Merge branch 'upstream' into develop

3 files changed, 833 insertions, 0 deletions

diff --git a/doc/doxygen/Makefile.am b/doc/doxygen/Makefile.am
new file mode 100644
index 0000000..82d909d
--- /dev/null
+++ b/doc/doxygen/Makefile.am
@@ -0,0 +1,21 @@
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2017-2021 Fox-IT B.V. <openvpn@foxcrypto.com>
+#
+
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+DISTCLEANFILES = openvpn.doxyfile
+
+.PHONY: doxygen
+doxygen: openvpn.doxyfile
+	doxygen openvpn.doxyfile
+
+clean-local:
+	-rm -rf html latex
diff --git a/doc/doxygen/Makefile.in b/doc/doxygen/Makefile.in
new file mode 100644
index 0000000..48bd413
--- /dev/null
+++ b/doc/doxygen/Makefile.in
@@ -0,0 +1,533 @@
+# Makefile.in generated by automake 1.16.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2017-2021 Fox-IT B.V. <openvpn@foxcrypto.com>
+#
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc/doxygen
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \
+	$(top_srcdir)/m4/ax_socklen_t.m4 \
+	$(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \
+	$(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h \
+	$(top_builddir)/include/openvpn-plugin.h
+CONFIG_CLEAN_FILES = openvpn.doxyfile
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/openvpn.doxyfile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CMOCKA_CFLAGS = @CMOCKA_CFLAGS@
+CMOCKA_LIBS = @CMOCKA_LIBS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DL_LIBS = @DL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_UNITTESTS = @ENABLE_UNITTESTS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GIT = @GIT@
+GREP = @GREP@
+IFCONFIG = @IFCONFIG@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPROUTE = @IPROUTE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBPAM_CFLAGS = @LIBPAM_CFLAGS@
+LIBPAM_LIBS = @LIBPAM_LIBS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZ4_CFLAGS = @LZ4_CFLAGS@
+LZ4_LIBS = @LZ4_LIBS@
+LZO_CFLAGS = @LZO_CFLAGS@
+LZO_LIBS = @LZO_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MBEDTLS_CFLAGS = @MBEDTLS_CFLAGS@
+MBEDTLS_LIBS = @MBEDTLS_LIBS@
+MKDIR_P = @MKDIR_P@
+NETSTAT = @NETSTAT@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
+OPENVPN_VERSION_MAJOR = @OPENVPN_VERSION_MAJOR@
+OPENVPN_VERSION_MINOR = @OPENVPN_VERSION_MINOR@
+OPENVPN_VERSION_PATCH = @OPENVPN_VERSION_PATCH@
+OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@
+OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@
+OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@
+OPTIONAL_INOTIFY_CFLAGS = @OPTIONAL_INOTIFY_CFLAGS@
+OPTIONAL_INOTIFY_LIBS = @OPTIONAL_INOTIFY_LIBS@
+OPTIONAL_LZ4_CFLAGS = @OPTIONAL_LZ4_CFLAGS@
+OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@
+OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@
+OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@
+OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@
+OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@
+OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@
+OPTIONAL_SYSTEMD_LIBS = @OPTIONAL_SYSTEMD_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+P11KIT_CFLAGS = @P11KIT_CFLAGS@
+P11KIT_LIBS = @P11KIT_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@
+PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PLUGINDIR = @PLUGINDIR@
+PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@
+PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+ROUTE = @ROUTE@
+RST2HTML = @RST2HTML@
+RST2MAN = @RST2MAN@
+SED = @SED@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOCKETS_LIBS = @SOCKETS_LIBS@
+STRIP = @STRIP@
+SYSTEMD_ASK_PASSWORD = @SYSTEMD_ASK_PASSWORD@
+SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@
+TAP_CFLAGS = @TAP_CFLAGS@
+TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@
+TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@
+TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@
+TEST_CFLAGS = @TEST_CFLAGS@
+TEST_LDFLAGS = @TEST_LDFLAGS@
+TMPFILES_DIR = @TMPFILES_DIR@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libsystemd_CFLAGS = @libsystemd_CFLAGS@
+libsystemd_LIBS = @libsystemd_LIBS@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+plugindir = @plugindir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sampledir = @sampledir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdunitdir = @systemdunitdir@
+target_alias = @target_alias@
+tmpfilesdir = @tmpfilesdir@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+DISTCLEANFILES = openvpn.doxyfile
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/doxygen/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/doxygen/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+openvpn.doxyfile: $(top_builddir)/config.status $(srcdir)/openvpn.doxyfile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	clean-local cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+.PHONY: doxygen
+doxygen: openvpn.doxyfile
+	doxygen openvpn.doxyfile
+
+clean-local:
+	-rm -rf html latex
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/doxygen/openvpn.doxyfile.in b/doc/doxygen/openvpn.doxyfile.in
new file mode 100644
index 0000000..beb02d9
--- /dev/null
+++ b/doc/doxygen/openvpn.doxyfile.in
@@ -0,0 +1,279 @@
+# Doxyfile 1.5.5
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+DOXYFILE_ENCODING      = UTF-8
+PROJECT_NAME           = "OpenVPN"
+PROJECT_NUMBER         =
+OUTPUT_DIRECTORY       = "@abs_top_builddir@/doc/doxygen"
+CREATE_SUBDIRS         = NO
+OUTPUT_LANGUAGE        = English
+BRIEF_MEMBER_DESC      = YES
+REPEAT_BRIEF           = YES
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+ALWAYS_DETAILED_SEC    = NO
+INLINE_INHERITED_MEMB  = NO
+FULL_PATH_NAMES        = YES
+STRIP_FROM_PATH        = "@abs_top_srcdir@"
+STRIP_FROM_INC_PATH    =
+SHORT_NAMES            = NO
+JAVADOC_AUTOBRIEF      = YES # NO
+QT_AUTOBRIEF           = NO
+MULTILINE_CPP_IS_BRIEF = NO
+DETAILS_AT_TOP         = NO
+INHERIT_DOCS           = YES
+SEPARATE_MEMBER_PAGES  = NO
+TAB_SIZE               = 8
+ALIASES                =
+OPTIMIZE_OUTPUT_FOR_C  = YES
+OPTIMIZE_OUTPUT_JAVA   = NO
+OPTIMIZE_FOR_FORTRAN   = NO
+OPTIMIZE_OUTPUT_VHDL   = NO
+BUILTIN_STL_SUPPORT    = NO
+CPP_CLI_SUPPORT        = NO
+SIP_SUPPORT            = NO
+DISTRIBUTE_GROUP_DOC   = NO
+SUBGROUPING            = YES
+TYPEDEF_HIDES_STRUCT   = NO
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+EXTRACT_ALL            = YES
+EXTRACT_PRIVATE        = YES
+EXTRACT_STATIC         = YES
+EXTRACT_LOCAL_CLASSES  = YES
+EXTRACT_LOCAL_METHODS  = YES
+EXTRACT_ANON_NSPACES   = YES
+HIDE_UNDOC_MEMBERS     = NO
+HIDE_UNDOC_CLASSES     = NO
+HIDE_FRIEND_COMPOUNDS  = NO
+HIDE_IN_BODY_DOCS      = NO
+INTERNAL_DOCS          = NO
+CASE_SENSE_NAMES       = NO
+HIDE_SCOPE_NAMES       = NO
+SHOW_INCLUDE_FILES     = YES
+INLINE_INFO            = YES
+SORT_MEMBER_DOCS       = YES
+SORT_BRIEF_DOCS        = NO
+SORT_GROUP_NAMES       = NO
+SORT_BY_SCOPE_NAME     = NO
+GENERATE_TODOLIST      = YES
+GENERATE_TESTLIST      = YES
+GENERATE_BUGLIST       = YES
+GENERATE_DEPRECATEDLIST= YES
+ENABLED_SECTIONS       =
+MAX_INITIALIZER_LINES  = 30
+SHOW_USED_FILES        = YES
+SHOW_DIRECTORIES       = NO
+FILE_VERSION_FILTER    =
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+QUIET                  = NO
+WARNINGS               = YES
+WARN_IF_UNDOCUMENTED   = YES
+WARN_IF_DOC_ERROR      = YES
+WARN_NO_PARAMDOC       = NO
+WARN_FORMAT            = "$file:$line: $text"
+WARN_LOGFILE           =
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+INPUT                  = "@abs_top_srcdir@"
+INPUT_ENCODING         = UTF-8
+FILE_PATTERNS          = *.c \
+                         *.cc \
+                         *.cxx \
+                         *.cpp \
+                         *.c++ \
+                         *.d \
+                         *.java \
+                         *.ii \
+                         *.ixx \
+                         *.ipp \
+                         *.i++ \
+                         *.inl \
+                         *.h \
+                         *.hh \
+                         *.hxx \
+                         *.hpp \
+                         *.h++ \
+                         *.idl \
+                         *.odl \
+                         *.cs \
+                         *.php \
+                         *.php3 \
+                         *.inc \
+                         *.m \
+                         *.mm \
+                         *.dox \
+                         *.py \
+                         *.f90 \
+                         *.f \
+                         *.vhd \
+                         *.vhdl
+RECURSIVE              = YES
+EXCLUDE                =
+EXCLUDE_SYMLINKS       = NO
+EXCLUDE_PATTERNS       =
+EXCLUDE_SYMBOLS        =
+EXAMPLE_PATH           =
+EXAMPLE_PATTERNS       = *
+EXAMPLE_RECURSIVE      = NO
+IMAGE_PATH             =
+INPUT_FILTER           =
+FILTER_PATTERNS        =
+FILTER_SOURCE_FILES    = NO
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+SOURCE_BROWSER         = YES
+INLINE_SOURCES         = NO
+STRIP_CODE_COMMENTS    = YES
+REFERENCED_BY_RELATION = YES
+REFERENCES_RELATION    = YES
+REFERENCES_LINK_SOURCE = YES
+USE_HTAGS              = NO
+VERBATIM_HEADERS       = YES
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+ALPHABETICAL_INDEX     = NO
+COLS_IN_ALPHA_INDEX    = 5
+IGNORE_PREFIX          =
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+GENERATE_HTML          = YES
+HTML_OUTPUT            = html
+HTML_FILE_EXTENSION    = .html
+HTML_HEADER            =
+HTML_FOOTER            =
+HTML_STYLESHEET        =
+HTML_ALIGN_MEMBERS     = YES
+GENERATE_HTMLHELP      = NO
+GENERATE_DOCSET        = NO
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+HTML_DYNAMIC_SECTIONS  = NO
+CHM_FILE               =
+HHC_LOCATION           =
+GENERATE_CHI           = NO
+BINARY_TOC             = NO
+TOC_EXPAND             = NO
+DISABLE_INDEX          = NO
+ENUM_VALUES_PER_LINE   = 4
+GENERATE_TREEVIEW      = NO
+TREEVIEW_WIDTH         = 250
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+GENERATE_LATEX         = YES
+LATEX_OUTPUT           = latex
+LATEX_CMD_NAME         = latex
+MAKEINDEX_CMD_NAME     = makeindex
+COMPACT_LATEX          = YES # NO
+PAPER_TYPE             = a4wide
+EXTRA_PACKAGES         =
+LATEX_HEADER           =
+PDF_HYPERLINKS         = YES
+USE_PDFLATEX           = YES
+LATEX_BATCHMODE        = NO
+LATEX_HIDE_INDICES     = NO
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+GENERATE_RTF           = NO
+RTF_OUTPUT             = rtf
+COMPACT_RTF            = NO
+RTF_HYPERLINKS         = NO
+RTF_STYLESHEET_FILE    =
+RTF_EXTENSIONS_FILE    =
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+GENERATE_MAN           = NO
+MAN_OUTPUT             = man
+MAN_EXTENSION          = .3
+MAN_LINKS              = NO
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+GENERATE_XML           = NO
+XML_OUTPUT             = xml
+XML_SCHEMA             =
+XML_DTD                =
+XML_PROGRAMLISTING     = YES
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+GENERATE_AUTOGEN_DEF   = NO
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+GENERATE_PERLMOD       = NO
+PERLMOD_LATEX          = NO
+PERLMOD_PRETTY         = YES
+PERLMOD_MAKEVAR_PREFIX =
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+ENABLE_PREPROCESSING   = YES
+MACRO_EXPANSION        = NO
+EXPAND_ONLY_PREDEF     = NO
+SEARCH_INCLUDES        = YES
+INCLUDE_PATH           =
+INCLUDE_FILE_PATTERNS  =
+PREDEFINED             = _WIN32 NTLM USE_LZO ENABLE_FRAGMENT P2MP ENABLE_CRYPTO_OPENSSL ENABLE_PLUGIN ENABLE_MANAGEMENT ENABLE_OCC HAVE_GETTIMEOFDAY
+EXPAND_AS_DEFINED      =
+SKIP_FUNCTION_MACROS   = YES
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+TAGFILES               =
+GENERATE_TAGFILE       =
+ALLEXTERNALS           = NO
+EXTERNAL_GROUPS        = YES
+PERL_PATH              = /usr/bin/perl
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+CLASS_DIAGRAMS         = NO
+MSCGEN_PATH            =
+HIDE_UNDOC_RELATIONS   = YES
+HAVE_DOT               = YES
+CLASS_GRAPH            = YES
+COLLABORATION_GRAPH    = YES
+GROUP_GRAPHS           = YES
+UML_LOOK               = NO
+TEMPLATE_RELATIONS     = NO
+INCLUDE_GRAPH          = YES
+INCLUDED_BY_GRAPH      = YES
+CALL_GRAPH             = NO # YES
+CALLER_GRAPH           = NO # YES
+GRAPHICAL_HIERARCHY    = YES
+DIRECTORY_GRAPH        = YES
+DOT_IMAGE_FORMAT       = png
+DOT_PATH               = "/usr/bin/dot"
+DOTFILE_DIRS           =
+DOT_GRAPH_MAX_NODES    = 50
+MAX_DOT_GRAPH_DEPTH    = 1000
+DOT_TRANSPARENT        = YES
+DOT_MULTI_TARGETS      = NO
+GENERATE_LEGEND        = YES
+DOT_CLEANUP            = YES
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+SEARCHENGINE           = NO