1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
|
.TH IPMIUTIL 8 "Version 1.1: 10 May 2012"
.SH NAME
ipmiutil \- a meta-command to invoke various IPMI functions.
.SH SYNOPSIS
.B "ipmiutil <command> [-x -NUPREFJTVY] [other command options]
.SH DESCRIPTION
This utility performs various IPMI functions. Each of the individual
commands in the ipmiutil project can be invoked via this meta-command.
The <command> is one of the following:
alarms show/set the front panel alarm LEDs and relays
leds show/set the front panel alarm LEDs and relays
cmd send a specified raw IPMI command to the BMC
config list/save/restore BMC configuration parameters
dcmi get/set DCMI parameters
discover discover all IPMI servers on this LAN
ekanalyzer run FRU-EKeying analyzer on FRU files (deprecated, see fru)
events decode IPMI events and display them
firewall show/set firmware firewall functions
fru show decoded FRU inventory data, write asset tag
fwum OEM firmware update manager extensions
getevt get IPMI events and display them, event daemon
getevent get IPMI events and display them, event daemon
health check and show the basic health of the IPMI BMC
hpm HPM firmware update manager extensions
lan show/set IPMI LAN parameters and PEF table
picmg show/set picmg extended functions
reset cause the BMC to reset or power down the system
sel show/clear firmware System Event Log records
sensor show Sensor Data Records, readings, thresholds
serial show/set IPMI Serial & Terminal Mode parameters
sol start/stop an SOL console session
smcoem SuperMicro OEM functions
sunoem Sun OEM functions
delloem Dell OEM functions
tsol Tyan SOL console start/stop session
wdt show/set/reset the watchdog timer
.br
For help on each command (e.g. 'sel'), enter:
ipmiutil sel -?
.br
For man pages on each command, its man page is named "i<command>",
or refer to SEE ALSO below.
.br
This utility can use either the /dev/ipmi0 driver from OpenIPMI,
the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux,
direct user-space IOs, or the IPMI LAN interface if \-N is used.
.SH OPTIONS
Command options are described in the man page for each command.
Below are a few of the common options.
.IP "-x"
Causes extra debug messages to be displayed.
.IP "-N nodename"
Nodename or IP address of the remote target system. If a nodename is
specified, IPMI LAN interface is used. Otherwise the local system
management interface is used.
.IP "-U rmt_user"
Remote username for the nodename given. The default is a null username.
.IP "-P/-R rmt_pswd"
Remote password for the nodename given. The default is a null password.
.IP "-E"
Use the remote password from Environment variable IPMI_PASSWORD.
.IP "-F drv_t"
Force the driver type to one of the followng:
imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
Note that lan2i means lan2 with intelplus.
The default is to detect any available driver type and use it.
.IP "-J"
Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
Default is 3.
.IP "-T"
Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
.IP "-V"
Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
.IP "-Y"
Yes, do prompt the user for the IPMI LAN remote password.
Alternatives for the password are \-E or \-P.
.SH "EXAMPLES"
ipmiutil sel
.br
Shows the IPMI System Event Log entries.
.PP
ipmiutil wdt
.br
Shows the watchdog timer values.
.PP
.SH "SEE ALSO"
ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifirewall(8)
ifru(8) ifruset(8) ifwum(8) igetevent(8) ihealth(8) ihpm(8)
ilan(8) ipicmg(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) isunoem(8)
iwdt(8) ipmiutil(8) ipmi_port(8)
.SH WARNINGS
See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
.SH COPYRIGHT
Copyright (C) 2009 Kontron America, Inc.
.PP
See the file COPYING in the distribution for more details
regarding redistribution.
.PP
This utility is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY.
.SH AUTHOR
.PP
Andy Cress <arcress at users.sourceforge.net>
.br
|
