Update upstream source from tag 'upstream/2.4.8'

Update to upstream version '2.4.8'
with Debian dir 00c9c7e7fdd8b0a1729f9102507c151f67ca8c5d

1 files changed, 0 insertions, 264 deletions

diff --git a/distro/rpm/openvpn.init.d.suse b/distro/rpm/openvpn.init.d.suse
deleted file mode 100644
index 270024e..0000000
--- a/distro/rpm/openvpn.init.d.suse
+++ /dev/null
@@ -1,264 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:                     openvpn
-# Required-Start:               $network
-# Required-Stop:                $network
-# Default-Start:                3 5
-# Default-Stop:                 0 1 2 6
-# Short-Description:            This shell script takes care of starting and stopping OpenVPN.
-# Description:                  OpenVPN is a robust and highly flexible tunneling application that uses all of the encryption, authentication, and certification features of the OpenSSL library to securely tunnel IP networks over a single UDP port. 
-### END INIT INFO
-
-# Contributed to the OpenVPN project by
-# Douglas Keller <doug@voidstar.dyndns.org>
-# 2002.05.15
-
-# Modified for SuSE by
-# Frank Plohmann <openvpn@franks-planet.de>
-# 2003.08.24
-# Please feel free to contact me if you have problems or suggestions
-# using this script.
-
-# To install:
-#   copy this file to /etc/rc.d/init.d/openvpn
-#   use the runlevel editor in Yast to add it to runlevel 3 and/or 5
-#   shell> mkdir /etc/openvpn
-#   make .conf or .sh files in /etc/openvpn (see below)
-
-# To uninstall:
-#   use also Yast and the runlevel editor to uninstall
-
-# Author's Notes:
-#
-# I have created an /etc/init.d init script and enhanced openvpn.spec to
-# automatically register the init script.  Once the RPM is installed you
-# can start and stop OpenVPN with "service openvpn start" and "service
-# openvpn stop".
-#
-# The init script does the following:
-#
-# - Starts an openvpn process for each .conf file it finds in
-#   /etc/openvpn.
-#
-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
-#   it before starting openvpn (useful for doing openvpn --mktun...).
-#
-# - In addition to start/stop you can do:
-#
-#   /etc/init.d/openvpn reload - SIGHUP
-#   /etc/init.d/openvpn reopen - SIGUSR1
-#   /etc/init.d/openvpn status - SIGUSR2
-
-# Modifications 2003.05.02
-#   * Changed == to = for sh compliance (Bishop Clark).
-#   * If condrestart|reload|reopen|status, check that we were
-#     actually started (James Yonan).
-#   * Added lock, piddir, and work variables (James Yonan).
-#   * If start is attempted twice, without an intervening stop, or
-#     if start is attempted when previous start was not properly
-#     shut down, then kill any previously started processes, before
-#     commencing new start operation (James Yonan).
-#   * Do a better job of flagging errors on start, and properly
-#     returning success or failure status to caller (James Yonan).
-#
-# Modifications 2003.08.24
-#   * Converted the script for SuSE Linux distribution. 
-#	  Tested with version 8.2 (Frank Plohmann).
-#		- removed "chkconfig" header
-#		- added Yast header
-#		- changed installation notes
-#		- corrected path to openvpn binary
-#		- removes sourcing "functions"
-#		- removed sourcing "network"
-#		- removed network checking. it seemed not to work with SuSE.
-#		- added sourcing "rc.status", comments and "rc_reset" command
-#		- removed "succes; echo" and "failure; echo" lines
-#		- added "rc_status" lines at the end of each section
-#		- changed "service" to "/etc/init.d/" in "In addition to start/stop"
-#		  section above.
-#
-# Modifications 2005.04.04
-#   * Added openvpn-startup and openvpn-shutdown script calls (James Yonan).
-#
-
-# Location of openvpn binary
-openvpn="/usr/sbin/openvpn"
-
-# Lockfile
-lock="/var/lock/subsys/openvpn"
-
-# PID directory
-piddir="/var/run/openvpn"
-
-# Our working directory
-work=/etc/openvpn
-
-# Source rc functions
-. /etc/rc.status
-
-# Shell functions sourced from /etc/rc.status:
-#      rc_check         check and set local and overall rc status
-#      rc_status        check and set local and overall rc status
-#      rc_status -v     ditto but be verbose in local rc status
-#      rc_status -v -r  ditto and clear the local rc status
-#      rc_failed        set local and overall rc status to failed
-#      rc_reset         clear local rc status (overall remains)
-#      rc_exit          exit appropriate to overall rc status
-
-#      rc_status        check and set local and overall rc status
-#      rc_status -v     ditto but be verbose in local rc status
-#      rc_status -v -r  ditto and clear the local rc status
-#      rc_failed        set local and overall rc status to failed
-#      rc_reset         clear local rc status (overall remains)
-#      rc_exit          exit appropriate to overall rc status
-
-# First reset status of this service
-rc_reset
-
-[ -f  $openvpn ] || exit 0
-
-# See how we were called.
-case "$1" in
-  start)
-	echo -n $"Starting openvpn: "
-
-	/sbin/modprobe tun >/dev/null 2>&1
-
-	# From a security perspective, I think it makes
-	# sense to remove this, and have users who need
-	# it explictly enable in their --up scripts or
-	# firewall setups.
-
-	#echo 1 > /proc/sys/net/ipv4/ip_forward
-
-	# Run startup script, if defined
-	if [ -f $work/openvpn-startup ]; then
-	    $work/openvpn-startup
-	fi
-
-	if [ ! -d  $piddir ]; then
-	    mkdir $piddir
-	fi
-
-	if [ -f $lock ]; then
-	    # we were not shut down correctly
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	      if [ -s $pidf ]; then
-		kill `cat $pidf` >/dev/null 2>&1
-	      fi
-	      rm -f $pidf
-	    done
-	    rm -f $lock
-	    sleep 2
-	fi
-
-	rm -f $piddir/*.pid
-	cd $work
-
-	# Start every .conf in $work and run .sh if exists
-	errors=0
-	successes=0
-	for c in `/bin/ls *.conf 2>/dev/null`; do
-	    bn=${c%%.conf}
-	    if [ -f "$bn.sh" ]; then
-		. ./$bn.sh
-	    fi
-	    rm -f $piddir/$bn.pid
-	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
-	    if [ $? = 0 ]; then
-		successes=1
-	    else
-		errors=1
-	    fi
-	done
-
-	if [ $successes = 1 ]; then
-	    touch $lock
-	fi
-
-	rc_status -v
-	;;
-  stop)
-	echo -n $"Shutting down openvpn: "
-	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	  if [ -s $pidf ]; then
-	    kill `cat $pidf` >/dev/null 2>&1
-	  fi
-	  rm -f $pidf
-	done
-
-	# Run shutdown script, if defined
-	if [ -f $work/openvpn-shutdown ]; then
-	    $work/openvpn-shutdown
-	fi
-
-	rm -f $lock
-
-	rc_status -v
-	;;
-  restart)
-	$0 stop
-	sleep 2
-	$0 start
-
-	rc_status
-	;;
-  reload)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -HUP `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-
-	rc_status -v
-	;;
-  reopen)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR1 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-
-	rc_status -v
-	;;
-  condrestart)
-	if [ -f $lock ]; then
-	    $0 stop
-	    # avoid race
-	    sleep 2
-	    $0 start
-	fi
-
-	rc_status
-	;;
-  status)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR2 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	    echo "Status written to /var/log/messages"
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-
-	rc_status -v
-        ;;
-  *)
-	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
-	exit 1
-esac
-
-exit 0