New upstream version 2.5~beta1upstream/2.5_beta1

1 files changed, 78 insertions, 0 deletions

diff --git a/doc/man-sections/virtual-routing-and-forwarding.rst b/doc/man-sections/virtual-routing-and-forwarding.rst
new file mode 100644
index 0000000..28c13ee
--- /dev/null
+++ b/doc/man-sections/virtual-routing-and-forwarding.rst
@@ -0,0 +1,78 @@
+Virtual Routing and Forwarding
+------------------------------
+
+Options in this section relates to configuration of virtual routing and
+forwarding in combination with the underlying operating system.
+
+As of today this is only supported on Linux, a kernel >= 4.9 is
+recommended.
+
+This could come in handy when for example the external network should be
+only used as a means to connect to some VPN endpoints and all regular
+traffic should only be routed through any tunnel(s).  This could be
+achieved by setting up a VRF and configuring the interface connected to
+the external network to be part of the VRF. The examples below will cover
+this setup.
+
+Another option would be to put the tun/tap interface into a VRF. This could
+be done by an up-script which uses the :code:`ip link set` command shown
+below.
+
+
+VRF setup with iproute2
+```````````````````````
+
+Create VRF :code:`vrf_external` and map it to routing table :code:`1023`
+::
+
+      ip link add vrf_external type vrf table 1023
+
+Move :code:`eth0` into :code:`vrf_external`
+::
+
+      ip link set master vrf_external dev eth0
+
+Any prefixes configured on :code:`eth0` will be moved from the :code`main`
+routing table into routing table `1023`
+
+
+VRF setup with ifupdown
+```````````````````````
+
+For Debian based Distributions :code:`ifupdown2` provides an almost drop-in
+replacement for :code:`ifupdown` including VRFs and other features.
+A configuration for an interface :code:`eth0` being part of VRF
+code:`vrf_external` could look like this:
+::
+
+      auto eth0
+      iface eth0
+          address 192.0.2.42/24
+          address 2001:db8:08:15::42/64
+          gateway 192.0.2.1
+          gateway 2001:db8:08:15::1
+          vrf vrf_external
+
+      auto vrf_external
+      iface vrf_external
+          vrf-table 1023
+
+
+OpenVPN configuration
+`````````````````````
+The OpenVPN configuration needs to contain this line:
+::
+
+      bind-dev vrf_external
+
+
+Further reading
+```````````````
+
+Wikipedia has nice page one VRFs: https://en.wikipedia.org/wiki/Virtual_routing_and_forwarding
+
+This talk from the Network Track of FrOSCon 2018 provides an overview about
+advanced layer 2 and layer 3 features of Linux
+
+  - Slides: https://www.slideshare.net/BarbarossaTM/l2l3-fr-fortgeschrittene-helle-und-dunkle-magie-im-linuxnetzwerkstack
+  - Video (german): https://media.ccc.de/v/froscon2018-2247-l2\_l3\_fur\_fortgeschrittene\_-\_helle\_und\_dunkle\_magie\_im\_linux-netzwerkstack