Update upstream source from tag 'upstream/2.4.8'

Update to upstream version '2.4.8'
with Debian dir 00c9c7e7fdd8b0a1729f9102507c151f67ca8c5d

9 files changed, 2 insertions, 1560 deletions

diff --git a/distro/Makefile.am b/distro/Makefile.am
index e2098c8..a6795c4 100644
--- a/distro/Makefile.am
+++ b/distro/Makefile.am
@@ -12,4 +12,4 @@
 MAINTAINERCLEANFILES = \
 	$(srcdir)/Makefile.in
 
-SUBDIRS = rpm systemd
+SUBDIRS = systemd
diff --git a/distro/Makefile.in b/distro/Makefile.in
index 2c01315..d15717f 100644
--- a/distro/Makefile.in
+++ b/distro/Makefile.in
@@ -314,9 +314,6 @@ TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
 TEST_CFLAGS = @TEST_CFLAGS@
 TEST_LDFLAGS = @TEST_LDFLAGS@
 TMPFILES_DIR = @TMPFILES_DIR@
-VENDOR_BUILD_ROOT = @VENDOR_BUILD_ROOT@
-VENDOR_DIST_ROOT = @VENDOR_DIST_ROOT@
-VENDOR_SRC_ROOT = @VENDOR_SRC_ROOT@
 VERSION = @VERSION@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
@@ -379,7 +376,7 @@ top_srcdir = @top_srcdir@
 MAINTAINERCLEANFILES = \
 	$(srcdir)/Makefile.in
 
-SUBDIRS = rpm systemd
+SUBDIRS = systemd
 all: all-recursive
 
 .SUFFIXES:
diff --git a/distro/rpm/Makefile.am b/distro/rpm/Makefile.am
deleted file mode 100644
index d16a5ac..0000000
--- a/distro/rpm/Makefile.am
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-#  OpenVPN -- An application to securely tunnel IP networks
-#             over a single UDP port, with support for SSL/TLS-based
-#             session authentication and key exchange,
-#             packet encryption, packet authentication, and
-#             packet compression.
-#
-#  Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net>
-#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
-#
-
-MAINTAINERCLEANFILES = \
-	$(srcdir)/Makefile.in
-
-dist_noinst_DATA = \
-	openvpn.spec \
-	openvpn.init.d.rhel \
-	openvpn.init.d.suse
diff --git a/distro/rpm/Makefile.in b/distro/rpm/Makefile.in
deleted file mode 100644
index 9a71d31..0000000
--- a/distro/rpm/Makefile.in
+++ /dev/null
@@ -1,530 +0,0 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-#  OpenVPN -- An application to securely tunnel IP networks
-#             over a single UDP port, with support for SSL/TLS-based
-#             session authentication and key exchange,
-#             packet encryption, packet authentication, and
-#             packet compression.
-#
-#  Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net>
-#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = distro/rpm
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \
-	$(top_srcdir)/m4/ax_socklen_t.m4 \
-	$(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \
-	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
-	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
-	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \
-	$(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(dist_noinst_DATA) \
-	$(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h \
-	$(top_builddir)/include/openvpn-plugin.h
-CONFIG_CLEAN_FILES = openvpn.spec
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-DATA = $(dist_noinst_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/openvpn.spec.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CMAKE = @CMAKE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GIT = @GIT@
-GREP = @GREP@
-IFCONFIG = @IFCONFIG@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPROUTE = @IPROUTE@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBPAM_CFLAGS = @LIBPAM_CFLAGS@
-LIBPAM_LIBS = @LIBPAM_LIBS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-LZ4_CFLAGS = @LZ4_CFLAGS@
-LZ4_LIBS = @LZ4_LIBS@
-LZO_CFLAGS = @LZO_CFLAGS@
-LZO_LIBS = @LZO_LIBS@
-MAKEINFO = @MAKEINFO@
-MAN2HTML = @MAN2HTML@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MBEDTLS_CFLAGS = @MBEDTLS_CFLAGS@
-MBEDTLS_LIBS = @MBEDTLS_LIBS@
-MKDIR_P = @MKDIR_P@
-NETSTAT = @NETSTAT@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OPENVPN_VERSION_MAJOR = @OPENVPN_VERSION_MAJOR@
-OPENVPN_VERSION_MINOR = @OPENVPN_VERSION_MINOR@
-OPENVPN_VERSION_PATCH = @OPENVPN_VERSION_PATCH@
-OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@
-OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@
-OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@
-OPTIONAL_LZ4_CFLAGS = @OPTIONAL_LZ4_CFLAGS@
-OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@
-OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@
-OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@
-OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@
-OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@
-OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@
-OPTIONAL_SYSTEMD_LIBS = @OPTIONAL_SYSTEMD_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-P11KIT_CFLAGS = @P11KIT_CFLAGS@
-P11KIT_LIBS = @P11KIT_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@
-PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PLUGINDIR = @PLUGINDIR@
-PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@
-PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@
-RANLIB = @RANLIB@
-RC = @RC@
-ROUTE = @ROUTE@
-SED = @SED@
-SELINUX_LIBS = @SELINUX_LIBS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SOCKETS_LIBS = @SOCKETS_LIBS@
-STRIP = @STRIP@
-SYSTEMD_ASK_PASSWORD = @SYSTEMD_ASK_PASSWORD@
-SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@
-TAP_CFLAGS = @TAP_CFLAGS@
-TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@
-TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@
-TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
-TEST_CFLAGS = @TEST_CFLAGS@
-TEST_LDFLAGS = @TEST_LDFLAGS@
-TMPFILES_DIR = @TMPFILES_DIR@
-VENDOR_BUILD_ROOT = @VENDOR_BUILD_ROOT@
-VENDOR_DIST_ROOT = @VENDOR_DIST_ROOT@
-VENDOR_SRC_ROOT = @VENDOR_SRC_ROOT@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-libsystemd_CFLAGS = @libsystemd_CFLAGS@
-libsystemd_LIBS = @libsystemd_LIBS@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-plugindir = @plugindir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sampledir = @sampledir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdunitdir = @systemdunitdir@
-target_alias = @target_alias@
-tmpfilesdir = @tmpfilesdir@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = \
-	$(srcdir)/Makefile.in
-
-dist_noinst_DATA = \
-	openvpn.spec \
-	openvpn.init.d.rhel \
-	openvpn.init.d.suse
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign distro/rpm/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign distro/rpm/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-openvpn.spec: $(top_builddir)/config.status $(srcdir)/openvpn.spec.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags-am uninstall uninstall-am
-
-.PRECIOUS: Makefile
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel
deleted file mode 100755
index bfde221..0000000
--- a/distro/rpm/openvpn.init.d.rhel
+++ /dev/null
@@ -1,244 +0,0 @@
-#!/bin/sh
-#
-# openvpn       This shell script takes care of starting and stopping
-#               openvpn on RedHat or other chkconfig-based system.
-#
-# chkconfig: 345 24 76
-#
-# description: OpenVPN is a robust and highly flexible tunneling application \
-#              that uses all of the encryption, authentication, and \
-#              certification features of the OpenSSL library to securely \
-#              tunnel IP networks over a single UDP port.
-#
-
-# Contributed to the OpenVPN project by
-# Douglas Keller <doug@voidstar.dyndns.org>
-# 2002.05.15
-
-# To install:
-#   copy this file to /etc/rc.d/init.d/openvpn
-#   shell> chkconfig --add openvpn
-#   shell> mkdir /etc/openvpn
-#   make .conf or .sh files in /etc/openvpn (see below)
-
-# To uninstall:
-#   run: chkconfig --del openvpn
-
-# Author's Notes:
-#
-# I have created an /etc/init.d init script and enhanced openvpn.spec to
-# automatically register the init script.  Once the RPM is installed you
-# can start and stop OpenVPN with "service openvpn start" and "service
-# openvpn stop".
-#
-# The init script does the following:
-#
-# - Starts an openvpn process for each .conf file it finds in
-#   /etc/openvpn.
-#
-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
-#   it before starting openvpn (useful for doing openvpn --mktun...).
-#
-# - In addition to start/stop you can do:
-#
-#   service openvpn reload - SIGHUP
-#   service openvpn reopen - SIGUSR1
-#   service openvpn status - SIGUSR2
-#
-# Modifications:
-#
-# 2003.05.02
-#   * Changed == to = for sh compliance (Bishop Clark).
-#   * If condrestart|reload|reopen|status, check that we were
-#     actually started (James Yonan).
-#   * Added lock, piddir, and work variables (James Yonan).
-#   * If start is attempted twice, without an intervening stop, or
-#     if start is attempted when previous start was not properly
-#     shut down, then kill any previously started processes, before
-#     commencing new start operation (James Yonan).
-#   * Do a better job of flagging errors on start, and properly
-#     returning success or failure status to caller (James Yonan).
-#
-# 2005.04.04
-#   * Added openvpn-startup and openvpn-shutdown script calls
-#     (James Yonan).
-#
-
-# Location of openvpn binary
-openvpn=""
-openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
-for location in $openvpn_locations
-do
-  if [ -f "$location" ]
-  then
-    openvpn=$location
-  fi
-done
-
-# Lockfile
-lock="/var/lock/subsys/openvpn"
-
-# PID directory
-piddir="/var/run/openvpn"
-
-# Our working directory
-work=/etc/openvpn
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-if [ "${NETWORKING}" = "no" ]
-then
-  echo "Networking is down"
-  exit 0
-fi
-
-# Check that binary exists
-if ! [ -f  $openvpn ] 
-then
-  echo "openvpn binary not found"
-  exit 0
-fi
-
-# See how we were called.
-case "$1" in
-  start)
-	echo -n $"Starting openvpn: "
-
-	/sbin/modprobe tun >/dev/null 2>&1
-
-	# From a security perspective, I think it makes
-	# sense to remove this, and have users who need
-	# it explictly enable in their --up scripts or
-	# firewall setups.
-
-	#echo 1 > /proc/sys/net/ipv4/ip_forward
-
-	# Run startup script, if defined
-	if [ -f $work/openvpn-startup ]; then
-	    $work/openvpn-startup
-	fi
-
-	if [ ! -d  $piddir ]; then
-	    mkdir $piddir
-	fi
-
-	if [ -f $lock ]; then
-	    # we were not shut down correctly
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	      if [ -s $pidf ]; then
-		kill `cat $pidf` >/dev/null 2>&1
-	      fi
-	      rm -f $pidf
-	    done
-	    rm -f $lock
-	    sleep 2
-	fi
-
-	rm -f $piddir/*.pid
-	cd $work
-
-	# Start every .conf in $work and run .sh if exists
-	errors=0
-	successes=0
-	for c in `/bin/ls *.conf 2>/dev/null`; do
-	    bn=${c%%.conf}
-	    if [ -f "$bn.sh" ]; then
-		. ./$bn.sh
-	    fi
-	    rm -f $piddir/$bn.pid
-	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
-	    if [ $? = 0 ]; then
-		successes=1
-	    else
-		errors=1
-	    fi
-	done
-
-	if [ $errors = 1 ]; then
-	    failure; echo
-	else
-	    success; echo
-	fi
-
-	if [ $successes = 1 ]; then
-	    touch $lock
-	fi
-	;;
-  stop)
-	echo -n $"Shutting down openvpn: "
-	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	  if [ -s $pidf ]; then
-	    kill `cat $pidf` >/dev/null 2>&1
-	  fi
-	  rm -f $pidf
-	done
-
-	# Run shutdown script, if defined
-	if [ -f $work/openvpn-shutdown ]; then
-	    $work/openvpn-shutdown
-	fi
-
-	success; echo
-	rm -f $lock
-	;;
-  restart)
-	$0 stop
-	sleep 2
-	$0 start
-	;;
-  reload)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -HUP `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-	;;
-  reopen)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR1 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-	;;
-  condrestart)
-	if [ -f $lock ]; then
-	    $0 stop
-	    # avoid race
-	    sleep 2
-	    $0 start
-	fi
-	;;
-  status)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR2 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	    echo "Status written to /var/log/messages"
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-        ;;
-  *)
-	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
-	exit 1
-	;;
-esac
-exit 0
diff --git a/distro/rpm/openvpn.init.d.suse b/distro/rpm/openvpn.init.d.suse
deleted file mode 100644
index 270024e..0000000
--- a/distro/rpm/openvpn.init.d.suse
+++ /dev/null
@@ -1,264 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:                     openvpn
-# Required-Start:               $network
-# Required-Stop:                $network
-# Default-Start:                3 5
-# Default-Stop:                 0 1 2 6
-# Short-Description:            This shell script takes care of starting and stopping OpenVPN.
-# Description:                  OpenVPN is a robust and highly flexible tunneling application that uses all of the encryption, authentication, and certification features of the OpenSSL library to securely tunnel IP networks over a single UDP port. 
-### END INIT INFO
-
-# Contributed to the OpenVPN project by
-# Douglas Keller <doug@voidstar.dyndns.org>
-# 2002.05.15
-
-# Modified for SuSE by
-# Frank Plohmann <openvpn@franks-planet.de>
-# 2003.08.24
-# Please feel free to contact me if you have problems or suggestions
-# using this script.
-
-# To install:
-#   copy this file to /etc/rc.d/init.d/openvpn
-#   use the runlevel editor in Yast to add it to runlevel 3 and/or 5
-#   shell> mkdir /etc/openvpn
-#   make .conf or .sh files in /etc/openvpn (see below)
-
-# To uninstall:
-#   use also Yast and the runlevel editor to uninstall
-
-# Author's Notes:
-#
-# I have created an /etc/init.d init script and enhanced openvpn.spec to
-# automatically register the init script.  Once the RPM is installed you
-# can start and stop OpenVPN with "service openvpn start" and "service
-# openvpn stop".
-#
-# The init script does the following:
-#
-# - Starts an openvpn process for each .conf file it finds in
-#   /etc/openvpn.
-#
-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
-#   it before starting openvpn (useful for doing openvpn --mktun...).
-#
-# - In addition to start/stop you can do:
-#
-#   /etc/init.d/openvpn reload - SIGHUP
-#   /etc/init.d/openvpn reopen - SIGUSR1
-#   /etc/init.d/openvpn status - SIGUSR2
-
-# Modifications 2003.05.02
-#   * Changed == to = for sh compliance (Bishop Clark).
-#   * If condrestart|reload|reopen|status, check that we were
-#     actually started (James Yonan).
-#   * Added lock, piddir, and work variables (James Yonan).
-#   * If start is attempted twice, without an intervening stop, or
-#     if start is attempted when previous start was not properly
-#     shut down, then kill any previously started processes, before
-#     commencing new start operation (James Yonan).
-#   * Do a better job of flagging errors on start, and properly
-#     returning success or failure status to caller (James Yonan).
-#
-# Modifications 2003.08.24
-#   * Converted the script for SuSE Linux distribution. 
-#	  Tested with version 8.2 (Frank Plohmann).
-#		- removed "chkconfig" header
-#		- added Yast header
-#		- changed installation notes
-#		- corrected path to openvpn binary
-#		- removes sourcing "functions"
-#		- removed sourcing "network"
-#		- removed network checking. it seemed not to work with SuSE.
-#		- added sourcing "rc.status", comments and "rc_reset" command
-#		- removed "succes; echo" and "failure; echo" lines
-#		- added "rc_status" lines at the end of each section
-#		- changed "service" to "/etc/init.d/" in "In addition to start/stop"
-#		  section above.
-#
-# Modifications 2005.04.04
-#   * Added openvpn-startup and openvpn-shutdown script calls (James Yonan).
-#
-
-# Location of openvpn binary
-openvpn="/usr/sbin/openvpn"
-
-# Lockfile
-lock="/var/lock/subsys/openvpn"
-
-# PID directory
-piddir="/var/run/openvpn"
-
-# Our working directory
-work=/etc/openvpn
-
-# Source rc functions
-. /etc/rc.status
-
-# Shell functions sourced from /etc/rc.status:
-#      rc_check         check and set local and overall rc status
-#      rc_status        check and set local and overall rc status
-#      rc_status -v     ditto but be verbose in local rc status
-#      rc_status -v -r  ditto and clear the local rc status
-#      rc_failed        set local and overall rc status to failed
-#      rc_reset         clear local rc status (overall remains)
-#      rc_exit          exit appropriate to overall rc status
-
-#      rc_status        check and set local and overall rc status
-#      rc_status -v     ditto but be verbose in local rc status
-#      rc_status -v -r  ditto and clear the local rc status
-#      rc_failed        set local and overall rc status to failed
-#      rc_reset         clear local rc status (overall remains)
-#      rc_exit          exit appropriate to overall rc status
-
-# First reset status of this service
-rc_reset
-
-[ -f  $openvpn ] || exit 0
-
-# See how we were called.
-case "$1" in
-  start)
-	echo -n $"Starting openvpn: "
-
-	/sbin/modprobe tun >/dev/null 2>&1
-
-	# From a security perspective, I think it makes
-	# sense to remove this, and have users who need
-	# it explictly enable in their --up scripts or
-	# firewall setups.
-
-	#echo 1 > /proc/sys/net/ipv4/ip_forward
-
-	# Run startup script, if defined
-	if [ -f $work/openvpn-startup ]; then
-	    $work/openvpn-startup
-	fi
-
-	if [ ! -d  $piddir ]; then
-	    mkdir $piddir
-	fi
-
-	if [ -f $lock ]; then
-	    # we were not shut down correctly
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	      if [ -s $pidf ]; then
-		kill `cat $pidf` >/dev/null 2>&1
-	      fi
-	      rm -f $pidf
-	    done
-	    rm -f $lock
-	    sleep 2
-	fi
-
-	rm -f $piddir/*.pid
-	cd $work
-
-	# Start every .conf in $work and run .sh if exists
-	errors=0
-	successes=0
-	for c in `/bin/ls *.conf 2>/dev/null`; do
-	    bn=${c%%.conf}
-	    if [ -f "$bn.sh" ]; then
-		. ./$bn.sh
-	    fi
-	    rm -f $piddir/$bn.pid
-	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
-	    if [ $? = 0 ]; then
-		successes=1
-	    else
-		errors=1
-	    fi
-	done
-
-	if [ $successes = 1 ]; then
-	    touch $lock
-	fi
-
-	rc_status -v
-	;;
-  stop)
-	echo -n $"Shutting down openvpn: "
-	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-	  if [ -s $pidf ]; then
-	    kill `cat $pidf` >/dev/null 2>&1
-	  fi
-	  rm -f $pidf
-	done
-
-	# Run shutdown script, if defined
-	if [ -f $work/openvpn-shutdown ]; then
-	    $work/openvpn-shutdown
-	fi
-
-	rm -f $lock
-
-	rc_status -v
-	;;
-  restart)
-	$0 stop
-	sleep 2
-	$0 start
-
-	rc_status
-	;;
-  reload)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -HUP `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-
-	rc_status -v
-	;;
-  reopen)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR1 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-
-	rc_status -v
-	;;
-  condrestart)
-	if [ -f $lock ]; then
-	    $0 stop
-	    # avoid race
-	    sleep 2
-	    $0 start
-	fi
-
-	rc_status
-	;;
-  status)
-	if [ -f $lock ]; then
-	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
-		if [ -s $pidf ]; then
-		    kill -USR2 `cat $pidf` >/dev/null 2>&1
-		fi
-	    done
-	    echo "Status written to /var/log/messages"
-	else
-	    echo "openvpn: service not started"
-	    exit 1
-	fi
-
-	rc_status -v
-        ;;
-  *)
-	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
-	exit 1
-esac
-
-exit 0
diff --git a/distro/rpm/openvpn.spec b/distro/rpm/openvpn.spec
deleted file mode 100644
index c0d4354..0000000
--- a/distro/rpm/openvpn.spec
+++ /dev/null
@@ -1,248 +0,0 @@
-# OpenVPN spec file, used to drive rpmbuild
-
-# OPTIONS
-#
-# Disable LZO
-#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1'
-#
-# Disable PAM plugin
-#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1'
-#
-# Allow passwords to be read from files
-#   rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1'
-
-Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
-Name:		openvpn
-Version:	2.4.7
-Release:	1
-URL:		http://openvpn.net/
-Source0:	http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz
-
-License:	GPL
-Group:		Applications/Internet
-Vendor:		James Yonan <jim@yonan.net>
-Packager:	James Yonan <jim@yonan.net>
-BuildRoot:	%{_tmppath}/%{name}-%(id -un)
-
-#
-# Include dependencies manually
-#
-
-AutoReq: 0
-
-BuildRequires:	openssl-devel >= 0.9.7
-Requires:	openssl       >= 0.9.7
-
-%if "%{_vendor}" == "Mandrakesoft"
-%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
-%{!?without_lzo:Requires:	liblzo1       >= 1.07}
-%else
-%if "%{_vendor}" == "MandrakeSoft"
-%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
-%{!?without_lzo:Requires:	liblzo1       >= 1.07}
-%else
-%{!?without_lzo:BuildRequires:	lzo-devel >= 1.07}
-%{!?without_lzo:Requires:	lzo       >= 1.07}
-%endif
-%endif
-
-%{!?without_pam:BuildRequires:	pam-devel}
-%{!?without_pam:Requires:	pam}
-
-%{?with_pkcs11:BuildRequires:	pkcs11-helper-devel}
-%{?with_pkcs11:Requires:	pkcs11-helper}
-
-#
-# Description
-#
-
-%description
-OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
-OpenVPN supports SSL/TLS security,
-ethernet bridging,
-TCP or UDP tunnel transport through proxies or NAT,
-support for dynamic IP addresses and DHCP,
-scalability to hundreds or thousands of users,
-and portability to most major OS platforms.
-
-%package devel
-Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
-Group:		Applications/Internet
-Requires:	%{name}
-%description devel
-Development support for OpenVPN.
-
-#
-# Define vendor type
-#
-
-%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc"
-%define VENDOR SuSE
-%else
-%define VENDOR %_vendor
-%endif
-
-#
-# Other definitions
-#
-
-%define debug_package %{nil}
-
-#
-# Build OpenVPN binary
-#
-
-%prep
-%setup -q
-
-%build
-%configure \
-	--disable-dependency-tracking \
-	--docdir="%{_docdir}/%{name}-%{version}" \
-	%{?with_password_save:--enable-password-save} \
-	%{!?without_lzo:--enable-lzo} \
-	%{?with_pkcs11:--enable-pkcs11} \
-	%{?without_pam:--disable-plugin-auth-pam}
-%__make
-
-#
-# Installation section
-#
-
-%install
-[ %{buildroot} != "/" ] && rm -rf %{buildroot}
-%__make install DESTDIR="%{buildroot}"
-
-# Install init script
-%if "%{VENDOR}" == "SuSE"
-%__install -c -d -m 755 "%{buildroot}/etc/init.d"
-%__install -c -m 755 "distro/rpm/%{name}.init.d.suse" "%{buildroot}/etc/init.d/%{name}"
-%else
-%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d"
-%__install -c -m 755 distro/rpm/%{name}.init.d.rhel "%{buildroot}/etc/rc.d/init.d/%{name}"
-%endif
-
-# Install /etc/openvpn
-%__install -c -d -m 755 "%{buildroot}/etc/%{name}"
-
-# Install extra %doc stuff
-cp -r AUTHORS ChangeLog NEWS contrib/ sample/ \
-	"%{buildroot}/%{_docdir}/%{name}-%{version}"
-
-#
-# Clean section
-#
-
-%clean
-[ %{buildroot} != "/" ] && rm -rf "%{buildroot}"
-
-#
-# On Linux 2.4, make the device node
-#
-
-%post
-case "`uname -r`" in
-2.4*)
-	/bin/mkdir /dev/net >/dev/null 2>&1
-	/bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1
-	;;
-esac
-
-#
-# Handle the init script
-#
-
-/sbin/chkconfig --add %{name}
-%if "%{VENDOR}" == "SuSE"
-/etc/init.d/openvpn restart
-%else
-/sbin/service %{name} condrestart
-%endif
-%preun
-if [ "$1" = 0 ]
-then
-	%if "%{VENDOR}" == "SuSE"
-	/etc/init.d/openvpn stop
-	%else
-	/sbin/service %{name} stop
-	%endif
-	/sbin/chkconfig --del %{name}
-fi
-
-#
-# Files section
-#
-# don't use %doc as old rpmbuild removes it[1].
-# [1] http://rpm.org/ticket/836
-
-%files
-%defattr(-,root,root)
-%{_mandir}
-%{_sbindir}/%{name}
-%{_libdir}/%{name}
-%{_docdir}/%{name}-%{version}
-%dir /etc/%{name}
-%if "%{VENDOR}" == "SuSE"
-/etc/init.d/%{name}
-%else
-/etc/rc.d/init.d/%{name}
-%endif
-
-%files devel
-%defattr(-,root,root)
-%{_includedir}/*
-
-%changelog
-* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net>
-- Removed management/ directory from %doc
-
-* Thu Dec 14 2006 Alon Bar-Lev
-- Added with_pkcs11
-
-* Mon Aug 2 2005 James Yonan
-- Fixed build problem with --define 'without_pam 1'
-
-* Mon Apr 4 2005 James Yonan
-- Moved some files from /usr/share/openvpn to %doc for compatibility
-  with Dag Wieers' RPM repository
-
-* Sat Mar 12 2005 Tom Walsh
-- Added MandrakeSoft liblzo1 require
-
-* Fri Dec 10 2004 James Yonan
-- Added AutoReq: 0 for manual dependencies
-
-* Fri Dec 10 2004 James Yonan
-- Packaged the plugins
-
-* Sun Nov 7 2004 Umberto Nicoletti
-- SuSE support
-
-* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca>
-- restrict what we claim in /etc/ to avoid ownership conflicts
-
-* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1.
-- Have the version number filled in by autoconf.
-
-* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1
-- Fixed %preun to only remove service on final uninstall
-
-* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1
-- Added condrestart to openvpn.spec & openvpn.init.
-
-* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1
-- Added mknod for Linux 2.4.
-
-* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2
-- Added init scripts
-- Added conf file support
-
-* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1
-- Added new directories for config examples and such
-
-* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1
-- Updated buildroot directive and cleanup command
-- added easy-rsa utilities
-
-* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1
-- Initial build.
diff --git a/distro/rpm/openvpn.spec.in b/distro/rpm/openvpn.spec.in
deleted file mode 100644
index 20a8c89..0000000
--- a/distro/rpm/openvpn.spec.in
+++ /dev/null
@@ -1,248 +0,0 @@
-# OpenVPN spec file, used to drive rpmbuild
-
-# OPTIONS
-#
-# Disable LZO
-#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1'
-#
-# Disable PAM plugin
-#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1'
-#
-# Allow passwords to be read from files
-#   rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1'
-
-Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
-Name:		@PACKAGE@
-Version:	@VERSION@
-Release:	1
-URL:		http://openvpn.net/
-Source0:	http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz
-
-License:	GPL
-Group:		Applications/Internet
-Vendor:		James Yonan <jim@yonan.net>
-Packager:	James Yonan <jim@yonan.net>
-BuildRoot:	%{_tmppath}/%{name}-%(id -un)
-
-#
-# Include dependencies manually
-#
-
-AutoReq: 0
-
-BuildRequires:	openssl-devel >= 0.9.7
-Requires:	openssl       >= 0.9.7
-
-%if "%{_vendor}" == "Mandrakesoft"
-%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
-%{!?without_lzo:Requires:	liblzo1       >= 1.07}
-%else
-%if "%{_vendor}" == "MandrakeSoft"
-%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
-%{!?without_lzo:Requires:	liblzo1       >= 1.07}
-%else
-%{!?without_lzo:BuildRequires:	lzo-devel >= 1.07}
-%{!?without_lzo:Requires:	lzo       >= 1.07}
-%endif
-%endif
-
-%{!?without_pam:BuildRequires:	pam-devel}
-%{!?without_pam:Requires:	pam}
-
-%{?with_pkcs11:BuildRequires:	pkcs11-helper-devel}
-%{?with_pkcs11:Requires:	pkcs11-helper}
-
-#
-# Description
-#
-
-%description
-OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
-OpenVPN supports SSL/TLS security,
-ethernet bridging,
-TCP or UDP tunnel transport through proxies or NAT,
-support for dynamic IP addresses and DHCP,
-scalability to hundreds or thousands of users,
-and portability to most major OS platforms.
-
-%package devel
-Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
-Group:		Applications/Internet
-Requires:	%{name}
-%description devel
-Development support for OpenVPN.
-
-#
-# Define vendor type
-#
-
-%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc"
-%define VENDOR SuSE
-%else
-%define VENDOR %_vendor
-%endif
-
-#
-# Other definitions
-#
-
-%define debug_package %{nil}
-
-#
-# Build OpenVPN binary
-#
-
-%prep
-%setup -q
-
-%build
-%configure \
-	--disable-dependency-tracking \
-	--docdir="%{_docdir}/%{name}-%{version}" \
-	%{?with_password_save:--enable-password-save} \
-	%{!?without_lzo:--enable-lzo} \
-	%{?with_pkcs11:--enable-pkcs11} \
-	%{?without_pam:--disable-plugin-auth-pam}
-%__make
-
-#
-# Installation section
-#
-
-%install
-[ %{buildroot} != "/" ] && rm -rf %{buildroot}
-%__make install DESTDIR="%{buildroot}"
-
-# Install init script
-%if "%{VENDOR}" == "SuSE"
-%__install -c -d -m 755 "%{buildroot}/etc/init.d"
-%__install -c -m 755 "distro/rpm/%{name}.init.d.suse" "%{buildroot}/etc/init.d/%{name}"
-%else
-%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d"
-%__install -c -m 755 distro/rpm/%{name}.init.d.rhel "%{buildroot}/etc/rc.d/init.d/%{name}"
-%endif
-
-# Install /etc/openvpn
-%__install -c -d -m 755 "%{buildroot}/etc/%{name}"
-
-# Install extra %doc stuff
-cp -r AUTHORS ChangeLog NEWS contrib/ sample/ \
-	"%{buildroot}/%{_docdir}/%{name}-%{version}"
-
-#
-# Clean section
-#
-
-%clean
-[ %{buildroot} != "/" ] && rm -rf "%{buildroot}"
-
-#
-# On Linux 2.4, make the device node
-#
-
-%post
-case "`uname -r`" in
-2.4*)
-	/bin/mkdir /dev/net >/dev/null 2>&1
-	/bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1
-	;;
-esac
-
-#
-# Handle the init script
-#
-
-/sbin/chkconfig --add %{name}
-%if "%{VENDOR}" == "SuSE"
-/etc/init.d/openvpn restart
-%else
-/sbin/service %{name} condrestart
-%endif
-%preun
-if [ "$1" = 0 ]
-then
-	%if "%{VENDOR}" == "SuSE"
-	/etc/init.d/openvpn stop
-	%else
-	/sbin/service %{name} stop
-	%endif
-	/sbin/chkconfig --del %{name}
-fi
-
-#
-# Files section
-#
-# don't use %doc as old rpmbuild removes it[1].
-# [1] http://rpm.org/ticket/836
-
-%files
-%defattr(-,root,root)
-%{_mandir}
-%{_sbindir}/%{name}
-%{_libdir}/%{name}
-%{_docdir}/%{name}-%{version}
-%dir /etc/%{name}
-%if "%{VENDOR}" == "SuSE"
-/etc/init.d/%{name}
-%else
-/etc/rc.d/init.d/%{name}
-%endif
-
-%files devel
-%defattr(-,root,root)
-%{_includedir}/*
-
-%changelog
-* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net>
-- Removed management/ directory from %doc
-
-* Thu Dec 14 2006 Alon Bar-Lev
-- Added with_pkcs11
-
-* Mon Aug 2 2005 James Yonan
-- Fixed build problem with --define 'without_pam 1'
-
-* Mon Apr 4 2005 James Yonan
-- Moved some files from /usr/share/openvpn to %doc for compatibility
-  with Dag Wieers' RPM repository
-
-* Sat Mar 12 2005 Tom Walsh
-- Added MandrakeSoft liblzo1 require
-
-* Fri Dec 10 2004 James Yonan
-- Added AutoReq: 0 for manual dependencies
-
-* Fri Dec 10 2004 James Yonan
-- Packaged the plugins
-
-* Sun Nov 7 2004 Umberto Nicoletti
-- SuSE support
-
-* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca>
-- restrict what we claim in /etc/ to avoid ownership conflicts
-
-* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1.
-- Have the version number filled in by autoconf.
-
-* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1
-- Fixed %preun to only remove service on final uninstall
-
-* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1
-- Added condrestart to openvpn.spec & openvpn.init.
-
-* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1
-- Added mknod for Linux 2.4.
-
-* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2
-- Added init scripts
-- Added conf file support
-
-* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1
-- Added new directories for config examples and such
-
-* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1
-- Updated buildroot directive and cleanup command
-- added easy-rsa utilities
-
-* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1
-- Initial build.
diff --git a/distro/systemd/Makefile.in b/distro/systemd/Makefile.in
index 0458aa3..e023725 100644
--- a/distro/systemd/Makefile.in
+++ b/distro/systemd/Makefile.in
@@ -286,9 +286,6 @@ TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
 TEST_CFLAGS = @TEST_CFLAGS@
 TEST_LDFLAGS = @TEST_LDFLAGS@
 TMPFILES_DIR = @TMPFILES_DIR@
-VENDOR_BUILD_ROOT = @VENDOR_BUILD_ROOT@
-VENDOR_DIST_ROOT = @VENDOR_DIST_ROOT@
-VENDOR_SRC_ROOT = @VENDOR_SRC_ROOT@
 VERSION = @VERSION@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@