Merge tag 'upstream/2.3_rc1'

Upstream version 2.3_rc1

8 files changed, 2070 insertions, 0 deletions

diff --git a/distro/Makefile.am b/distro/Makefile.am
new file mode 100644
index 0000000..2dd6a6e
--- /dev/null
+++ b/distro/Makefile.am
@@ -0,0 +1,15 @@
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
+#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
+#
+
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+SUBDIRS = rpm
diff --git a/distro/Makefile.in b/distro/Makefile.in
new file mode 100644
index 0000000..fb6185a
--- /dev/null
+++ b/distro/Makefile.in
@@ -0,0 +1,613 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
+#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
+#
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = distro
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \
+	$(top_srcdir)/m4/ax_socklen_t.m4 \
+	$(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \
+	$(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DL_LIBS = @DL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GIT = @GIT@
+GREP = @GREP@
+IFCONFIG = @IFCONFIG@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPROUTE = @IPROUTE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBPAM_CFLAGS = @LIBPAM_CFLAGS@
+LIBPAM_LIBS = @LIBPAM_LIBS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LZO_CFLAGS = @LZO_CFLAGS@
+LZO_LIBS = @LZO_LIBS@
+MAKEINFO = @MAKEINFO@
+MAN2HTML = @MAN2HTML@
+MKDIR_P = @MKDIR_P@
+NETSTAT = @NETSTAT@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CRYPTO_CFLAGS = @OPENSSL_CRYPTO_CFLAGS@
+OPENSSL_CRYPTO_LIBS = @OPENSSL_CRYPTO_LIBS@
+OPENSSL_SSL_CFLAGS = @OPENSSL_SSL_CFLAGS@
+OPENSSL_SSL_LIBS = @OPENSSL_SSL_LIBS@
+OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@
+OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@
+OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@
+OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@
+OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@
+OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@
+OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@
+OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@
+PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@
+PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@
+POLARSSL_CFLAGS = @POLARSSL_CFLAGS@
+POLARSSL_LIBS = @POLARSSL_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+ROUTE = @ROUTE@
+SED = @SED@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOCKETS_LIBS = @SOCKETS_LIBS@
+STRIP = @STRIP@
+TAP_CFLAGS = @TAP_CFLAGS@
+TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@
+TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@
+TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+plugindir = @plugindir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sampledir = @sampledir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+SUBDIRS = rpm
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu distro/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu distro/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic clean-libtool \
+	ctags ctags-recursive distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/distro/rpm/Makefile.am b/distro/rpm/Makefile.am
new file mode 100644
index 0000000..536061d
--- /dev/null
+++ b/distro/rpm/Makefile.am
@@ -0,0 +1,18 @@
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
+#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
+#
+
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+dist_noinst_DATA = \
+	openvpn.spec \
+	openvpn.init.d.rhel \
+	openvpn.init.d.suse
diff --git a/distro/rpm/Makefile.in b/distro/rpm/Makefile.in
new file mode 100644
index 0000000..9477fed
--- /dev/null
+++ b/distro/rpm/Makefile.in
@@ -0,0 +1,420 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
+#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
+#
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = distro/rpm
+DIST_COMMON = $(dist_noinst_DATA) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/openvpn.spec.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \
+	$(top_srcdir)/m4/ax_socklen_t.m4 \
+	$(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \
+	$(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = openvpn.spec
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+DATA = $(dist_noinst_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DL_LIBS = @DL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GIT = @GIT@
+GREP = @GREP@
+IFCONFIG = @IFCONFIG@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPROUTE = @IPROUTE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBPAM_CFLAGS = @LIBPAM_CFLAGS@
+LIBPAM_LIBS = @LIBPAM_LIBS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LZO_CFLAGS = @LZO_CFLAGS@
+LZO_LIBS = @LZO_LIBS@
+MAKEINFO = @MAKEINFO@
+MAN2HTML = @MAN2HTML@
+MKDIR_P = @MKDIR_P@
+NETSTAT = @NETSTAT@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CRYPTO_CFLAGS = @OPENSSL_CRYPTO_CFLAGS@
+OPENSSL_CRYPTO_LIBS = @OPENSSL_CRYPTO_LIBS@
+OPENSSL_SSL_CFLAGS = @OPENSSL_SSL_CFLAGS@
+OPENSSL_SSL_LIBS = @OPENSSL_SSL_LIBS@
+OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@
+OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@
+OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@
+OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@
+OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@
+OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@
+OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@
+OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@
+PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@
+PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@
+POLARSSL_CFLAGS = @POLARSSL_CFLAGS@
+POLARSSL_LIBS = @POLARSSL_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+ROUTE = @ROUTE@
+SED = @SED@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOCKETS_LIBS = @SOCKETS_LIBS@
+STRIP = @STRIP@
+TAP_CFLAGS = @TAP_CFLAGS@
+TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@
+TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@
+TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+plugindir = @plugindir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sampledir = @sampledir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+dist_noinst_DATA = \
+	openvpn.spec \
+	openvpn.init.d.rhel \
+	openvpn.init.d.suse
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu distro/rpm/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu distro/rpm/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+openvpn.spec: $(top_builddir)/config.status $(srcdir)/openvpn.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel
new file mode 100755
index 0000000..821abd5
--- /dev/null
+++ b/distro/rpm/openvpn.init.d.rhel
@@ -0,0 +1,244 @@
+#!/bin/sh
+#
+# openvpn       This shell script takes care of starting and stopping
+#               openvpn on RedHat or other chkconfig-based system.
+#
+# chkconfig: 345 24 76
+#
+# description: OpenVPN is a robust and highly flexible tunneling application \
+#              that uses all of the encryption, authentication, and \
+#              certification features of the OpenSSL library to securely \
+#              tunnel IP networks over a single UDP port.
+#
+
+# Contributed to the OpenVPN project by
+# Douglas Keller <doug@voidstar.dyndns.org>
+# 2002.05.15
+
+# To install:
+#   copy this file to /etc/rc.d/init.d/openvpn
+#   shell> chkconfig --add openvpn
+#   shell> mkdir /etc/openvpn
+#   make .conf or .sh files in /etc/openvpn (see below)
+
+# To uninstall:
+#   run: chkconfig --del openvpn
+
+# Author's Notes:
+#
+# I have created an /etc/init.d init script and enhanced openvpn.spec to
+# automatically register the init script.  Once the RPM is installed you
+# can start and stop OpenVPN with "service openvpn start" and "service
+# openvpn stop".
+#
+# The init script does the following:
+#
+# - Starts an openvpn process for each .conf file it finds in
+#   /etc/openvpn.
+#
+# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
+#   it before starting openvpn (useful for doing openvpn --mktun...).
+#
+# - In addition to start/stop you can do:
+#
+#   service openvpn reload - SIGHUP
+#   service openvpn reopen - SIGUSR1
+#   service openvpn status - SIGUSR2
+#
+# Modifications:
+#
+# 2003.05.02
+#   * Changed == to = for sh compliance (Bishop Clark).
+#   * If condrestart|reload|reopen|status, check that we were
+#     actually started (James Yonan).
+#   * Added lock, piddir, and work variables (James Yonan).
+#   * If start is attempted twice, without an intervening stop, or
+#     if start is attempted when previous start was not properly
+#     shut down, then kill any previously started processes, before
+#     commencing new start operation (James Yonan).
+#   * Do a better job of flagging errors on start, and properly
+#     returning success or failure status to caller (James Yonan).
+#
+# 2005.04.04
+#   * Added openvpn-startup and openvpn-shutdown script calls
+#     (James Yonan).
+#
+
+# Location of openvpn binary
+openvpn=""
+openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
+for location in $openvpn_locations
+do
+  if [ -f "$location" ]
+  then
+    openvpn=$location
+  fi
+done
+
+# Lockfile
+lock="/var/lock/subsys/openvpn"
+
+# PID directory
+piddir="/var/run/openvpn"
+
+# Our working directory
+work=/etc/openvpn
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+if [ ${NETWORKING} = "no" ]
+then
+  echo "Networking is down"
+  exit 0
+fi
+
+# Check that binary exists
+if ! [ -f  $openvpn ] 
+then
+  echo "openvpn binary not found"
+  exit 0
+fi
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n $"Starting openvpn: "
+
+	/sbin/modprobe tun >/dev/null 2>&1
+
+	# From a security perspective, I think it makes
+	# sense to remove this, and have users who need
+	# it explictly enable in their --up scripts or
+	# firewall setups.
+
+	#echo 1 > /proc/sys/net/ipv4/ip_forward
+
+	# Run startup script, if defined
+	if [ -f $work/openvpn-startup ]; then
+	    $work/openvpn-startup
+	fi
+
+	if [ ! -d  $piddir ]; then
+	    mkdir $piddir
+	fi
+
+	if [ -f $lock ]; then
+	    # we were not shut down correctly
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	      if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+	      fi
+	      rm -f $pidf
+	    done
+	    rm -f $lock
+	    sleep 2
+	fi
+
+	rm -f $piddir/*.pid
+	cd $work
+
+	# Start every .conf in $work and run .sh if exists
+	errors=0
+	successes=0
+	for c in `/bin/ls *.conf 2>/dev/null`; do
+	    bn=${c%%.conf}
+	    if [ -f "$bn.sh" ]; then
+		. $bn.sh
+	    fi
+	    rm -f $piddir/$bn.pid
+	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
+	    if [ $? = 0 ]; then
+		successes=1
+	    else
+		errors=1
+	    fi
+	done
+
+	if [ $errors = 1 ]; then
+	    failure; echo
+	else
+	    success; echo
+	fi
+
+	if [ $successes = 1 ]; then
+	    touch $lock
+	fi
+	;;
+  stop)
+	echo -n $"Shutting down openvpn: "
+	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	  if [ -s $pidf ]; then
+	    kill `cat $pidf` >/dev/null 2>&1
+	  fi
+	  rm -f $pidf
+	done
+
+	# Run shutdown script, if defined
+	if [ -f $work/openvpn-shutdown ]; then
+	    $work/openvpn-shutdown
+	fi
+
+	success; echo
+	rm -f $lock
+	;;
+  restart)
+	$0 stop
+	sleep 2
+	$0 start
+	;;
+  reload)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -HUP `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+	;;
+  reopen)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR1 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+	;;
+  condrestart)
+	if [ -f $lock ]; then
+	    $0 stop
+	    # avoid race
+	    sleep 2
+	    $0 start
+	fi
+	;;
+  status)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR2 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	    echo "Status written to /var/log/messages"
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+        ;;
+  *)
+	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
+	exit 1
+	;;
+esac
+exit 0
diff --git a/distro/rpm/openvpn.init.d.suse b/distro/rpm/openvpn.init.d.suse
new file mode 100644
index 0000000..2bac7f3
--- /dev/null
+++ b/distro/rpm/openvpn.init.d.suse
@@ -0,0 +1,264 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:                     openvpn
+# Required-Start:               $network
+# Required-Stop:                $network
+# Default-Start:                3 5
+# Default-Stop:                 0 1 2 6
+# Short-Description:            This shell script takes care of starting and stopping OpenVPN.
+# Description:                  OpenVPN is a robust and highly flexible tunneling application that uses all of the encryption, authentication, and certification features of the OpenSSL library to securely tunnel IP networks over a single UDP port. 
+### END INIT INFO
+
+# Contributed to the OpenVPN project by
+# Douglas Keller <doug@voidstar.dyndns.org>
+# 2002.05.15
+
+# Modified for SuSE by
+# Frank Plohmann <openvpn@franks-planet.de>
+# 2003.08.24
+# Please feel free to contact me if you have problems or suggestions
+# using this script.
+
+# To install:
+#   copy this file to /etc/rc.d/init.d/openvpn
+#   use the runlevel editor in Yast to add it to runlevel 3 and/or 5
+#   shell> mkdir /etc/openvpn
+#   make .conf or .sh files in /etc/openvpn (see below)
+
+# To uninstall:
+#   use also Yast and the runlevel editor to uninstall
+
+# Author's Notes:
+#
+# I have created an /etc/init.d init script and enhanced openvpn.spec to
+# automatically register the init script.  Once the RPM is installed you
+# can start and stop OpenVPN with "service openvpn start" and "service
+# openvpn stop".
+#
+# The init script does the following:
+#
+# - Starts an openvpn process for each .conf file it finds in
+#   /etc/openvpn.
+#
+# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
+#   it before starting openvpn (useful for doing openvpn --mktun...).
+#
+# - In addition to start/stop you can do:
+#
+#   /etc/init.d/openvpn reload - SIGHUP
+#   /etc/init.d/openvpn reopen - SIGUSR1
+#   /etc/init.d/openvpn status - SIGUSR2
+
+# Modifications 2003.05.02
+#   * Changed == to = for sh compliance (Bishop Clark).
+#   * If condrestart|reload|reopen|status, check that we were
+#     actually started (James Yonan).
+#   * Added lock, piddir, and work variables (James Yonan).
+#   * If start is attempted twice, without an intervening stop, or
+#     if start is attempted when previous start was not properly
+#     shut down, then kill any previously started processes, before
+#     commencing new start operation (James Yonan).
+#   * Do a better job of flagging errors on start, and properly
+#     returning success or failure status to caller (James Yonan).
+#
+# Modifications 2003.08.24
+#   * Converted the script for SuSE Linux distribution. 
+#	  Tested with version 8.2 (Frank Plohmann).
+#		- removed "chkconfig" header
+#		- added Yast header
+#		- changed installation notes
+#		- corrected path to openvpn binary
+#		- removes sourcing "functions"
+#		- removed sourcing "network"
+#		- removed network checking. it seemed not to work with SuSE.
+#		- added sourcing "rc.status", comments and "rc_reset" command
+#		- removed "succes; echo" and "failure; echo" lines
+#		- added "rc_status" lines at the end of each section
+#		- changed "service" to "/etc/init.d/" in "In addition to start/stop"
+#		  section above.
+#
+# Modifications 2005.04.04
+#   * Added openvpn-startup and openvpn-shutdown script calls (James Yonan).
+#
+
+# Location of openvpn binary
+openvpn="/usr/sbin/openvpn"
+
+# Lockfile
+lock="/var/lock/subsys/openvpn"
+
+# PID directory
+piddir="/var/run/openvpn"
+
+# Our working directory
+work=/etc/openvpn
+
+# Source rc functions
+. /etc/rc.status
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_failed        set local and overall rc status to failed
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_failed        set local and overall rc status to failed
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+
+# First reset status of this service
+rc_reset
+
+[ -f  $openvpn ] || exit 0
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n $"Starting openvpn: "
+
+	/sbin/modprobe tun >/dev/null 2>&1
+
+	# From a security perspective, I think it makes
+	# sense to remove this, and have users who need
+	# it explictly enable in their --up scripts or
+	# firewall setups.
+
+	#echo 1 > /proc/sys/net/ipv4/ip_forward
+
+	# Run startup script, if defined
+	if [ -f $work/openvpn-startup ]; then
+	    $work/openvpn-startup
+	fi
+
+	if [ ! -d  $piddir ]; then
+	    mkdir $piddir
+	fi
+
+	if [ -f $lock ]; then
+	    # we were not shut down correctly
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	      if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+	      fi
+	      rm -f $pidf
+	    done
+	    rm -f $lock
+	    sleep 2
+	fi
+
+	rm -f $piddir/*.pid
+	cd $work
+
+	# Start every .conf in $work and run .sh if exists
+	errors=0
+	successes=0
+	for c in `/bin/ls *.conf 2>/dev/null`; do
+	    bn=${c%%.conf}
+	    if [ -f "$bn.sh" ]; then
+		. $bn.sh
+	    fi
+	    rm -f $piddir/$bn.pid
+	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
+	    if [ $? = 0 ]; then
+		successes=1
+	    else
+		errors=1
+	    fi
+	done
+
+	if [ $successes = 1 ]; then
+	    touch $lock
+	fi
+
+	rc_status -v
+	;;
+  stop)
+	echo -n $"Shutting down openvpn: "
+	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	  if [ -s $pidf ]; then
+	    kill `cat $pidf` >/dev/null 2>&1
+	  fi
+	  rm -f $pidf
+	done
+
+	# Run shutdown script, if defined
+	if [ -f $work/openvpn-shutdown ]; then
+	    $work/openvpn-shutdown
+	fi
+
+	rm -f $lock
+
+	rc_status -v
+	;;
+  restart)
+	$0 stop
+	sleep 2
+	$0 start
+
+	rc_status
+	;;
+  reload)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -HUP `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+
+	rc_status -v
+	;;
+  reopen)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR1 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+
+	rc_status -v
+	;;
+  condrestart)
+	if [ -f $lock ]; then
+	    $0 stop
+	    # avoid race
+	    sleep 2
+	    $0 start
+	fi
+
+	rc_status
+	;;
+  status)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR2 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	    echo "Status written to /var/log/messages"
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+
+	rc_status -v
+        ;;
+  *)
+	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
+	exit 1
+esac
+
+exit 0
diff --git a/distro/rpm/openvpn.spec b/distro/rpm/openvpn.spec
new file mode 100644
index 0000000..ead0039
--- /dev/null
+++ b/distro/rpm/openvpn.spec
@@ -0,0 +1,248 @@
+# OpenVPN spec file, used to drive rpmbuild
+
+# OPTIONS
+#
+# Disable LZO
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1'
+#
+# Disable PAM plugin
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1'
+#
+# Allow passwords to be read from files
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1'
+
+Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+Name:		openvpn
+Version:	2.3_rc1
+Release:	1
+URL:		http://openvpn.net/
+Source0:	http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz
+
+License:	GPL
+Group:		Applications/Internet
+Vendor:		James Yonan <jim@yonan.net>
+Packager:	James Yonan <jim@yonan.net>
+BuildRoot:	%{_tmppath}/%{name}-%(id -un)
+
+#
+# Include dependencies manually
+#
+
+AutoReq: 0
+
+BuildRequires:	openssl-devel >= 0.9.7
+Requires:	openssl       >= 0.9.7
+
+%if "%{_vendor}" == "Mandrakesoft"
+%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
+%{!?without_lzo:Requires:	liblzo1       >= 1.07}
+%else
+%if "%{_vendor}" == "MandrakeSoft"
+%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
+%{!?without_lzo:Requires:	liblzo1       >= 1.07}
+%else
+%{!?without_lzo:BuildRequires:	lzo-devel >= 1.07}
+%{!?without_lzo:Requires:	lzo       >= 1.07}
+%endif
+%endif
+
+%{!?without_pam:BuildRequires:	pam-devel}
+%{!?without_pam:Requires:	pam}
+
+%{?with_pkcs11:BuildRequires:	pkcs11-helper-devel}
+%{?with_pkcs11:Requires:	pkcs11-helper}
+
+#
+# Description
+#
+
+%description
+OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+OpenVPN supports SSL/TLS security,
+ethernet bridging,
+TCP or UDP tunnel transport through proxies or NAT,
+support for dynamic IP addresses and DHCP,
+scalability to hundreds or thousands of users,
+and portability to most major OS platforms.
+
+%package devel
+Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+Group:		Applications/Internet
+Requires:	%{name}
+%description devel
+Development support for OpenVPN.
+
+#
+# Define vendor type
+#
+
+%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc"
+%define VENDOR SuSE
+%else
+%define VENDOR %_vendor
+%endif
+
+#
+# Other definitions
+#
+
+%define debug_package %{nil}
+
+#
+# Build OpenVPN binary
+#
+
+%prep
+%setup -q
+
+%build
+%configure \
+	--disable-dependency-tracking \
+	--docdir="%{_docdir}/%{name}-%{version}" \
+	%{?with_password_save:--enable-password-save} \
+	%{!?without_lzo:--enable-lzo} \
+	%{?with_pkcs11:--enable-pkcs11} \
+	%{?without_pam:--disable-plugin-auth-pam}
+%__make
+
+#
+# Installation section
+#
+
+%install
+[ %{buildroot} != "/" ] && rm -rf %{buildroot}
+%__make install DESTDIR="%{buildroot}"
+
+# Install init script
+%if "%{VENDOR}" == "SuSE"
+%__install -c -d -m 755 "%{buildroot}/etc/init.d"
+%__install -c -m 755 "distro/rpm/%{name}.init.d.suse" "%{buildroot}/etc/init.d/%{name}"
+%else
+%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d"
+%__install -c -m 755 distro/rpm/%{name}.init.d.rhel "%{buildroot}/etc/rc.d/init.d/%{name}"
+%endif
+
+# Install /etc/openvpn
+%__install -c -d -m 755 "%{buildroot}/etc/%{name}"
+
+# Install extra %doc stuff
+cp -r AUTHORS ChangeLog NEWS contrib/ sample/ \
+	"%{buildroot}/%{_docdir}/%{name}-%{version}"
+
+#
+# Clean section
+#
+
+%clean
+[ %{buildroot} != "/" ] && rm -rf "%{buildroot}"
+
+#
+# On Linux 2.4, make the device node
+#
+
+%post
+case "`uname -r`" in
+2.4*)
+	/bin/mkdir /dev/net >/dev/null 2>&1
+	/bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1
+	;;
+esac
+
+#
+# Handle the init script
+#
+
+/sbin/chkconfig --add %{name}
+%if "%{VENDOR}" == "SuSE"
+/etc/init.d/openvpn restart
+%else
+/sbin/service %{name} condrestart
+%endif
+%preun
+if [ "$1" = 0 ]
+then
+	%if "%{VENDOR}" == "SuSE"
+	/etc/init.d/openvpn stop
+	%else
+	/sbin/service %{name} stop
+	%endif
+	/sbin/chkconfig --del %{name}
+fi
+
+#
+# Files section
+#
+# don't use %doc as old rpmbuild removes it[1].
+# [1] http://rpm.org/ticket/836
+
+%files
+%defattr(-,root,root)
+%{_mandir}
+%{_sbindir}/%{name}
+%{_libdir}/%{name}
+%{_docdir}/%{name}-%{version}
+%dir /etc/%{name}
+%if "%{VENDOR}" == "SuSE"
+/etc/init.d/%{name}
+%else
+/etc/rc.d/init.d/%{name}
+%endif
+
+%files devel
+%defattr(-,root,root)
+%{_includedir}/*
+
+%changelog
+* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net>
+- Removed management/ directory from %doc
+
+* Thu Dec 14 2006 Alon Bar-Lev
+- Added with_pkcs11
+
+* Mon Aug 2 2005 James Yonan
+- Fixed build problem with --define 'without_pam 1'
+
+* Mon Apr 4 2005 James Yonan
+- Moved some files from /usr/share/openvpn to %doc for compatibility
+  with Dag Wieers' RPM repository
+
+* Sat Mar 12 2005 Tom Walsh
+- Added MandrakeSoft liblzo1 require
+
+* Fri Dec 10 2004 James Yonan
+- Added AutoReq: 0 for manual dependencies
+
+* Fri Dec 10 2004 James Yonan
+- Packaged the plugins
+
+* Sun Nov 7 2004 Umberto Nicoletti
+- SuSE support
+
+* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca>
+- restrict what we claim in /etc/ to avoid ownership conflicts
+
+* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1.
+- Have the version number filled in by autoconf.
+
+* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1
+- Fixed %preun to only remove service on final uninstall
+
+* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1
+- Added condrestart to openvpn.spec & openvpn.init.
+
+* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1
+- Added mknod for Linux 2.4.
+
+* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2
+- Added init scripts
+- Added conf file support
+
+* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1
+- Added new directories for config examples and such
+
+* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1
+- Updated buildroot directive and cleanup command
+- added easy-rsa utilities
+
+* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1
+- Initial build.
diff --git a/distro/rpm/openvpn.spec.in b/distro/rpm/openvpn.spec.in
new file mode 100644
index 0000000..20a8c89
--- /dev/null
+++ b/distro/rpm/openvpn.spec.in
@@ -0,0 +1,248 @@
+# OpenVPN spec file, used to drive rpmbuild
+
+# OPTIONS
+#
+# Disable LZO
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1'
+#
+# Disable PAM plugin
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1'
+#
+# Allow passwords to be read from files
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1'
+
+Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+Name:		@PACKAGE@
+Version:	@VERSION@
+Release:	1
+URL:		http://openvpn.net/
+Source0:	http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz
+
+License:	GPL
+Group:		Applications/Internet
+Vendor:		James Yonan <jim@yonan.net>
+Packager:	James Yonan <jim@yonan.net>
+BuildRoot:	%{_tmppath}/%{name}-%(id -un)
+
+#
+# Include dependencies manually
+#
+
+AutoReq: 0
+
+BuildRequires:	openssl-devel >= 0.9.7
+Requires:	openssl       >= 0.9.7
+
+%if "%{_vendor}" == "Mandrakesoft"
+%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
+%{!?without_lzo:Requires:	liblzo1       >= 1.07}
+%else
+%if "%{_vendor}" == "MandrakeSoft"
+%{!?without_lzo:BuildRequires:	liblzo1-devel >= 1.07}
+%{!?without_lzo:Requires:	liblzo1       >= 1.07}
+%else
+%{!?without_lzo:BuildRequires:	lzo-devel >= 1.07}
+%{!?without_lzo:Requires:	lzo       >= 1.07}
+%endif
+%endif
+
+%{!?without_pam:BuildRequires:	pam-devel}
+%{!?without_pam:Requires:	pam}
+
+%{?with_pkcs11:BuildRequires:	pkcs11-helper-devel}
+%{?with_pkcs11:Requires:	pkcs11-helper}
+
+#
+# Description
+#
+
+%description
+OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+OpenVPN supports SSL/TLS security,
+ethernet bridging,
+TCP or UDP tunnel transport through proxies or NAT,
+support for dynamic IP addresses and DHCP,
+scalability to hundreds or thousands of users,
+and portability to most major OS platforms.
+
+%package devel
+Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+Group:		Applications/Internet
+Requires:	%{name}
+%description devel
+Development support for OpenVPN.
+
+#
+# Define vendor type
+#
+
+%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc"
+%define VENDOR SuSE
+%else
+%define VENDOR %_vendor
+%endif
+
+#
+# Other definitions
+#
+
+%define debug_package %{nil}
+
+#
+# Build OpenVPN binary
+#
+
+%prep
+%setup -q
+
+%build
+%configure \
+	--disable-dependency-tracking \
+	--docdir="%{_docdir}/%{name}-%{version}" \
+	%{?with_password_save:--enable-password-save} \
+	%{!?without_lzo:--enable-lzo} \
+	%{?with_pkcs11:--enable-pkcs11} \
+	%{?without_pam:--disable-plugin-auth-pam}
+%__make
+
+#
+# Installation section
+#
+
+%install
+[ %{buildroot} != "/" ] && rm -rf %{buildroot}
+%__make install DESTDIR="%{buildroot}"
+
+# Install init script
+%if "%{VENDOR}" == "SuSE"
+%__install -c -d -m 755 "%{buildroot}/etc/init.d"
+%__install -c -m 755 "distro/rpm/%{name}.init.d.suse" "%{buildroot}/etc/init.d/%{name}"
+%else
+%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d"
+%__install -c -m 755 distro/rpm/%{name}.init.d.rhel "%{buildroot}/etc/rc.d/init.d/%{name}"
+%endif
+
+# Install /etc/openvpn
+%__install -c -d -m 755 "%{buildroot}/etc/%{name}"
+
+# Install extra %doc stuff
+cp -r AUTHORS ChangeLog NEWS contrib/ sample/ \
+	"%{buildroot}/%{_docdir}/%{name}-%{version}"
+
+#
+# Clean section
+#
+
+%clean
+[ %{buildroot} != "/" ] && rm -rf "%{buildroot}"
+
+#
+# On Linux 2.4, make the device node
+#
+
+%post
+case "`uname -r`" in
+2.4*)
+	/bin/mkdir /dev/net >/dev/null 2>&1
+	/bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1
+	;;
+esac
+
+#
+# Handle the init script
+#
+
+/sbin/chkconfig --add %{name}
+%if "%{VENDOR}" == "SuSE"
+/etc/init.d/openvpn restart
+%else
+/sbin/service %{name} condrestart
+%endif
+%preun
+if [ "$1" = 0 ]
+then
+	%if "%{VENDOR}" == "SuSE"
+	/etc/init.d/openvpn stop
+	%else
+	/sbin/service %{name} stop
+	%endif
+	/sbin/chkconfig --del %{name}
+fi
+
+#
+# Files section
+#
+# don't use %doc as old rpmbuild removes it[1].
+# [1] http://rpm.org/ticket/836
+
+%files
+%defattr(-,root,root)
+%{_mandir}
+%{_sbindir}/%{name}
+%{_libdir}/%{name}
+%{_docdir}/%{name}-%{version}
+%dir /etc/%{name}
+%if "%{VENDOR}" == "SuSE"
+/etc/init.d/%{name}
+%else
+/etc/rc.d/init.d/%{name}
+%endif
+
+%files devel
+%defattr(-,root,root)
+%{_includedir}/*
+
+%changelog
+* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net>
+- Removed management/ directory from %doc
+
+* Thu Dec 14 2006 Alon Bar-Lev
+- Added with_pkcs11
+
+* Mon Aug 2 2005 James Yonan
+- Fixed build problem with --define 'without_pam 1'
+
+* Mon Apr 4 2005 James Yonan
+- Moved some files from /usr/share/openvpn to %doc for compatibility
+  with Dag Wieers' RPM repository
+
+* Sat Mar 12 2005 Tom Walsh
+- Added MandrakeSoft liblzo1 require
+
+* Fri Dec 10 2004 James Yonan
+- Added AutoReq: 0 for manual dependencies
+
+* Fri Dec 10 2004 James Yonan
+- Packaged the plugins
+
+* Sun Nov 7 2004 Umberto Nicoletti
+- SuSE support
+
+* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca>
+- restrict what we claim in /etc/ to avoid ownership conflicts
+
+* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1.
+- Have the version number filled in by autoconf.
+
+* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1
+- Fixed %preun to only remove service on final uninstall
+
+* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1
+- Added condrestart to openvpn.spec & openvpn.init.
+
+* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1
+- Added mknod for Linux 2.4.
+
+* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2
+- Added init scripts
+- Added conf file support
+
+* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1
+- Added new directories for config examples and such
+
+* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1
+- Updated buildroot directive and cleanup command
+- added easy-rsa utilities
+
+* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1
+- Initial build.