Imported Upstream version 2.3.4upstream/2.3.4

1 files changed, 146 insertions, 123 deletions

diff --git a/src/Makefile.in b/src/Makefile.in
index 58ab8bc..0a33984 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -26,23 +25,51 @@
 #  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
 #
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -62,7 +89,7 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \
 	$(top_srcdir)/m4/ax_socklen_t.m4 \
@@ -77,15 +104,28 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -93,9 +133,29 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -127,6 +187,7 @@ am__relativize = \
   reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AS = @AS@
 AUTOCONF = @AUTOCONF@
@@ -325,22 +386,25 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -355,57 +419,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -421,12 +440,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -438,15 +452,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -455,6 +465,21 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -616,22 +641,20 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
-	install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic clean-libtool \
-	ctags ctags-recursive distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.