. Show the alarms status, but do not set any states. +This is also the default mode if no parameters are specified. +.IP "-iN" +Sets the Chassis Identify feature, which can be an LED or some other +alarm. If N=0, turn off the Chassis ID, otherwise turn the ID on +for N seconds. N=255 will turn on the ID indefinitely, if it is IPMI 2.0. +.IP "-aN" +Sets Disk A Fault LED. If N=0, turn it off. If N=1, turn it on. Used only for TIGPT1U platform. +.IP "-bN" +Sets Disk B Fault LED. If N=0, turn it off. If N=1, turn it on. Used only for TIGPT1U platform. +.IP "-dXN" +Sets Disk X Fault LED, where X=0-6. If N=0, turn it off. If N=1, turn it on. Used only for NSC2U platform. +.IP "-cN" +Sets the Critical Alarm. If N=0, turn it off. If N=1, turn it on. +.IP "-mN" +Sets the Major Alarm. If N=0, turn it off. If N=1, turn it on. +.IP "-nN" +Sets the Minor Alarm. If N=0, turn it off. If N=1, turn it on. +.IP "-pN" +Sets the Power Alarm. If N=0, turn it off. If N=1, turn it on. +Note that the Power LED is also wired to the System Fault LED +in the back of the system, so this state may be off for Power, +but the LED could be lit for a System Fault reason instead. +Refer to the system Technical Product Specification for System Faults. +.IP "-o" +Sets all alarms off, including the Chassis ID. +.IP "-x" +Causes extra debug messages to be displayed. + +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use this IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use this IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + + +.SH "SEE ALSO" +ipmiutil(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3