diff options
Diffstat (limited to 'missing')
| -rwxr-xr-x | missing | 460 |
1 files changed, 154 insertions, 306 deletions
@@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2006-05-10.23 +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,9 +17,7 @@ scriptversion=2006-05-10.23 # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -28,66 +25,40 @@ scriptversion=2006-05-10.23 # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake@gnu.org>." exit $? @@ -99,269 +70,146 @@ Send bug reports to <bug-automake@gnu.org>." ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case $1 in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $1 in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: |