New upstream version 2.5~beta3upstream/2.5_beta3

16 files changed, 532 insertions, 1604 deletions

diff --git a/doc/doxygen/Makefile.in b/doc/doxygen/Makefile.in
new file mode 100644
index 0000000..b1f3786
--- /dev/null
+++ b/doc/doxygen/Makefile.in
@@ -0,0 +1,532 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2017-2018 Fox-IT B.V. <openvpn@fox-it.com>
+#
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc/doxygen
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \
+	$(top_srcdir)/m4/ax_socklen_t.m4 \
+	$(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \
+	$(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h \
+	$(top_builddir)/include/openvpn-plugin.h
+CONFIG_CLEAN_FILES = openvpn.doxyfile
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/openvpn.doxyfile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CMOCKA_CFLAGS = @CMOCKA_CFLAGS@
+CMOCKA_LIBS = @CMOCKA_LIBS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DL_LIBS = @DL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_UNITTESTS = @ENABLE_UNITTESTS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GIT = @GIT@
+GREP = @GREP@
+IFCONFIG = @IFCONFIG@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPROUTE = @IPROUTE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBPAM_CFLAGS = @LIBPAM_CFLAGS@
+LIBPAM_LIBS = @LIBPAM_LIBS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZ4_CFLAGS = @LZ4_CFLAGS@
+LZ4_LIBS = @LZ4_LIBS@
+LZO_CFLAGS = @LZO_CFLAGS@
+LZO_LIBS = @LZO_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MBEDTLS_CFLAGS = @MBEDTLS_CFLAGS@
+MBEDTLS_LIBS = @MBEDTLS_LIBS@
+MKDIR_P = @MKDIR_P@
+NETSTAT = @NETSTAT@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
+OPENVPN_VERSION_MAJOR = @OPENVPN_VERSION_MAJOR@
+OPENVPN_VERSION_MINOR = @OPENVPN_VERSION_MINOR@
+OPENVPN_VERSION_PATCH = @OPENVPN_VERSION_PATCH@
+OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@
+OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@
+OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@
+OPTIONAL_INOTIFY_CFLAGS = @OPTIONAL_INOTIFY_CFLAGS@
+OPTIONAL_INOTIFY_LIBS = @OPTIONAL_INOTIFY_LIBS@
+OPTIONAL_LZ4_CFLAGS = @OPTIONAL_LZ4_CFLAGS@
+OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@
+OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@
+OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@
+OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@
+OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@
+OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@
+OPTIONAL_SYSTEMD_LIBS = @OPTIONAL_SYSTEMD_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+P11KIT_CFLAGS = @P11KIT_CFLAGS@
+P11KIT_LIBS = @P11KIT_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@
+PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PLUGINDIR = @PLUGINDIR@
+PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@
+PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+ROUTE = @ROUTE@
+RST2HTML = @RST2HTML@
+RST2MAN = @RST2MAN@
+SED = @SED@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOCKETS_LIBS = @SOCKETS_LIBS@
+STRIP = @STRIP@
+SYSTEMD_ASK_PASSWORD = @SYSTEMD_ASK_PASSWORD@
+SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@
+TAP_CFLAGS = @TAP_CFLAGS@
+TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@
+TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@
+TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
+TEST_CFLAGS = @TEST_CFLAGS@
+TEST_LDFLAGS = @TEST_LDFLAGS@
+TMPFILES_DIR = @TMPFILES_DIR@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libsystemd_CFLAGS = @libsystemd_CFLAGS@
+libsystemd_LIBS = @libsystemd_LIBS@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+plugindir = @plugindir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sampledir = @sampledir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdunitdir = @systemdunitdir@
+target_alias = @target_alias@
+tmpfilesdir = @tmpfilesdir@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+DISTCLEANFILES = openvpn.doxyfile
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/doxygen/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/doxygen/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+openvpn.doxyfile: $(top_builddir)/config.status $(srcdir)/openvpn.doxyfile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	clean-local cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+.PHONY: doxygen
+doxygen: openvpn.doxyfile
+	doxygen openvpn.doxyfile
+
+clean-local:
+	-rm -rf html latex
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/doxygen/doc_compression.h b/doc/doxygen/doc_compression.h
deleted file mode 100644
index 3176bad..0000000
--- a/doc/doxygen/doc_compression.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file Data Channel Compression module documentation file.
- */
-
-/**
- * @defgroup compression Data Channel Compression module
- *
- * This module offers compression of data channel packets.
- *
- * @par State structures
- * The Data Channel Compression module stores its internal state in a \c
- * lzo_compress_workspace structure.  This state includes flags which
- * control the module's behavior and preallocated working memory.  One
- * such structure is present for each VPN tunnel, and is stored in the \c
- * context.c2.lzo_compwork of the \c context associated with that VPN
- * tunnel.
- *
- * @par Initialization and cleanup
- * Every time a new \c lzo_compress_workspace is needed, it must be
- * initialized using the \c lzo_compress_init() function.  Similarly,
- * every time a \c lzo_compress_workspace is no longer needed, it must be
- * cleaned up using the \c lzo_compress_uninit() function.  These
- * functions take care of the allocation and freeing of internal working
- * memory, but not of the \c lzo_compress_workspace structures themselves.
- *
- * @par
- * Because of the one-to-one relationship between \c
- * lzo_compress_workspace structures and VPN tunnels, the above-mentioned
- * initialization and cleanup functions are called directly from the \c
- * init_instance() and \c close_instance() functions, which control the
- * initialization and cleanup of VPN tunnel instances and their associated
- * \c context structures.
- *
- * @par Packet processing functions
- * This module receives data channel packets from the \link data_control
- * Data Channel Control module\endlink and processes them according to the
- * settings of the packet's VPN tunnel.  The \link data_control Data
- * Channel Control module\endlink uses the following interface functions:
- * - For packets which will be sent to a remote OpenVPN peer: \c
- *   lzo_compress()
- * - For packets which have been received from a remote OpenVPN peer: \c
- *   lzo_decompress()
- *
- * @par Settings that control this module's activity
- * Whether or not the Data Channel Compression module is active depends on
- * the compile-time \c ENABLE_LZO preprocessor macro and the runtime flags
- * stored in \c lzo_compress_workspace.flags of the associated VPN tunnel.
- * The latter are initialized from \c options.lzo, which gets its value
- * from the process's configuration sources, such as its configuration
- * file or command line %options.
- *
- * @par Adaptive compression
- * The compression module supports adaptive compression.  If this feature
- * is enabled, the compression routines monitor their own performance and
- * turn compression on or off depending on whether it is leading to
- * significantly reduced payload size.
- *
- * @par Compression algorithms
- * This module uses the Lempel-Ziv-Oberhumer (LZO) compression algorithms.
- * These offer lossless compression and are designed for high-performance
- * decompression.  This module uses the external \c lzo library's
- * implementation of the algorithms.
- *
- * @par
- * For more information on the LZO library, see:\n
- * http://www.oberhumer.com/opensource/lzo/
- */
diff --git a/doc/doxygen/doc_control_processor.h b/doc/doxygen/doc_control_processor.h
deleted file mode 100644
index 1bbf2d2..0000000
--- a/doc/doxygen/doc_control_processor.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Control Channel Processor module documentation file.
- */
-
-/**
- * @defgroup control_processor Control Channel Processor module
- *
- * This module controls the setup and maintenance of VPN tunnels and the
- * associated security parameters.
- *
- * @par This module's role
- * The Control Channel Processor module lies at the core of OpenVPN's
- * activities.  It handles the setup of new VPN tunnels, the negotiation
- * of data channel security parameters, the managing of active VPN
- * tunnels, and finally the cleanup of expired VPN tunnels.
- *
- * @par State structures
- * A large amount of VPN tunnel state information must be stored within an
- * OpenVPN process.  A wide variety of container structures are used by
- * this module for that purpose.  Several of these structures are listed
- * below, and the function of the first three VPN tunnel state containers
- * is described in more detail later.
- *  - VPN tunnel state containers:
- *     - \c tls_multi, security parameter state for a single VPN tunnel.
- *       Contains three instances of the \c tls_session structure.
- *     - \c tls_session, security parameter state of a single session
- *       within a VPN tunnel.  Contains two instances of the \c key_state
- *       structure.
- *     - \c key_state, security parameter state of one TLS and data
- *       channel %key set.
- *  - Data channel security parameter containers:
- *     - \c key_ctx_bi, container for two sets of OpenSSL cipher and/or
- *       HMAC context (both directions).  Contains two instances of the \c
- *       key_ctx structure.
- *     - \c key_ctx, container for one set of OpenSSL cipher and/or HMAC
- *       context (one directions.
- *  - Key material containers:
- *     - \c key2, container for two sets of cipher and/or HMAC %key
- *       material (both directions).  Contains two instances of the \c key
- *       structure.
- *     - \c key, container for one set of cipher and/or HMAC %key material
- *       (one direction).
- *     - \c key_direction_state, ordering of %key material within the \c
- *       key2.key array.
- *  - Key method 2 random material containers:
- *     - \c key_source2, container for both halves of random material used
- *       for %key method 2.  Contains two instances of the \c key_source
- *       structure.
- *     - \c key_source, container for one half of random material used for
- *       %key method 2.
- *
- * @par The life of a \c tls_multi object
- * A \c tls_multi structure contains all the security parameter state
- * information related to the control and data channels of one VPN tunnel.
- * Its life cycle can be summarized as follows:
- *  -# Initialization: \c tls_multi_init() and \c
- *     tls_multi_init_finalize(), which are called (indirectly) from \c
- *     init_instance() when initializing a new \c context structure.
- *     - Initializes a \c tls_multi structure.
- *     - Allocates the three \c tls_session objects contained by the \c
- *       tls_multi structure, and initializes as appropriate.
- *  -# Management: \c tls_multi_process() and \c tls_pre_decrypt()
- *     - If a new session is initiated by the remote peer, then \c
- *       tls_pre_decrypt() starts the new session negotiation in the
- *       un-trusted \c tls_session.
- *     - If the, as yet, un-trusted \c tls_session authenticates
- *       successfully, then \c tls_multi_process() moves it so as to be
- *       the active \c tls_session.
- *     - If an error occurs during processing of a \c key_state object,
- *       then \c tls_multi_process() cleans up and initializes the
- *       associated \c tls_session object.  If the error occurred in the
- *       active \c key_state of the active \c tls_session and the
- *       lame-duck \c key_state of that \c tls_session has not yet
- *       expired, it is preserved as fallback.
- *  -# Cleanup: \c tls_multi_free(), which is called (indirectly) from \c
- *     close_instance() when cleaning up a \c context structure.
- *     - Cleans up a \c tls_multi structure.
- *     - Cleans up the three \c tls_session objects contained by the \c
- *       tls_multi structure.
- *
- * @par The life of a \c tls_session object
- * A \c tls_session structure contains the state information related to an
- * active and a lame-duck \c key_state.  Its life cycle can be summarized
- * as follows:
- *  -# Initialization: \c tls_session_init()
- *     - Initializes a \c tls_session structure.
- *     - Initializes the primary \c key_state by calling \c
- *       key_state_init().
- *  -# Renegotiation: \c key_state_soft_reset()
- *     - Cleans up the old lame-duck \c key_state by calling \c
- *       key_state_free().
- *     - Moves the old primary \c key_state to be the new lame-duck \c
- *       key_state.
- *     - Initializes a new primary \c key_state by calling \c
- *       key_state_init().
- *  -# Cleanup: \c tls_session_free()
- *     - Cleans up a \c tls_session structure.
- *     - Cleans up all \c key_state objects associated with the session by
- *       calling \c key_state_free() for each.
- *
- * @par The life of a \c key_state object
- * A \c key_state structure represents one control and data channel %key
- * set.  It contains an OpenSSL TLS object that encapsulates the control
- * channel, and the data channel security parameters needed by the \link
- * data_crypto Data Channel Crypto module\endlink to perform cryptographic
- * operations on data channel packets.  Its life cycle can be summarized
- * as follows:
- *  -# Initialization: \c key_state_init()
- *     - Initializes a \c key_state structure.
- *     - Creates a new OpenSSL TLS object to encapsulate this new control
- *       channel session.
- *     - Sets \c key_state.state to \c S_INITIAL.
- *     - Allocates several internal buffers.
- *     - Initializes new reliability layer structures for this key set.
- *  -# Negotiation: \c tls_process()
- *     - The OpenSSL TLS object negotiates a TLS session between itself
- *       and the remote peer's TLS object.
- *     - Key material is generated and exchanged through the TLS session
- *       between OpenVPN peers.
- *     - Both peers initialize their data channel cipher and HMAC key
- *       contexts.
- *     - On successful negotiation, the \c key_state.state will progress
- *       from \c S_INITIAL to \c S_ACTIVE and \c S_NORMAL.
- *  -# Active tunneling: \link data_crypto Data Channel Crypto
- *     module\endlink
- *     - Data channel packet to be sent to a remote OpenVPN peer:
- *        - \c tls_pre_encrypt() loads the security parameters from the \c
- *          key_state into a \c crypto_options structure.
- *        - \c openvpn_encrypt() uses the \c crypto_options to an encrypt
- *          and HMAC sign the data channel packet.
- *     - Data channel packet received from a remote OpenVPN peer:
- *        - \c tls_pre_decrypt() loads the security parameters from the \c
- *          key_state into a \c crypto_options structure.
- *        - \c openvpn_encrypt() uses the \c crypto_options to
- *          authenticate and decrypt the data channel packet.
- *  -# Cleanup: \c key_state_free()
- *     - Cleans up a \c key_state structure together with its OpenSSL TLS
- *       object, key material, internal buffers, and reliability layer
- *       structures.
- *
- * @par Control functions
- * The following two functions drive the Control Channel Processor's
- * activities.
- *  - \c tls_multi_process(), iterates through the \c tls_session objects
- *    within a given \c tls_multi of a VPN tunnel, and calls \c
- *    tls_process() for each \c tls_session which is being set up, is
- *    already active, or is busy expiring.
- *  - \c tls_process(), performs the Control Channel Processor module's
- *    core handling of received control channel messages, and generates
- *    appropriate messages to be sent.
- *
- * @par Functions which control data channel key generation
- *  - Key method 1 key exchange functions were removed from OpenVPN 2.5
- *  - Key method 2 key exchange functions:
- *     - \c key_method_2_write(), generates and processes key material to
- *       be sent to the remote OpenVPN peer.
- *     - \c key_method_2_read(), processes key material received from the
- *       remote OpenVPN peer.
- */
diff --git a/doc/doxygen/doc_control_tls.h b/doc/doxygen/doc_control_tls.h
deleted file mode 100644
index 5cb7c53..0000000
--- a/doc/doxygen/doc_control_tls.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Control Channel TLS module documentation file.
- */
-
-/**
- * @defgroup control_tls Control Channel TLS module
- *
- * This module provides secure encapsulation of control channel messages
- * exchanged between OpenVPN peers.
- *
- * The Control Channel TLS module uses the Transport Layer Security (TLS)
- * protocol to provide an encrypted communication channel between the
- * local OpenVPN process and a remote peer.  This protocol simultaneously
- * offers certificate-based authentication of the communicating parties.
- *
- * @par This module's roles
- * The Control Channel TLS module is essential for the security of any
- * OpenVPN-based system.  On the one hand, it performs the security
- * operations necessary to protect control channel messages exchanged
- * between OpenVPN peers.  On the other hand, before the control and data
- * channels are even setup, it controls the exchange of certificates and
- * verification of the remote's identity during negotiation of VPN
- * tunnels.
- *
- * @par
- * The former role is described below.  The latter is described in the
- * documentation for the \c verify_callback() function.
- *
- * @par
- * In other words, this module takes care of the confidentiality and
- * integrity of data channel communications, and the authentication of
- * both the communicating parties and the control channel messages
- * exchanged.
- *
- * @par Initialization and cleanup
- * Because of the one-to-one relationship between control channel TLS
- * state and \c key_state structures, the initialization and cleanup of an
- * instance of the Control Channel TLS module's state happens within the
- * \c key_state_init() and \c key_state_free() functions.  In other words,
- * each \c key_state object contains exactly one OpenSSL SSL-BIO object,
- * which is initialized and cleaned up together with the rest of the \c
- * key_state object.
- *
- * @par Packet processing functions
- * This object behaves somewhat like a black box with a ciphertext and a
- * plaintext I/O port. Its interaction with OpenVPN's control channel
- * during operation takes place within the \c tls_process() function of
- * the \link control_processor Control Channel Processor\endlink.  The
- * following functions are available for processing packets:
- * - If ciphertext received from the remote peer is available in the \link
- *   reliable Reliability Layer\endlink:
- *   - Insert it into the ciphertext-side of the SSL-BIO.
- *   - Use function: \c key_state_write_ciphertext()
- * - If ciphertext can be extracted from the ciphertext-side of the
- *   SSL-BIO:
- *   - Pass it to the \link reliable Reliability Layer\endlink for sending
- *     to the remote peer.
- *   - Use function: \c key_state_read_ciphertext()
- * - If plaintext can be extracted from the plaintext-side of the SSL-BIO:
- *   - Pass it on to the \link control_processor Control Channel
- *     Processor\endlink for local processing.
- *   - Use function: \c key_state_read_plaintext()
- * - If plaintext from the \link control_processor Control Channel
- *   Processor\endlink is available to be sent to the remote peer:
- *   - Insert it into the plaintext-side of the SSL-BIO.
- *   - Use function: \c key_state_write_plaintext() or \c
- *     key_state_write_plaintext_const()
- *
- * @par Transport Layer Security protocol implementation
- * This module uses the OpenSSL library's implementation of the TLS
- * protocol in the form of an OpenSSL SSL-BIO object.
- *
- * @par
- * For more information on the OpenSSL library's BIO objects, please see:
- *  - OpenSSL's generic BIO objects:
- *    http://www.openssl.org/docs/crypto/bio.html
- *  - OpenSSL's SSL-BIO object:
- *    http://www.openssl.org/docs/crypto/BIO_f_ssl.html
- */
diff --git a/doc/doxygen/doc_data_control.h b/doc/doxygen/doc_data_control.h
deleted file mode 100644
index ad2a308..0000000
--- a/doc/doxygen/doc_data_control.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Data Channel Control module documentation file.
- */
-
-/**
- * @defgroup data_control Data Channel Control module
- *
- * This module controls the processing of packets as they pass through the
- * data channel.
- *
- * The Data Channel Control module controls the processing of packets as
- * they pass through the data channel.  The processing includes packet
- * compression, fragmentation, and the performing of security operations
- * on the packets.  This module does not do the processing itself, but
- * passes the packet to other data channel modules to perform the
- * appropriate actions.
- *
- * Packets can travel in two directions through the data channel.  They
- * can be going to a remote destination which is reachable through a VPN
- * tunnel, in which case this module prepares them to be sent out through
- * a VPN tunnel.  On the other hand, they can have been received through a
- * VPN tunnel from a remote OpenVPN peer, in which case this module
- * retrieves the packet in its original form as it was before entering the
- * VPN tunnel on the remote OpenVPN peer.  How this module processes
- * packets traveling in the two directions is discussed in more detail
- * below.
- *
- * @par Packets to be sent to a remote OpenVPN peer
- * This module's main function for processing packets traveling in this
- * direction is \c encrypt_sign(), which performs the following processing
- * steps:
- * - Call the \link compression Data Channel Compression module\endlink to
- *   perform packet compression if necessary.
- * - Call the \link fragmentation Data Channel Fragmentation
- *   module\endlink to perform packet fragmentation if necessary.
- * - Call the \link data_crypto Data Channel Crypto module\endlink to
- *   perform the required security operations.
- *
- * @par
- * See the \c encrypt_sign() documentation for details of these
- * interactions.
- *
- * @par
- * After the above processing is complete, the packet is ready to be sent
- * to a remote OpenVPN peer as a VPN tunnel packet.  The actual sending of
- * the packet is handled by the \link external_multiplexer External
- * Multiplexer\endlink.
- *
- * @par Packets received from a remote OpenVPN peer
- * The function that controls how packets traveling in this direction are
- * processed is \c process_incoming_link().  That function, however, also
- * performs some of the tasks required for the \link external_multiplexer
- * External Multiplexer\endlink and is therefore listed as part of that
- * module, instead of here.
- *
- * @par
- * After the \c process_incoming_link() function has determined that a
- * received packet is a data channel packet, it performs the following
- * processing steps:
- * - Call the \link data_crypto Data Channel Crypto module\endlink to
- *   perform the required security operations.
- * - Call the \link fragmentation Data Channel Fragmentation
- *   module\endlink to perform packet reassembly if necessary.
- * - Call the \link compression Data Channel Compression module\endlink to
- *   perform packet decompression if necessary.
- *
- * @par
- * See the \c process_incoming_link() documentation for details of these
- * interactions.
- *
- * @par
- * After the above processing is complete, the packet is in its original
- * form again as it was received by the remote OpenVPN peer.  It can now
- * be routed further to its final destination.  If that destination is a
- * locally reachable host, then the \link internal_multiplexer Internal
- * Multiplexer\endlink will send it there.
- */
diff --git a/doc/doxygen/doc_data_crypto.h b/doc/doxygen/doc_data_crypto.h
deleted file mode 100644
index 3828089..0000000
--- a/doc/doxygen/doc_data_crypto.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Data Channel Crypto module documentation file.
- */
-
-/**
- * @addtogroup data_crypto Data Channel Crypto module
- *
- * The Data Channel Crypto Module performs cryptographic operations on
- * data channel packets.
- *
- * @par Security parameters
- * This module is merely the user of a VPN tunnel's security parameters.
- * It does not perform the negotiation and setup of the security
- * parameters, nor the %key generation involved.  These actions are done
- * by the \link control_processor Control Channel Processor\endlink.  This
- * module receives the appropriate security parameters from that module in
- * the form of a \c crypto_options structure when they are necessary for
- * processing a packet.
- *
- * @par Packet processing functions
- * This module receives data channel packets from the \link data_control
- * Data Channel Control module\endlink and processes them according to the
- * security parameters of the packet's VPN tunnel.  The \link data_control
- * Data Channel Control module\endlink uses the following interface
- * functions:
- *  - For packets which will be sent to a remote OpenVPN peer:
- *     - \c tls_pre_encrypt()
- *     - \c openvpn_encrypt()
- *     - \c tls_post_encrypt()
- *  - For packets which have been received from a remote OpenVPN peer:
- *     - \c tls_pre_decrypt() (documented as part of the \link
- *       external_multiplexer External Multiplexer\endlink)
- *     - \c openvpn_decrypt()
- *
- * @par Settings that control this module's activity
- * How the data channel processes packets received from the \link data_control
- * Data Channel Control module\endlink at runtime depends on the associated
- * \c crypto_options structure.  To perform cryptographic operations, the
- * \c crypto_options.key_ctx_bi must contain the correct cipher and HMAC
- * security parameters for the direction the packet is traveling in.
- *
- * @par Crypto algorithms
- * This module uses the crypto algorithm implementations of the external
- * crypto library (currently either OpenSSL (default), or mbed TLS).
- */
diff --git a/doc/doxygen/doc_eventloop.h b/doc/doxygen/doc_eventloop.h
deleted file mode 100644
index 8bd2635..0000000
--- a/doc/doxygen/doc_eventloop.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Main Event Loop module documentation file.
- */
-
-/**
- * @defgroup eventloop Main Event Loop module
- *
- * This main event loop module drives the packet processing of OpenVPN.
- *
- * OpenVPN is an event driven system.  Its activities are driven by a main
- * event loop, which repeatedly waits for one of several predefined events
- * to occur, and then calls the appropriate module to handle the event.
- * The major types of network events that OpenVPN processes are:
- * - A packet can be read from the external network interface.
- *   - The main event loop activates the \link external_multiplexer
- *     External Multiplexer\endlink to read and process the packet.
- * - A packet can be read from the virtual tun/tap network interface.
- *   - The main event loop activates the \link internal_multiplexer
- *     Internal Multiplexer\endlink to read and process the packet.
- * - If a packet is ready to be sent out as a VPN tunnel packet: the
- *   external network interface can be written to.
- *   - The main event loop activates the \link external_multiplexer
- *     External Multiplexer\endlink to send the packet.
- * - If a packet is ready to be sent to a locally reachable destination:
- *   the virtual tun/tap network interface can be written to.
- *   - The main event loop activates the \link internal_multiplexer
- *     Internal Multiplexer\endlink to send the packet.
- *
- * Beside these external events, OpenVPN also processes other types of
- * internal events.  These include scheduled events, such as resending of
- * non-acknowledged control channel messages.
- *
- * @par Main event loop implementations
- *
- * Depending on the mode in which OpenVPN is running, a different main
- * event loop function is called to drive the event processing.  The
- * following implementations are available:
- * - Client mode using UDP or TCP: \c tunnel_point_to_point()
- * - Server mode using UDP: \c tunnel_server_udp_single_threaded()
- * - Server mode using TCP: \c tunnel_server_tcp()
- */
diff --git a/doc/doxygen/doc_external_multiplexer.h b/doc/doxygen/doc_external_multiplexer.h
deleted file mode 100644
index 692c15c..0000000
--- a/doc/doxygen/doc_external_multiplexer.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * External Multiplexer module documentation file.
- */
-
-/**
- * @addtogroup external_multiplexer External Multiplexer module
- *
- * The External Multiplexer is the link between the external network
- * interface and the other OpenVPN modules.  It reads packets from the
- * external network interface, determines which remote OpenVPN peer and
- * VPN tunnel they are associated with, and whether they are data channel
- * or control channel packets.  It then passes the packets on to the
- * appropriate processing module.
- *
- * This module also handles packets traveling in the reverse direction,
- * which have been generated by the local control channel or which have
- * already been processed by the \link data_control Data Channel Control
- * module\endlink and are destined for a remote host reachable through a
- * VPN tunnel.
- */
diff --git a/doc/doxygen/doc_fragmentation.h b/doc/doxygen/doc_fragmentation.h
deleted file mode 100644
index 90e8d9e..0000000
--- a/doc/doxygen/doc_fragmentation.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Data Channel Fragmentation module documentation file.
- */
-
-/**
- * @defgroup fragmentation Data Channel Fragmentation module
- *
- * The Data Channel Fragmentation module offers fragmentation of data
- * channel packets.
- *
- * @par State structures
- * The Data Channel Fragmentation module stores its internal state in a \c
- * fragment_master structure.  One such structure is present for each VPN
- * tunnel, and is stored in \c context.c2.fragment of the \c context
- * associated with that VPN tunnel.
- *
- * @par
- * The \c fragment_master structure contains one \c fragment_list
- * structure \c fragment_master.incoming.  This is a list of \c fragment
- * structures, each of which can store the parts of one fragmented packet
- * while it is being reassembled.  The \c fragment_master structure also
- * contains one \c buffer called \c fragment_master.outgoing, in which a
- * data channel large packet to be sent to a remote OpenVPN peer can be
- * broken up into parts to be sent one by one.
- *
- * @par Initialization and cleanup
- * Every time a new \c fragment_master is needed, it must be allocated and
- * initialized by the \c fragment_init() function.  Similarly, every time
- * a \c fragment_master is no longer needed, it must be cleaned up using
- * the \c fragment_free() function.  These functions take care of the
- * allocation and freeing of the \c fragment_master structure itself and
- * all internal memory required for the use of that structure.  Note that
- * this behavior is different from that displayed by the \link compression
- * Data Channel Compression module\endlink.
- *
- * @par
- * Because of the one-to-one relationship between \c fragment_master
- * structures and VPN tunnels, the above-mentioned initialization and
- * cleanup functions are called directly from the \c init_instance() and
- * \c close_instance() functions, which control the initialization and
- * cleanup of VPN tunnel instances and their associated \c context
- * structures.
- *
- * @par Packet processing functions
- * This module receives data channel packets from the \link data_control
- * Data Channel Control module\endlink and processes them according to the
- * settings of the packet's VPN tunnel.  The \link data_control Data
- * Channel Control module\endlink uses the following interface functions:
- * - For packets which will be sent to a remote OpenVPN peer: \c
- *   fragment_outgoing() \n This function inspects data channel packets as
- *   they are being made ready to be sent as VPN tunnel packets to a
- *   remote OpenVPN peer.  If a packet's size is larger than its
- *   destination VPN tunnel's maximum transmission unit (MTU), then this
- *   module breaks that packet up into smaller parts, each of which is
- *   smaller than or equal to the VPN tunnel's MTU.  See \c
- *   fragment_outgoing() for details.
- * - For packets which have been received from a remote OpenVPN peer: \c
- *   fragment_incoming() \n This function inspects data channel packets
- *   that have been received from a remote OpenVPN peer through a VPN
- *   tunnel.  It reads the fragmentation header of the packet, and
- *   depending on its value performs the appropriate action.  See \c
- *   fragment_incoming() for details.
- *
- * @par Settings that control this module's activity
- * Whether the Data Channel Fragmentation module is active or not depends
- * on the compile-time \c ENABLE_FRAGMENT preprocessor macro and the
- * runtime flag \c options.fragment, which gets its value from the
- * process's configuration sources, such as the configuration file and
- * commandline %options.
- */
diff --git a/doc/doxygen/doc_internal_multiplexer.h b/doc/doxygen/doc_internal_multiplexer.h
deleted file mode 100644
index c68a09c..0000000
--- a/doc/doxygen/doc_internal_multiplexer.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Internal Multiplexer module documentation file.
- */
-
-/**
- * @addtogroup internal_multiplexer Internal Multiplexer module
- *
- * The Internal Multiplexer is the link between the virtual tun/tap
- * network interface and the \link data_control Data Channel Control
- * module\endlink.  It reads packets from the virtual network interface,
- * determines for which remote OpenVPN peer they are destined, and then
- * passes the packets on to the Data Channel Control module together with
- * information about their destination VPN tunnel instance.
- *
- * This module also handles packets traveling in the reverse direction,
- * which have already been processed by the Data Channel Control module
- * and are destined for a locally reachable host.
- */
diff --git a/doc/doxygen/doc_key_generation.h b/doc/doxygen/doc_key_generation.h
deleted file mode 100644
index 4bb9c70..0000000
--- a/doc/doxygen/doc_key_generation.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Key generation documentation file.
- */
-
-/**
- * @page key_generation Data channel %key generation
- *
- * This section describes how OpenVPN peers generate and exchange %key
- * material necessary for the security operations performed on data
- * channel packets.
- *
- * The %key generation and exchange process between OpenVPN client and
- * server occurs every time data channel security parameters are
- * negotiated, for example during the initial setup of a VPN tunnel or
- * when the active security parameters expire.  In source code terms, this
- * is when a new key_state structure is initialized.
- *
- * @section key_generation_method Key methods
- *
- * OpenVPN supports two different ways of generating and exchanging %key
- * material between client and server.  These are known as %key method 1
- * and %key method 2.  %Key method 2 is the recommended method. Both are
- * explained below.
- *
- * @subsection key_generation_method_1 Key method 1
- *
- * -# Each host generates its own random material.
- * -# Each host uses its locally generated random material as %key data
- *    for encrypting and signing packets sent to the remote peer.
- * -# Each host then sends its random material to the remote peer, so that
- *    the remote peer can use that %key data for authenticating and
- *    decrypting received packets.
- *
- * @subsection key_generation_method_2 Key method 2
- *
- * -# The client generates random material in the following amounts:
- *    - Pre-master secret: 48 bytes
- *    - Client's PRF seed for master secret: 32 bytes
- *    - Client's PRF seed for %key expansion: 32 bytes
- * -# The client sends its share of random material to the server.
- * -# The server generates random material in the following amounts:
- *    - Server's PRF seed for master secret: 32 bytes
- *    - Server's PRF seed for %key expansion: 32 bytes
- * -# The server computes the %key expansion using its own and the
- *    client's random material.
- * -# The server sends its share of random material to the client.
- * -# The client computes the %key expansion using its own and the
- *    server's random material.
- *
- * %Key method 2 %key expansion is performed by the \c
- * generate_key_expansion() function.  Please refer to its source code for
- * details of the %key expansion process.
- *
- * @subsection key_generation_random Source of random material
- *
- * OpenVPN uses the either the OpenSSL library or the mbed TLS library as its
- * source of random material.
- *
- * In OpenSSL, the \c RAND_bytes() function is called
- * to supply cryptographically strong pseudo-random data.  The following links
- * contain more information on this subject:
- * - For OpenSSL's \c RAND_bytes() function:
- *   http://www.openssl.org/docs/crypto/RAND_bytes.html
- * - For OpenSSL's pseudo-random number generating system:
- *   http://www.openssl.org/docs/crypto/rand.html
- * - For OpenSSL's support for external crypto modules:
- *   http://www.openssl.org/docs/crypto/engine.html
- *
- * In mbed TLS, the Havege random number generator is used. For details, see
- * the mbed TLS documentation.
- *
- * @section key_generation_exchange Key exchange:
- *
- * The %key exchange process is initiated by the OpenVPN process running
- * in client mode.  After the initial three-way handshake has successfully
- * completed, the client sends its share of random material to the server,
- * after which the server responds with its part.  This process is
- * depicted below:
- *
-@verbatim
-  Client           Client                           Server          Server
-  State            Action                           Action          State
-----------  --------------------            --------------------  ----------
-
-             ... waiting until three-way handshake complete ...
-S_START                                                              S_START
-            key_method_?_write()
-            send to server  --> --> --> -->  receive from client
-S_SENT_KEY                                   key_method_?_read()
-                                                                   S_GOT_KEY
-                                            key_method_?_write()
-            receive from server  <-- <-- <-- <--  send to client
-            key_method_?_read()                                   S_SENT_KEY
-S_GOT_KEY
-          ... waiting until control channel fully synchronized ...
-S_ACTIVE                                                            S_ACTIVE
-@endverbatim
- *
- * For more information about the client and server state values, see the
- * \link control_processor Control Channel Processor module\endlink.
- *
- * Depending on which %key method is used, the \c ? in the function names
- * of the diagram above is a \c 1 or a \c 2.  For example, if %key method
- * 2 is used, that %key exchange would be started by the client calling \c
- * key_method_2_write().  These functions are called from the \link
- * control_processor Control Channel Processor module's\endlink \c
- * tls_process() function and control the %key generation and exchange
- * process as follows:
- * - %Key method 1 has been removed in OpenVPN 2.5
- * - %Key method 2:
- *   - \c key_method_2_write(): generate random material locally, and if
- *     in server mode generate %key expansion.
- *   - \c key_method_2_read(): read random material received from remote
- *     peer, and if in client mode generate %key expansion.
- *
- * @subsection key_generation_encapsulation Transmission of key material
- *
- * The OpenVPN client and server communicate with each other through their
- * control channel.  This means that all of the data transmitted over the
- * network, such as random material for %key generation, is encapsulated
- * in a TLS layer.  For more details, see the \link control_tls Control
- * Channel TLS module\endlink documentation.
- */
diff --git a/doc/doxygen/doc_mainpage.h b/doc/doxygen/doc_mainpage.h
deleted file mode 100644
index 6016d07..0000000
--- a/doc/doxygen/doc_mainpage.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Main page documentation file.
- */
-
-/**
- * @mainpage OpenVPN source code documentation
- *
- * This documentation describes the internal structure of OpenVPN.  It was
- * automatically generated from specially formatted comment blocks in
- * OpenVPN's source code using Doxygen.  (See
- * http://www.stack.nl/~dimitri/doxygen/ for more information on Doxygen)
- *
- * The \ref mainpage_modules "Modules section" below gives an introduction
- * into the high-level module concepts used throughout this documentation.
- * The \ref mainpage_relatedpages "Related Pages section" below describes
- * various special subjects related to OpenVPN's implementation which are
- * discussed in the related pages section.
- *
- * @section mainpage_modules Modules
- *
- * For the purpose of describing the internal structure of OpenVPN, this
- * documentation and the underlying source code has been broken up into a
- * number of conceptually well-defined parts, known as modules. Each
- * module plays a specific role within the OpenVPN process, and in most
- * cases each module has a clear interfacing strategy for interacting with
- * other modules.
- *
- * The following modules have been defined:
- * - Driver module:
- *   - The \link eventloop Main Event Loop\endlink: this module drives the
- *     event handling of OpenVPN.  It implements various types of
- *     select-loop which wait until an event happens, and then delegate
- *     the handling of that event to the appropriate module.
- * - Network interface modules:
- *   - The \link external_multiplexer External Multiplexer\endlink: this
- *     module sends and receives packets to and from remote OpenVPN peers
- *     over the external network interface.  It also takes care of
- *     demultiplexing received packets to their appropriate VPN tunnel and
- *     splitting control channel and data channel packets.
- *   - The \link internal_multiplexer Internal Multiplexer\endlink: this
- *     module sends and receives packets to and from locally reachable
- *     posts over the virtual tun/tap network interface.  It also takes
- *     care of determining through which VPN tunnel a received packet must
- *     be sent to reach its destination.
- * - Control channel modules:
- *   - The \link reliable Reliability Layer\endlink: this module offers a
- *     %reliable and sequential transport layer for control channel
- *     messages.
- *   - The \link control_tls Control Channel TLS module\endlink: this
- *     module offers a secure encapsulation of control channel messages
- *     using the TLS protocol.
- *   - The \link control_processor Control Channel Processor\endlink: his
- *     module manages the setup, maintenance, and shut down of VPN
- *     tunnels.
- * - Data channel modules:
- *   - The \link data_control Data Channel Control module\endlink: this
- *     module controls the processing of data channel packets and,
- *     depending on the settings of the packet's VPN tunnel, passes the
- *     packet to the three modules below for handling.
- *   - The \link data_crypto Data Channel Crypto module\endlink: this
- *     module performs security operations on data channel packets.
- *   - The \link fragmentation Data Channel Fragmentation module\endlink:
- *     this module offers fragmentation of data channel packets larger
- *     than the VPN tunnel's MTU.
- *   - The \link compression Data Channel Compression module\endlink: this
- *     module offers compression of data channel packets.
- *
- * @subsection mainpage_modules_example Example event: receiving a packet
- *
- * OpenVPN handles many types of events during operation.  These include
- * external events, such as network traffic being received, and internal
- * events, such as a %key session timing out causing renegotiation.  An
- * example event, receiving a packet over the network, is described here
- * together with which modules play what roles:
- * -# The \link eventloop Main Event Loop\endlink detects that a packet
- *    can be read from the external or the virtual tun/tap network
- *    interface.
- * -# The \link eventloop Main Event Loop\endlink calls the \link
- *    external_multiplexer External Multiplexer\endlink or \link
- *    internal_multiplexer Internal Multiplexer\endlink to read and
- *    process the packet.
- * -# The multiplexer module determines the type of packet and its
- *    destination, and passes the packet on to the appropriate handling
- *    module:
- *    - A control channel packet received by the \link
- *      external_multiplexer External Multiplexer\endlink is passed on
- *      through the \link reliable Reliability Layer\endlink and the \link
- *      control_tls Control Channel TLS module\endlink to the \link
- *      control_processor Control Channel Processor\endlink.
- *    - A data channel packet received by either multiplexer module is
- *      passed on to the \link data_control Data Channel Control
- *      module\endlink.
- * -# The packet is processed by the appropriate control channel or data
- *    channel modules.
- * -# If, after processing the packet, a resulting packet is generated
- *    that needs to be sent to a local or remote destination, it is given
- *    to the \link external_multiplexer External Multiplexer\endlink or
- *    \link internal_multiplexer Internal Multiplexer\endlink for sending.
- * -# If a packet is waiting to be sent by either multiplexer module and
- *    the \link eventloop Main Event Loop\endlink detects that data can be
- *    written to the associated network interface, it calls the
- *    multiplexer module to send the packet.
- *
- * @section mainpage_relatedpages Related pages
- *
- * This documentation includes a number of descriptions of various aspects
- * of OpenVPN and its implementation.  These are not directly related to
- * one module, function, or data structure, and are therefore listed
- * separately under "Related Pages".
- *
- * @subsection mainpage_relatedpages_key_generation Data channel key generation
- *
- * The @ref key_generation "Data channel key generation" related page
- * describes how, during VPN tunnel setup and renegotiation, OpenVPN peers
- * generate and exchange the %key material required for the symmetric
- * encryption/decryption and HMAC signing/verifying security operations
- * performed on data channel packets.
- *
- * @subsection mainpage_relatedpages_tunnel_state VPN tunnel state
- *
- * The @ref tunnel_state "Structure of VPN tunnel state storage" related
- * page describes how an OpenVPN process manages the state information
- * associated with its active VPN tunnels.
- *
- * @subsection mainpage_relatedpages_network_protocol Network protocol
- *
- * The @ref network_protocol "Network protocol" related page describes the
- * format and content of VPN tunnel packets exchanged between OpenVPN
- * peers.
- *
- * @subsection mainpage_relatedpages_memory_management Memory management
- *
- * The @ref memory_management "Memory management strategies" related page
- * gives a brief introduction into OpenVPN's memory %buffer library and
- * garbage collection facilities.
- */
diff --git a/doc/doxygen/doc_memory_management.h b/doc/doxygen/doc_memory_management.h
deleted file mode 100644
index 1f16328..0000000
--- a/doc/doxygen/doc_memory_management.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Memory management strategies documentation file.
- */
-
-/**
- * @page memory_management OpenVPN's memory management strategies
- *
- * This section describes several implementation details relating to
- * OpenVPN's memory management strategies.
- *
- * During operation, the OpenVPN process performs all kinds of operations
- * on blocks of data.  Receiving packets, encrypting content, prepending
- * headers, etc.  To make the programmer's job easier and to decrease the
- * likelihood of memory-related bugs, OpenVPN uses its own memory %buffer
- * library and garbage collection facilities.  These are described in
- * brief here.
- *
- * @section memory_management_buffer The buffer structure
- *
- * The \c buffer structure is a wrapper around a block of dynamically
- * allocated memory which keeps track of the block's capacity \c
- * buffer.capacity and location in memory \c buffer.data.  This structure
- * supports efficient prepending and appending within the allocated memory
- * through the use of offset \c buffer.offset and length \c buffer.len
- * fields.  See the \c buffer documentation for more details on the
- * structure itself.
- *
- * OpenVPN's %buffer library, implemented in the \c buffer.h and \c
- * buffer.c files, contains many utility functions for working with \c
- * buffer structures.  These functions facilitate common operations, such
- * as allocating, freeing, reading and writing to \c buffer structures,
- * and even offer several more advanced operations, such as string
- * matching and creating sub-buffers.
- *
- * Not only do these utility functions make working with \c buffer
- * structures easy, they also perform extensive error checking.  Each
- * function, where necessary, checks whether enough space is available
- * before performing its actions.  This minimizes the chance of bugs
- * leading to %buffer overflows and other vulnerabilities.
- *
- * @section memory_management_frame The frame structure
- *
- * The \c frame structure keeps track of the maximum allowed packet
- * geometries of a network connection.
- *
- * It is used, for example, to determine the size of \c buffer structures
- * in which to store data channel packets.  This is done by having each
- * data channel processing module register the maximum amount of extra
- * space it will need for header prepending and content expansion in the
- * \c frame structure. Once these parameters are known, \c buffer
- * structures can be allocated, based on the \c frame parameters, so that
- * they are large enough to allow efficient prepending of headers and
- * processing of content.
- *
- * @section memory_management_garbage Garbage collection
- *
- * OpenVPN has many sizable functions which perform various actions
- * depending on their %context.  This makes it difficult to know in advance
- * exactly how much memory must be allocated.  The garbage collection
- * facilities are used to keep track of dynamic allocations, thereby
- * allowing easy collective freeing of the allocated memory.
- *
- * The garbage collection system is implemented by the \c gc_arena and \c
- * gc_entry structures.  The arena represents a garbage collecting unit,
- * and contains a linked list of entries.  Each entry represents one block
- * of dynamically allocated memory.
- *
- * The garbage collection system also contains various utility functions
- * for working with the garbage collection structures.  These include
- * functions for initializing new arenas, allocating memory of a given
- * size and registering the allocation in an arena, and freeing all the
- * allocated memory associated with an arena.
- */
diff --git a/doc/doxygen/doc_protocol_overview.h b/doc/doxygen/doc_protocol_overview.h
deleted file mode 100644
index 0821222..0000000
--- a/doc/doxygen/doc_protocol_overview.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file Network protocol overview documentation file.
- */
-
-/**
- * @page network_protocol OpenVPN's network protocol
- *
- * Description of packet structure in OpenVPN's network protocol.
- *
- * This document describes the structure of packets exchanged between
- * OpenVPN peers.  It is based on the protocol description in the \c ssl.h
- * file.
- *
- * @section network_protocol_external Outer structure of packets exchanged between OpenVPN peers
- *
- * VPN tunnel packets are transported between OpenVPN peers using the UDP
- * or TCP protocols.  Their structure is described below.
- *
- * @subsection network_protocol_external_structure External packet structure
- *
- *  - packet length (16 bits, unsigned) [TCP-mode only]: always sent as
- *    plain text.  Since TCP is a stream protocol, this packet length
- *    defines the packetization of the stream.
- *  - packet opcode and key_id (8 bits) [TLS-mode only]:
- *     - package message type (high 5 bits)
- *     - key_id (low 3 bits): the key_id refers to an already negotiated
- *       TLS session.  OpenVPN seamlessly renegotiates the TLS session by
- *       using a new key_id for the new session.  Overlap (controlled by
- *       user definable parameters) between old and new TLS sessions is
- *       allowed, providing a seamless transition during tunnel operation.
- *  - payload (n bytes)
- *
- * @subsection network_protocol_external_types Message types
- *
- * The type of a VPN tunnel packet is indicated by its opcode.  The
- * following describes the various opcodes available.
- *
- *  - Control channel messages:
- *     - \ref P_CONTROL_HARD_RESET_CLIENT_V1 -- %Key method 1, initial %key
- *       from client, forget previous state.
- *     - \ref P_CONTROL_HARD_RESET_SERVER_V1 -- %Key method 1, initial %key
- *       from server, forget previous state.
- *     - \ref P_CONTROL_HARD_RESET_CLIENT_V2 -- %Key method 2, initial %key
- *       from client, forget previous state.
- *     - \ref P_CONTROL_HARD_RESET_SERVER_V2 -- %Key method 2, initial %key
- *       from server, forget previous state.
- *     - \ref P_CONTROL_SOFT_RESET_V1 -- New %key, with a graceful
- *       transition from old to new %key in the sense that a transition
- *       window exists where both the old or new key_id can be used.
- *     - \ref P_CONTROL_V1 -- Control channel packet (usually TLS
- *       ciphertext).
- *     - \ref P_ACK_V1 -- Acknowledgement for control channel packets
- *       received.
- *  - Data channel messages:
- *     - \ref P_DATA_V1 -- Data channel packet containing data channel
- *       ciphertext.
- *     - \ref P_DATA_V2 -- Data channel packet containing peer-id and data
- *       channel ciphertext.
- *
- * @subsection network_protocol_external_key_id Session IDs and Key IDs
- *
- * OpenVPN uses two different forms of packet identifiers:
- *  - The first form is 64 bits and is used for all control channel
- *    messages.  This form is referred to as a \c session_id.
- *  - Data channel messages on the other hand use a shortened form of 3
- *    bits for efficiency reasons since the vast majority of OpenVPN
- *    packets in an active tunnel will be data channel messages.  This
- *    form is referred to as a \c key_id.
- *
- * The control and data channels use independent packet-id sequences,
- * because the data channel is an unreliable channel while the control
- * channel is a %reliable channel.  Each use their own independent HMAC
- * keys.
- *
- * @subsection network_protocol_external_reliable Control channel reliability layer
- *
- * Control channel messages (\c P_CONTROL_* and \c P_ACK_* message types)
- * are TLS ciphertext packets which have been encapsulated inside of a
- * reliability layer.  The reliability layer is implemented as a
- * straightforward acknowledge and retransmit model.
- *
- * Acknowledgments of received messages can be encoded in either the
- * dedicated \c P_ACK_* record or they can be prepended to a \c
- * P_CONTROL_* message.
- *
- * See the \link reliable Reliability Layer\endlink module for a detailed
- * description.
- *
- * @section network_protocol_control Structure of control channel messages
- *
- * @subsection network_protocol_control_ciphertext Structure of ciphertext control channel messages
- *
- * Control channel packets in ciphertext form consist of the following
- * parts:
- *
- *  - local \c session_id (random 64 bit value to identify TLS session).
- *  - HMAC signature of entire encapsulation header for HMAC firewall
- *    [only if \c --tls-auth is specified] (usually 16 or 20 bytes).
- *  - packet-id for replay protection (4 or 8 bytes, includes sequence
- *    number and optional \c time_t timestamp).
- *  - acknowledgment packet-id array length (1 byte).
- *  - acknowledgment packet-id array (if length > 0).
- *  - acknowledgment remote session-id (if length > 0).
- *  - packet-id of this message (4 bytes).
- *  - TLS payload ciphertext (n bytes) (only for \c P_CONTROL_V1).
- *
- * Note that when \c --tls-auth is used, all message types are protected
- * with an HMAC signature, even the initial packets of the TLS handshake.
- * This makes it easy for OpenVPN to throw away bogus packets quickly,
- * without wasting resources on attempting a TLS handshake which will
- * ultimately fail.
- *
- * @subsection network_protocol_control_key_methods Control channel key methods
- *
- * Once the TLS session has been initialized and authenticated, the TLS
- * channel is used to exchange random %key material for bidirectional
- * cipher and HMAC keys which will be used to secure data channel packets.
- * OpenVPN currently implements two %key methods.  %Key method 1 directly
- * derives keys using random bits obtained from the \c rand_bytes() function.
- * %Key method 2 mixes random %key material from both sides of the connection
- * using the TLS PRF mixing function.  %Key method 2 is the preferred method and
- * is the default for OpenVPN 2.0+.
- *
- * The @ref key_generation "Data channel key generation" related page
- * describes the %key methods in more detail.
- *
- * @subsection network_protocol_control_plaintext Structure of plaintext control channel messages
- *
- *  - %Key method 1 (support removed in OpenVPN 2.5):
- *     - Cipher %key length in bytes (1 byte).
- *     - Cipher %key (n bytes).
- *     - HMAC %key length in bytes (1 byte).
- *     - HMAC %key (n bytes).
- *     - %Options string (n bytes, null terminated, client/server %options
- *       string should match).
- *  - %Key method 2:
- *     - Literal 0 (4 bytes).
- *     - %Key method (1 byte).
- *     - \c key_source structure (\c key_source.pre_master only defined
- *       for client -> server).
- *     - %Options string length, including null (2 bytes).
- *     - %Options string (n bytes, null terminated, client/server %options
- *       string must match).
- *     - [The username/password data below is optional, record can end at
- *       this point.]
- *     - Username string length, including null (2 bytes).
- *     - Username string (n bytes, null terminated).
- *     - Password string length, including null (2 bytes).
- *     - Password string (n bytes, null terminated).
- *
- * @section network_protocol_data Structure of data channel messages
- *
- * The P_DATA_* payload represents encapsulated tunnel packets which tend to be
- * either IP packets or Ethernet frames. This is essentially the "payload" of
- * the VPN. Data channel packets consist of a data channel header, and a
- * payload. There are two possible formats:
- *
- * @par P_DATA_V1
- * P_DATA_V1 packets have a 1-byte header, carrying the \ref P_DATA_V1 \c opcode
- * and \c key_id, followed by the payload:\n
- * <tt> [ 5-bit opcode | 3-bit key_id ] [ payload ] </tt>
- *
- * @par P_DATA_V2
- * P_DATA_V2 packets have the same 1-byte opcode/key_id, but carrying the \ref
- * P_DATA_V2 opcode, followed by a 3-byte peer-id, which uniquely identifies
- * the peer:\n
- * <tt> [ 5-bit opcode | 3-bit key_id ] [ 24-bit peer-id ] [ payload ] </tt>
- *
- * See @ref data_crypto for details on the data channel payload format.
- *
- */
diff --git a/doc/doxygen/doc_reliable.h b/doc/doxygen/doc_reliable.h
deleted file mode 100644
index 70556d7..0000000
--- a/doc/doxygen/doc_reliable.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * Reliability Layer module documentation file.
- */
-
-/**
- * @defgroup reliable Reliability Layer module
- *
- * The Reliability Layer is part of OpenVPN's control channel.  It
- * provides a reliable and sequential transport mechanism for control
- * channel messages between OpenVPN peers.  This module forms the
- * interface between the \link external_multiplexer External
- * Multiplexer\endlink and the \link control_tls Control Channel TLS
- * module\endlink.
- *
- * @par UDP or TCP as VPN tunnel transport
- *
- * This is especially important when OpenVPN is configured to communicate
- * over UDP, because UDP does not offer a reliable and sequential
- * transport.  OpenVPN endpoints can also communicate over TCP which does
- * provide a reliable and sequential transport.  In both cases, using UDP
- * or TCP as an external transport, the internal Reliability Layer is
- * active.
- */
diff --git a/doc/doxygen/doc_tunnel_state.h b/doc/doxygen/doc_tunnel_state.h
deleted file mode 100644
index 46e750f..0000000
--- a/doc/doxygen/doc_tunnel_state.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- *  OpenVPN -- An application to securely tunnel IP networks
- *             over a single TCP/UDP port, with support for SSL/TLS-based
- *             session authentication and key exchange,
- *             packet encryption, packet authentication, and
- *             packet compression.
- *
- *  Copyright (C) 2010-2018 Fox Crypto B.V. <openvpn@fox-it.com>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/**
- * @file
- * VPN tunnel state documentation file.
- */
-
-/**
- * @page tunnel_state Structure of the VPN tunnel state storage
- *
- * This section describes how OpenVPN stores its VPN tunnel state during
- * operation.
- *
- * OpenVPN uses several data structures as storage containers for state
- * information of active VPN tunnels.  These are described in this
- * section, together with a little bit of history to help understand the
- * origin of the current architecture.
- *
- * Whether an OpenVPN process is running in client-mode or server-mode
- * determines whether it can support only one or multiple simultaneously
- * active VPN tunnels.  This consequently also determines how the
- * associated state information is wrapped up internally.  This section
- * gives an overview of the differences.
- *
- * @section tunnel_state_history Historic developments
- *
- * In the old v1.x series, an OpenVPN process managed only one single VPN
- * tunnel.  This allowed the VPN tunnel state to be stored together with
- * process-global information in one single \c context structure.
- *
- * This changed, however, in the v2.x series, as new OpenVPN versions
- * running in server-mode can support multiple simultaneously active VPN
- * tunnels.  This necessitated a redesign of the VPN tunnel state
- * container structures, and modification of the \link
- * external_multiplexer External Multiplexer\endlink and \link
- * internal_multiplexer Internal Multiplexer\endlink systems.  The
- * majority of these changes are only relevant for OpenVPN processes
- * running in server-mode, and the client-mode structure has remained very
- * similar to the v1.x single-tunnel form.
- *
- * @section tunnel_state_client Client-mode state
- *
- * An OpenVPN process running in client-mode can manage at most one single
- * VPN tunnel at any one time.  The state information for a client's VPN
- * tunnel is stored in a \c context structure.
- *
- * The \c context structure is created in the \c main() function.  That is
- * also where process-wide initialization takes place, such as parsing
- * command line %options and reading configuration files.  The \c context
- * is then passed to \c tunnel_point_to_point() which drives OpenVPN's
- * main event processing loop.  These functions are both part of the \link
- * eventloop Main Event Loop\endlink module.
- *
- * @subsection tunnel_state_client_init Initialization and cleanup
- *
- * Because there is only one \c context structure present, it can be
- * initialized and cleaned up from the client's main event processing
- * function.  Before the \c tunnel_point_to_point() function enters its
- * event loop, it calls \c init_instance_handle_signals() which calls \c
- * init_instance() to initialize the single \c context structure.  After
- * the event loop stops, it calls \c close_instance() to clean up the \c
- * context.
- *
- * @subsection tunnel_state_client_event Event processing
- *
- * When the main event processing loop activates the external or internal
- * multiplexer to handle a network event, it is not necessary to determine
- * which VPN tunnel the event is associated with, because there is only
- * one VPN tunnel active.
- *
- * @section tunnel_state_server Server-mode state
- *
- * An OpenVPN process running in server-mode can manage multiple
- * simultaneously active VPN tunnels.  For every VPN tunnel active, in
- * other words for every OpenVPN client which is connected to a server,
- * the OpenVPN server has one \c context structure in which it stores that
- * particular VPN tunnel's state information.
- *
- * @subsection tunnel_state_server_multi Multi_context and multi_instance structures
- *
- * To support multiple \c context structures, each is wrapped in a \c
- * multi_instance structure, and all the \c multi_instance structures are
- * registered in one single \c multi_context structure.  The \link
- * external_multiplexer External Multiplexer\endlink and \link
- * internal_multiplexer Internal Multiplexer\endlink then use the \c
- * multi_context to retrieve the correct \c multi_instance and \c context
- * associated with a given network address.
- *
- * @subsection tunnel_state_server_init Startup and initialization
- *
- * An OpenVPN process running in server-mode starts in the same \c main()
- * function as it would in client-mode.  The same process-wide
- * initialization is performed, and the resulting state and configuration
- * is stored in a \c context structure. The server-mode and client-mode
- * processes diverge when the \c main() function calls one of \c
- * tunnel_point_to_point() or \c tunnel_server().
- *
- * In server-mode, \c main() calls the \c tunnel_server() function, which
- * transfers control to \c tunnel_server_udp_single_threaded() or \c
- * tunnel_server_tcp() depending on the external transport protocol.
- *
- * These functions receive the \c context created in \c main().  This
- * object has a special status in server-mode, as it does not represent an
- * active VPN tunnel, but does contain process-wide configuration
- * parameters.  In the source code, it is often stored in "top" variables.
- * To distinguish this object from other instances of the same type, its
- * \c context.mode value is set to \c CM_TOP.  Other \c context objects,
- * which do represent active VPN tunnels, have a \c context.mode set to \c
- * CM_CHILD_UDP or \c CM_CHILD_TCP, depending on the external transport
- * protocol.
- *
- * Both \c tunnel_server_udp_single_threaded() and \c tunnel_server_tcp()
- * perform similar initialization.  In either case, a \c multi_context
- * structure is created, and it is initialized according to the
- * configuration stored in the top \c context by the \c multi_init() and
- * \c multi_top_init() functions.
- *
- * @subsection tunnel_state_server_tunnels Creating and destroying VPN tunnels
- *
- * When an OpenVPN client makes a new connection to a server, the server
- * creates a new \c context and \c multi_instance.  The latter is
- * registered in the \c multi_context, which makes it possible for the
- * external and internal multiplexers to retrieve the correct \c
- * multi_instance and \c context when a network event occurs.
- *
- * @subsection tunnel_state_server_cleanup Final cleanup
- *
- * After the main event loop exits, both \c
- * tunnel_server_udp_single_threaded() and \c tunnel_server_tcp() perform
- * similar cleanup.  They call \c multi_uninit() followed by \c
- * multi_top_free() to clean up the \c multi_context structure.
- */