New upstream version 0.9.8upstream/0.9.8

1 files changed, 3456 insertions, 1964 deletions

diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh
index 63ae69d..0f0a2da 100644
--- a/build-aux/ltmain.sh
+++ b/build-aux/ltmain.sh
@@ -1,9 +1,12 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
 
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -23,881 +26,2112 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
 	fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
 
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
 
 
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
 
 : ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
 
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
 
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
 
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
 
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
 
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
 
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
 
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
 
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
 
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
 
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
 
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
 
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
 
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
 
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
 
-# Make sure we have an absolute path for reexecution:
+# Make sure we have an absolute progpath for reexecution:
 case $progpath in
   [\\/]*|[A-Za-z]:\\*) ;;
   *[\\/]*)
-     progdir=$func_dirname_result
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
      progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
+     progpath=$progdir/$progname
      ;;
   *)
-     save_IFS="$IFS"
+     _G_IFS=$IFS
      IFS=${PATH_SEPARATOR-:}
      for progdir in $PATH; do
-       IFS="$save_IFS"
+       IFS=$_G_IFS
        test -x "$progdir/$progname" && break
      done
-     IFS="$save_IFS"
+     IFS=$_G_IFS
      test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
+     progpath=$progdir/$progname
      ;;
 esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
 
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
 
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
 opt_dry_run=false
-opt_help=false
 opt_quiet=false
 opt_verbose=false
-opt_warning=:
 
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset=''
+        tc_bold='';   tc_standout=''
+        tc_red='';   tc_green=''
+        tc_blue='';  tc_cyan=''
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
 }
 
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
 {
-    $opt_verbose && func_echo ${1+"$@"}
+    $debug_cmd
 
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
 }
 
-# func_echo_all arg...
+
+# func_echo_all ARG...
+# --------------------
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
     $ECHO "$*"
 }
 
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
 }
 
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
 {
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+    $debug_cmd
 
-    # bash bug again:
-    :
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
 }
 
-# func_fatal_error arg...
+
+# func_fatal_error ARG...
+# -----------------------
 # Echo program name prefixed message to standard error, and exit.
 func_fatal_error ()
 {
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
+    $debug_cmd
 
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
+    func_error "$*"
+    exit $EXIT_FAILURE
 }
-help="Try \`$progname --help' for more information."  ## default
 
 
-# func_grep expression filename
+# func_grep EXPRESSION FILENAME
+# -----------------------------
 # Check whether EXPRESSION matches any line of FILENAME, without output.
 func_grep ()
 {
+    $debug_cmd
+
     $GREP "$1" "$2" >/dev/null 2>&1
 }
 
 
-# func_mkdir_p directory-path
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
 # Make sure the entire path to DIRECTORY-PATH is available.
 func_mkdir_p ()
 {
-    my_directory_path="$1"
-    my_dir_list=
+    $debug_cmd
 
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+    _G_directory_path=$1
+    _G_dir_list=
 
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
       esac
 
       # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
+      while test ! -d "$_G_directory_path"; do
         # ...make a list in topmost first order.  Use a colon delimited
 	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
+        _G_dir_list=$_G_directory_path:$_G_dir_list
 
         # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
+        case $_G_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
       done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
 
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
         # try to create one of the directories concurrently.  Don't
         # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
+        $MKDIR "$_G_dir" 2>/dev/null || :
       done
-      IFS="$save_mkdir_p_IFS"
+      IFS=$func_mkdir_p_IFS
 
       # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
     fi
 }
 
 
-# func_mktempdir [string]
+# func_mktempdir [BASENAME]
+# -------------------------
 # Make a temporary directory that won't clash with other running
 # libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
+# given, BASENAME is the basename for that directory.
 func_mktempdir ()
 {
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
+    $debug_cmd
+
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
 
-    if test "$opt_dry_run" = ":"; then
+    if test : = "$opt_dry_run"; then
       # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
+      _G_tmpdir=$_G_template-$$
     else
 
       # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
 
-      if test ! -d "$my_tmpdir"; then
+      if test ! -d "$_G_tmpdir"; then
         # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
 
-        save_mktempdir_umask=`umask`
+        func_mktempdir_umask=`umask`
         umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
       fi
 
       # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
     fi
 
-    $ECHO "$my_tmpdir"
+    $ECHO "$_G_tmpdir"
 }
 
 
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
 {
-    case $1 in
-      *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
+    $debug_cmd
 
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
         ;;
       *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
     esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
 }
 
 
-# func_quote_for_expand arg
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
+func_quote_for_eval ()
+{
+    $debug_cmd
+
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *[\\\`\"\$]*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()
 {
+    $debug_cmd
+
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
-        my_arg="$1" ;;
+        _G_arg=$1 ;;
     esac
 
-    case $my_arg in
+    case $_G_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        my_arg="\"$my_arg\""
+        _G_arg=\"$_G_arg\"
         ;;
     esac
 
-    func_quote_for_expand_result="$my_arg"
+    func_quote_for_expand_result=$_G_arg
 }
 
 
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()
 {
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
+    $debug_cmd
 
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
 
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
       fi
-    fi
+    }
 }
 
 
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.  Use the saved locale for evaluation.
 func_show_eval_locale ()
 {
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
 
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
       fi
-    fi
+    }
 }
 
+
 # func_tr_sh
+# ----------
 # Turn $1 into a string suitable for a shell variable name.
 # Result is stored in $func_tr_sh_result.  All characters
 # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
 # if $1 begins with a digit, a '_' is prepended as well.
 func_tr_sh ()
 {
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
 }
 
 
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
+    $opt_verbose && func_echo "$*"
+
+    :
 }
 
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    echo
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
 }
 
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
 func_help ()
 {
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-	:print
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
-	p
-	d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
 }
 
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {
-    $opt_debug
+    $debug_cmd
 
-    func_error "missing argument for $1."
+    func_error "Missing argument for '$1'."
     exit_cmd=exit
 }
 
 
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
 # Set func_split_short_opt_name and func_split_short_opt_arg shell
 # variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
 {
-    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+    $debug_cmd
 
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
 
 
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
 {
-    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-    my_sed_long_arg='1s/^--[^=]*=//'
+    $debug_cmd
 
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
 
-exit_cmd=:
 
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $debug_cmd
 
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
 
+    exit $?
+}
 
 
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
 
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
 
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
 
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
 {
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+    $debug_cmd
 
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
 
 
-# func_arith arithmetic-term...
-func_arith ()
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
 {
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+    $debug_cmd
 
+    $warning_func ${1+"$@"}
+}
 
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
 
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
 
-# func_lo2o object
-func_lo2o ()
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
 {
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
 
 
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
 
 
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
+    func__fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
 }
 
 
 # func_config
+# -----------
 # Display the configuration for all the tags in this script.
 func_config ()
 {
@@ -915,17 +2149,19 @@ func_config ()
     exit $?
 }
 
+
 # func_features
+# -------------
 # Display the features supported by this script.
 func_features ()
 {
     echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
+    if test yes = "$build_libtool_libs"; then
       echo "enable shared libraries"
     else
       echo "disable shared libraries"
     fi
-    if test "$build_old_libs" = yes; then
+    if test yes = "$build_old_libs"; then
       echo "enable static libraries"
     else
       echo "disable static libraries"
@@ -934,289 +2170,297 @@ func_features ()
     exit $?
 }
 
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
-  # Global variable:
-  tagname="$1"
+    # Global variable:
+    tagname=$1
 
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
 
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
 
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
     *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
-
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
+
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
 }
 
+
 # func_check_version_match
+# ------------------------
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
 func_check_version_match ()
 {
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from an older release.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-      else
-        cat >&2 <<_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 $progname: of $PACKAGE $VERSION and run autoconf again.
 _LT_EOF
-    fi
+      fi
 
-    exit $EXIT_MISMATCH
-  fi
+      exit $EXIT_MISMATCH
+    fi
 }
 
 
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
 
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
 
+    nonopt=
+    preserve_args=
 
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    esac
+
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
 
 
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
 {
-  # this just eases exit handling
-  while test $# -gt 0; do
-    opt="$1"
-    shift
-    case $opt in
-      --debug|-x)	opt_debug='set -x'
-			func_echo "enabling shell trace mode"
-			$opt_debug
-			;;
-      --dry-run|--dryrun|-n)
-			opt_dry_run=:
-			;;
-      --config)
-			opt_config=:
-func_config
-			;;
-      --dlopen|-dlopen)
-			optarg="$1"
-			opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
-			shift
-			;;
-      --preserve-dup-deps)
-			opt_preserve_dup_deps=:
-			;;
-      --features)
-			opt_features=:
-func_features
-			;;
-      --finish)
-			opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-			;;
-      --help)
-			opt_help=:
-			;;
-      --help-all)
-			opt_help_all=:
-opt_help=': help-all'
-			;;
-      --mode)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
-			shift
-			;;
-      --no-silent|--no-quiet)
-			opt_silent=false
-func_append preserve_args " $opt"
-			;;
-      --no-warning|--no-warn)
-			opt_warning=false
-func_append preserve_args " $opt"
-			;;
-      --no-verbose)
-			opt_verbose=false
-func_append preserve_args " $opt"
-			;;
-      --silent|--quiet)
-			opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
-			;;
-      --verbose|-v)
-			opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
-			;;
-      --tag)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
-			shift
-			;;
-
-      -\?|-h)		func_usage				;;
-      --help)		func_help				;;
-      --version)	func_version				;;
-
-      # Separate optargs to long options:
-      --*=*)
-			func_split_long_opt "$opt"
-			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-			func_split_short_opt "$opt"
-			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      --)		break					;;
-      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
-      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
-    esac
-  done
+    $debug_cmd
 
-  # Validate options:
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
 
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
 
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
 
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-      ;;
-  esac
 
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
 
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
     fi
 
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
 
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
 
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
 
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
 
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
 }
+func_add_hook func_validate_options libtool_validate_options
+
 
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
 
 
 
@@ -1224,24 +2468,52 @@ func_enable_tag "$optarg"
 ##    Main.    ##
 ## ----------- ##
 
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
 # func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_lalib_p ()
 {
     test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
 }
 
 # func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
 # This function implements the same check as func_lalib_p without
 # resorting to external programs.  To this end, it redirects stdin and
 # closes it afterwards, without saving the original file descriptor.
 # As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
+# fatal anyway.  Works if 'file' does not exist.
 func_lalib_unsafe_p ()
 {
     lalib_p=no
@@ -1249,13 +2521,13 @@ func_lalib_unsafe_p ()
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
-	    case "$lalib_p_line" in
+	    case $lalib_p_line in
 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 	    esac
 	done
 	exec 0<&5 5<&-
     fi
-    test "$lalib_p" = yes
+    test yes = "$lalib_p"
 }
 
 # func_ltwrapper_script_p file
@@ -1264,7 +2536,8 @@ func_lalib_unsafe_p ()
 # determined imposters.
 func_ltwrapper_script_p ()
 {
-    func_lalib_p "$1"
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
 }
 
 # func_ltwrapper_executable_p file
@@ -1289,7 +2562,7 @@ func_ltwrapper_scriptname ()
 {
     func_dirname_and_basename "$1" "" "."
     func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
 }
 
 # func_ltwrapper_p file
@@ -1308,11 +2581,13 @@ func_ltwrapper_p ()
 # FAIL_CMD may read-access the current command in variable CMD!
 func_execute_cmds ()
 {
-    $opt_debug
+    $debug_cmd
+
     save_ifs=$IFS; IFS='~'
     for cmd in $1; do
-      IFS=$save_ifs
+      IFS=$sp$nl
       eval cmd=\"$cmd\"
+      IFS=$save_ifs
       func_show_eval "$cmd" "${2-:}"
     done
     IFS=$save_ifs
@@ -1324,10 +2599,11 @@ func_execute_cmds ()
 # Note that it is not necessary on cygwin/mingw to append a dot to
 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
 func_source ()
 {
-    $opt_debug
+    $debug_cmd
+
     case $1 in
     */* | *\\*)	. "$1" ;;
     *)		. "./$1" ;;
@@ -1354,10 +2630,10 @@ func_resolve_sysroot ()
 # store the result into func_replace_sysroot_result.
 func_replace_sysroot ()
 {
-  case "$lt_sysroot:$1" in
+  case $lt_sysroot:$1 in
   ?*:"$lt_sysroot"*)
     func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
+    func_replace_sysroot_result='='$func_stripname_result
     ;;
   *)
     # Including no sysroot.
@@ -1374,7 +2650,8 @@ func_replace_sysroot ()
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
-    $opt_debug
+    $debug_cmd
+
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
@@ -1393,7 +2670,7 @@ func_infer_tag ()
 	for z in $available_tags; do
 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
@@ -1418,7 +2695,7 @@ func_infer_tag ()
 	# line option must be used.
 	if test -z "$tagname"; then
 	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
+	  func_fatal_error "specify a tag with '--tag'"
 #	else
 #	  func_verbose "using $tagname tagged configuration"
 	fi
@@ -1434,15 +2711,15 @@ func_infer_tag ()
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
     else
       write_lobj=none
     fi
 
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
     else
       write_oldobj=none
     fi
@@ -1450,7 +2727,7 @@ func_write_libtool_object ()
     $opt_dry_run || {
       cat >${write_libobj}T <<EOF
 # $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -1462,7 +2739,7 @@ pic_object=$write_lobj
 non_pic_object=$write_oldobj
 
 EOF
-      $MV "${write_libobj}T" "${write_libobj}"
+      $MV "${write_libobj}T" "$write_libobj"
     }
 }
 
@@ -1482,8 +2759,9 @@ EOF
 # be empty on error (or when ARG is empty)
 func_convert_core_file_wine_to_w32 ()
 {
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
   if test -n "$1"; then
     # Unfortunately, winepath does not exit with a non-zero error code, so we
     # are forced to check the contents of stdout. On the other hand, if the
@@ -1491,9 +2769,9 @@ func_convert_core_file_wine_to_w32 ()
     # *an error message* to stdout. So we must check for both error code of
     # zero AND non-empty stdout, which explains the odd construction:
     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
+        $SED -e "$sed_naive_backslashify"`
     else
       func_convert_core_file_wine_to_w32_result=
     fi
@@ -1514,18 +2792,19 @@ func_convert_core_file_wine_to_w32 ()
 # are convertible, then the result may be empty.
 func_convert_core_path_wine_to_w32 ()
 {
-  $opt_debug
+  $debug_cmd
+
   # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
+  func_convert_core_path_wine_to_w32_result=
   if test -n "$1"; then
     oldIFS=$IFS
     IFS=:
     for func_convert_core_path_wine_to_w32_f in $1; do
       IFS=$oldIFS
       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
         if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
         else
           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
         fi
@@ -1554,7 +2833,8 @@ func_convert_core_path_wine_to_w32 ()
 # environment variable; do not put it in $PATH.
 func_cygpath ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
     if test "$?" -ne 0; then
@@ -1563,7 +2843,7 @@ func_cygpath ()
     fi
   else
     func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
   fi
 }
 #end: func_cygpath
@@ -1574,10 +2854,11 @@ func_cygpath ()
 # result in func_convert_core_msys_to_w32_result.
 func_convert_core_msys_to_w32 ()
 {
-  $opt_debug
+  $debug_cmd
+
   # awkward: cmd appends spaces to result
   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
 }
 #end: func_convert_core_msys_to_w32
 
@@ -1588,13 +2869,14 @@ func_convert_core_msys_to_w32 ()
 # func_to_host_file_result to ARG1).
 func_convert_file_check ()
 {
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
     func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
+    func_error "  '$1'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback:
-    func_to_host_file_result="$1"
+    func_to_host_file_result=$1
   fi
 }
 # end func_convert_file_check
@@ -1606,10 +2888,11 @@ func_convert_file_check ()
 # func_to_host_file_result to a simplistic fallback value (see below).
 func_convert_path_check ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -z "$4" && test -n "$3"; then
     func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
+    func_error "  '$3'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback.  This is a deliberately simplistic "conversion" and
     # should not be "improved".  See libtool.info.
@@ -1618,7 +2901,7 @@ func_convert_path_check ()
       func_to_host_path_result=`echo "$3" |
         $SED -e "$lt_replace_pathsep_chars"`
     else
-      func_to_host_path_result="$3"
+      func_to_host_path_result=$3
     fi
   fi
 }
@@ -1630,9 +2913,10 @@ func_convert_path_check ()
 # and appending REPL if ORIG matches BACKPAT.
 func_convert_path_front_back_pathsep ()
 {
-  $opt_debug
+  $debug_cmd
+
   case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
     ;;
   esac
   case $4 in
@@ -1646,7 +2930,7 @@ func_convert_path_front_back_pathsep ()
 ##################################################
 # $build to $host FILE NAME CONVERSION FUNCTIONS #
 ##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # Result will be available in $func_to_host_file_result.
@@ -1657,7 +2941,8 @@ func_convert_path_front_back_pathsep ()
 # in func_to_host_file_result.
 func_to_host_file ()
 {
-  $opt_debug
+  $debug_cmd
+
   $to_host_file_cmd "$1"
 }
 # end func_to_host_file
@@ -1669,7 +2954,8 @@ func_to_host_file ()
 # in (the comma separated) LAZY, no conversion takes place.
 func_to_tool_file ()
 {
-  $opt_debug
+  $debug_cmd
+
   case ,$2, in
     *,"$to_tool_file_cmd",*)
       func_to_tool_file_result=$1
@@ -1687,7 +2973,7 @@ func_to_tool_file ()
 # Copy ARG to func_to_host_file_result.
 func_convert_file_noop ()
 {
-  func_to_host_file_result="$1"
+  func_to_host_file_result=$1
 }
 # end func_convert_file_noop
 
@@ -1698,11 +2984,12 @@ func_convert_file_noop ()
 # func_to_host_file_result.
 func_convert_file_msys_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1714,8 +3001,9 @@ func_convert_file_msys_to_w32 ()
 # func_to_host_file_result.
 func_convert_file_cygwin_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
     # LT_CYGPATH in this case.
@@ -1731,11 +3019,12 @@ func_convert_file_cygwin_to_w32 ()
 # and a working winepath. Returns result in func_to_host_file_result.
 func_convert_file_nix_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1747,12 +3036,13 @@ func_convert_file_nix_to_w32 ()
 # Returns result in func_to_host_file_result.
 func_convert_file_msys_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
+    func_to_host_file_result=$func_cygpath_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1765,13 +3055,14 @@ func_convert_file_msys_to_cygwin ()
 # in func_to_host_file_result.
 func_convert_file_nix_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
     func_convert_core_file_wine_to_w32 "$1"
     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
+    func_to_host_file_result=$func_cygpath_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1781,7 +3072,7 @@ func_convert_file_nix_to_cygwin ()
 #############################################
 # $build to $host PATH CONVERSION FUNCTIONS #
 #############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # The result will be available in $func_to_host_path_result.
@@ -1805,10 +3096,11 @@ func_convert_file_nix_to_cygwin ()
 to_host_path_cmd=
 func_init_to_host_path_cmd ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -z "$to_host_path_cmd"; then
     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
   fi
 }
 
@@ -1818,7 +3110,8 @@ func_init_to_host_path_cmd ()
 # in func_to_host_path_result.
 func_to_host_path ()
 {
-  $opt_debug
+  $debug_cmd
+
   func_init_to_host_path_cmd
   $to_host_path_cmd "$1"
 }
@@ -1829,7 +3122,7 @@ func_to_host_path ()
 # Copy ARG to func_to_host_path_result.
 func_convert_path_noop ()
 {
-  func_to_host_path_result="$1"
+  func_to_host_path_result=$1
 }
 # end func_convert_path_noop
 
@@ -1840,8 +3133,9 @@ func_convert_path_noop ()
 # func_to_host_path_result.
 func_convert_path_msys_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from ARG.  MSYS
     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -1849,7 +3143,7 @@ func_convert_path_msys_to_w32 ()
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1863,8 +3157,9 @@ func_convert_path_msys_to_w32 ()
 # func_to_host_file_result.
 func_convert_path_cygwin_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
@@ -1883,14 +3178,15 @@ func_convert_path_cygwin_to_w32 ()
 # a working winepath.  Returns result in func_to_host_file_result.
 func_convert_path_nix_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1904,15 +3200,16 @@ func_convert_path_nix_to_w32 ()
 # Returns result in func_to_host_file_result.
 func_convert_path_msys_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
+    func_to_host_path_result=$func_cygpath_result
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1927,8 +3224,9 @@ func_convert_path_msys_to_cygwin ()
 # func_to_host_file_result.
 func_convert_path_nix_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from
     # ARG. msys behavior is inconsistent here, cygpath turns them
@@ -1937,7 +3235,7 @@ func_convert_path_nix_to_cygwin ()
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
+    func_to_host_path_result=$func_cygpath_result
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1946,13 +3244,31 @@ func_convert_path_nix_to_cygwin ()
 # end func_convert_path_nix_to_cygwin
 
 
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
 # func_mode_compile arg...
 func_mode_compile ()
 {
-    $opt_debug
+    $debug_cmd
+
     # Get the compilation command and the source file.
     base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
     suppress_opt=yes
     suppress_output=
     arg_mode=normal
@@ -1965,12 +3281,12 @@ func_mode_compile ()
       case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
+	lastarg=$arg
 	arg_mode=normal
 	;;
 
       target )
-	libobj="$arg"
+	libobj=$arg
 	arg_mode=normal
 	continue
 	;;
@@ -1980,7 +3296,7 @@ func_mode_compile ()
 	case $arg in
 	-o)
 	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
+	    func_fatal_error "you cannot specify '-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
@@ -2009,12 +3325,12 @@ func_mode_compile ()
 	  func_stripname '-Wc,' '' "$arg"
 	  args=$func_stripname_result
 	  lastarg=
-	  save_ifs="$IFS"; IFS=','
+	  save_ifs=$IFS; IFS=,
 	  for arg in $args; do
-	    IFS="$save_ifs"
+	    IFS=$save_ifs
 	    func_append_quoted lastarg "$arg"
 	  done
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result
 
@@ -2027,8 +3343,8 @@ func_mode_compile ()
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
+	  lastarg=$srcfile
+	  srcfile=$arg
 	  ;;
 	esac  #  case $arg
 	;;
@@ -2043,13 +3359,13 @@ func_mode_compile ()
       func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      func_fatal_error "you must specify a target with \`-o'"
+      func_fatal_error "you must specify a target with '-o'"
       ;;
     *)
       # Get the name of the library object.
       test -z "$libobj" && {
 	func_basename "$srcfile"
-	libobj="$func_basename_result"
+	libobj=$func_basename_result
       }
       ;;
     esac
@@ -2069,7 +3385,7 @@ func_mode_compile ()
     case $libobj in
     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      func_fatal_error "cannot determine name of library object from '$libobj'"
       ;;
     esac
 
@@ -2078,8 +3394,8 @@ func_mode_compile ()
     for arg in $later; do
       case $arg in
       -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
 	build_old_libs=no
 	continue
 	;;
@@ -2105,17 +3421,17 @@ func_mode_compile ()
     func_quote_for_eval "$libobj"
     test "X$libobj" != "X$func_quote_for_eval_result" \
       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
     func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
 
     test -z "$base_compile" && \
       func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
+    if test yes = "$build_old_libs"; then
       removelist="$obj $lobj $libobj ${libobj}T"
     else
       removelist="$lobj $libobj ${libobj}T"
@@ -2127,16 +3443,16 @@ func_mode_compile ()
       pic_mode=default
       ;;
     esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
     else
       output_obj=
       need_locks=no
@@ -2145,12 +3461,12 @@ func_mode_compile ()
 
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
+    if test yes = "$need_locks"; then
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
-    elif test "$need_locks" = warn; then
+    elif test warn = "$need_locks"; then
       if test -f "$lockfile"; then
 	$ECHO "\
 *** ERROR, $lockfile exists and contains:
@@ -2158,7 +3474,7 @@ func_mode_compile ()
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2180,11 +3496,11 @@ compiler."
     qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
+    if test yes = "$build_libtool_libs"; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
-      if test "$pic_mode" != no; then
+      if test no != "$pic_mode"; then
 	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
@@ -2201,7 +3517,7 @@ compiler."
       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
-      if test "$need_locks" = warn &&
+      if test warn = "$need_locks" &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -2212,7 +3528,7 @@ $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2228,20 +3544,20 @@ compiler."
       fi
 
       # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
+      if test yes = "$suppress_opt"; then
 	suppress_output=' >/dev/null 2>&1'
       fi
     fi
 
     # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
 	# Don't build PIC code
 	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
-      if test "$compiler_c_o" = yes; then
+      if test yes = "$compiler_c_o"; then
 	func_append command " -o $obj"
       fi
 
@@ -2250,7 +3566,7 @@ compiler."
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
-      if test "$need_locks" = warn &&
+      if test warn = "$need_locks" &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -2261,7 +3577,7 @@ $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2281,7 +3597,7 @@ compiler."
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
+      if test no != "$need_locks"; then
 	removelist=$lockfile
         $RM "$lockfile"
       fi
@@ -2291,7 +3607,7 @@ compiler."
 }
 
 $opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -2311,7 +3627,7 @@ func_mode_help ()
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
@@ -2330,16 +3646,16 @@ This mode accepts the following additional options:
   -no-suppress      do not suppress compiler output for multiple passes
   -prefer-pic       try to build PIC objects only
   -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
   -Wc,FLAG          pass FLAG directly to the compiler
 
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
         ;;
 
       execute)
@@ -2352,7 +3668,7 @@ This mode accepts the following additional options:
 
   -dlopen FILE      add the directory containing FILE to the library path
 
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
@@ -2371,7 +3687,7 @@ Complete the installation of libtool libraries.
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
@@ -2381,7 +3697,7 @@ the \`--dry-run' option if you just want to see what would be executed."
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
@@ -2407,7 +3723,7 @@ The following components of LINK-COMMAND are treated specially:
   -avoid-version    do not add a version suffix if possible
   -bindir BINDIR    specify path to binaries directory (for systems where
                     libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
@@ -2421,7 +3737,8 @@ The following components of LINK-COMMAND are treated specially:
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
@@ -2441,20 +3758,20 @@ The following components of LINK-COMMAND are treated specially:
   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
 
-Every other argument is treated as a filename.  Files ending in \`.la' are
+Every other argument is treated as a filename.  Files ending in '.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
 required, except when creating a convenience library.
 
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
 
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
@@ -2465,7 +3782,7 @@ is created, otherwise an executable program is created."
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
@@ -2473,17 +3790,17 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
+        func_fatal_help "invalid operation mode '$opt_mode'"
         ;;
     esac
 
     echo
-    $ECHO "Try \`$progname --help' for more information about other modes."
+    $ECHO "Try '$progname --help' for more information about other modes."
 }
 
 # Now that we've collected a possible --mode arg, show help if necessary
 if $opt_help; then
-  if test "$opt_help" = :; then
+  if test : = "$opt_help"; then
     func_mode_help
   else
     {
@@ -2491,7 +3808,7 @@ if $opt_help; then
       for opt_mode in compile link execute install finish uninstall clean; do
 	func_mode_help
       done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
@@ -2499,7 +3816,7 @@ if $opt_help; then
 	func_mode_help
       done
     } |
-    sed '1d
+    $SED '1d
       /^When reporting/,/^Report/{
 	H
 	d
@@ -2516,16 +3833,17 @@ fi
 # func_mode_execute arg...
 func_mode_execute ()
 {
-    $opt_debug
+    $debug_cmd
+
     # The first argument is the command name.
-    cmd="$nonopt"
+    cmd=$nonopt
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
     for file in $opt_dlopen; do
       test -f "$file" \
-	|| func_fatal_help "\`$file' is not a file"
+	|| func_fatal_help "'$file' is not a file"
 
       dir=
       case $file in
@@ -2535,7 +3853,7 @@ func_mode_execute ()
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
 
 	# Read the libtool library.
 	dlname=
@@ -2546,18 +3864,18 @@ func_mode_execute ()
 	if test -z "$dlname"; then
 	  # Warn if it was a shared library.
 	  test -n "$library_names" && \
-	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	    func_warning "'$file' was not linked with '-export-dynamic'"
 	  continue
 	fi
 
 	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 
 	if test -f "$dir/$objdir/$dlname"; then
 	  func_append dir "/$objdir"
 	else
 	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
 	  fi
 	fi
 	;;
@@ -2565,18 +3883,18 @@ func_mode_execute ()
       *.lo)
 	# Just add the directory containing the .lo file.
 	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 	;;
 
       *)
-	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
       esac
 
       # Get the absolute pathname.
       absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
+      test -n "$absdir" && dir=$absdir
 
       # Now add the directory to shlibpath_var.
       if eval "test -z \"\$$shlibpath_var\""; then
@@ -2588,7 +3906,7 @@ func_mode_execute ()
 
     # This variable tells wrapper scripts just to set shlibpath_var
     # rather than running their programs.
-    libtool_execute_magic="$magic"
+    libtool_execute_magic=$magic
 
     # Check if any of the arguments is a wrapper script.
     args=
@@ -2601,12 +3919,12 @@ func_mode_execute ()
 	if func_ltwrapper_script_p "$file"; then
 	  func_source "$file"
 	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
+	  file=$progdir/$program
 	elif func_ltwrapper_executable_p "$file"; then
 	  func_ltwrapper_scriptname "$file"
 	  func_source "$func_ltwrapper_scriptname_result"
 	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
+	  file=$progdir/$program
 	fi
 	;;
       esac
@@ -2614,7 +3932,15 @@ func_mode_execute ()
       func_append_quoted args "$file"
     done
 
-    if test "X$opt_dry_run" = Xfalse; then
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
       if test -n "$shlibpath_var"; then
 	# Export the shlibpath_var.
 	eval "export $shlibpath_var"
@@ -2631,25 +3957,18 @@ func_mode_execute ()
       done
 
       # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
+      exec_cmd=\$cmd$args
     fi
 }
 
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
-    $opt_debug
+    $debug_cmd
+
     libs=
     libdirs=
     admincmds=
@@ -2663,11 +3982,11 @@ func_mode_finish ()
 	if func_lalib_unsafe_p "$opt"; then
 	  func_append libs " $opt"
 	else
-	  func_warning "\`$opt' is not a valid libtool archive"
+	  func_warning "'$opt' is not a valid libtool archive"
 	fi
 
       else
-	func_fatal_error "invalid argument \`$opt'"
+	func_fatal_error "invalid argument '$opt'"
       fi
     done
 
@@ -2682,12 +4001,12 @@ func_mode_finish ()
       # Remove sysroot references
       if $opt_dry_run; then
         for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
         done
       else
         tmpdir=`func_mktempdir`
         for lib in $libs; do
-	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
 	    > $tmpdir/tmp-la
 	  mv -f $tmpdir/tmp-la $lib
 	done
@@ -2712,7 +4031,7 @@ func_mode_finish ()
     fi
 
     # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
+    $opt_quiet && exit $EXIT_SUCCESS
 
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       echo "----------------------------------------------------------------------"
@@ -2723,27 +4042,27 @@ func_mode_finish ()
       echo
       echo "If you ever happen to want to link against installed libraries"
       echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
       echo "flag during linking and do at least one of the following:"
       if test -n "$shlibpath_var"; then
-	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
 	echo "     during execution"
       fi
       if test -n "$runpath_var"; then
-	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
 	echo "     during linking"
       fi
       if test -n "$hardcode_libdir_flag_spec"; then
 	libdir=LIBDIR
 	eval flag=\"$hardcode_libdir_flag_spec\"
 
-	$ECHO "   - use the \`$flag' linker flag"
+	$ECHO "   - use the '$flag' linker flag"
       fi
       if test -n "$admincmds"; then
 	$ECHO "   - have your system administrator run these commands:$admincmds"
       fi
       if test -f /etc/ld.so.conf; then
-	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
       fi
       echo
 
@@ -2762,18 +4081,20 @@ func_mode_finish ()
     exit $EXIT_SUCCESS
 }
 
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
 func_mode_install ()
 {
-    $opt_debug
+    $debug_cmd
+
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2800,7 +4121,7 @@ func_mode_install ()
     opts=
     prev=
     install_type=
-    isdir=no
+    isdir=false
     stripme=
     no_mode=:
     for arg
@@ -2813,7 +4134,7 @@ func_mode_install ()
       fi
 
       case $arg in
-      -d) isdir=yes ;;
+      -d) isdir=: ;;
       -f)
 	if $install_cp; then :; else
 	  prev=$arg
@@ -2831,7 +4152,7 @@ func_mode_install ()
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
 	    arg2=$install_override_mode
 	    no_mode=false
 	  fi
@@ -2856,7 +4177,7 @@ func_mode_install ()
       func_fatal_help "you must specify an install program"
 
     test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
+      func_fatal_help "the '$prev' option requires an argument"
 
     if test -n "$install_override_mode" && $no_mode; then
       if $install_cp; then :; else
@@ -2878,19 +4199,19 @@ func_mode_install ()
     dest=$func_stripname_result
 
     # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
       destname=
     else
       func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
+      destdir=$func_dirname_result
+      destname=$func_basename_result
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files; shift
       test "$#" -gt 1 && \
-	func_fatal_help "\`$dest' is not a directory"
+	func_fatal_help "'$dest' is not a directory"
     fi
     case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -2899,7 +4220,7 @@ func_mode_install ()
 	case $file in
 	*.lo) ;;
 	*)
-	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  func_fatal_help "'$destdir' must be an absolute directory name"
 	  ;;
 	esac
       done
@@ -2908,7 +4229,7 @@ func_mode_install ()
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic="$magic"
+    libtool_install_magic=$magic
 
     staticlibs=
     future_libdirs=
@@ -2928,7 +4249,7 @@ func_mode_install ()
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$file' is not a valid libtool archive"
+	  || func_fatal_help "'$file' is not a valid libtool archive"
 
 	library_names=
 	old_library=
@@ -2950,7 +4271,7 @@ func_mode_install ()
 	fi
 
 	func_dirname "$file" "/" ""
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 	func_append dir "$objdir"
 
 	if test -n "$relink_command"; then
@@ -2964,7 +4285,7 @@ func_mode_install ()
 	  # are installed into $libdir/../bin (currently, that works fine)
 	  # but it's something to keep an eye on.
 	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
@@ -2973,29 +4294,36 @@ func_mode_install ()
 	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
-	  func_warning "relinking \`$file'"
+	  func_warning "relinking '$file'"
 	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
 	fi
 
 	# See the names of the shared library.
 	set dummy $library_names; shift
 	if test -n "$1"; then
-	  realname="$1"
+	  realname=$1
 	  shift
 
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
 
 	  # Install the shared library and build the symlinks.
 	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
-	  tstripme="$stripme"
+	  tstripme=$stripme
 	  case $host_os in
 	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
-	      tstripme=""
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
 	      ;;
 	    esac
 	    ;;
@@ -3006,7 +4334,7 @@ func_mode_install ()
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
 	    # so we also need to try rm && ln -s.
 	    for linkname
@@ -3017,14 +4345,14 @@ func_mode_install ()
 	  fi
 
 	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
+	  lib=$destdir/$realname
 	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
 	# Install the pseudo-library for information purposes.
 	func_basename "$file"
-	name="$func_basename_result"
-	instname="$dir/$name"i
+	name=$func_basename_result
+	instname=$dir/${name}i
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
@@ -3036,11 +4364,11 @@ func_mode_install ()
 
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+	  destfile=$destdir/$destname
 	else
 	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
 	fi
 
 	# Deduce the name of the destination old-style object file.
@@ -3050,11 +4378,11 @@ func_mode_install ()
 	  staticdest=$func_lo2o_result
 	  ;;
 	*.$objext)
-	  staticdest="$destfile"
+	  staticdest=$destfile
 	  destfile=
 	  ;;
 	*)
-	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
 	  ;;
 	esac
 
@@ -3063,7 +4391,7 @@ func_mode_install ()
 	  func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
+	if test yes = "$build_old_libs"; then
 	  # Deduce the name of the old-style object file.
 	  func_lo2o "$file"
 	  staticobj=$func_lo2o_result
@@ -3075,23 +4403,23 @@ func_mode_install ()
       *)
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+	  destfile=$destdir/$destname
 	else
 	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
 	fi
 
 	# If the file is missing, and there is a .exe on the end, strip it
 	# because it is most likely a libtool script we actually want to
 	# install
-	stripped_ext=""
+	stripped_ext=
 	case $file in
 	  *.exe)
 	    if test ! -f "$file"; then
 	      func_stripname '' '.exe' "$file"
 	      file=$func_stripname_result
-	      stripped_ext=".exe"
+	      stripped_ext=.exe
 	    fi
 	    ;;
 	esac
@@ -3119,19 +4447,19 @@ func_mode_install ()
 
 	  # Check the variables that should have been set.
 	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
 
-	  finalize=yes
+	  finalize=:
 	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
 	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "\`$lib' has not been installed in \`$libdir'"
-	      finalize=no
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
 	    fi
 	  done
 
@@ -3139,29 +4467,29 @@ func_mode_install ()
 	  func_source "$wrapper"
 
 	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
+	  if test no = "$fast_install" && test -n "$relink_command"; then
 	    $opt_dry_run || {
-	      if test "$finalize" = yes; then
+	      if $finalize; then
 	        tmpdir=`func_mktempdir`
 		func_basename "$file$stripped_ext"
-		file="$func_basename_result"
-	        outputname="$tmpdir/$file"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
 	        # Replace the output file specification.
 	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
-	        $opt_silent || {
+	        $opt_quiet || {
 	          func_quote_for_expand "$relink_command"
 		  eval "func_echo $func_quote_for_expand_result"
 	        }
 	        if eval "$relink_command"; then :
 	          else
-		  func_error "error: relink \`$file' with the above command before installing it"
+		  func_error "error: relink '$file' with the above command before installing it"
 		  $opt_dry_run || ${RM}r "$tmpdir"
 		  continue
 	        fi
-	        file="$outputname"
+	        file=$outputname
 	      else
-	        func_warning "cannot relink \`$file'"
+	        func_warning "cannot relink '$file'"
 	      fi
 	    }
 	  else
@@ -3198,10 +4526,10 @@ func_mode_install ()
 
     for file in $staticlibs; do
       func_basename "$file"
-      name="$func_basename_result"
+      name=$func_basename_result
 
       # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
+      oldlib=$destdir/$name
       func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
       tool_oldlib=$func_to_tool_file_result
 
@@ -3216,18 +4544,18 @@ func_mode_install ()
     done
 
     test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
+      func_warning "remember to run '$progname --finish$future_libdirs'"
 
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
     else
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -3235,16 +4563,17 @@ test "$opt_mode" = install && func_mode_install ${1+"$@"}
 # a dlpreopen symbol table.
 func_generate_dlsyms ()
 {
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
     my_dlsyms=
 
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
       if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
+	my_dlsyms=${my_outputname}S.c
       else
 	func_error "not configured to extract global symbols from dlpreopened files"
       fi
@@ -3255,7 +4584,7 @@ func_generate_dlsyms ()
       "") ;;
       *.c)
 	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
+	nlist=$output_objdir/$my_outputname.nm
 
 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
@@ -3263,34 +4592,36 @@ func_generate_dlsyms ()
 	func_verbose "creating $output_objdir/$my_dlsyms"
 
 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
 
 #ifdef __cplusplus
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
 #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
 #endif
 
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
 # define LT_DLSYM_CONST const
 #endif
 
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
 /* External symbol declarations for the compiler. */\
 "
 
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
 
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
@@ -3298,7 +4629,7 @@ extern \"C\" {
 	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
 	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
 	  done
 
@@ -3318,10 +4649,10 @@ extern \"C\" {
 
 	  # Prepare the list of exported symbols
 	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
+	    export_symbols=$output_objdir/$outputname.exp
 	    $opt_dry_run || {
 	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
 	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -3331,7 +4662,7 @@ extern \"C\" {
 	    }
 	  else
 	    $opt_dry_run || {
-	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
@@ -3345,22 +4676,22 @@ extern \"C\" {
 	fi
 
 	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_verbose "extracting global C symbols from '$dlprefile'"
 	  func_basename "$dlprefile"
-	  name="$func_basename_result"
+	  name=$func_basename_result
           case $host in
 	    *cygwin* | *mingw* | *cegcc* )
 	      # if an import library, we need to obtain dlname
 	      if func_win32_import_lib_p "$dlprefile"; then
 	        func_tr_sh "$dlprefile"
 	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
-	        dlprefile_dlbasename=""
+	        dlprefile_dlbasename=
 	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
 	          # Use subshell, to avoid clobbering current variable values
 	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-	          if test -n "$dlprefile_dlname" ; then
+	          if test -n "$dlprefile_dlname"; then
 	            func_basename "$dlprefile_dlname"
-	            dlprefile_dlbasename="$func_basename_result"
+	            dlprefile_dlbasename=$func_basename_result
 	          else
 	            # no lafile. user explicitly requested -dlpreopen <import library>.
 	            $sharedlib_from_linklib_cmd "$dlprefile"
@@ -3368,7 +4699,7 @@ extern \"C\" {
 	          fi
 	        fi
 	        $opt_dry_run || {
-	          if test -n "$dlprefile_dlbasename" ; then
+	          if test -n "$dlprefile_dlbasename"; then
 	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
 	          else
 	            func_warning "Could not compute DLL name from $name"
@@ -3424,6 +4755,11 @@ extern \"C\" {
 	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
 	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
@@ -3432,11 +4768,30 @@ typedef struct {
   void *address;
 } lt_dlsymlist;
 extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
 LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
 
 	  case $need_lib_prefix in
 	  no)
@@ -3478,9 +4833,7 @@ static const void *lt_preloaded_setup() {
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
 	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
 	    ;;
 	  esac
 	  ;;
@@ -3497,10 +4850,10 @@ static const void *lt_preloaded_setup() {
 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
 
 	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	symfileobj=$output_objdir/${my_outputname}S.$objext
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
@@ -3518,7 +4871,7 @@ static const void *lt_preloaded_setup() {
 	esac
 	;;
       *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
 	;;
       esac
     else
@@ -3532,6 +4885,32 @@ static const void *lt_preloaded_setup() {
     fi
 }
 
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
@@ -3541,8 +4920,9 @@ static const void *lt_preloaded_setup() {
 # Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
-  $opt_debug
-  win32_libid_type="unknown"
+  $debug_cmd
+
+  win32_libid_type=unknown
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
   *ar\ archive\ import\ library*) # definitely import
@@ -3552,16 +4932,29 @@ func_win32_libid ()
     # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
-	$SED -n -e '
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
 	    1,100{
 		/ I /{
-		    s,.*,import,
+		    s|.*|import|
 		    p
 		    q
 		}
 	    }'`
+	;;
+      esac
       case $win32_nmres in
       import*)  win32_libid_type="x86 archive import";;
       *)        win32_libid_type="x86 archive static";;
@@ -3593,7 +4986,8 @@ func_win32_libid ()
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib ()
 {
-  $opt_debug
+  $debug_cmd
+
   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
 }
 
@@ -3610,7 +5004,8 @@ func_cygming_dll_for_implib ()
 # specified import library.
 func_cygming_dll_for_implib_fallback_core ()
 {
-  $opt_debug
+  $debug_cmd
+
   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
     $SED '/^Contents of section '"$match_literal"':/{
@@ -3646,8 +5041,8 @@ func_cygming_dll_for_implib_fallback_core ()
       /./p' |
     # we now have a list, one entry per line, of the stringified
     # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
     # a '.' (that is, objdump's representation of an unprintable
     # character.) This should work for all archives with less than
     # 0x302f exports -- but will fail for DLLs whose name actually
@@ -3658,30 +5053,6 @@ func_cygming_dll_for_implib_fallback_core ()
     $SED -e '/^\./d;/^.\./d;q'
 }
 
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
 # func_cygming_dll_for_implib_fallback ARG
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
@@ -3695,16 +5066,17 @@ func_cygming_ms_implib_p ()
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib_fallback ()
 {
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
     # binutils import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
+  elif func_cygming_ms_implib_p "$1"; then
     # ms-generated import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
   else
     # unknown
-    sharedlib_from_linklib_result=""
+    sharedlib_from_linklib_result=
   fi
 }
 
@@ -3712,10 +5084,11 @@ func_cygming_dll_for_implib_fallback ()
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
       lockfile=$f_ex_an_ar_oldlib.lock
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
@@ -3724,7 +5097,7 @@ func_extract_an_archive ()
     fi
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
 		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
+    if test yes = "$lock_old_archive_extraction"; then
       $opt_dry_run || rm -f "$lockfile"
     fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -3738,22 +5111,23 @@ func_extract_an_archive ()
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
-    $opt_debug
-    my_gentop="$1"; shift
+    $debug_cmd
+
+    my_gentop=$1; shift
     my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
+      my_xlib=$func_basename_result
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
@@ -3765,7 +5139,7 @@ func_extract_archives ()
 	esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
 
       func_mkdir_p "$my_xdir"
 
@@ -3778,22 +5152,23 @@ func_extract_archives ()
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
 	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
 	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
 	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
 	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
 	    done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
@@ -3815,7 +5190,7 @@ func_extract_archives ()
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
-    func_extract_archives_result="$my_oldobjs"
+    func_extract_archives_result=$my_oldobjs
 }
 
 
@@ -3830,7 +5205,7 @@ func_extract_archives ()
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()
@@ -3841,7 +5216,7 @@ func_emit_wrapper ()
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
@@ -3898,9 +5273,9 @@ _LTECHO_EOF'
 
 # Very basic option parsing. These options are (a) specific to
 # the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
 # windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
 # this pattern).
 #
 # There are only two supported options: --lt-debug and
@@ -3933,7 +5308,7 @@ func_parse_lt_options ()
 
   # Print the debug banner immediately:
   if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
   fi
 }
 
@@ -3944,7 +5319,7 @@ func_lt_dump_args ()
   lt_dump_args_N=1;
   for lt_arg
   do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
   done
 }
@@ -3958,7 +5333,7 @@ func_exec_program_core ()
   *-*-mingw | *-*-os2* | *-cegcc*)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -3968,7 +5343,7 @@ func_exec_program_core ()
   *)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -4043,13 +5418,13 @@ func_exec_program ()
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
-	if test "$fast_install" = yes; then
+	if test yes = "$fast_install"; then
 	  $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
@@ -4066,7 +5441,7 @@ func_exec_program ()
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
-	$ECHO \"\$relink_command_output\" >&2
+	\$ECHO \"\$relink_command_output\" >&2
 	$RM \"\$progdir/\$file\"
 	exit 1
       fi
@@ -4101,7 +5476,7 @@ func_exec_program ()
 	fi
 
 	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -4121,7 +5496,7 @@ func_exec_program ()
     fi
   else
     # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
@@ -4140,7 +5515,7 @@ func_emit_cwrapperexe_src ()
 	cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
@@ -4175,47 +5550,45 @@ EOF
 #include <fcntl.h>
 #include <sys/stat.h>
 
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
 /* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
 # ifdef __STRICT_ANSI__
 int _putenv (const char *);
 # endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
 # ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 # endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
 #endif
 
 /* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 # define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
 # define HAVE_SETENV
 # define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
 #endif
 
-#if defined(PATH_MAX)
+#if defined PATH_MAX
 # define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
@@ -4234,8 +5607,8 @@ int setenv (const char *, const char *, int);
 # define PATH_SEPARATOR ':'
 #endif
 
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
@@ -4268,10 +5641,10 @@ int setenv (const char *, const char *, int);
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
+  if (stale) { free (stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
 static int lt_debug = 1;
 #else
 static int lt_debug = 0;
@@ -4300,11 +5673,16 @@ void lt_dump_script (FILE *f);
 EOF
 
 	    cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
-	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
               func_to_host_path "$temp_rpath"
 	      cat <<EOF
 const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
@@ -4328,7 +5706,7 @@ const char * EXE_PATH_VALUE   = "";
 EOF
 	    fi
 
-	    if test "$fast_install" = yes; then
+	    if test yes = "$fast_install"; then
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
@@ -4357,12 +5735,12 @@ main (int argc, char *argv[])
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
-  intptr_t rval = 127;
+  int rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
+  newargz = XMALLOC (char *, (size_t) argc + 1);
 
   /* very simple arg parsing; don't want to rely on getopt
    * also, copy all non cwrapper options to newargz, except
@@ -4371,10 +5749,10 @@ main (int argc, char *argv[])
   newargc=0;
   for (i = 1; i < argc; i++)
     {
-      if (strcmp (argv[i], dumpscript_opt) == 0)
+      if (STREQ (argv[i], dumpscript_opt))
 	{
 EOF
-	    case "$host" in
+	    case $host in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
 		echo "          setmode(1,_O_BINARY);"
@@ -4385,12 +5763,12 @@ EOF
 	  lt_dump_script (stdout);
 	  return 0;
 	}
-      if (strcmp (argv[i], debug_opt) == 0)
+      if (STREQ (argv[i], debug_opt))
 	{
           lt_debug = 1;
           continue;
 	}
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+      if (STREQ (argv[i], ltwrapper_option_prefix))
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
@@ -4413,7 +5791,7 @@ EOF
 EOF
 	    cat <<EOF
   /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
 EOF
 	    cat <<"EOF"
   lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -4524,7 +5902,7 @@ EOF
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
   newargz = prepare_spawn (newargz);
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
@@ -4569,7 +5947,7 @@ base_name (const char *name)
 {
   const char *base;
 
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
     name += 2;
@@ -4628,7 +6006,7 @@ find_executable (const char *wrapper)
   const char *p_next;
   /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
-  int tmp_len;
+  size_t tmp_len;
   char *concat_name;
 
   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -4638,7 +6016,7 @@ find_executable (const char *wrapper)
     return NULL;
 
   /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
     {
       concat_name = xstrdup (wrapper);
@@ -4656,7 +6034,7 @@ find_executable (const char *wrapper)
 	    return concat_name;
 	  XFREE (concat_name);
 	}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
     }
 #endif
 
@@ -4679,7 +6057,7 @@ find_executable (const char *wrapper)
 	      for (q = p; *q; q++)
 		if (IS_PATH_SEPARATOR (*q))
 		  break;
-	      p_len = q - p;
+	      p_len = (size_t) (q - p);
 	      p_next = (*q == '\0' ? q : q + 1);
 	      if (p_len == 0)
 		{
@@ -4798,7 +6176,7 @@ strendzap (char *str, const char *pat)
   if (patlen <= len)
     {
       str += len - patlen;
-      if (strcmp (str, pat) == 0)
+      if (STREQ (str, pat))
 	*str = '\0';
     }
   return str;
@@ -4863,7 +6241,7 @@ lt_setenv (const char *name, const char *value)
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
-    int len = strlen (name) + 1 + strlen (value) + 1;
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
@@ -4880,8 +6258,8 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   char *new_value;
   if (orig_value && *orig_value)
     {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
@@ -4912,10 +6290,10 @@ lt_update_exe_path (const char *name, const char *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
         {
-          new_value[len-1] = '\0';
+          new_value[--len] = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
@@ -5082,27 +6460,47 @@ EOF
 # True if ARG is an import lib, as indicated by $file_magic_cmd
 func_win32_import_lib_p ()
 {
-    $opt_debug
+    $debug_cmd
+
     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
     *import*) : ;;
     *) false ;;
     esac
 }
 
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
 # func_mode_link arg...
 func_mode_link ()
 {
-    $opt_debug
+    $debug_cmd
+
     case $host in
     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
+      # what system we are compiling for in order to pass an extra
       # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
+      # to make a dll that has undefined symbols, in which case not
       # even a static library is built.  For now, we need to specify
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
@@ -5146,10 +6544,11 @@ func_mode_link ()
     module=no
     no_install=no
     objs=
+    os2dllname=
     non_pic_objects=
     precious_files_regex=
     prefer_static_libs=no
-    preload=no
+    preload=false
     prev=
     prevarg=
     release=
@@ -5161,7 +6560,7 @@ func_mode_link ()
     vinfo=
     vinfo_number=no
     weak_libs=
-    single_module="${wl}-single_module"
+    single_module=$wl-single_module
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
@@ -5169,15 +6568,15 @@ func_mode_link ()
     do
       case $arg in
       -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
 	build_old_libs=no
 	break
 	;;
       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
 	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
@@ -5210,7 +6609,7 @@ func_mode_link ()
 
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
-      arg="$1"
+      arg=$1
       shift
       func_quote_for_eval "$arg"
       qarg=$func_quote_for_eval_unquoted_result
@@ -5227,21 +6626,21 @@ func_mode_link ()
 
 	case $prev in
 	bindir)
-	  bindir="$arg"
+	  bindir=$arg
 	  prev=
 	  continue
 	  ;;
 	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
+	  $preload || {
 	    # Add the symbol object into the linking commands.
 	    func_append compile_command " @SYMFILE@"
 	    func_append finalize_command " @SYMFILE@"
-	    preload=yes
-	  fi
+	    preload=:
+	  }
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
-	    if test "$dlself" = no; then
+	    if test no = "$dlself"; then
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
@@ -5249,9 +6648,9 @@ func_mode_link ()
 	    continue
 	    ;;
 	  self)
-	    if test "$prev" = dlprefiles; then
+	    if test dlprefiles = "$prev"; then
 	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
 	      dlself=yes
 	    else
 	      dlself=needless
@@ -5261,7 +6660,7 @@ func_mode_link ()
 	    continue
 	    ;;
 	  *)
-	    if test "$prev" = dlfiles; then
+	    if test dlfiles = "$prev"; then
 	      func_append dlfiles " $arg"
 	    else
 	      func_append dlprefiles " $arg"
@@ -5272,14 +6671,14 @@ func_mode_link ()
 	  esac
 	  ;;
 	expsyms)
-	  export_symbols="$arg"
+	  export_symbols=$arg
 	  test -f "$arg" \
-	    || func_fatal_error "symbol file \`$arg' does not exist"
+	    || func_fatal_error "symbol file '$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
-	  export_symbols_regex="$arg"
+	  export_symbols_regex=$arg
 	  prev=
 	  continue
 	  ;;
@@ -5297,7 +6696,13 @@ func_mode_link ()
 	  continue
 	  ;;
 	inst_prefix)
-	  inst_prefix_dir="$arg"
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
 	  prev=
 	  continue
 	  ;;
@@ -5321,21 +6726,21 @@ func_mode_link ()
 
 		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none &&
-		   test "$non_pic_object" = none; then
-		  func_fatal_error "cannot find name of object for \`$arg'"
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
 		func_dirname "$arg" "/" ""
-		xdir="$func_dirname_result"
+		xdir=$func_dirname_result
 
-		if test "$pic_object" != none; then
+		if test none != "$pic_object"; then
 		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
+		  pic_object=$xdir$pic_object
 
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
 		      func_append dlfiles " $pic_object"
 		      prev=
 		      continue
@@ -5346,7 +6751,7 @@ func_mode_link ()
 		  fi
 
 		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
+		  if test dlprefiles = "$prev"; then
 		    # Preload the old-style object.
 		    func_append dlprefiles " $pic_object"
 		    prev=
@@ -5354,23 +6759,23 @@ func_mode_link ()
 
 		  # A PIC object.
 		  func_append libobjs " $pic_object"
-		  arg="$pic_object"
+		  arg=$pic_object
 		fi
 
 		# Non-PIC object.
-		if test "$non_pic_object" != none; then
+		if test none != "$non_pic_object"; then
 		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
+		  non_pic_object=$xdir$non_pic_object
 
 		  # A standard non-PIC object
 		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
 		  fi
 		else
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
+		  non_pic_object=$pic_object
 		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
@@ -5378,7 +6783,7 @@ func_mode_link ()
 		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
 		  func_dirname "$arg" "/" ""
-		  xdir="$func_dirname_result"
+		  xdir=$func_dirname_result
 
 		  func_lo2o "$arg"
 		  pic_object=$xdir$objdir/$func_lo2o_result
@@ -5386,24 +6791,29 @@ func_mode_link ()
 		  func_append libobjs " $pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 	        else
-		  func_fatal_error "\`$arg' is not a valid libtool object"
+		  func_fatal_error "'$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    func_fatal_error "link input file \`$arg' does not exist"
+	    func_fatal_error "link input file '$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
 	precious_regex)
-	  precious_files_regex="$arg"
+	  precious_files_regex=$arg
 	  prev=
 	  continue
 	  ;;
 	release)
-	  release="-$arg"
+	  release=-$arg
 	  prev=
 	  continue
 	  ;;
@@ -5415,7 +6825,7 @@ func_mode_link ()
 	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
-	  if test "$prev" = rpath; then
+	  if test rpath = "$prev"; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
 	    *) func_append rpath " $arg" ;;
@@ -5430,7 +6840,7 @@ func_mode_link ()
 	  continue
 	  ;;
 	shrext)
-	  shrext_cmds="$arg"
+	  shrext_cmds=$arg
 	  prev=
 	  continue
 	  ;;
@@ -5470,7 +6880,7 @@ func_mode_link ()
 	esac
       fi # test -n "$prev"
 
-      prevarg="$arg"
+      prevarg=$arg
 
       case $arg in
       -all-static)
@@ -5484,7 +6894,7 @@ func_mode_link ()
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -5516,7 +6926,7 @@ func_mode_link ()
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
-	if test "X$arg" = "X-export-symbols"; then
+	if test X-export-symbols = "X$arg"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
@@ -5550,9 +6960,9 @@ func_mode_link ()
 	func_stripname "-L" '' "$arg"
 	if test -z "$func_stripname_result"; then
 	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between \`-L' and \`$1'"
+	    func_fatal_error "require no space between '-L' and '$1'"
 	  else
-	    func_fatal_error "need path for \`-L' option"
+	    func_fatal_error "need path for '-L' option"
 	  fi
 	fi
 	func_resolve_sysroot "$func_stripname_result"
@@ -5563,8 +6973,8 @@ func_mode_link ()
 	*)
 	  absdir=`cd "$dir" && pwd`
 	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	  dir="$absdir"
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
 	  ;;
 	esac
 	case "$deplibs " in
@@ -5599,7 +7009,7 @@ func_mode_link ()
 	;;
 
       -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
@@ -5607,11 +7017,11 @@ func_mode_link ()
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
@@ -5620,16 +7030,16 @@ func_mode_link ()
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  esac
-	elif test "X$arg" = "X-lc_r"; then
+	elif test X-lc_r = "X$arg"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -5639,6 +7049,11 @@ func_mode_link ()
 	continue
 	;;
 
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
       -module)
 	module=yes
 	continue
@@ -5668,7 +7083,7 @@ func_mode_link ()
 	;;
 
       -multi_module)
-	single_module="${wl}-multi_module"
+	single_module=$wl-multi_module
 	continue
 	;;
 
@@ -5682,8 +7097,8 @@ func_mode_link ()
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "\`-no-install' is ignored for $host"
-	  func_warning "assuming \`-no-fast-install' instead"
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -5701,6 +7116,11 @@ func_mode_link ()
 	continue
 	;;
 
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
       -o) prev=output ;;
 
       -precious-files-regex)
@@ -5788,14 +7208,14 @@ func_mode_link ()
 	func_stripname '-Wc,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs="$IFS"; IFS=','
+	save_ifs=$IFS; IFS=,
 	for flag in $args; do
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
           func_quote_for_eval "$flag"
 	  func_append arg " $func_quote_for_eval_result"
 	  func_append compiler_flags " $func_quote_for_eval_result"
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -5804,15 +7224,15 @@ func_mode_link ()
 	func_stripname '-Wl,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs="$IFS"; IFS=','
+	save_ifs=$IFS; IFS=,
 	for flag in $args; do
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
           func_quote_for_eval "$flag"
 	  func_append arg " $wl$func_quote_for_eval_result"
 	  func_append compiler_flags " $wl$func_quote_for_eval_result"
 	  func_append linker_flags " $func_quote_for_eval_result"
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -5835,7 +7255,7 @@ func_mode_link ()
       # -msg_* for osf cc
       -msg_*)
 	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
 
       # Flags to be passed through unchanged, with rationale:
@@ -5847,25 +7267,46 @@ func_mode_link ()
       # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
       # -F/path              path to uninstalled frameworks, gcc on darwin
       # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
       # @file                GCC response files
       # -tp=*                Portland pgcc target processor selection
       # --sysroot=*          for sysroot support
-      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -stdlib=*            select c++ std lib with clang
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
         func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         func_append compiler_flags " $arg"
         continue
         ;;
 
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
       # Some other compiler flag.
       -* | +*)
         func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
 
       *.$objext)
@@ -5886,21 +7327,21 @@ func_mode_link ()
 
 	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none &&
-	     test "$non_pic_object" = none; then
-	    func_fatal_error "cannot find name of object for \`$arg'"
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
 	  func_dirname "$arg" "/" ""
-	  xdir="$func_dirname_result"
+	  xdir=$func_dirname_result
 
-	  if test "$pic_object" != none; then
+	  test none = "$pic_object" || {
 	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
+	    pic_object=$xdir$pic_object
 
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
 		func_append dlfiles " $pic_object"
 		prev=
 		continue
@@ -5911,7 +7352,7 @@ func_mode_link ()
 	    fi
 
 	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
+	    if test dlprefiles = "$prev"; then
 	      # Preload the old-style object.
 	      func_append dlprefiles " $pic_object"
 	      prev=
@@ -5919,23 +7360,23 @@ func_mode_link ()
 
 	    # A PIC object.
 	    func_append libobjs " $pic_object"
-	    arg="$pic_object"
-	  fi
+	    arg=$pic_object
+	  }
 
 	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
+	  if test none != "$non_pic_object"; then
 	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
+	    non_pic_object=$xdir$non_pic_object
 
 	    # A standard non-PIC object
 	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
+	    non_pic_object=$pic_object
 	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
@@ -5943,7 +7384,7 @@ func_mode_link ()
 	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
 	    func_dirname "$arg" "/" ""
-	    xdir="$func_dirname_result"
+	    xdir=$func_dirname_result
 
 	    func_lo2o "$arg"
 	    pic_object=$xdir$objdir/$func_lo2o_result
@@ -5951,7 +7392,7 @@ func_mode_link ()
 	    func_append libobjs " $pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  else
-	    func_fatal_error "\`$arg' is not a valid libtool object"
+	    func_fatal_error "'$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -5967,11 +7408,11 @@ func_mode_link ()
 	# A libtool-controlled library.
 
 	func_resolve_sysroot "$arg"
-	if test "$prev" = dlfiles; then
+	if test dlfiles = "$prev"; then
 	  # This library was specified with -dlopen.
 	  func_append dlfiles " $func_resolve_sysroot_result"
 	  prev=
-	elif test "$prev" = dlprefiles; then
+	elif test dlprefiles = "$prev"; then
 	  # The library was specified with -dlpreopen.
 	  func_append dlprefiles " $func_resolve_sysroot_result"
 	  prev=
@@ -5986,7 +7427,7 @@ func_mode_link ()
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
       esac # arg
 
@@ -5998,9 +7439,9 @@ func_mode_link ()
     done # argument parsing loop
 
     test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
+      func_fatal_help "the '$prevarg' option requires an argument"
 
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
       func_append compile_command " $arg"
       func_append finalize_command " $arg"
@@ -6009,20 +7450,23 @@ func_mode_link ()
     oldlibs=
     # calculate the name of the file, without its directory
     func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
     func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
+    output_objdir=$func_dirname_result$objdir
     func_to_tool_file "$output_objdir/"
     tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
@@ -6045,7 +7489,7 @@ func_mode_link ()
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_preserve_dup_deps ; then
+      if $opt_preserve_dup_deps; then
 	case "$libs " in
 	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	esac
@@ -6053,7 +7497,7 @@ func_mode_link ()
       func_append libs " $deplib"
     done
 
-    if test "$linkmode" = lib; then
+    if test lib = "$linkmode"; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
       # Compute libraries that are listed more than once in $predeps
@@ -6085,7 +7529,7 @@ func_mode_link ()
 	  case $file in
 	  *.la) ;;
 	  *)
-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -6093,7 +7537,7 @@ func_mode_link ()
     prog)
 	compile_deplibs=
 	finalize_deplibs=
-	alldeplibs=no
+	alldeplibs=false
 	newdlfiles=
 	newdlprefiles=
 	passes="conv scan dlopen dlpreopen link"
@@ -6105,29 +7549,29 @@ func_mode_link ()
     for pass in $passes; do
       # The preopen pass in lib mode reverses $deplibs; put it back here
       # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
+      if test lib,link = "$linkmode,$pass"; then
 	## FIXME: Find the place where the list is rebuilt in the wrong
 	##        order, and fix it there properly
         tmp_deplibs=
 	for deplib in $deplibs; do
 	  tmp_deplibs="$deplib $tmp_deplibs"
 	done
-	deplibs="$tmp_deplibs"
+	deplibs=$tmp_deplibs
       fi
 
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
 	deplibs=
       fi
-      if test "$linkmode" = prog; then
+      if test prog = "$linkmode"; then
 	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+      if test lib,dlpreopen = "$linkmode,$pass"; then
 	# Collect and forward deplibs of preopened libtool libs
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
@@ -6148,26 +7592,26 @@ func_mode_link ()
 	    esac
 	  done
 	done
-	libs="$dlprefiles"
+	libs=$dlprefiles
       fi
-      if test "$pass" = dlopen; then
+      if test dlopen = "$pass"; then
 	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
+	save_deplibs=$deplibs
 	deplibs=
       fi
 
       for deplib in $libs; do
 	lib=
-	found=no
+	found=false
 	case $deplib in
 	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
         |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	  if test "$linkmode,$pass" = "prog,link"; then
+	  if test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    func_append compiler_flags " $deplib"
-	    if test "$linkmode" = lib ; then
+	    if test lib = "$linkmode"; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6177,13 +7621,13 @@ func_mode_link ()
 	  continue
 	  ;;
 	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    func_warning "\`-l' is ignored for archives/objects"
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
 	    continue
 	  fi
 	  func_stripname '-l' '' "$deplib"
 	  name=$func_stripname_result
-	  if test "$linkmode" = lib; then
+	  if test lib = "$linkmode"; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -6191,31 +7635,22 @@ func_mode_link ()
 	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
+	      lib=$searchdir/lib$name$search_ext
 	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
+		if test .la = "$search_ext"; then
+		  found=:
 		else
-		  found=no
+		  found=false
 		fi
 		break 2
 	      fi
 	    done
 	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
+	  if $found; then
+	    # deplib is a libtool library
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
 		if func_lalib_p "$lib"; then
@@ -6223,19 +7658,19 @@ func_mode_link ()
 		  old_library=
 		  func_source "$lib"
 		  for l in $old_library $library_names; do
-		    ll="$l"
+		    ll=$l
 		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
 		    func_dirname "$lib" "" "."
-		    ladir="$func_dirname_result"
+		    ladir=$func_dirname_result
 		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
+		    if test prog,link = "$linkmode,$pass"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
@@ -6244,15 +7679,25 @@ func_mode_link ()
 	      *) ;;
 	      esac
 	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
 	  fi
 	  ;; # -l
 	*.ltframework)
-	  if test "$linkmode,$pass" = "prog,link"; then
+	  if test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    deplibs="$deplib $deplibs"
-	    if test "$linkmode" = lib ; then
+	    if test lib = "$linkmode"; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6265,18 +7710,18 @@ func_mode_link ()
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
+	    test conv = "$pass" && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    func_stripname '-L' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  prog)
-	    if test "$pass" = conv; then
+	    if test conv = "$pass"; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
-	    if test "$pass" = scan; then
+	    if test scan = "$pass"; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -6287,13 +7732,13 @@ func_mode_link ()
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  *)
-	    func_warning "\`-L' is ignored for archives/objects"
+	    func_warning "'-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
-	  if test "$pass" = link; then
+	  if test link = "$pass"; then
 	    func_stripname '-R' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    dir=$func_resolve_sysroot_result
@@ -6311,7 +7756,7 @@ func_mode_link ()
 	  lib=$func_resolve_sysroot_result
 	  ;;
 	*.$libext)
-	  if test "$pass" = conv; then
+	  if test conv = "$pass"; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
@@ -6322,21 +7767,26 @@ func_mode_link ()
 	    case " $dlpreconveniencelibs " in
 	    *" $deplib "*) ;;
 	    *)
-	      valid_a_lib=no
+	      valid_a_lib=false
 	      case $deplibs_check_method in
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=yes
+		    valid_a_lib=:
 		  fi
 		;;
 		pass_all)
-		  valid_a_lib=yes
+		  valid_a_lib=:
 		;;
 	      esac
-	      if test "$valid_a_lib" != yes; then
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
 		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
 		echo "*** I have the capability to make that library automatically link in when"
@@ -6344,18 +7794,13 @@ func_mode_link ()
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because the file extensions .$libext of this argument makes me believe"
 		echo "*** that it is just a static archive that I should not use here."
-	      else
-		echo
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
 	      fi
 	      ;;
 	    esac
 	    continue
 	    ;;
 	  prog)
-	    if test "$pass" != link; then
+	    if test link != "$pass"; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -6366,10 +7811,10 @@ func_mode_link ()
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
-	  if test "$pass" = conv; then
+	  if test conv = "$pass"; then
 	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
 	      func_append newdlprefiles " $deplib"
@@ -6382,22 +7827,20 @@ func_mode_link ()
 	  continue
 	  ;;
 	%DEPLIBS%)
-	  alldeplibs=yes
+	  alldeplibs=:
 	  continue
 	  ;;
 	esac # case $deplib
 
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	fi
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
 
 	func_dirname "$lib" "" "."
-	ladir="$func_dirname_result"
+	ladir=$func_dirname_result
 
 	dlname=
 	dlopen=
@@ -6427,30 +7870,30 @@ func_mode_link ()
 	  done
 	fi
 	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
 	  test -n "$dlopen" && func_append dlfiles " $dlopen"
 	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
 	fi
 
-	if test "$pass" = conv; then
+	if test conv = "$pass"; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for \`$lib'"
+	      func_fatal_error "cannot find name of link library for '$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    func_fatal_error "\`$lib' is not a convenience library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
 	  fi
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    deplibs="$deplib $deplibs"
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -6464,26 +7907,26 @@ func_mode_link ()
 	# Get the name of the library we link against.
 	linklib=
 	if test -n "$old_library" &&
-	   { test "$prefer_static_libs" = yes ||
-	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
 	  linklib=$old_library
 	else
 	  for l in $old_library $library_names; do
-	    linklib="$l"
+	    linklib=$l
 	  done
 	fi
 	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for \`$lib'"
+	  func_fatal_error "cannot find name of link library for '$lib'"
 	fi
 
 	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	  fi
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
 	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
@@ -6497,40 +7940,40 @@ func_mode_link ()
 
 	# We need an absolute path.
 	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "cannot determine absolute directory name of '$ladir'"
 	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir="$ladir"
+	    abs_ladir=$ladir
 	  fi
 	  ;;
 	esac
 	func_basename "$lib"
-	laname="$func_basename_result"
+	laname=$func_basename_result
 
 	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
+	if test yes = "$installed"; then
 	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    func_warning "library \`$lib' was moved."
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
 	  else
-	    dir="$lt_sysroot$libdir"
-	    absdir="$lt_sysroot$libdir"
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
 	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
+	    dir=$ladir
+	    absdir=$abs_ladir
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  fi
@@ -6539,11 +7982,11 @@ func_mode_link ()
 	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
 	  fi
-	  case "$host" in
+	  case $host in
 	    # special handling for platforms with PE-DLLs.
 	    *cygwin* | *mingw* | *cegcc* )
 	      # Linker will automatically link against shared library if both
@@ -6587,9 +8030,9 @@ func_mode_link ()
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
-	  if test "$linkmode" = lib; then
+	  if test lib = "$linkmode"; then
 	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
+	  elif test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
@@ -6599,14 +8042,14 @@ func_mode_link ()
 	fi
 
 
-	if test "$linkmode" = prog && test "$pass" != link; then
+	if test prog = "$linkmode" && test link != "$pass"; then
 	  func_append newlib_search_path " $ladir"
 	  deplibs="$lib $deplibs"
 
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
 	  fi
 
 	  tmp_libs=
@@ -6618,14 +8061,14 @@ func_mode_link ()
 		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
+	    if $linkalldeplibs; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -6635,15 +8078,15 @@ func_mode_link ()
 	  continue
 	fi # $linkmode = prog...
 
-	if test "$linkmode,$pass" = "prog,link"; then
+	if test prog,link = "$linkmode,$pass"; then
 	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
 	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath:" in
+	      case $temp_rpath: in
 	      *"$absdir:"*) ;;
 	      *) func_append temp_rpath "$absdir:" ;;
 	      esac
@@ -6672,9 +8115,9 @@ func_mode_link ()
 	    esac
 	  fi # $linkmode,$pass = prog,link...
 
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
 		 test -n "$library_names"; }; }; then
 	    # We only need to search for static libraries
 	    continue
@@ -6683,19 +8126,19 @@ func_mode_link ()
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes; then
+	if test built = "$use_static_libs" && test yes = "$installed"; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
 	  case $host in
-	  *cygwin* | *mingw* | *cegcc*)
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
 	      # No point in relinking DLLs because paths are not encoded
 	      func_append notinst_deplibs " $lib"
 	      need_relink=no
 	    ;;
 	  *)
-	    if test "$installed" = no; then
+	    if test no = "$installed"; then
 	      func_append notinst_deplibs " $lib"
 	      need_relink=yes
 	    fi
@@ -6705,24 +8148,24 @@ func_mode_link ()
 
 	  # Warn about portability, can't link against -module's on some
 	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=""
+	  dlopenmodule=
 	  for dlpremoduletest in $dlprefiles; do
 	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule="$dlpremoduletest"
+	      dlopenmodule=$dlpremoduletest
 	      break
 	    fi
 	  done
-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
 	    echo
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
 	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
 	    $ECHO "*** $linklib is not portable!"
 	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
@@ -6750,43 +8193,43 @@ func_mode_link ()
 	    # figure out the soname
 	    set dummy $library_names
 	    shift
-	    realname="$1"
+	    realname=$1
 	    shift
 	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
-	      soname="$dlname"
+	      soname=$dlname
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw* | *cegcc*)
+	      *cygwin* | mingw* | *cegcc* | *os2*)
 	        func_arith $current - $age
 		major=$func_arith_result
-		versuffix="-$major"
+		versuffix=-$major
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
-	      soname="$realname"
+	      soname=$realname
 	    fi
 
 	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
+	    soroot=$soname
 	    func_basename "$soroot"
-	    soname="$func_basename_result"
+	    soname=$func_basename_result
 	    func_stripname 'lib' '.dll' "$soname"
 	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_verbose "extracting exported symbol list from '$soname'"
 	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for \`$soname'"
+	      func_verbose "generating import library for '$soname'"
 	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
@@ -6794,58 +8237,58 @@ func_mode_link ()
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    lib_linked=yes
 	    case $hardcode_action in
 	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
 		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
+		    *-*-unixware7*) add_dir=-L$dir ;;
 		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we can not
+		    # if the lib is a (non-dlopened) module then we cannot
 		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": [^:]* bundle" >/dev/null ; then
+			 $GREP ": [^:]* bundle" >/dev/null; then
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library" ; then
+			if test -z "$old_library"; then
 			  echo
 			  echo "*** And there doesn't seem to be a static archive available"
 			  echo "*** The link will probably fail, sorry"
 			else
-			  add="$dir/$old_library"
+			  add=$dir/$old_library
 			fi
 		      elif test -n "$old_library"; then
-			add="$dir/$old_library"
+			add=$dir/$old_library
 		      fi
 		    fi
 		esac
-	      elif test "$hardcode_minus_L" = no; then
+	      elif test no = "$hardcode_minus_L"; then
 		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
+		*-*-sunos*) add_shlibpath=$dir ;;
 		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes &&
-	         test "$hardcode_direct_absolute" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$absdir"
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
@@ -6854,10 +8297,10 @@ func_mode_link ()
 		      ;;
 		  esac
 		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
 	      else
 		lib_linked=no
 	      fi
@@ -6865,7 +8308,7 @@ func_mode_link ()
 	    *) lib_linked=no ;;
 	    esac
 
-	    if test "$lib_linked" != yes; then
+	    if test yes != "$lib_linked"; then
 	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
@@ -6875,15 +8318,15 @@ func_mode_link ()
 	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
 	      esac
 	    fi
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes &&
-		 test "$hardcode_shlibpath_var" = yes; then
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) func_append finalize_shlibpath "$libdir:" ;;
@@ -6892,33 +8335,33 @@ func_mode_link ()
 	    fi
 	  fi
 
-	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes &&
-	       test "$hardcode_direct_absolute" = no; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
 	      *) func_append finalize_shlibpath "$libdir:" ;;
 	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
 	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-		add="$inst_prefix_dir$libdir/$linklib"
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
 	      else
-		add="$libdir/$linklib"
+		add=$libdir/$linklib
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
+	      add_dir=-L$libdir
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
@@ -6927,10 +8370,10 @@ func_mode_link ()
 		    ;;
 		esac
 	      fi
-	      add="-l$name"
+	      add=-l$name
 	    fi
 
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
@@ -6938,43 +8381,43 @@ func_mode_link ()
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
-	elif test "$linkmode" = prog; then
+	elif test prog = "$linkmode"; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
 	    compile_deplibs="$dir/$linklib $compile_deplibs"
 	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
 	    compile_deplibs="-l$name -L$dir $compile_deplibs"
 	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
-	elif test "$build_libtool_libs" = yes; then
+	elif test yes = "$build_libtool_libs"; then
 	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
+	  if test pass_all != "$deplibs_check_method"; then
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
 	    echo
-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
 	    echo "*** I have the capability to make that library automatically link in when"
 	    echo "*** you link to this library.  But I can only do this if you have a"
 	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
+	    if test yes = "$module"; then
 	      echo "*** But as you try to build a module library, libtool will still create "
 	      echo "*** a static module, that should work as long as the dlopening application"
 	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
 		echo
 		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
 		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
 	      fi
-	      if test "$build_old_libs" = no; then
+	      if test no = "$build_old_libs"; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -6987,11 +8430,11 @@ func_mode_link ()
 	  fi
 	fi # link shared/static library?
 
-	if test "$linkmode" = lib; then
+	if test lib = "$linkmode"; then
 	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
@@ -7005,12 +8448,12 @@ func_mode_link ()
 	      *) func_append temp_deplibs " $libdir";;
 	      esac
 	    done
-	    dependency_libs="$temp_deplibs"
+	    dependency_libs=$temp_deplibs
 	  fi
 
 	  func_append newlib_search_path " $absdir"
 	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
@@ -7020,7 +8463,7 @@ func_mode_link ()
                    func_resolve_sysroot "$func_stripname_result";;
               *) func_resolve_sysroot "$deplib" ;;
             esac
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $func_resolve_sysroot_result "*)
                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -7029,12 +8472,12 @@ func_mode_link ()
 	    func_append tmp_libs " $func_resolve_sysroot_result"
 	  done
 
-	  if test "$link_all_deplibs" != no; then
+	  if test no != "$link_all_deplibs"; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
 	      path=
 	      case $deplib in
-	      -L*) path="$deplib" ;;
+	      -L*) path=$deplib ;;
 	      *.la)
 	        func_resolve_sysroot "$deplib"
 	        deplib=$func_resolve_sysroot_result
@@ -7042,12 +8485,12 @@ func_mode_link ()
 		dir=$func_dirname_result
 		# We need an absolute path.
 		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of \`$dir'"
-		    absdir="$dir"
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
 		  fi
 		  ;;
 		esac
@@ -7055,35 +8498,35 @@ func_mode_link ()
 		case $host in
 		*-*-darwin*)
 		  depdepl=
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
 		      path=
 		    fi
 		  fi
 		  ;;
 		*)
-		  path="-L$absdir/$objdir"
+		  path=-L$absdir/$objdir
 		  ;;
 		esac
 		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  test -z "$libdir" && \
-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
 		  test "$absdir" != "$libdir" && \
-		    func_warning "\`$deplib' seems to be moved"
+		    func_warning "'$deplib' seems to be moved"
 
-		  path="-L$absdir"
+		  path=-L$absdir
 		fi
 		;;
 	      esac
@@ -7095,23 +8538,23 @@ func_mode_link ()
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
-      if test "$pass" = link; then
-	if test "$linkmode" = "prog"; then
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
 	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
@@ -7121,12 +8564,12 @@ func_mode_link ()
 	    esac
 	  done
 	  newlib_search_path=
-	fi
+	}
 
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
+	if test prog,link = "$linkmode,$pass"; then
 	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
 	fi
 	for var in $vars dependency_libs; do
 	  # Add libraries to $var in reverse order
@@ -7184,62 +8627,93 @@ func_mode_link ()
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
       # Last step: remove runtime libs from dependency_libs
       # (they stay in deplibs)
       tmp_libs=
-      for i in $dependency_libs ; do
+      for i in $dependency_libs; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
 	*" $i "*)
-	  i=""
+	  i=
 	  ;;
 	esac
-	if test -n "$i" ; then
+	if test -n "$i"; then
 	  func_append tmp_libs " $i"
 	fi
       done
       dependency_libs=$tmp_libs
     done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
     fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
     fi
 
     case $linkmode in
     oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for archives"
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+	func_warning "'-l' and '-L' are ignored for archives" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for archives"
+	func_warning "'-rpath' is ignored for archives"
 
       test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for archives"
+	func_warning "'-R' is ignored for archives"
 
       test -n "$vinfo" && \
-	func_warning "\`-version-info/-version-number' is ignored for archives"
+	func_warning "'-version-info/-version-number' is ignored for archives"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for archives"
+	func_warning "'-release' is ignored for archives"
 
       test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "\`-export-symbols' is ignored for archives"
+	func_warning "'-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
-      oldlibs="$output"
+      oldlibs=$output
       func_append objs "$old_deplibs"
       ;;
 
     lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
+      # Make sure we only generate libraries of the form 'libNAME.la'.
       case $outputname in
       lib*)
 	func_stripname 'lib' '.la' "$outputname"
@@ -7248,10 +8722,10 @@ func_mode_link ()
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	test "$module" = no && \
-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
 
-	if test "$need_lib_prefix" != no; then
+	if test no != "$need_lib_prefix"; then
 	  # Add the "lib" prefix for modules if required
 	  func_stripname '' '.la' "$outputname"
 	  name=$func_stripname_result
@@ -7265,8 +8739,8 @@ func_mode_link ()
       esac
 
       if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
 	else
 	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -7275,21 +8749,21 @@ func_mode_link ()
 	fi
       fi
 
-      test "$dlself" != no && \
-	func_warning "\`-dlopen self' is ignored for libtool libraries"
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
       shift
-      test "$#" -gt 1 && \
-	func_warning "ignoring multiple \`-rpath's for a libtool library"
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
 
-      install_libdir="$1"
+      install_libdir=$1
 
       oldlibs=
       if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
+	if test yes = "$build_libtool_libs"; then
 	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
+	  # Some compilers have problems with a '.al' extension so
 	  # convenience libraries should have the same extension an
 	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -7298,20 +8772,20 @@ func_mode_link ()
 	fi
 
 	test -n "$vinfo" && \
-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
 
 	test -n "$release" && \
-	  func_warning "\`-release' is ignored for convenience libraries"
+	  func_warning "'-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
+	save_ifs=$IFS; IFS=:
 	set dummy $vinfo 0 0 0
 	shift
-	IFS="$save_ifs"
+	IFS=$save_ifs
 
 	test -n "$7" && \
-	  func_fatal_help "too many parameters to \`-version-info'"
+	  func_fatal_help "too many parameters to '-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -7319,42 +8793,42 @@ func_mode_link ()
 
 	case $vinfo_number in
 	yes)
-	  number_major="$1"
-	  number_minor="$2"
-	  number_revision="$3"
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
+	  # that has an extra 1 added just for fun
 	  #
 	  case $version_type in
 	  # correct linux to gnu/linux during the next big refactor
-	  darwin|linux|osf|windows|none)
+	  darwin|freebsd-elf|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_revision"
+	    age=$number_minor
+	    revision=$number_revision
 	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
 	    ;;
 	  irix|nonstopux)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_minor"
+	    age=$number_minor
+	    revision=$number_minor
 	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
 	no)
-	  current="$1"
-	  revision="$2"
-	  age="$3"
+	  current=$1
+	  revision=$2
+	  age=$3
 	  ;;
 	esac
 
@@ -7362,30 +8836,30 @@ func_mode_link ()
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "AGE \`$age' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -7400,26 +8874,36 @@ func_mode_link ()
 	  # verstring for coding it into the library header
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
+	  versuffix=$major.$age.$revision
 	  # Darwin ld doesn't like 0 for these options...
 	  func_arith $current + 1
 	  minor_current=$func_arith_result
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
 	  ;;
 
 	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
+	  major=.$current
+	  versuffix=.$current.$revision
 	  ;;
 
 	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current"
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
 	  ;;
 
 	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
+	  if test no = "$lt_irix_increment"; then
 	    func_arith $current - $age
 	  else
 	    func_arith $current - $age + 1
@@ -7430,69 +8914,74 @@ func_mode_link ()
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
-	  verstring="$verstring_prefix$major.$revision"
+	  verstring=$verstring_prefix$major.$revision
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
-	  while test "$loop" -ne 0; do
+	  while test 0 -ne "$loop"; do
 	    func_arith $revision - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring="$verstring_prefix$major.$iface:$verstring"
+	    verstring=$verstring_prefix$major.$iface:$verstring
 	  done
 
-	  # Before this point, $major must not contain `.'.
+	  # Before this point, $major must not contain '.'.
 	  major=.$major
-	  versuffix="$major.$revision"
+	  versuffix=$major.$revision
 	  ;;
 
 	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
+	  versuffix=$major.$age.$revision
 	  ;;
 
 	osf)
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
-	  while test "$loop" -ne 0; do
+	  while test 0 -ne "$loop"; do
 	    func_arith $current - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring="$verstring:${iface}.0"
+	    verstring=$verstring:$iface.0
 	  done
 
 	  # Make executables depend on our current version.
-	  func_append verstring ":${current}.0"
+	  func_append verstring ":$current.0"
 	  ;;
 
 	qnx)
-	  major=".$current"
-	  versuffix=".$current"
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
 	  ;;
 
 	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
+	  major=.$current
+	  versuffix=.$current.$revision
 	  ;;
 
 	windows)
 	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
+	  # extension on DOS 8.3 file systems.
 	  func_arith $current - $age
 	  major=$func_arith_result
-	  versuffix="-$major"
+	  versuffix=-$major
 	  ;;
 
 	*)
-	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  func_fatal_configuration "unknown library version type '$version_type'"
 	  ;;
 	esac
 
@@ -7506,42 +8995,45 @@ func_mode_link ()
 	    verstring=
 	    ;;
 	  *)
-	    verstring="0.0"
+	    verstring=0.0
 	    ;;
 	  esac
-	  if test "$need_version" = no; then
+	  if test no = "$need_version"; then
 	    versuffix=
 	  else
-	    versuffix=".0.0"
+	    versuffix=.0.0
 	  fi
 	fi
 
 	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
+	if test yes,no = "$avoid_version,$need_version"; then
 	  major=
 	  versuffix=
-	  verstring=""
+	  verstring=
 	fi
 
 	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    func_warning "undefined symbols not allowed in $host shared libraries"
-	    build_libtool_libs=no
-	    build_old_libs=yes
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
 	  fi
 	else
 	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
+	  allow_undefined_flag=$no_undefined_flag
 	fi
 
       fi
 
-      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_generate_dlsyms "$libname" "$libname" :
       func_append libobjs " $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
+      test " " = "$libobjs" && libobjs=
 
-      if test "$opt_mode" != relink; then
+      if test relink != "$opt_mode"; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
@@ -7550,8 +9042,8 @@ func_mode_link ()
 	  case $p in
 	    *.$objext | *.gcno)
 	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
 		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 		 then
 		   continue
@@ -7567,11 +9059,11 @@ func_mode_link ()
       fi
 
       # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
 	func_append oldlibs " $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
@@ -7592,13 +9084,13 @@ func_mode_link ()
 	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
 
       # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
+      old_dlfiles=$dlfiles
       dlfiles=
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
@@ -7608,7 +9100,7 @@ func_mode_link ()
       done
 
       # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
+      old_dlprefiles=$dlprefiles
       dlprefiles=
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
@@ -7617,7 +9109,7 @@ func_mode_link ()
 	esac
       done
 
-      if test "$build_libtool_libs" = yes; then
+      if test yes = "$build_libtool_libs"; then
 	if test -n "$rpath"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -7641,7 +9133,7 @@ func_mode_link ()
 	    ;;
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
+	    if test yes = "$build_libtool_need_lc"; then
 	      func_append deplibs " -lc"
 	    fi
 	    ;;
@@ -7657,9 +9149,9 @@ func_mode_link ()
 	# I'm not sure if I'm treating the release correctly.  I think
 	# release should show up in the -l (ie -lgmp5) so we don't want to
 	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
+	release=
+	versuffix=
+	major=
 	newdeplibs=
 	droppeddeps=no
 	case $deplibs_check_method in
@@ -7688,20 +9180,20 @@ EOF
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
 		    func_append newdeplibs " $i"
-		    i=""
+		    i=
 		    ;;
 		  esac
 		fi
-		if test -n "$i" ; then
+		if test -n "$i"; then
 		  libname=`eval "\\$ECHO \"$libname_spec\""`
 		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
 		    func_append newdeplibs " $i"
 		  else
 		    droppeddeps=yes
@@ -7731,20 +9223,20 @@ EOF
 		$opt_dry_run || $RM conftest
 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
 		      func_append newdeplibs " $i"
-		      i=""
+		      i=
 		      ;;
 		    esac
 		  fi
-		  if test -n "$i" ; then
+		  if test -n "$i"; then
 		    libname=`eval "\\$ECHO \"$libname_spec\""`
 		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
 		      func_append newdeplibs " $i"
 		    else
 		      droppeddeps=yes
@@ -7781,24 +9273,24 @@ EOF
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
+		  a_deplib=
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		if test -n "$file_magic_glob"; then
 		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
 		else
 		  libnameglob=$libname
 		fi
-		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  if test "$want_nocaseglob" = yes; then
+		  if test yes = "$want_nocaseglob"; then
 		    shopt -s nocaseglob
 		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
 		    $nocaseglob
@@ -7816,25 +9308,25 @@ EOF
 		      # We might still enter an endless loop, since a link
 		      # loop can be closed while we follow links,
 		      # but so what?
-		      potlib="$potent_lib"
+		      potlib=$potent_lib
 		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
 			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then
 			func_append newdeplibs " $a_deplib"
-			a_deplib=""
+			a_deplib=
 			break 2
 		      fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7842,7 +9334,7 @@ EOF
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
+		if test -z "$potlib"; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7865,30 +9357,30 @@ EOF
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
+		  a_deplib=
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    potlib=$potent_lib # see symlink-check above in file_magic test
 		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      func_append newdeplibs " $a_deplib"
-		      a_deplib=""
+		      a_deplib=
 		      break 2
 		    fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7896,7 +9388,7 @@ EOF
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
+		if test -z "$potlib"; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7912,18 +9404,18 @@ EOF
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
-	  newdeplibs=""
+	  newdeplibs=
 	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
 	    done
 	  fi
 	  case $tmp_deplibs in
 	  *[!\	\ ]*)
 	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
+	    if test none = "$deplibs_check_method"; then
 	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
 	      echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -7947,8 +9439,8 @@ EOF
 	  ;;
 	esac
 
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
 	    echo
 	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
@@ -7957,12 +9449,12 @@ EOF
 	    if test -z "$global_symbol_pipe"; then
 	      echo
 	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
 	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
 	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
@@ -7973,14 +9465,14 @@ EOF
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."
 
-	    if test "$allow_undefined" = no; then
+	    if test no = "$allow_undefined"; then
 	      echo
 	      echo "*** Since this library must not contain undefined symbols,"
 	      echo "*** because either the platform does not support them or"
 	      echo "*** it was explicitly requested with -no-undefined,"
 	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -8026,7 +9518,7 @@ EOF
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      deplibs="$new_libs"
+      deplibs=$new_libs
 
       # All the library-specific variables (install_libdir is set above).
       library_names=
@@ -8034,25 +9526,25 @@ EOF
       dlname=
 
       # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	# Remove ${wl} instances when linking with ld.
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
 	# FIXME: should test the right _cmds variable.
 	case $archive_cmds in
 	  *\$LD\ *) wl= ;;
         esac
-	if test "$hardcode_into_libs" = yes; then
+	if test yes = "$hardcode_into_libs"; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
 		func_replace_sysroot "$libdir"
 		libdir=$func_replace_sysroot_result
 		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
+		  hardcode_libdirs=$libdir
 		else
 		  # Just accumulate the unique libdirs.
 		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8077,7 +9569,7 @@ EOF
 	  # Substitute the hardcoded libdirs into the rpath.
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
+	    libdir=$hardcode_libdirs
 	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -8091,8 +9583,8 @@ EOF
 	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 	fi
 
-	shlibpath="$finalize_shlibpath"
-	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
@@ -8102,19 +9594,19 @@ EOF
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	shift
-	realname="$1"
+	realname=$1
 	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
-	  soname="$realname"
+	  soname=$realname
 	fi
 	if test -z "$dlname"; then
 	  dlname=$soname
 	fi
 
-	lib="$output_objdir/$realname"
+	lib=$output_objdir/$realname
 	linknames=
 	for link
 	do
@@ -8128,7 +9620,7 @@ EOF
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols="$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
 	  func_append delfiles " $export_symbols"
 	fi
 
@@ -8137,31 +9629,31 @@ EOF
 	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	    func_dll_def_p "$export_symbols" || {
 	      # and it's NOT already a .def file. Must figure out
 	      # which of the given symbols are data symbols and tag
 	      # them as such. So, trigger use of export_symbols_cmds.
 	      # export_symbols gets reassigned inside the "prepare
 	      # the list of exported symbols" if statement, so the
 	      # include_expsyms logic still works.
-	      orig_export_symbols="$export_symbols"
+	      orig_export_symbols=$export_symbols
 	      export_symbols=
 	      always_export_symbols=yes
-	    fi
+	    }
 	  fi
 	  ;;
 	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
 	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
+	    save_ifs=$IFS; IFS='~'
 	    for cmd1 in $cmds; do
-	      IFS="$save_ifs"
+	      IFS=$save_ifs
 	      # Take the normal branch if the nm_file_list_spec branch
 	      # doesn't work or if tool conversion is not needed.
 	      case $nm_file_list_spec~$to_tool_file_cmd in
@@ -8175,7 +9667,7 @@ EOF
 		  try_normal_branch=no
 		  ;;
 	      esac
-	      if test "$try_normal_branch" = yes \
+	      if test yes = "$try_normal_branch" \
 		 && { test "$len" -lt "$max_cmd_len" \
 		      || test "$max_cmd_len" -le -1; }
 	      then
@@ -8186,7 +9678,7 @@ EOF
 		output_la=$func_basename_result
 		save_libobjs=$libobjs
 		save_output=$output
-		output=${output_objdir}/${output_la}.nm
+		output=$output_objdir/$output_la.nm
 		func_to_tool_file "$output"
 		libobjs=$nm_file_list_spec$func_to_tool_file_result
 		func_append delfiles " $output"
@@ -8209,8 +9701,8 @@ EOF
 		break
 	      fi
 	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
@@ -8218,16 +9710,16 @@ EOF
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols="$export_symbols"
-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
 	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
 	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
 	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
 	  # though. Also, the filter scales superlinearly with the number of
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
@@ -8246,11 +9738,11 @@ EOF
 	    ;;
 	  esac
 	done
-	deplibs="$tmp_deplibs"
+	deplibs=$tmp_deplibs
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec" &&
-	    test "$compiler_needs_object" = yes &&
+	    test yes = "$compiler_needs_object" &&
 	    test -z "$libobjs"; then
 	    # extract the archives, so we have objects to list.
 	    # TODO: could optimize this to just extract one archive.
@@ -8261,7 +9753,7 @@ EOF
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	    test "X$libobjs" = "X " && libobjs=
 	  else
-	    gentop="$output_objdir/${outputname}x"
+	    gentop=$output_objdir/${outputname}x
 	    func_append generated " $gentop"
 
 	    func_extract_archives $gentop $convenience
@@ -8270,18 +9762,18 @@ EOF
 	  fi
 	fi
 
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  func_append linker_flags " $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
-	if test "$opt_mode" = relink; then
+	if test relink = "$opt_mode"; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
+	if test yes = "$module" && test -n "$module_cmds"; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	    eval test_cmds=\"$module_expsym_cmds\"
 	    cmds=$module_expsym_cmds
@@ -8299,7 +9791,7 @@ EOF
 	  fi
 	fi
 
-	if test "X$skipped_export" != "X:" &&
+	if test : != "$skipped_export" &&
 	   func_len " $test_cmds" &&
 	   len=$func_len_result &&
 	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -8332,8 +9824,8 @@ EOF
 	  last_robj=
 	  k=1
 
-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	    output=${output_objdir}/${output_la}.lnkscript
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
 	    func_verbose "creating GNU ld script: $output"
 	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
@@ -8345,14 +9837,14 @@ EOF
 	    func_append delfiles " $output"
 	    func_to_tool_file "$output"
 	    output=$func_to_tool_file_result
-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-	    output=${output_objdir}/${output_la}.lnk
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
 	    func_verbose "creating linker input file list: $output"
 	    : > $output
 	    set x $save_libobjs
 	    shift
 	    firstobj=
-	    if test "$compiler_needs_object" = yes; then
+	    if test yes = "$compiler_needs_object"; then
 	      firstobj="$1 "
 	      shift
 	    fi
@@ -8367,7 +9859,7 @@ EOF
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-${k}.$objext
+	      output=$output_objdir/$output_la-$k.$objext
 	      eval test_cmds=\"$reload_cmds\"
 	      func_len " $test_cmds"
 	      len0=$func_len_result
@@ -8379,13 +9871,13 @@ EOF
 		func_len " $obj"
 		func_arith $len + $func_len_result
 		len=$func_arith_result
-		if test "X$objlist" = X ||
+		if test -z "$objlist" ||
 		   test "$len" -lt "$max_cmd_len"; then
 		  func_append objlist " $obj"
 		else
 		  # The command $test_cmds is almost too long, add a
 		  # command to the queue.
-		  if test "$k" -eq 1 ; then
+		  if test 1 -eq "$k"; then
 		    # The first file doesn't have a previous command to add.
 		    reload_objs=$objlist
 		    eval concat_cmds=\"$reload_cmds\"
@@ -8395,10 +9887,10 @@ EOF
 		    reload_objs="$objlist $last_robj"
 		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
-		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  last_robj=$output_objdir/$output_la-$k.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
-		  output=$output_objdir/$output_la-${k}.$objext
+		  output=$output_objdir/$output_la-$k.$objext
 		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
@@ -8410,9 +9902,9 @@ EOF
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
 	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
 	      func_append delfiles " $output"
 
@@ -8420,9 +9912,9 @@ EOF
 	      output=
 	    fi
 
-	    if ${skipped_export-false}; then
-	      func_verbose "generating symbol list for \`$libname.la'"
-	      export_symbols="$output_objdir/$libname.exp"
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
 	      $opt_dry_run || $RM $export_symbols
 	      libobjs=$output
 	      # Append the command to create the export file.
@@ -8431,16 +9923,16 @@ EOF
 	      if test -n "$last_robj"; then
 		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	    fi
+	    }
 
 	    test -n "$save_libobjs" &&
 	      func_verbose "creating a temporary reloadable object file: $output"
 
 	    # Loop through the commands generated above and execute them.
-	    save_ifs="$IFS"; IFS='~'
+	    save_ifs=$IFS; IFS='~'
 	    for cmd in $concat_cmds; do
-	      IFS="$save_ifs"
-	      $opt_silent || {
+	      IFS=$save_ifs
+	      $opt_quiet || {
 		  func_quote_for_expand "$cmd"
 		  eval "func_echo $func_quote_for_expand_result"
 	      }
@@ -8448,7 +9940,7 @@ EOF
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
-		if test "$opt_mode" = relink; then
+		if test relink = "$opt_mode"; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
@@ -8457,7 +9949,7 @@ EOF
 		exit $lt_exit
 	      }
 	    done
-	    IFS="$save_ifs"
+	    IFS=$save_ifs
 
 	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -8465,18 +9957,18 @@ EOF
 	    fi
 	  fi
 
-          if ${skipped_export-false}; then
+          ${skipped_export-false} && {
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols="$export_symbols"
-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
 	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
 	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
 	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
 	      # though. Also, the filter scales superlinearly with the number of
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
@@ -8485,7 +9977,7 @@ EOF
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
-	  fi
+	  }
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -8499,7 +9991,7 @@ EOF
 	  # value of $libobjs for piecewise linking.
 
 	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test yes = "$module" && test -n "$module_cmds"; then
 	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	      cmds=$module_expsym_cmds
 	    else
@@ -8521,7 +10013,7 @@ EOF
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -8529,11 +10021,12 @@ EOF
 	  test "X$libobjs" = "X " && libobjs=
 	fi
 
-	save_ifs="$IFS"; IFS='~'
+	save_ifs=$IFS; IFS='~'
 	for cmd in $cmds; do
-	  IFS="$save_ifs"
+	  IFS=$sp$nl
 	  eval cmd=\"$cmd\"
-	  $opt_silent || {
+	  IFS=$save_ifs
+	  $opt_quiet || {
 	    func_quote_for_expand "$cmd"
 	    eval "func_echo $func_quote_for_expand_result"
 	  }
@@ -8541,7 +10034,7 @@ EOF
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
-	    if test "$opt_mode" = relink; then
+	    if test relink = "$opt_mode"; then
 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )
@@ -8550,10 +10043,10 @@ EOF
 	    exit $lt_exit
 	  }
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 
 	# Restore the uninstalled library and exit
-	if test "$opt_mode" = relink; then
+	if test relink = "$opt_mode"; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
@@ -8573,39 +10066,39 @@ EOF
 	done
 
 	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
+	if test yes = "$module" || test yes = "$export_dynamic"; then
 	  # On all known operating systems, these are identical.
-	  dlname="$soname"
+	  dlname=$soname
 	fi
       fi
       ;;
 
     obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for objects"
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+	func_warning "'-l' and '-L' are ignored for objects" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for objects"
+	func_warning "'-rpath' is ignored for objects"
 
       test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for objects"
+	func_warning "'-R' is ignored for objects"
 
       test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for objects"
+	func_warning "'-version-info' is ignored for objects"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for objects"
+	func_warning "'-release' is ignored for objects"
 
       case $output in
       *.lo)
 	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
 
 	libobj=$output
 	func_lo2o "$libobj"
@@ -8613,7 +10106,7 @@ EOF
 	;;
       *)
 	libobj=
-	obj="$output"
+	obj=$output
 	;;
       esac
 
@@ -8626,17 +10119,19 @@ EOF
       # the extraction.
       reload_conv_objs=
       gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
 	else
-	  gentop="$output_objdir/${obj}x"
+	  gentop=$output_objdir/${obj}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $convenience
@@ -8645,12 +10140,12 @@ EOF
       fi
 
       # If we're not building shared, we need to use non_pic_objs
-      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
 
-      output="$obj"
+      output=$obj
       func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
@@ -8662,7 +10157,7 @@ EOF
 	exit $EXIT_SUCCESS
       fi
 
-      if test "$build_libtool_libs" != yes; then
+      test yes = "$build_libtool_libs" || {
 	if test -n "$gentop"; then
 	  func_show_eval '${RM}r "$gentop"'
 	fi
@@ -8672,12 +10167,12 @@ EOF
 	# $show "echo timestamp > $libobj"
 	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
-      fi
+      }
 
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
+	output=$libobj
 	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
@@ -8694,16 +10189,14 @@ EOF
 	          output=$func_stripname_result.exe;;
       esac
       test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for programs"
+	func_warning "'-version-info' is ignored for programs"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for programs"
+	func_warning "'-release' is ignored for programs"
 
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-	&& test "$dlopen_self" = unknown \
-	&& test "$dlopen_self_static" = unknown && \
-	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
@@ -8717,11 +10210,11 @@ EOF
       *-*-darwin*)
 	# Don't allow lazy linking, it breaks C++ global constructors
 	# But is supposedly fixed on 10.4 or later (yay!).
-	if test "$tagname" = CXX ; then
+	if test CXX = "$tagname"; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.[0123])
-	      func_append compile_command " ${wl}-bind_at_load"
-	      func_append finalize_command " ${wl}-bind_at_load"
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
 	    ;;
 	  esac
 	fi
@@ -8757,7 +10250,7 @@ EOF
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      compile_deplibs="$new_libs"
+      compile_deplibs=$new_libs
 
 
       func_append compile_command " $compile_deplibs"
@@ -8781,7 +10274,7 @@ EOF
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
+	      hardcode_libdirs=$libdir
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8804,7 +10297,7 @@ EOF
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  ::) dllsearchpath=$libdir;;
@@ -8821,10 +10314,10 @@ EOF
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
+	libdir=$hardcode_libdirs
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      compile_rpath="$rpath"
+      compile_rpath=$rpath
 
       rpath=
       hardcode_libdirs=
@@ -8832,7 +10325,7 @@ EOF
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
+	      hardcode_libdirs=$libdir
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8857,45 +10350,43 @@ EOF
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
+	libdir=$hardcode_libdirs
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      finalize_rpath="$rpath"
+      finalize_rpath=$rpath
 
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
 	# Transform all the library objects into standard objects.
 	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
 
       # template prelinking step
       if test -n "$prelink_cmds"; then
 	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      wrappers_required=yes
+      wrappers_required=:
       case $host in
       *cegcc* | *mingw32ce*)
         # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
+        wrappers_required=false
         ;;
       *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
+        test yes = "$build_libtool_libs" || wrappers_required=false
         ;;
       *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
         fi
         ;;
       esac
-      if test "$wrappers_required" = no; then
+      $wrappers_required || {
 	# Replace the output file specification.
 	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
+	link_command=$compile_command$compile_rpath
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	exit_status=0
@@ -8908,12 +10399,12 @@ EOF
 	fi
 
 	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.${objext}"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
 	fi
 
 	exit $exit_status
-      fi
+      }
 
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -8943,9 +10434,9 @@ EOF
 	fi
       fi
 
-      if test "$no_install" = yes; then
+      if test yes = "$no_install"; then
 	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
+	link_command=$compile_var$compile_command$compile_rpath
 	# Replace the output file specification.
 	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
@@ -8962,27 +10453,28 @@ EOF
 	exit $EXIT_SUCCESS
       fi
 
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
 
-	func_warning "this platform does not like uninstalled shared libraries"
-	func_warning "\`$output' will be relinked during installation"
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
 
       # Replace the output file specification.
       link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -9039,8 +10531,8 @@ EOF
 	    func_dirname_and_basename "$output" "" "."
 	    output_name=$func_basename_result
 	    output_path=$func_dirname_result
-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-	    cwrapper="$output_path/$output_name.exe"
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
 	    $RM $cwrappersource $cwrapper
 	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
@@ -9061,7 +10553,7 @@ EOF
 	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
 	    $opt_dry_run || {
 	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host" ; then
+	      if test "x$build" = "x$host"; then
 		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
 	      else
 		func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -9084,25 +10576,27 @@ EOF
     # See if we need to build an old-fashioned archive.
     for oldlib in $oldlibs; do
 
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save $symfileobj"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
 	  build_libtool_libs=no
-	else
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
 	  oldobjs="$old_deplibs $non_pic_objects"
-	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    func_append oldobjs " $symfileobj"
-	  fi
-	fi
-	addlibs="$old_convenience"
-      fi
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
 
       if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
+	gentop=$output_objdir/${outputname}x
 	func_append generated " $gentop"
 
 	func_extract_archives $gentop $addlibs
@@ -9110,13 +10604,13 @@ EOF
       fi
 
       # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
 	cmds=$old_archive_from_new_cmds
       else
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -9137,7 +10631,7 @@ EOF
 	  :
 	else
 	  echo "copying selected object files to avoid basename conflicts..."
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
@@ -9146,7 +10640,7 @@ EOF
 	  for obj in $save_oldobjs
 	  do
 	    func_basename "$obj"
-	    objbase="$func_basename_result"
+	    objbase=$func_basename_result
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
@@ -9215,18 +10709,18 @@ EOF
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
+	      if test "$obj" = "$last_oldobj"; then
 		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
 	      objlist=
 	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
 	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
+	  if test -z "$oldobjs"; then
 	    eval cmds=\"\$concat_cmds\"
 	  else
 	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -9243,7 +10737,7 @@ EOF
     case $output in
     *.la)
       old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      test yes = "$build_old_libs" && old_library=$libname.$libext
       func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
@@ -9258,31 +10752,31 @@ EOF
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
       relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
+      if test yes = "$hardcode_automatic"; then
 	relink_command=
       fi
 
       # Only create the output if not a dry run.
       $opt_dry_run || {
 	for installed in no yes; do
-	  if test "$installed" = yes; then
+	  if test yes = "$installed"; then
 	    if test -z "$install_libdir"; then
 	      break
 	    fi
-	    output="$output_objdir/$outputname"i
+	    output=$output_objdir/${outputname}i
 	    # Replace all uninstalled libtool libraries with the installed ones
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
 		func_basename "$deplib"
-		name="$func_basename_result"
+		name=$func_basename_result
 		func_resolve_sysroot "$deplib"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
 		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      -L*)
@@ -9298,23 +10792,23 @@ EOF
 	      *) func_append newdependency_libs " $deplib" ;;
 	      esac
 	    done
-	    dependency_libs="$newdependency_libs"
+	    dependency_libs=$newdependency_libs
 	    newdlfiles=
 
 	    for lib in $dlfiles; do
 	      case $lib in
 	      *.la)
 	        func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		  func_fatal_error "'$lib' is not a valid libtool archive"
 		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      *) func_append newdlfiles " $lib" ;;
 	      esac
 	    done
-	    dlfiles="$newdlfiles"
+	    dlfiles=$newdlfiles
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
@@ -9324,34 +10818,34 @@ EOF
 		# didn't already link the preopened objects directly into
 		# the library:
 		func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		  func_fatal_error "'$lib' is not a valid libtool archive"
 		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      esac
 	    done
-	    dlprefiles="$newdlprefiles"
+	    dlprefiles=$newdlprefiles
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlfiles " $abs"
 	    done
-	    dlfiles="$newdlfiles"
+	    dlfiles=$newdlfiles
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlprefiles " $abs"
 	    done
-	    dlprefiles="$newdlprefiles"
+	    dlprefiles=$newdlprefiles
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
@@ -9367,10 +10861,9 @@ EOF
 	  case $host,$output,$installed,$module,$dlname in
 	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
 	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
+	      if test -n "$bindir"; then
 		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
+		tdlname=$func_relative_path_result/$dlname
 	      else
 		# Otherwise fall back on heuristic.
 		tdlname=../bin/$dlname
@@ -9379,7 +10872,7 @@ EOF
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -9393,7 +10886,7 @@ library_names='$library_names'
 # The name of the static archive.
 old_library='$old_library'
 
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
 inherited_linker_flags='$new_inherited_linker_flags'
 
 # Libraries that this one depends upon.
@@ -9419,7 +10912,7 @@ dlpreopen='$dlprefiles'
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
+	  if test no,yes = "$installed,$need_relink"; then
 	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
@@ -9434,27 +10927,29 @@ relink_command=\"$relink_command\""
     exit $EXIT_SUCCESS
 }
 
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
-    func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
 
 
 # func_mode_uninstall arg...
 func_mode_uninstall ()
 {
-    $opt_debug
-    RM="$nonopt"
+    $debug_cmd
+
+    RM=$nonopt
     files=
-    rmforce=
+    rmforce=false
     exit_status=0
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic="$magic"
+    libtool_install_magic=$magic
 
     for arg
     do
       case $arg in
-      -f) func_append RM " $arg"; rmforce=yes ;;
+      -f) func_append RM " $arg"; rmforce=: ;;
       -*) func_append RM " $arg" ;;
       *) func_append files " $arg" ;;
       esac
@@ -9467,18 +10962,18 @@ func_mode_uninstall ()
 
     for file in $files; do
       func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-	odir="$objdir"
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
       else
-	odir="$dir/$objdir"
+	odir=$dir/$objdir
       fi
       func_basename "$file"
-      name="$func_basename_result"
-      test "$opt_mode" = uninstall && odir="$dir"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
 
       # Remember odir for removal later, being careful to avoid duplicates
-      if test "$opt_mode" = clean; then
+      if test clean = "$opt_mode"; then
 	case " $rmdirs " in
 	  *" $odir "*) ;;
 	  *) func_append rmdirs " $odir" ;;
@@ -9493,11 +10988,11 @@ func_mode_uninstall ()
       elif test -d "$file"; then
 	exit_status=1
 	continue
-      elif test "$rmforce" = yes; then
+      elif $rmforce; then
 	continue
       fi
 
-      rmfiles="$file"
+      rmfiles=$file
 
       case $name in
       *.la)
@@ -9511,7 +11006,7 @@ func_mode_uninstall ()
 	  done
 	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
 
-	  case "$opt_mode" in
+	  case $opt_mode in
 	  clean)
 	    case " $library_names " in
 	    *" $dlname "*) ;;
@@ -9522,12 +11017,12 @@ func_mode_uninstall ()
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -9543,21 +11038,19 @@ func_mode_uninstall ()
 	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" &&
-	     test "$pic_object" != none; then
+	  if test -n "$pic_object" && test none != "$pic_object"; then
 	    func_append rmfiles " $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" &&
-	     test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
 	    func_append rmfiles " $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
-	if test "$opt_mode" = clean ; then
+	if test clean = "$opt_mode"; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
@@ -9584,12 +11077,12 @@ func_mode_uninstall ()
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
-	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
 	      func_append rmfiles " $odir/lt-$name"
 	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
 	    fi
 	  fi
 	fi
@@ -9598,7 +11091,7 @@ func_mode_uninstall ()
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
 
-    # Try to remove the ${objdir}s in the directories where we deleted files
+    # Try to remove the $objdir's in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
 	func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -9608,16 +11101,17 @@ func_mode_uninstall ()
     exit $exit_status
 }
 
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
 
 test -z "$opt_mode" && {
-  help="$generic_help"
+  help=$generic_help
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$opt_mode'"
+  func_fatal_help "invalid operation mode '$opt_mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
@@ -9628,7 +11122,7 @@ exit $exit_status
 
 
 # The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
+# where we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,
 # since we can't tell whether shared libraries were disabled because
 # the user asked for that or because the platform doesn't support
@@ -9651,5 +11145,3 @@ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # mode:shell-script
 # sh-indentation:2
 # End:
-# vi:sw=2
-