Update upstream source from tag 'upstream/2.4.8'

Update to upstream version '2.4.8'
with Debian dir 00c9c7e7fdd8b0a1729f9102507c151f67ca8c5d

1 files changed, 0 insertions, 244 deletions

diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel
deleted file mode 100755
index bfde221..0000000
--- a/distro/rpm/openvpn.init.d.rhel
+++ /dev/null
@@ -1,244 +0,0 @@
-#!/bin/sh
-#
-# openvpn       This shell script takes care of starting and stopping
-#               openvpn on RedHat or other chkconfig-based system.
-#
-# chkconfig: 345 24 76
-#
-# description: OpenVPN is a robust and highly flexible tunneling application \
-#              that uses all of the encryption, authentication, and \
-#              certification features of the OpenSSL library to securely \
-#              tunnel IP networks over a single UDP port.
-#
-
-# Contributed to the OpenVPN project by
-# Douglas Keller <doug@voidstar.dyndns.org>
-# 2002.05.15
-
-# To install:
-#   copy this file to /etc/rc.d/init.d/openvpn
-#   shell> chkconfig --add openvpn
-#   shell> mkdir /etc/openvpn
-#   make .conf or .sh files in /etc/openvpn (see below)
-
-# To uninstall:
-#   run: chkconfig --del openvpn
-
-# Author's Notes:
-#
-# I have created an /etc/init.d init script and enhanced openvpn.spec to
-# automatically register the init script.  Once the RPM is installed you
-# can start and stop OpenVPN with "service openvpn start" and "service
-# openvpn stop".
-#
-# The init script does the following:
-#
-# - Starts an openvpn process for each .conf file it finds in
-#   /etc/openvpn.
-#
-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
-#   it before starting openvpn (useful for doing openvpn --mktun...).
-#
-# - In addition to start/stop you can do:
-#
-#   service openvpn reload - SIGHUP
-#   service openvpn reopen - SIGUSR1
-#   service openvpn status - SIGUSR2
-#
-# Modifications:
-#
-# 2003.05.02
-#   * Changed == to = for sh compliance (Bishop Clark).
-#   * If condrestart|reload|reopen|status, check that we were
-#     actually started (James Yonan).
-#   * Added lock, piddir, and work variables (James Yonan).
-#   * If start is attempted twice, without an intervening stop, or
-#     if start is attempted when previous start was not properly
-#     shut down, then kill any previously started processes, before
-#     commencing new start operation (James Yonan).
-#   * Do a better job of flagging errors on start, and properly
-#     returning success or failure status to caller (James Yonan).
-#
-# 2005.04.04
-#   * Added openvpn-startup and openvpn-shutdown script calls
-#     (James Yonan).
-#
-
-# Location of openvpn binary
-openvpn=""
-openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
-for location in $openvpn_locations
-do
-  if [ -f "$location" ]
-  then
-    openvpn=$location
-  fi
-done
-
-# Lockfile
-lock="/var/lock/subsys/openvpn"
-
-# PID directory
-piddir="/var/run/openvpn"
-
-# Our working directory
-work=/etc/openvpn
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-if [ "${NETWORKING}" = "no" ]
-then
-  echo "Networking is down"
-  exit 0
-fi
-
-# Check that binary exists
-if ! [ -f  $openvpn ] 
-then
-  echo "openvpn binary not found"
-  exit 0
-fi
-
-# See how we were called.
-case "$1" in
-  start)
-	echo -n $"Starting openvpn: "
-
-	/sbin/modprobe tun >/dev/null 2>&1
-
-	# From a security perspective, I think it makes
-	# sense to remove this, and have users who need
-	# it explictly enable in their --up scripts or
-	# firewall setups.
-
-	#echo 1 > /proc/sys/net/ipv4/ip_forward
-
-	# Run startup script, if defined
-	if [ -f $work/openvpn-startup ]; then
-	    $work/openvpn-startup
-	fi
-
-	if [ ! -d  $piddir ]; then
-	    mkdir $piddir
-	fi
-
-	if [ -f $lock ]; then
-	    # we were not shut down correctly
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	      if [ -s $pidf ]; then
-		kill `cat $pidf` >/dev/null 2>&1
-	      fi
-	      rm -f $pidf
-	    done
-	    rm -f $lock
-	    sleep 2
-	fi
-
-	rm -f $piddir/*.pid
-	cd $work
-
-	# Start every .conf in $work and run .sh if exists
-	errors=0
-	successes=0
-	for c in `/bin/ls *.conf 2>/dev/null`; do
-	    bn=${c%%.conf}
-	    if [ -f "$bn.sh" ]; then
-		. ./$bn.sh
-	    fi
-	    rm -f $piddir/$bn.pid
-	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
-	    if [ $? = 0 ]; then
-		successes=1
-	    else
-		errors=1
-	    fi
-	done
-
-	if [ $errors = 1 ]; then
-	    failure; echo
-	else
-	    success; echo
-	fi
-
-	if [ $successes = 1 ]; then
-	    touch $lock
-	fi
-	;;
-  stop)
-	echo -n $"Shutting down openvpn: "
-	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	  if [ -s $pidf ]; then
-	    kill `cat $pidf` >/dev/null 2>&1
-	  fi
-	  rm -f $pidf
-	done
-
-	# Run shutdown script, if defined
-	if [ -f $work/openvpn-shutdown ]; then
-	    $work/openvpn-shutdown
-	fi
-
-	success; echo
-	rm -f $lock
-	;;
-  restart)
-	$0 stop
-	sleep 2
-	$0 start
-	;;
-  reload)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -HUP `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-	;;
-  reopen)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR1 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-	;;
-  condrestart)
-	if [ -f $lock ]; then
-	    $0 stop
-	    # avoid race
-	    sleep 2
-	    $0 start
-	fi
-	;;
-  status)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR2 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	    echo "Status written to /var/log/messages"
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-        ;;
-  *)
-	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
-	exit 1
-	;;
-esac
-exit 0