From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/ipmiutil.8 | 116 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 doc/ipmiutil.8 (limited to 'doc/ipmiutil.8') diff --git a/doc/ipmiutil.8 b/doc/ipmiutil.8 new file mode 100644 index 0000000..24d0a3a --- /dev/null +++ b/doc/ipmiutil.8 @@ -0,0 +1,116 @@ +.TH IPMIUTIL 8 "Version 1.1: 10 May 2012" +.SH NAME +ipmiutil \- a meta-command to invoke various IPMI functions. + +.SH SYNOPSIS +.B "ipmiutil [-x -NUPREFJTVY] [other command options] + +.SH DESCRIPTION +This utility performs various IPMI functions. Each of the individual +commands in the ipmiutil project can be invoked via this meta-command. +The is one of the following: + alarms show/set the front panel alarm LEDs and relays + leds show/set the front panel alarm LEDs and relays + cmd send a specified raw IPMI command to the BMC + config list/save/restore BMC configuration parameters + dcmi get/set DCMI parameters + discover discover all IPMI servers on this LAN + ekanalyzer run FRU-EKeying analyzer on FRU files (deprecated, see fru) + events decode IPMI events and display them + firewall show/set firmware firewall functions + fru show decoded FRU inventory data, write asset tag + fwum OEM firmware update manager extensions + getevt get IPMI events and display them, event daemon + getevent get IPMI events and display them, event daemon + health check and show the basic health of the IPMI BMC + hpm HPM firmware update manager extensions + lan show/set IPMI LAN parameters and PEF table + picmg show/set picmg extended functions + reset cause the BMC to reset or power down the system + sel show/clear firmware System Event Log records + sensor show Sensor Data Records, readings, thresholds + serial show/set IPMI Serial & Terminal Mode parameters + sol start/stop an SOL console session + smcoem SuperMicro OEM functions + sunoem Sun OEM functions + delloem Dell OEM functions + tsol Tyan SOL console start/stop session + wdt show/set/reset the watchdog timer +.br +For help on each command (e.g. 'sel'), enter: + ipmiutil sel -? +.br +For man pages on each command, its man page is named "i", +or refer to SEE ALSO below. + +.br +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N is used. + +.SH OPTIONS +Command options are described in the man page for each command. +Below are a few of the common options. +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + +.SH "EXAMPLES" +ipmiutil sel +.br +Shows the IPMI System Event Log entries. +.PP +ipmiutil wdt +.br +Shows the watchdog timer values. +.PP + +.SH "SEE ALSO" +ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifirewall(8) +ifru(8) ifruset(8) ifwum(8) igetevent(8) ihealth(8) ihpm(8) +ilan(8) ipicmg(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) isunoem(8) +iwdt(8) ipmiutil(8) ipmi_port(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3