New upstream version 2.5~beta1upstream/2.5_beta1

1 files changed, 0 insertions, 425 deletions

diff --git a/tests/t_client.sh b/tests/t_client.sh
deleted file mode 100755
index b51813e..0000000
--- a/tests/t_client.sh
+++ /dev/null
@@ -1,425 +0,0 @@
-#!/bin/sh
-#
-# run OpenVPN client against ``test reference'' server
-# - check that ping, http, ... via tunnel works
-# - check that interface config / routes are properly cleaned after test end
-#
-# prerequisites:
-# - openvpn binary in current directory
-# - writable current directory to create subdir for logs
-# - t_client.rc in current directory OR source dir that specifies tests
-# - for "ping4" checks: fping binary in $PATH
-# - for "ping6" checks: fping6 binary in $PATH
-#
-
-srcdir="${srcdir:-.}"
-top_builddir="${top_builddir:-..}"
-if [ -r "${top_builddir}"/t_client.rc ] ; then
-    . "${top_builddir}"/t_client.rc
-elif [ -r "${srcdir}"/t_client.rc ] ; then
-    . "${srcdir}"/t_client.rc
-else
-    echo "$0: cannot find 't_client.rc' in build dir ('${top_builddir}')" >&2
-    echo "$0: or source directory ('${srcdir}'). SKIPPING TEST." >&2
-    exit 77
-fi
-
-# Check for external dependencies
-which fping > /dev/null
-if [ $? -ne 0 ]; then
-    echo "$0: fping is not available in \$PATH" >&2
-    exit 77
-fi
-which fping6 > /dev/null
-if [ $? -ne 0 ]; then
-    echo "$0: fping6 is not available in \$PATH" >&2
-    exit 77
-fi
-
-KILL_EXEC=`which kill`
-if [ $? -ne 0 ]; then
-    echo "$0: kill not found in \$PATH" >&2
-    exit 77
-fi
-
-if [ ! -x "${top_builddir}/src/openvpn/openvpn" ]
-then
-    echo "no (executable) openvpn binary in current build tree. FAIL." >&2
-    exit 1
-fi
-
-if [ ! -w . ]
-then
-    echo "current directory is not writable (required for logging). FAIL." >&2
-    exit 1
-fi
-
-if [ -z "$CA_CERT" ] ; then
-    echo "CA_CERT not defined in 't_client.rc'. SKIP test." >&2
-    exit 77
-fi
-
-if [ -z "$TEST_RUN_LIST" ] ; then
-    echo "TEST_RUN_LIST empty, no tests defined.  SKIP test." >&2
-    exit 77
-fi
-
-# Ensure PREFER_KSU is in a known state
-PREFER_KSU="${PREFER_KSU:-0}"
-
-# make sure we have permissions to run ifconfig/route from OpenVPN
-# can't use "id -u" here - doesn't work on Solaris
-ID=`id`
-if expr "$ID" : "uid=0" >/dev/null
-then :
-else
-    if [ "${PREFER_KSU}" -eq 1 ];
-    then
-        # Check if we have a valid kerberos ticket
-        klist -l 1>/dev/null 2>/dev/null
-        if [ $? -ne 0 ];
-        then
-            # No kerberos ticket found, skip ksu and fallback to RUN_SUDO
-            PREFER_KSU=0
-            echo "$0: No Kerberos ticket available.  Will not use ksu."
-        else
-            RUN_SUDO="ksu -q -e"
-        fi
-    fi
-
-    if [ -z "$RUN_SUDO" ]
-    then
-        echo "$0: this test must run be as root, or RUN_SUDO=... " >&2
-        echo "      must be set correctly in 't_client.rc'. SKIP." >&2
-        exit 77
-    else
-        # We have to use sudo. Make sure that we (hopefully) do not have
-        # to ask the users password during the test. This is done to
-        # prevent timing issues, e.g. when the waits for openvpn to start
-	if $RUN_SUDO $KILL_EXEC -0 $$
-	then
-	    echo "$0: $RUN_SUDO $KILL_EXEC -0 succeeded, good."
-	else
-	    echo "$0: $RUN_SUDO $KILL_EXEC -0 failed, cannot go on. SKIP." >&2
-	    exit 77
-	fi
-    fi
-fi
-
-LOGDIR=t_client-`hostname`-`date +%Y%m%d-%H%M%S`
-if mkdir $LOGDIR
-then :
-else
-    echo "can't create log directory '$LOGDIR'. FAIL." >&2
-    exit 1
-fi
-
-exit_code=0
-
-# ----------------------------------------------------------
-# helper functions
-# ----------------------------------------------------------
-
-# print failure message, increase FAIL counter
-fail()
-{
-    echo ""
-    echo "FAIL: $@" >&2
-    fail_count=$(( $fail_count + 1 ))
-}
-
-# print "all interface IP addresses" + "all routes"
-# this is higly system dependent...
-get_ifconfig_route()
-{
-    # linux / iproute2? (-> if configure got a path)
-    if [ -n "/usr/sbin/ip" ]
-    then
-	echo "-- linux iproute2 --"
-	/usr/sbin/ip addr show     | grep -v valid_lft
-	/usr/sbin/ip route show
-	/usr/sbin/ip -o -6 route show | grep -v ' cache' | sed -E -e 's/ expires [0-9]*sec//' -e 's/ (mtu|hoplimit|cwnd|ssthresh) [0-9]+//g' -e 's/ (rtt|rttvar) [0-9]+ms//g'
-	return
-    fi
-
-    # try uname
-    case `uname -s` in
-	Linux)
-	   echo "-- linux / ifconfig --"
-	   LANG=C /usr/sbin/ifconfig -a |egrep  "( addr:|encap:)"
-	   LANG=C netstat -rn -4 -6
-	   return
-	   ;;
-	FreeBSD|NetBSD|Darwin)
-	   echo "-- FreeBSD/NetBSD/Darwin [MacOS X] --"
-	   /usr/sbin/ifconfig -a | egrep "(flags=|inet)"
-	   netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$NF }'
-	   return
-	   ;;
-	OpenBSD)
-	   echo "-- OpenBSD --"
-	   /usr/sbin/ifconfig -a | egrep "(flags=|inet)" | \
-		sed -e 's/pltime [0-9]*//' -e 's/vltime [0-9]*//'
-	   netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$NF }'
-	   return
-	   ;;
-	SunOS)
-	   echo "-- Solaris --"
-	   /usr/sbin/ifconfig -a | egrep "(flags=|inet)"
-	   netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$6 }'
-	   return
-	   ;;
-	AIX)
-	   echo "-- AIX --"
-	   /usr/sbin/ifconfig -a | egrep "(flags=|inet)"
-	   netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$6 }'
-	   return
-	   ;;
-    esac
-
-    echo "get_ifconfig_route(): no idea how to get info on your OS.  FAIL." >&2
-    exit 20
-}
-
-# ----------------------------------------------------------
-# check ifconfig
-#  arg1: "4" or "6" -> for message
-#  arg2: IPv4/IPv6 address that must show up in out of "get_ifconfig_route"
-check_ifconfig()
-{
-    proto=$1 ; shift
-    expect_list="$@"
-
-    if [ -z "$expect_list" ] ; then return ; fi
-
-    for expect in $expect_list
-    do
-	if get_ifconfig_route | fgrep "$expect" >/dev/null
-	then :
-	else
-	    fail "check_ifconfig(): expected IPv$proto address '$expect' not found in ifconfig output."
-	fi
-    done
-}
-
-# ----------------------------------------------------------
-# run pings
-#  arg1: "4" or "6" -> fping/fing6
-#  arg2: "want_ok" or "want_fail" (expected ping result)
-#  arg3... -> fping arguments (host list)
-run_ping_tests()
-{
-    proto=$1 ; want=$2 ; shift ; shift
-    targetlist="$@"
-
-    # "no targets" is fine
-    if [ -z "$targetlist" ] ; then return ; fi
-
-    case $proto in
-	4) cmd=fping ;;
-	6) cmd=fping6 ;;
-	*) echo "internal error in run_ping_tests arg 1: '$proto'" >&2
-	   exit 1 ;;
-    esac
-
-    case $want in
-	want_ok)   sizes_list="64 1440 3000" ;;
-	want_fail) sizes_list="64" ;;
-    esac
-
-    for bytes in $sizes_list
-    do
-	echo "run IPv$proto ping tests ($want), $bytes byte packets..."
-
-	echo "$cmd -b $bytes -C 20 -p 250 -q $FPING_EXTRA_ARGS $targetlist" >>$LOGDIR/$SUF:fping.out
-	$cmd -b $bytes -C 20 -p 250 -q $FPING_EXTRA_ARGS $targetlist >>$LOGDIR/$SUF:fping.out 2>&1
-
-	# while OpenVPN is running, pings must succeed (want='want_ok')
-	# before OpenVPN is up, pings must NOT succeed (want='want_fail')
-
-	rc=$?
-	if [ $rc = 0 ] 				# all ping OK
-	then
-	    if [ $want = "want_fail" ]		# not what we want
-	    then
-		fail "IPv$proto ping test succeeded, but needs to *fail*."
-	    fi
-	else					# ping failed
-	    if [ $want = "want_ok" ]		# not what we wanted
-	    then
-		fail "IPv$proto ping test ($bytes bytes) failed, but should succeed."
-	    fi
-	fi
-    done
-}
-
-# ----------------------------------------------------------
-# main test loop
-# ----------------------------------------------------------
-SUMMARY_OK=
-SUMMARY_FAIL=
-
-for SUF in $TEST_RUN_LIST
-do
-    # get config variables
-    eval test_prep=\"\$PREPARE_$SUF\"
-    eval test_postinit=\"\$POSTINIT_CMD_$SUF\"
-    eval test_cleanup=\"\$CLEANUP_$SUF\"
-    eval test_run_title=\"\$RUN_TITLE_$SUF\"
-    eval openvpn_conf=\"\$OPENVPN_CONF_$SUF\"
-    eval expect_ifconfig4=\"\$EXPECT_IFCONFIG4_$SUF\"
-    eval expect_ifconfig6=\"\$EXPECT_IFCONFIG6_$SUF\"
-    eval ping4_hosts=\"\$PING4_HOSTS_$SUF\"
-    eval ping6_hosts=\"\$PING6_HOSTS_$SUF\"
-
-    # If EXCEPT_IFCONFIG* variables for this test are missing, run an --up
-    # script to generate them dynamically.
-    if [ -z "$expect_ifconfig4" ] || [ -z "$expect_ifconfig6" ]; then
-        up="--setenv TESTNUM $SUF --setenv TOP_BUILDDIR ${top_builddir} --script-security 2 --up ${srcdir}/update_t_client_ips.sh"
-    else
-        up=""
-    fi
-
-    echo -e "\n### test run $SUF: '$test_run_title' ###\n"
-    fail_count=0
-
-    if [ -n "$test_prep" ]; then
-        echo -e "running preparation: '$test_prep'"
-        eval $test_prep
-    fi
-
-    echo "save pre-openvpn ifconfig + route"
-    get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_pre.txt
-
-    echo -e "\nrun pre-openvpn ping tests - targets must not be reachable..."
-    run_ping_tests 4 want_fail "$ping4_hosts"
-    run_ping_tests 6 want_fail "$ping6_hosts"
-    if [ "$fail_count" = 0 ] ; then
-        echo -e "OK.\n"
-    else
-	echo -e "FAIL: make sure that ping hosts are ONLY reachable via VPN, SKIP test $SUF".
-	exit_code=31
-	continue
-    fi
-
-    pidfile="${top_builddir}/tests/$LOGDIR/openvpn-$SUF.pid"
-    openvpn_conf="$openvpn_conf --writepid $pidfile $up"
-    echo " run openvpn $openvpn_conf"
-    echo "# src/openvpn/openvpn $openvpn_conf" >$LOGDIR/$SUF:openvpn.log
-    umask 022
-    $RUN_SUDO "${top_builddir}/src/openvpn/openvpn" $openvpn_conf >>$LOGDIR/$SUF:openvpn.log &
-    sudopid=$!
-
-    # Check if OpenVPN has initialized before continuing.  It will check every 3rd second up
-    # to $ovpn_init_check times.
-    ovpn_init_check=10
-    ovpn_init_success=0
-    while [ $ovpn_init_check -gt 0 ];
-    do
-       sleep 3  # Wait for OpenVPN to initialize and have had time to write the pid file
-       grep "Initialization Sequence Completed" $LOGDIR/$SUF:openvpn.log >/dev/null
-       if [ $? -eq 0 ]; then
-           ovpn_init_check=0
-           ovpn_init_success=1
-       fi
-       ovpn_init_check=$(( $ovpn_init_check - 1 ))
-    done
-
-    opid=`cat $pidfile`
-    if [ -n "$opid" ]; then
-        echo "  OpenVPN running with PID $opid"
-    else
-        echo "  Could not read OpenVPN PID file" >&2
-    fi
-
-    # If OpenVPN did not start
-    if [ $ovpn_init_success -ne 1 -o -z "$opid" ]; then
-        echo "$0:  OpenVPN did not initialize in a reasonable time" >&2
-        if [ -n "$opid" ]; then
-           $RUN_SUDO $KILL_EXEC $opid
-        fi
-        $RUN_SUDO $KILL_EXEC $sudopid
-	echo "tail -5 $SUF:openvpn.log" >&2
-	tail -5 $LOGDIR/$SUF:openvpn.log >&2
-	echo -e "\nFAIL. skip rest of sub-tests for test run $SUF.\n" >&2
-	trap - 0 1 2 3 15
-	SUMMARY_FAIL="$SUMMARY_FAIL $SUF"
-	exit_code=30
-	continue
-    fi
-
-    # make sure openvpn client is terminated in case shell exits
-    trap "$RUN_SUDO $KILL_EXEC $opid" 0
-    trap "$RUN_SUDO $KILL_EXEC $opid ; trap - 0 ; exit 1" 1 2 3 15
-
-    # compare whether anything changed in ifconfig/route setup?
-    echo "save ifconfig+route"
-    get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route.txt
-
-    echo -n "compare pre-openvpn ifconfig+route with current values..."
-    if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \
-	    $LOGDIR/$SUF:ifconfig_route.txt >/dev/null
-    then
-	fail "no differences between ifconfig/route before OpenVPN start and now."
-    else
-	echo -e " OK!\n"
-    fi
-
-    # post init script needed?
-    if [ -n "$test_postinit" ]; then
-        echo -e "running post-init cmd: '$test_postinit'"
-        eval $test_postinit
-    fi
-
-    # expected ifconfig values in there?
-    check_ifconfig 4 "$expect_ifconfig4"
-    check_ifconfig 6 "$expect_ifconfig6"
-
-    run_ping_tests 4 want_ok "$ping4_hosts"
-    run_ping_tests 6 want_ok "$ping6_hosts"
-    echo -e "ping tests done.\n"
-
-    echo "stopping OpenVPN"
-    $RUN_SUDO $KILL_EXEC $opid
-    wait $!
-    rc=$?
-    if [ $rc != 0 ] ; then
-	fail "OpenVPN return code $rc, expect 0"
-    fi
-
-    echo -e "\nsave post-openvpn ifconfig + route..."
-    get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_post.txt
-
-    echo -n "compare pre- and post-openvpn ifconfig + route..."
-    if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \
-	    $LOGDIR/$SUF:ifconfig_route_post.txt >$LOGDIR/$SUF:ifconfig_route_diff.txt
-    then
-	echo -e " OK.\n"
-    else
-	cat $LOGDIR/$SUF:ifconfig_route_diff.txt >&2
-	fail "differences between pre- and post-ifconfig/route"
-    fi
-    if [ "$fail_count" = 0 ] ; then
-        echo -e "test run $SUF: all tests OK.\n"
-	SUMMARY_OK="$SUMMARY_OK $SUF"
-    else
-	echo -e "test run $SUF: $fail_count test failures. FAIL.\n";
-	SUMMARY_FAIL="$SUMMARY_FAIL $SUF"
-	exit_code=30
-    fi
-
-    if [ -n "$test_cleanup" ]; then
-        echo -e "cleaning up: '$test_cleanup'"
-        eval $test_cleanup
-    fi
-
-done
-
-if [ -z "$SUMMARY_OK" ] ; then SUMMARY_OK=" none"; fi
-if [ -z "$SUMMARY_FAIL" ] ; then SUMMARY_FAIL=" none"; fi
-echo "Test sets succeded:$SUMMARY_OK."
-echo "Test sets failed:$SUMMARY_FAIL."
-
-# remove trap handler
-trap - 0 1 2 3 15
-exit $exit_code