Imported Upstream version 2.3_rc1

1 files changed, 244 insertions, 0 deletions

diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel
new file mode 100755
index 0000000..821abd5
--- /dev/null
+++ b/distro/rpm/openvpn.init.d.rhel
@@ -0,0 +1,244 @@
+#!/bin/sh
+#
+# openvpn       This shell script takes care of starting and stopping
+#               openvpn on RedHat or other chkconfig-based system.
+#
+# chkconfig: 345 24 76
+#
+# description: OpenVPN is a robust and highly flexible tunneling application \
+#              that uses all of the encryption, authentication, and \
+#              certification features of the OpenSSL library to securely \
+#              tunnel IP networks over a single UDP port.
+#
+
+# Contributed to the OpenVPN project by
+# Douglas Keller <doug@voidstar.dyndns.org>
+# 2002.05.15
+
+# To install:
+#   copy this file to /etc/rc.d/init.d/openvpn
+#   shell> chkconfig --add openvpn
+#   shell> mkdir /etc/openvpn
+#   make .conf or .sh files in /etc/openvpn (see below)
+
+# To uninstall:
+#   run: chkconfig --del openvpn
+
+# Author's Notes:
+#
+# I have created an /etc/init.d init script and enhanced openvpn.spec to
+# automatically register the init script.  Once the RPM is installed you
+# can start and stop OpenVPN with "service openvpn start" and "service
+# openvpn stop".
+#
+# The init script does the following:
+#
+# - Starts an openvpn process for each .conf file it finds in
+#   /etc/openvpn.
+#
+# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
+#   it before starting openvpn (useful for doing openvpn --mktun...).
+#
+# - In addition to start/stop you can do:
+#
+#   service openvpn reload - SIGHUP
+#   service openvpn reopen - SIGUSR1
+#   service openvpn status - SIGUSR2
+#
+# Modifications:
+#
+# 2003.05.02
+#   * Changed == to = for sh compliance (Bishop Clark).
+#   * If condrestart|reload|reopen|status, check that we were
+#     actually started (James Yonan).
+#   * Added lock, piddir, and work variables (James Yonan).
+#   * If start is attempted twice, without an intervening stop, or
+#     if start is attempted when previous start was not properly
+#     shut down, then kill any previously started processes, before
+#     commencing new start operation (James Yonan).
+#   * Do a better job of flagging errors on start, and properly
+#     returning success or failure status to caller (James Yonan).
+#
+# 2005.04.04
+#   * Added openvpn-startup and openvpn-shutdown script calls
+#     (James Yonan).
+#
+
+# Location of openvpn binary
+openvpn=""
+openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
+for location in $openvpn_locations
+do
+  if [ -f "$location" ]
+  then
+    openvpn=$location
+  fi
+done
+
+# Lockfile
+lock="/var/lock/subsys/openvpn"
+
+# PID directory
+piddir="/var/run/openvpn"
+
+# Our working directory
+work=/etc/openvpn
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+if [ ${NETWORKING} = "no" ]
+then
+  echo "Networking is down"
+  exit 0
+fi
+
+# Check that binary exists
+if ! [ -f  $openvpn ] 
+then
+  echo "openvpn binary not found"
+  exit 0
+fi
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n $"Starting openvpn: "
+
+	/sbin/modprobe tun >/dev/null 2>&1
+
+	# From a security perspective, I think it makes
+	# sense to remove this, and have users who need
+	# it explictly enable in their --up scripts or
+	# firewall setups.
+
+	#echo 1 > /proc/sys/net/ipv4/ip_forward
+
+	# Run startup script, if defined
+	if [ -f $work/openvpn-startup ]; then
+	    $work/openvpn-startup
+	fi
+
+	if [ ! -d  $piddir ]; then
+	    mkdir $piddir
+	fi
+
+	if [ -f $lock ]; then
+	    # we were not shut down correctly
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	      if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+	      fi
+	      rm -f $pidf
+	    done
+	    rm -f $lock
+	    sleep 2
+	fi
+
+	rm -f $piddir/*.pid
+	cd $work
+
+	# Start every .conf in $work and run .sh if exists
+	errors=0
+	successes=0
+	for c in `/bin/ls *.conf 2>/dev/null`; do
+	    bn=${c%%.conf}
+	    if [ -f "$bn.sh" ]; then
+		. $bn.sh
+	    fi
+	    rm -f $piddir/$bn.pid
+	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
+	    if [ $? = 0 ]; then
+		successes=1
+	    else
+		errors=1
+	    fi
+	done
+
+	if [ $errors = 1 ]; then
+	    failure; echo
+	else
+	    success; echo
+	fi
+
+	if [ $successes = 1 ]; then
+	    touch $lock
+	fi
+	;;
+  stop)
+	echo -n $"Shutting down openvpn: "
+	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	  if [ -s $pidf ]; then
+	    kill `cat $pidf` >/dev/null 2>&1
+	  fi
+	  rm -f $pidf
+	done
+
+	# Run shutdown script, if defined
+	if [ -f $work/openvpn-shutdown ]; then
+	    $work/openvpn-shutdown
+	fi
+
+	success; echo
+	rm -f $lock
+	;;
+  restart)
+	$0 stop
+	sleep 2
+	$0 start
+	;;
+  reload)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -HUP `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+	;;
+  reopen)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR1 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+	;;
+  condrestart)
+	if [ -f $lock ]; then
+	    $0 stop
+	    # avoid race
+	    sleep 2
+	    $0 start
+	fi
+	;;
+  status)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR2 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	    echo "Status written to /var/log/messages"
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+        ;;
+  *)
+	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
+	exit 1
+	;;
+esac
+exit 0