diff options
Diffstat (limited to 'doc/openvpn.8')
| -rw-r--r-- | doc/openvpn.8 | 7343 |
1 files changed, 0 insertions, 7343 deletions
diff --git a/doc/openvpn.8 b/doc/openvpn.8 deleted file mode 100644 index 8038e1f..0000000 --- a/doc/openvpn.8 +++ /dev/null @@ -1,7343 +0,0 @@ -.\" OpenVPN -- An application to securely tunnel IP networks -.\" over a single TCP/UDP port, with support for SSL/TLS-based -.\" session authentication and key exchange, -.\" packet encryption, packet authentication, and -.\" packet compression. -.\" -.\" Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net> -.\" -.\" This program is free software; you can redistribute it and/or modify -.\" it under the terms of the GNU General Public License version 2 -.\" as published by the Free Software Foundation. -.\" -.\" This program is distributed in the hope that it will be useful, -.\" but WITHOUT ANY WARRANTY; without even the implied warranty of -.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.\" GNU General Public License for more details. -.\" -.\" You should have received a copy of the GNU General Public License along -.\" with this program; if not, write to the Free Software Foundation, Inc., -.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -.\" -.\" Manual page for openvpn -.\" -.\" SH section heading -.\" SS subsection heading -.\" LP paragraph -.\" IP indented paragraph -.\" TP hanging label -.\" -.\" .nf -- no formatting -.\" .fi -- resume formatting -.\" .ft 3 -- boldface -.\" .ft -- normal face -.\" .in +|-{n} -- indent -.\" -.\" Support macros - this is not present on all platforms -.\" Continuation line for .TP header. -.de TQ -. br -. ns -. TP \\$1\" no doublequotes around argument! -.. -.\" End of TQ macro -.TH openvpn 8 "28 February 2018" -.\"********************************************************* -.SH NAME -openvpn \- secure IP tunnel daemon. -.\"********************************************************* -.SH SYNOPSIS -.ft 3 -openvpn [ options ... ] -.ft -.\"********************************************************* -.SH INTRODUCTION -.LP -OpenVPN is an open source VPN daemon by James Yonan. -Because OpenVPN tries to -be a universal VPN tool offering a great deal of flexibility, -there are a lot of options on this manual page. -If you're new to OpenVPN, you might want to skip ahead to the -examples section where you will see how to construct simple -VPNs on the command line without even needing a configuration file. - -Also note that there's more documentation and examples on -the OpenVPN web site: -.I http://openvpn.net/ - -And if you would like to see a shorter version of this manual, -see the openvpn usage message which can be obtained by -running -.B openvpn -without any parameters. -.\"********************************************************* -.SH DESCRIPTION -.LP -OpenVPN is a robust and highly flexible VPN daemon. -OpenVPN supports SSL/TLS security, ethernet bridging, -TCP or UDP tunnel transport through proxies or NAT, -support for dynamic IP addresses and DHCP, -scalability to hundreds or thousands of users, -and portability to most major OS platforms. - -OpenVPN is tightly bound to the OpenSSL library, and derives much -of its crypto capabilities from it. - -OpenVPN supports -conventional encryption -using a pre\-shared secret key -.B (Static Key mode) -or -public key security -.B (SSL/TLS mode) -using client & server certificates. -OpenVPN also -supports non\-encrypted TCP/UDP tunnels. - -OpenVPN is designed to work with the -.B TUN/TAP -virtual networking interface that exists on most platforms. - -Overall, OpenVPN aims to offer many of the key features of IPSec but -with a relatively lightweight footprint. -.\"********************************************************* -.SH OPTIONS -OpenVPN allows any option to be placed either on the command line -or in a configuration file. Though all command line options are preceded -by a double\-leading\-dash ("\-\-"), this prefix can be removed when -an option is placed in a configuration file. -.\"********************************************************* -.TP -.B \-\-help -Show options. -.\"********************************************************* -.TP -.B \-\-config file -Load additional config options from -.B file -where each line corresponds to one command line option, -but with the leading '\-\-' removed. - -If -.B \-\-config file -is the only option to the openvpn command, -the -.B \-\-config -can be removed, and the command can be given as -.B openvpn file - -Note that -configuration files can be nested to a reasonable depth. - -Double quotation or single quotation characters ("", '') -can be used to enclose single parameters containing whitespace, -and "#" or ";" characters in the first column -can be used to denote comments. - -Note that OpenVPN 2.0 and higher performs backslash\-based shell -escaping for characters not in single quotations, -so the following mappings should be observed: - -.nf -.ft 3 -.in +4 -\\\\ Maps to a single backslash character (\\). -\\" Pass a literal doublequote character ("), don't - interpret it as enclosing a parameter. -\\[SPACE] Pass a literal space or tab character, don't - interpret it as a parameter delimiter. -.in -4 -.ft -.fi - -For example on Windows, use double backslashes to -represent pathnames: - -.nf -.ft 3 -.in +4 -secret "c:\\\\OpenVPN\\\\secret.key" -.in -4 -.ft -.fi - -For examples of configuration files, -see -.I http://openvpn.net/examples.html - -Here is an example configuration file: - -.nf -.ft 3 -.in +4 -# -# Sample OpenVPN configuration file for -# using a pre\-shared static key. -# -# '#' or ';' may be used to delimit comments. - -# Use a dynamic tun device. -dev tun - -# Our remote peer -remote mypeer.mydomain - -# 10.1.0.1 is our local VPN endpoint -# 10.1.0.2 is our remote VPN endpoint -ifconfig 10.1.0.1 10.1.0.2 - -# Our pre\-shared static key -secret static.key -.in -4 -.ft -.fi -.\"********************************************************* -.SS Tunnel Options: -.TP -.B \-\-mode m -Set OpenVPN major mode. By default, OpenVPN runs in -point\-to\-point mode ("p2p"). OpenVPN 2.0 introduces -a new mode ("server") which implements a multi\-client -server capability. -.\"********************************************************* -.TP -.B \-\-local host -Local host name or IP address for bind. -If specified, OpenVPN will bind to this address only. -If unspecified, OpenVPN will bind to all interfaces. -.\"********************************************************* -.TP -.B \-\-remote host [port] [proto] -Remote host name or IP address. On the client, multiple -.B \-\-remote -options may be specified for redundancy, each referring -to a different OpenVPN server. Specifying multiple -.B \-\-remote -options for this purpose is a special case of the more -general connection\-profile feature. See the -.B <connection> -documentation below. - -The OpenVPN client will try to connect to a server at -.B host:port -in the order specified by the list of -.B \-\-remote -options. - -.B proto -indicates the protocol to use when connecting with the -remote, and may be "tcp" or "udp". - -For forcing IPv4 or IPv6 connection suffix tcp or udp -with 4/6 like udp4/udp6/tcp4/tcp6. - -The client will move on to the next host in the list, -in the event of connection failure. -Note that at any given time, the OpenVPN client -will at most be connected to -one server. - -Note that since UDP is connectionless, connection failure -is defined by the -.B \-\-ping -and -.B \-\-ping\-restart -options. - -Note the following corner case: If you use multiple -.B \-\-remote -options, AND you are dropping root privileges on -the client with -.B \-\-user -and/or -.B \-\-group, -AND the client is running a non\-Windows OS, if the client needs -to switch to a different server, and that server pushes -back different TUN/TAP or route settings, the client may lack -the necessary privileges to close and reopen the TUN/TAP interface. -This could cause the client to exit with a fatal error. - -If -.B \-\-remote -is unspecified, OpenVPN will listen -for packets from any IP address, but will not act on those packets unless -they pass all authentication tests. This requirement for authentication -is binding on all potential peers, even those from known and supposedly -trusted IP addresses (it is very easy to forge a source IP address on -a UDP packet). - -When used in TCP mode, -.B \-\-remote -will act as a filter, rejecting connections from any host which does -not match -.B host. - -If -.B host -is a DNS name which resolves to multiple IP addresses, -OpenVPN will try them in the order that the system getaddrinfo() -presents them, so priorization and DNS randomization is done -by the system library. Unless an IP version is forced by the -protocol specification (4/6 suffix), OpenVPN will try both IPv4 -and IPv6 addresses, in the order getaddrinfo() returns them. -.\"********************************************************* -.TP -.B \-\-remote\-random\-hostname -Prepend a random string (6 bytes, 12 hex characters) to hostname to prevent -DNS caching. For example, "foo.bar.gov" would be modified to -"<random\-chars>.foo.bar.gov". -.\"********************************************************* -.TP -.B <connection> -Define a client connection -profile. Client connection profiles are groups of OpenVPN options that -describe how to connect to a given OpenVPN server. Client connection -profiles are specified within an OpenVPN configuration file, and -each profile is bracketed by -.B <connection> -and -.B </connection>. - -An OpenVPN client will try each connection profile sequentially -until it achieves a successful connection. - -.B \-\-remote\-random -can be used to initially "scramble" the connection -list. - -Here is an example of connection profile usage: - -.nf -.ft 3 -.in +4 -client -dev tun - -<connection> -remote 198.19.34.56 1194 udp -</connection> - -<connection> -remote 198.19.34.56 443 tcp -</connection> - -<connection> -remote 198.19.34.56 443 tcp -http\-proxy 192.168.0.8 8080 -</connection> - -<connection> -remote 198.19.36.99 443 tcp -http\-proxy 192.168.0.8 8080 -</connection> - -persist\-key -persist\-tun -pkcs12 client.p12 -remote\-cert\-tls server -verb 3 -.in -4 -.ft -.fi - -First we try to connect to a server at 198.19.34.56:1194 using UDP. -If that fails, we then try to connect to 198.19.34.56:443 using TCP. -If that also fails, then try connecting through an HTTP proxy at -192.168.0.8:8080 to 198.19.34.56:443 using TCP. Finally, try to -connect through the same proxy to a server at 198.19.36.99:443 -using TCP. - -The following OpenVPN options may be used inside of -a -.B <connection> -block: - -.B bind, -.B connect\-retry, -.B connect\-retry\-max, -.B connect\-timeout, -.B explicit\-exit\-notify, -.B float, -.B fragment, -.B http\-proxy, -.B http\-proxy\-option, -.B link\-mtu, -.B local, -.B lport, -.B mssfix, -.B mtu\-disc, -.B nobind, -.B port, -.B proto, -.B remote, -.B rport, -.B socks\-proxy, -.B tun\-mtu and -.B tun\-mtu\-extra. - -A defaulting mechanism exists for specifying options to apply to -all -.B <connection> -profiles. If any of the above options (with the exception of -.B remote -) appear outside of a -.B <connection> -block, but in a configuration file which has one or more -.B <connection> -blocks, the option setting will be used as a default for -.B <connection> -blocks which follow it in the configuration file. - -For example, suppose the -.B nobind -option were placed in the sample configuration file above, near -the top of the file, before the first -.B <connection> -block. The effect would be as if -.B nobind -were declared in all -.B <connection> -blocks below it. -.\"********************************************************* -.TP -.B \-\-proto\-force p -When iterating through connection profiles, -only consider profiles using protocol -.B p -('tcp'|'udp'). -.\"********************************************************* -.TP -.B \-\-remote\-random -When multiple -.B \-\-remote -address/ports are specified, or if connection profiles are being -used, initially randomize the order of the list -as a kind of basic load\-balancing measure. -.\"********************************************************* -.TP -.B \-\-proto p -Use protocol -.B p -for communicating with remote host. -.B p -can be -.B udp, -.B tcp\-client, -or -.B tcp\-server. - -The default protocol is -.B udp -when -.B \-\-proto -is not specified. - -For UDP operation, -.B \-\-proto udp -should be specified on both peers. - -For TCP operation, one peer must use -.B \-\-proto tcp\-server -and the other must use -.B \-\-proto tcp\-client. -A peer started with -.B tcp\-server -will wait indefinitely for an incoming connection. A peer -started with -.B tcp\-client -will attempt to connect, and if that fails, will sleep for 5 -seconds (adjustable via the -.B \-\-connect\-retry -option) and try again infinite or up to N retries (adjustable via the -.B \-\-connect\-retry\-max -option). Both TCP client and server will simulate -a SIGUSR1 restart signal if either side resets the connection. - -OpenVPN is designed to operate optimally over UDP, but TCP capability is provided -for situations where UDP cannot be used. -In comparison with UDP, TCP will usually be -somewhat less efficient and less robust when used over unreliable or congested -networks. - -This article outlines some of problems with tunneling IP over TCP: - -.I http://sites.inka.de/sites/bigred/devel/tcp\-tcp.html - -There are certain cases, however, where using TCP may be advantageous from -a security and robustness perspective, such as tunneling non\-IP or -application\-level UDP protocols, or tunneling protocols which don't -possess a built\-in reliability layer. -.\"********************************************************* -.TP -.B \-\-connect\-retry n [max] -Wait -.B n -seconds between connection attempts (default=5). Repeated reconnection -attempts are slowed down after 5 retries per remote by doubling the wait -time after each unsuccessful attempt. The optional argument -.B max -specifies the maximum value of wait time in seconds at which it gets -capped (default=300). -.\"********************************************************* -.TP -.B \-\-connect\-retry\-max n -.B n -specifies the number of times each -.B \-\-remote -or -.B <connection> -entry is tried. Specifying -.B n -as one would try each entry exactly once. A successful connection -resets the counter. (default=unlimited). -.\"********************************************************* -.TP -.B \-\-show\-proxy\-settings -Show sensed HTTP or SOCKS proxy settings. Currently, only Windows clients -support this option. -.\"********************************************************* -.TP -.B \-\-http\-proxy server port [authfile|'auto'|'auto\-nct'] [auth\-method] -Connect to remote host through an HTTP proxy at address -.B server -and port -.B port. -If HTTP Proxy\-Authenticate is required, -.B authfile -is a file containing a username and password on 2 lines, or -"stdin" to prompt from console. Its content can also be specified -in the config file with the -.B \-\-http\-proxy\-user\-pass -option. (See section on inline files) - -.B auth\-method -should be one of "none", "basic", or "ntlm". - -HTTP Digest authentication is supported as well, but only via -the -.B auto -or -.B auto\-nct -flags (below). - -The -.B auto -flag causes OpenVPN to automatically determine the -.B auth\-method -and query stdin or the management interface for -username/password credentials, if required. This flag -exists on OpenVPN 2.1 or higher. - -The -.B auto\-nct -flag (no clear\-text auth) instructs OpenVPN to automatically -determine the authentication method, but to reject weak -authentication protocols such as HTTP Basic Authentication. -.\"********************************************************* -.TP -.B \-\-http\-proxy\-option type [parm] -Set extended HTTP proxy options. -Repeat to set multiple options. - -.B VERSION version \-\- -Set HTTP version number to -.B version -(default=1.0). - -.B AGENT user\-agent \-\- -Set HTTP "User\-Agent" string to -.B user\-agent. - -.B CUSTOM\-HEADER name content \-\- -Adds the custom Header with -.B name -as name and -.B content -as the content of the custom HTTP header. -.\"********************************************************* -.TP -.B \-\-socks\-proxy server [port] [authfile] -Connect to remote host through a Socks5 proxy at address -.B server -and port -.B port -(default=1080). -.B authfile -(optional) is a file containing a username and password on 2 lines, or -"stdin" to prompt from console. -.\"********************************************************* -.TP -.B \-\-resolv\-retry n -If hostname resolve fails for -.B \-\-remote, -retry resolve for -.B n -seconds before failing. - -Set -.B n -to "infinite" to retry indefinitely. - -By default, -.B \-\-resolv\-retry infinite -is enabled. You can disable by setting n=0. -.\"********************************************************* -.TP -.B \-\-float -Allow remote peer to change its IP address and/or port number, such as due to -DHCP (this is the default if -.B \-\-remote -is not used). -.B \-\-float -when specified with -.B \-\-remote -allows an OpenVPN session to initially connect to a peer -at a known address, however if packets arrive from a new -address and pass all authentication tests, the new address -will take control of the session. This is useful when -you are connecting to a peer which holds a dynamic address -such as a dial\-in user or DHCP client. - -Essentially, -.B \-\-float -tells OpenVPN to accept authenticated packets -from any address, not only the address which was specified in the -.B \-\-remote -option. -.\"********************************************************* -.TP -.B \-\-ipchange cmd -Run command -.B cmd -when our remote ip\-address is initially authenticated or -changes. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -When -.B cmd -is executed two arguments are appended after any arguments specified in -.B cmd -, as follows: - -.B cmd ip_address port_number - -Don't use -.B \-\-ipchange -in -.B \-\-mode server -mode. Use a -.B \-\-client\-connect -script instead. - -See the "Environmental Variables" section below for -additional parameters passed as environmental variables. - -If you are running in a dynamic IP address environment where -the IP addresses of either peer could change without notice, -you can use this script, for example, to edit the -.I /etc/hosts -file with the current address of the peer. The script will -be run every time the remote peer changes its IP address. - -Similarly if -.I our -IP address changes due to DHCP, we should configure -our IP address change script (see man page for -.BR dhcpcd (8) -) to deliver a -.B SIGHUP -or -.B SIGUSR1 -signal to OpenVPN. OpenVPN will then -reestablish a connection with its most recently authenticated -peer on its new IP address. -.\"********************************************************* -.TP -.B \-\-port port -TCP/UDP port number or port name for both local and remote (sets both -.B \-\-lport -and -.B \-\-rport -options to given port). The current -default of 1194 represents the official IANA port number -assignment for OpenVPN and has been used since version 2.0\-beta17. -Previous versions used port 5000 as the default. -.\"********************************************************* -.TP -.B \-\-lport port -Set local TCP/UDP port number or name. Cannot be used together with -.B \-\-nobind -option. -.\"********************************************************* -.TP -.B \-\-rport port -Set TCP/UDP port number or name used by the -.B \-\-remote -option. The port can also be set directly using the -.B \-\-remote -option. -.\"********************************************************* -.TP -.B \-\-bind [ipv6only] -Bind to local address and port. This is the default unless any of -.B \-\-proto tcp\-client -, -.B \-\-http\-proxy -or -.B \-\-socks\-proxy -are used. - -If the -.B ipv6only -keyword is present OpenVPN will bind only to IPv6 (as oposed -to IPv6 and IPv4) when a IPv6 socket is opened. - -.\"********************************************************* -.TP -.B \-\-nobind -Do not bind to local address and port. The IP stack will allocate -a dynamic port for returning packets. Since the value of the dynamic port -could not be known in advance by a peer, this option is only suitable for -peers which will be initiating connections by using the -.B \-\-remote -option. -.\"********************************************************* -.TP -.B \-\-dev tunX | tapX | null -TUN/TAP virtual network device ( -.B X -can be omitted for a dynamic device.) - -See examples section below -for an example on setting up a TUN device. - -You must use either tun devices on both ends of the connection -or tap devices on both ends. You cannot mix them, as they -represent different underlying network layers. - -.B tun -devices encapsulate IPv4 or IPv6 (OSI Layer 3) while -.B tap -devices encapsulate Ethernet 802.3 (OSI Layer 2). -.\"********************************************************* -.TP -.B \-\-dev\-type device\-type -Which device type are we using? -.B device\-type -should be -.B tun -(OSI Layer 3) -or -.B tap -(OSI Layer 2). -Use this option only if the TUN/TAP device used with -.B \-\-dev -does not begin with -.B tun -or -.B tap. -.\"********************************************************* -.TP -.B \-\-topology mode -Configure virtual addressing topology when running in -.B \-\-dev tun -mode. This directive has no meaning in -.B \-\-dev tap -mode, which always uses a -.B subnet -topology. - -If you set this directive on the server, the -.B \-\-server -and -.B \-\-server\-bridge -directives will automatically push your chosen topology setting to clients -as well. This directive can also be manually pushed to clients. Like the -.B \-\-dev -directive, this directive must always be compatible between client and server. - -.B mode -can be one of: - -.B net30 \-\- -Use a point\-to\-point topology, by allocating one /30 subnet per client. -This is designed to allow point\-to\-point semantics when some -or all of the connecting clients might be Windows systems. This is the -default on OpenVPN 2.0. - -.B p2p \-\- -Use a point\-to\-point topology where the remote endpoint of the client's -tun interface always points to the local endpoint of the server's tun interface. -This mode allocates a single IP address per connecting client. -Only use -when none of the connecting clients are Windows systems. This mode -is functionally equivalent to the -.B \-\-ifconfig\-pool\-linear -directive which is available in OpenVPN 2.0, is deprecated and will be -removed in OpenVPN 2.5 - -.B subnet \-\- -Use a subnet rather than a point\-to\-point topology by -configuring the tun interface with a local IP address and subnet mask, -similar to the topology used in -.B \-\-dev tap -and ethernet bridging mode. -This mode allocates a single IP address per connecting client and works on -Windows as well. Only available when server and clients are OpenVPN 2.1 or -higher, or OpenVPN 2.0.x which has been manually patched with the -.B \-\-topology -directive code. When used on Windows, requires version 8.2 or higher -of the TAP\-Win32 driver. When used on *nix, requires that the tun -driver supports an -.BR ifconfig (8) -command which sets a subnet instead of a remote endpoint IP address. - -This option exists in OpenVPN 2.1 or higher. - -Note: Using -.B \-\-topology subnet -changes the interpretation of the arguments of -.B \-\-ifconfig -to mean "address netmask", no longer "local remote". -.\"********************************************************* -.TP -.B \-\-dev\-node node -Explicitly set the device node rather than using -/dev/net/tun, /dev/tun, /dev/tap, etc. If OpenVPN -cannot figure out whether -.B node -is a TUN or TAP device based on the name, you should -also specify -.B \-\-dev\-type tun -or -.B \-\-dev\-type tap. - -Under Mac OS X this option can be used to specify the default tun -implementation. Using -.B \-\-dev\-node utun -forces usage of the native Darwin tun kernel support. Use -.B \-\-dev\-node utunN -to select a specific utun instance. To force using the tun.kext (/dev/tunX) use -.B \-\-dev\-node tun\fR. -When not specifying a -.B \-\-dev\-node -option openvpn will first try to open utun, and fall back to tun.kext. - -On Windows systems, select the TAP\-Win32 adapter which -is named -.B node -in the Network Connections Control Panel or the -raw GUID of the adapter enclosed by braces. -The -.B \-\-show\-adapters -option under Windows can also be used -to enumerate all available TAP\-Win32 -adapters and will show both the network -connections control panel name and the GUID for -each TAP\-Win32 adapter. -.TP -.B \-\-lladdr address -Specify the link layer address, more commonly known as the MAC address. -Only applied to TAP devices. -.\"********************************************************* -.TP -.B \-\-iproute cmd -Set alternate command to execute instead of default iproute2 command. -May be used in order to execute OpenVPN in unprivileged environment. -.\"********************************************************* -.TP -.B \-\-ifconfig l rn -Set TUN/TAP adapter parameters. -.B l -is the IP address of the local VPN endpoint. -For TUN devices in point\-to\-point mode, -.B rn -is the IP address of the remote VPN endpoint. -For TAP devices, or TUN devices used with -.B \-\-topology subnet, -.B rn -is the subnet mask of the virtual network segment -which is being created or connected to. - -For TUN devices, which facilitate virtual -point\-to\-point IP connections (when used in -.B \-\-topology net30 -or -.B p2p -mode), -the proper usage of -.B \-\-ifconfig -is to use two private IP addresses -which are not a member of any -existing subnet which is in use. -The IP addresses may be consecutive -and should have their order reversed -on the remote peer. After the VPN -is established, by pinging -.B rn, -you will be pinging across the VPN. - -For TAP devices, which provide -the ability to create virtual -ethernet segments, or TUN devices in -.B \-\-topology subnet -mode (which create virtual "multipoint networks"), -.B \-\-ifconfig -is used to set an IP address and -subnet mask just as a physical -ethernet adapter would be -similarly configured. If you are -attempting to connect to a remote -ethernet bridge, the IP address -and subnet should be set to values -which would be valid on the -the bridged ethernet segment (note -also that DHCP can be used for the -same purpose). - -This option, while primarily a proxy for the -.BR ifconfig (8) -command, is designed to simplify TUN/TAP -tunnel configuration by providing a -standard interface to the different -ifconfig implementations on different -platforms. - -.B \-\-ifconfig -parameters which are IP addresses can -also be specified as a DNS or /etc/hosts -file resolvable name. - -For TAP devices, -.B \-\-ifconfig -should not be used if the TAP interface will be -getting an IP address lease from a DHCP -server. -.\"********************************************************* -.TP -.B \-\-ifconfig\-noexec -Don't actually execute ifconfig/netsh commands, instead -pass -.B \-\-ifconfig -parameters to scripts using environmental variables. -.\"********************************************************* -.TP -.B \-\-ifconfig\-nowarn -Don't output an options consistency check warning -if the -.B \-\-ifconfig -option on this side of the -connection doesn't match the remote side. This is useful -when you want to retain the overall benefits of the -options consistency check (also see -.B \-\-disable\-occ -option) while only disabling the ifconfig component of -the check. - -For example, -if you have a configuration where the local host uses -.B \-\-ifconfig -but the remote host does not, use -.B \-\-ifconfig\-nowarn -on the local host. - -This option will also silence warnings about potential -address conflicts which occasionally annoy more experienced -users by triggering "false positive" warnings. -.\"********************************************************* -.TP -.B \-\-route network/IP [netmask] [gateway] [metric] -Add route to routing table after connection is established. -Multiple routes can be specified. Routes will be -automatically torn down in reverse order prior to -TUN/TAP device close. - -This option is intended as -a convenience proxy for the -.BR route (8) -shell command, -while at the same time providing portable semantics -across OpenVPN's platform space. - -.B netmask -default \-\- 255.255.255.255 - -.B gateway -default \-\- taken from -.B \-\-route\-gateway -or the second parameter to -.B \-\-ifconfig -when -.B \-\-dev tun -is specified. - -.B metric -default \-\- taken from -.B \-\-route\-metric -otherwise 0. - -The default can be specified by leaving an option blank or setting -it to "default". - -The -.B network -and -.B gateway -parameters can -also be specified as a DNS or /etc/hosts -file resolvable name, or as one of three special keywords: - -.B vpn_gateway -\-\- The remote VPN endpoint address -(derived either from -.B \-\-route\-gateway -or the second parameter to -.B \-\-ifconfig -when -.B \-\-dev tun -is specified). - -.B net_gateway -\-\- The pre\-existing IP default gateway, read from the routing -table (not supported on all OSes). - -.B remote_host -\-\- The -.B \-\-remote -address if OpenVPN is being run in client mode, and is undefined in server mode. -.\"********************************************************* -.TP -.B \-\-route\-gateway gw|'dhcp' -Specify a default gateway -.B gw -for use with -.B \-\-route. - -If -.B dhcp -is specified as the parameter, -the gateway address will be extracted from a DHCP -negotiation with the OpenVPN server\-side LAN. -.\"********************************************************* -.TP -.B \-\-route\-metric m -Specify a default metric -.B m -for use with -.B \-\-route. -.\"********************************************************* -.TP -.B \-\-route\-delay [n] [w] -Delay -.B n -seconds (default=0) after connection -establishment, before adding routes. If -.B n -is 0, routes will be added immediately upon connection -establishment. If -.B \-\-route\-delay -is omitted, routes will be added immediately after TUN/TAP device -open and -.B \-\-up -script execution, before any -.B \-\-user -or -.B \-\-group -privilege downgrade (or -.B \-\-chroot -execution.) - -This option is designed to be useful in scenarios where DHCP is -used to set -tap adapter addresses. The delay will give the DHCP handshake -time to complete before routes are added. - -On Windows, -.B \-\-route\-delay -tries to be more intelligent by waiting -.B w -seconds (w=30 by default) -for the TAP\-Win32 adapter to come up before adding routes. -.\"********************************************************* -.TP -.B \-\-route\-up cmd -Run command -.B cmd -after routes are added, subject to -.B \-\-route\-delay. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -See the "Environmental Variables" section below for -additional parameters passed as environmental variables. -.\"********************************************************* -.TP -.B \-\-route\-pre\-down cmd -Run command -.B cmd -before routes are removed upon disconnection. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -See the "Environmental Variables" section below for -additional parameters passed as environmental variables. -.\"********************************************************* -.TP -.B \-\-route\-noexec -Don't add or remove routes automatically. Instead pass routes to -.B \-\-route\-up -script using environmental variables. -.\"********************************************************* -.TP -.B \-\-route\-nopull -When used with -.B \-\-client -or -.B \-\-pull, -accept options pushed by server EXCEPT for routes, block\-outside\-dns and dhcp -options like DNS servers. - -When used on the client, this option effectively bars the -server from adding routes to the client's routing table, -however note that this option still allows the server -to set the TCP/IP properties of the client's TUN/TAP interface. -.\"********************************************************* -.TP -.B \-\-allow\-pull\-fqdn -Allow client to pull DNS names from server (rather than being limited -to IP address) for -.B \-\-ifconfig, -.B \-\-route, -and -.B \-\-route\-gateway. -.\"********************************************************* -.TP -.B \-\-client\-nat snat|dnat network netmask alias -This pushable client option sets up a stateless one\-to\-one NAT -rule on packet addresses (not ports), and is useful in cases -where routes or ifconfig settings pushed to the client would -create an IP numbering conflict. - -.B network/netmask -(for example 192.168.0.0/255.255.0.0) -defines the local view of a resource from the client perspective, while -.B alias/netmask -(for example 10.64.0.0/255.255.0.0) -defines the remote view from the server perspective. - -Use -.B snat -(source NAT) for resources owned by the client and -.B dnat -(destination NAT) for remote resources. - -Set -.B \-\-verb 6 -for debugging info showing the transformation of src/dest -addresses in packets. -.\"********************************************************* -.TP -.B \-\-redirect\-gateway flags... -Automatically execute routing commands to cause all outgoing IP traffic -to be redirected over the VPN. This is a client\-side option. - -This option performs three steps: - -.B (1) -Create a static route for the -.B \-\-remote -address which forwards to the pre\-existing default gateway. -This is done so that -.B (3) -will not create a routing loop. - -.B (2) -Delete the default gateway route. - -.B (3) -Set the new default gateway to be the VPN endpoint address (derived either from -.B \-\-route\-gateway -or the second parameter to -.B \-\-ifconfig -when -.B \-\-dev tun -is specified). - -When the tunnel is torn down, all of the above steps are reversed so -that the original default route is restored. - -Option flags: - -.B local \-\- -Add the -.B local -flag if both OpenVPN peers are directly connected via a common subnet, -such as with wireless. The -.B local -flag will cause step -.B 1 -above to be omitted. - -.B autolocal \-\- -Try to automatically determine whether to enable -.B local -flag above. - -.B def1 \-\- -Use this flag to override -the default gateway by using 0.0.0.0/1 and 128.0.0.0/1 -rather than 0.0.0.0/0. This has the benefit of overriding -but not wiping out the original default gateway. - -.B bypass\-dhcp \-\- -Add a direct route to the DHCP server (if it is non\-local) which -bypasses the tunnel -(Available on Windows clients, may not be available -on non\-Windows clients). - -.B bypass\-dns \-\- -Add a direct route to the DNS server(s) (if they are non\-local) which -bypasses the tunnel -(Available on Windows clients, may not be available -on non\-Windows clients). - -.B block\-local \-\- -Block access to local LAN when the tunnel is active, except for -the LAN gateway itself. This is accomplished by routing the local -LAN (except for the LAN gateway address) into the tunnel. - -.B ipv6 \-\- -Redirect IPv6 routing into the tunnel. This works similar to the -.B def1 -flag, that is, more specific IPv6 routes are added (2000::/4, 3000::/4), -covering the whole IPv6 unicast space. - -.B !ipv4 \-\- -Do not redirect IPv4 traffic \- typically used in the flag pair -.B "ipv6 !ipv4" -to redirect IPv6\-only. -.\"********************************************************* -.TP -.B \-\-link\-mtu n -Sets an upper bound on the size of UDP packets which are sent -between OpenVPN peers. It's best not to set this parameter unless -you know what you're doing. -.\"********************************************************* -.\"********************************************************* -.TP -.B \-\-redirect\-private [flags] -Like \-\-redirect\-gateway, but omit actually changing the default -gateway. Useful when pushing private subnets. -.\"********************************************************* -.TP -.B \-\-tun\-mtu n -Take the TUN device MTU to be -.B n -and derive the link MTU -from it (default=1500). In most cases, you will probably want to -leave this parameter set to its default value. - -The MTU (Maximum Transmission Units) is -the maximum datagram size in bytes that can be sent unfragmented -over a particular network path. OpenVPN requires that packets -on the control or data channels be sent unfragmented. - -MTU problems often manifest themselves as connections which -hang during periods of active usage. - -It's best to use the -.B \-\-fragment -and/or -.B \-\-mssfix -options to deal with MTU sizing issues. -.\"********************************************************* -.TP -.B \-\-tun\-mtu\-extra n -Assume that the TUN/TAP device might return as many as -.B n -bytes more than the -.B \-\-tun\-mtu -size on read. This parameter defaults to 0, which is sufficient for -most TUN devices. TAP devices may introduce additional overhead in excess -of the MTU size, and a setting of 32 is the default when TAP devices are used. -This parameter only controls internal OpenVPN buffer sizing, -so there is no transmission overhead associated with using a larger value. -.\"********************************************************* -.TP -.B \-\-mtu\-disc type -Should we do Path MTU discovery on TCP/UDP channel? Only supported on OSes such -as Linux that supports the necessary system call to set. - -.B 'no' -\-\- Never send DF (Don't Fragment) frames -.br -.B 'maybe' -\-\- Use per\-route hints -.br -.B 'yes' -\-\- Always DF (Don't Fragment) -.br -.\"********************************************************* -.TP -.B \-\-mtu\-test -To empirically measure MTU on connection startup, -add the -.B \-\-mtu\-test -option to your configuration. -OpenVPN will send ping packets of various sizes -to the remote peer and measure the largest packets -which were successfully received. The -.B \-\-mtu\-test -process normally takes about 3 minutes to complete. -.\"********************************************************* -.TP -.B \-\-fragment max -Enable internal datagram fragmentation so -that no UDP datagrams are sent which -are larger than -.B max -bytes. - -The -.B max -parameter is interpreted in the same way as the -.B \-\-link\-mtu -parameter, i.e. the UDP packet size after encapsulation -overhead has been added in, but not including -the UDP header itself. - -The -.B \-\-fragment -option only makes sense when you are using the UDP protocol ( -.B \-\-proto udp -). - -.B \-\-fragment -adds 4 bytes of overhead per datagram. - -See the -.B \-\-mssfix -option below for an important related option to -.B \-\-fragment. - -It should also be noted that this option is not meant to replace -UDP fragmentation at the IP stack level. It is only meant as a -last resort when path MTU discovery is broken. Using this option -is less efficient than fixing path MTU discovery for your IP link and -using native IP fragmentation instead. - -Having said that, there are circumstances where using OpenVPN's -internal fragmentation capability may be your only option, such -as tunneling a UDP multicast stream which requires fragmentation. -.\"********************************************************* -.TP -.B \-\-mssfix max -Announce to TCP sessions running over the tunnel that they should limit -their send packet sizes such that after OpenVPN has encapsulated them, -the resulting UDP packet size that OpenVPN sends to its peer will not -exceed -.B max -bytes. The default value is -.B 1450. - -The -.B max -parameter is interpreted in the same way as the -.B \-\-link\-mtu -parameter, i.e. the UDP packet size after encapsulation -overhead has been added in, but not including -the UDP header itself. Resulting packet would be at most 28 -bytes larger for IPv4 and 48 bytes for IPv6 (20/40 bytes for IP -header and 8 bytes for UDP header). Default value of 1450 allows -IPv4 packets to be transmitted over a link with MTU 1473 or higher -without IP level fragmentation. - -The -.B \-\-mssfix -option only makes sense when you are using the UDP protocol -for OpenVPN peer\-to\-peer communication, i.e. -.B \-\-proto udp. - -.B \-\-mssfix -and -.B \-\-fragment -can be ideally used together, where -.B \-\-mssfix -will try to keep TCP from needing -packet fragmentation in the first place, -and if big packets come through anyhow -(from protocols other than TCP), -.B \-\-fragment -will internally fragment them. - -Both -.B \-\-fragment -and -.B \-\-mssfix -are designed to work around cases where Path MTU discovery -is broken on the network path between OpenVPN peers. - -The usual symptom of such a breakdown is an OpenVPN -connection which successfully starts, but then stalls -during active usage. - -If -.B \-\-fragment -and -.B \-\-mssfix -are used together, -.B \-\-mssfix -will take its default -.B max -parameter from the -.B \-\-fragment max -option. - -Therefore, one could lower the maximum UDP packet size -to 1300 (a good first try for solving MTU\-related -connection problems) with the following options: - -.B \-\-tun\-mtu 1500 \-\-fragment 1300 \-\-mssfix -.\"********************************************************* -.TP -.B \-\-sndbuf size -Set the TCP/UDP socket send buffer size. -Defaults to operation system default. -.\"********************************************************* -.TP -.B \-\-rcvbuf size -Set the TCP/UDP socket receive buffer size. -Defaults to operation system default. -.\"********************************************************* -.TP -.B \-\-mark value -Mark encrypted packets being sent with value. The mark value can be -matched in policy routing and packetfilter rules. This option is -only supported in Linux and does nothing on other operating systems. -.\"********************************************************* -.TP -.B \-\-socket\-flags flags... -Apply the given flags to the OpenVPN transport socket. -Currently, only -.B TCP_NODELAY -is supported. - -The -.B TCP_NODELAY -socket flag is useful in TCP mode, and causes the kernel -to send tunnel packets immediately over the TCP connection without -trying to group several smaller packets into a larger packet. -This can result in a considerably improvement in latency. - -This option is pushable from server to client, and should be used -on both client and server for maximum effect. -.\"********************************************************* -.TP -.B \-\-txqueuelen n -(Linux only) Set the TX queue length on the TUN/TAP interface. -Currently defaults to 100. -.\"********************************************************* -.TP -.B \-\-shaper n -Limit bandwidth of outgoing tunnel data to -.B n -bytes per second on the TCP/UDP port. -Note that this will only work if mode is set to p2p. -If you want to limit the bandwidth -in both directions, use this option on both peers. - -OpenVPN uses the following algorithm to implement -traffic shaping: Given a shaper rate of -.I n -bytes per second, after a datagram write of -.I b -bytes is queued on the TCP/UDP port, wait a minimum of -.I (b / n) -seconds before queuing the next write. - -It should be noted that OpenVPN supports multiple -tunnels between the same two peers, allowing you -to construct full\-speed and reduced bandwidth tunnels -at the same time, -routing low\-priority data such as off\-site backups -over the reduced bandwidth tunnel, and other data -over the full\-speed tunnel. - -Also note that for low bandwidth tunnels -(under 1000 bytes per second), you should probably -use lower MTU values as well (see above), otherwise -the packet latency will grow so large as to trigger -timeouts in the TLS layer and TCP connections running -over the tunnel. - -OpenVPN allows -.B n -to be between 100 bytes/sec and 100 Mbytes/sec. -.\"********************************************************* -.TP -.B \-\-inactive n [bytes] -Causes OpenVPN to exit after -.B n -seconds of inactivity on the TUN/TAP device. The time length of -inactivity is measured since the last incoming or outgoing tunnel -packet. The default value is 0 seconds, which disables this feature. - -If the optional -.B bytes -parameter is included, -exit if less than -.B bytes -of combined in/out traffic are produced on the tun/tap device -in -.B n -seconds. - -In any case, OpenVPN's internal ping packets (which are just -keepalives) and TLS control packets are not considered -"activity", nor are they counted as traffic, as they are used -internally by OpenVPN and are not an indication of actual user -activity. -.\"********************************************************* -.TP -.B \-\-ping n -Ping remote over the TCP/UDP control channel -if no packets have been sent for at least -.B n -seconds (specify -.B \-\-ping -on both peers to cause ping packets to be sent in both directions since -OpenVPN ping packets are not echoed like IP ping packets). -When used in one of OpenVPN's secure modes (where -.B \-\-secret, \-\-tls\-server, -or -.B \-\-tls\-client -is specified), the ping packet -will be cryptographically secure. - -This option has two intended uses: - -(1) Compatibility -with stateful firewalls. The periodic ping will ensure that -a stateful firewall rule which allows OpenVPN UDP packets to -pass will not time out. - -(2) To provide a basis for the remote to test the existence -of its peer using the -.B \-\-ping\-exit -option. -.\"********************************************************* -.TP -.B \-\-ping\-exit n -Causes OpenVPN to exit after -.B n -seconds pass without reception of a ping -or other packet from remote. -This option can be combined with -.B \-\-inactive, \-\-ping, -and -.B \-\-ping\-exit -to create a two\-tiered inactivity disconnect. - -For example, - -.B openvpn [options...] \-\-inactive 3600 \-\-ping 10 \-\-ping\-exit 60 - -when used on both peers will cause OpenVPN to exit within 60 -seconds if its peer disconnects, but will exit after one -hour if no actual tunnel data is exchanged. -.\"********************************************************* -.TP -.B \-\-ping\-restart n -Similar to -.B \-\-ping\-exit, -but trigger a -.B SIGUSR1 -restart after -.B n -seconds pass without reception of a ping -or other packet from remote. - -This option is useful in cases -where the remote peer has a dynamic IP address and -a low\-TTL DNS name is used to track the IP address using -a service such as -.I http://dyndns.org/ -+ a dynamic DNS client such -as -.B ddclient. - -If the peer cannot be reached, a restart will be triggered, causing -the hostname used with -.B \-\-remote -to be re\-resolved (if -.B \-\-resolv\-retry -is also specified). - -In server mode, -.B \-\-ping\-restart, \-\-inactive, -or any other type of internally generated signal will always be -applied to -individual client instance objects, never to whole server itself. -Note also in server mode that any internally generated signal -which would normally cause a restart, will cause the deletion -of the client instance object instead. - -In client mode, the -.B \-\-ping\-restart -parameter is set to 120 seconds by default. This default will -hold until the client pulls a replacement value from the server, based on -the -.B \-\-keepalive -setting in the server configuration. -To disable the 120 second default, set -.B \-\-ping\-restart 0 -on the client. - -See the signals section below for more information -on -.B SIGUSR1. - -Note that the behavior of -.B SIGUSR1 -can be modified by the -.B \-\-persist\-tun, \-\-persist\-key, \-\-persist\-local\-ip, -and -.B \-\-persist\-remote\-ip -options. - -Also note that -.B \-\-ping\-exit -and -.B \-\-ping\-restart -are mutually exclusive and cannot be used together. -.\"********************************************************* -.TP -.B \-\-keepalive interval timeout -A helper directive designed to simplify the expression of -.B \-\-ping -and -.B \-\-ping\-restart. - -This option can be used on both client and server side, but it is -enough to add this on the server side as it will push appropriate -.B \-\-ping -and -.B \-\-ping\-restart -options to the client. If used on both server and client, -the values pushed from server will override the client local values. - -The -.B timeout -argument will be twice as long on the server side. This ensures that -a timeout is detected on client side before the server side drops -the connection. - -For example, -.B \-\-keepalive 10 60 -expands as follows: - -.nf -.ft 3 -.in +4 - if mode server: - ping 10 # Argument: interval - ping\-restart 120 # Argument: timeout*2 - push "ping 10" # Argument: interval - push "ping\-restart 60" # Argument: timeout - else - ping 10 # Argument: interval - ping\-restart 60 # Argument: timeout -.in -4 -.ft -.fi -.\"********************************************************* -.TP -.B \-\-ping\-timer\-rem -Run the -.B \-\-ping\-exit -/ -.B \-\-ping\-restart -timer only if we have a remote address. Use this option if you are -starting the daemon in listen mode (i.e. without an explicit -.B \-\-remote -peer), and you don't want to start clocking timeouts until a remote -peer connects. -.\"********************************************************* -.TP -.B \-\-persist\-tun -Don't close and reopen TUN/TAP device or run up/down scripts -across -.B SIGUSR1 -or -.B \-\-ping\-restart -restarts. - -.B SIGUSR1 -is a restart signal similar to -.B SIGHUP, -but which offers finer\-grained control over -reset options. -.\"********************************************************* -.TP -.B \-\-persist\-key -Don't re\-read key files across -.B SIGUSR1 -or -.B \-\-ping\-restart. - -This option can be combined with -.B \-\-user nobody -to allow restarts triggered by the -.B SIGUSR1 -signal. -Normally if you drop root privileges in OpenVPN, -the daemon cannot be restarted since it will now be unable to re\-read protected -key files. - -This option solves the problem by persisting keys across -.B SIGUSR1 -resets, so they don't need to be re\-read. -.\"********************************************************* -.TP -.B \-\-persist\-local\-ip -Preserve initially resolved local IP address and port number -across -.B SIGUSR1 -or -.B \-\-ping\-restart -restarts. -.\"********************************************************* -.TP -.B \-\-persist\-remote\-ip -Preserve most recently authenticated remote IP address and port number -across -.B SIGUSR1 -or -.B \-\-ping\-restart -restarts. -.\"********************************************************* -.TP -.B \-\-mlock -Disable paging by calling the POSIX mlockall function. -Requires that OpenVPN be initially run as root (though -OpenVPN can subsequently downgrade its UID using the -.B \-\-user -option). - -Using this option ensures that key material and tunnel -data are never written to disk due to virtual -memory paging operations which occur under most -modern operating systems. It ensures that even if an -attacker was able to crack the box running OpenVPN, he -would not be able to scan the system swap file to -recover previously used -ephemeral keys, which are used for a period of time -governed by the -.B \-\-reneg -options (see below), then are discarded. - -The downside -of using -.B \-\-mlock -is that it will reduce the amount of physical -memory available to other applications. -.\"********************************************************* -.TP -.B \-\-up cmd -Run command -.B cmd -after successful TUN/TAP device open -(pre -.B \-\-user -UID change). - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -The up command is useful for specifying route -commands which route IP traffic destined for -private subnets which exist at the other -end of the VPN connection into the tunnel. - -For -.B \-\-dev tun -execute as: - -.B cmd tun_dev tun_mtu link_mtu ifconfig_local_ip ifconfig_remote_ip [ init | restart ] - -For -.B \-\-dev tap -execute as: - -.B cmd tap_dev tap_mtu link_mtu ifconfig_local_ip ifconfig_netmask [ init | restart ] - -See the "Environmental Variables" section below for -additional parameters passed as environmental variables. - -Note that if -.B cmd -includes arguments, all OpenVPN\-generated arguments will be appended -to them to build an argument list with which the executable will be -called. - -Typically, -.B cmd -will run a script to add routes to the tunnel. - -Normally the up script is called after the TUN/TAP device is opened. -In this context, the last command line parameter passed to the script -will be -.I init. -If the -.B \-\-up\-restart -option is also used, the up script will be called for restarts as -well. A restart is considered to be a partial reinitialization -of OpenVPN where the TUN/TAP instance is preserved (the -.B \-\-persist\-tun -option will enable such preservation). A restart -can be generated by a SIGUSR1 signal, a -.B \-\-ping\-restart -timeout, or a connection reset when the TCP protocol is enabled -with the -.B \-\-proto -option. If a restart occurs, and -.B \-\-up\-restart -has been specified, the up script will be called with -.I restart -as the last parameter. - -NOTE: on restart, OpenVPN will not pass the full set of environment -variables to the script. Namely, everything related to routing and -gateways will not be passed, as nothing needs to be done anyway \- all -the routing setup is already in place. Additionally, the up\-restart -script will run with the downgraded UID/GID settings (if configured). - -The following standalone example shows how the -.B \-\-up -script can be called in both an initialization and restart context. -(NOTE: for security reasons, don't run the following example unless UDP port -9999 is blocked by your firewall. Also, the example will run indefinitely, -so you should abort with control\-c). - -.B openvpn \-\-dev tun \-\-port 9999 \-\-verb 4 \-\-ping\-restart 10 \-\-up 'echo up' \-\-down 'echo down' \-\-persist\-tun \-\-up\-restart - -Note that OpenVPN also provides the -.B \-\-ifconfig -option to automatically ifconfig the TUN device, -eliminating the need to define an -.B \-\-up -script, unless you also want to configure routes -in the -.B \-\-up -script. - -If -.B \-\-ifconfig -is also specified, OpenVPN will pass the ifconfig local -and remote endpoints on the command line to the -.B \-\-up -script so that they can be used to configure routes such as: - -.B route add \-net 10.0.0.0 netmask 255.255.255.0 gw $5 -.\"********************************************************* -.TP -.B \-\-up\-delay -Delay TUN/TAP open and possible -.B \-\-up -script execution -until after TCP/UDP connection establishment with peer. - -In -.B \-\-proto udp -mode, this option normally requires the use of -.B \-\-ping -to allow connection initiation to be sensed in the absence -of tunnel data, since UDP is a "connectionless" protocol. - -On Windows, this option will delay the TAP\-Win32 media state -transitioning to "connected" until connection establishment, -i.e. the receipt of the first authenticated packet from the peer. -.\"********************************************************* -.TP -.B \-\-down cmd -Run command -.B cmd -after TUN/TAP device close -(post -.B \-\-user -UID change and/or -.B \-\-chroot -). -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -Called with the same parameters and environmental -variables as the -.B \-\-up -option above. - -Note that if you reduce privileges by using -.B \-\-user -and/or -.B \-\-group, -your -.B \-\-down -script will also run at reduced privilege. -.\"********************************************************* -.TP -.B \-\-down\-pre -Call -.B \-\-down -cmd/script before, rather than after, TUN/TAP close. -.\"********************************************************* -.TP -.B \-\-up\-restart -Enable the -.B \-\-up -and -.B \-\-down -scripts to be called for restarts as well as initial program start. -This option is described more fully above in the -.B \-\-up -option documentation. -.\"********************************************************* -.TP -.B \-\-setenv name value -Set a custom environmental variable -.B name=value -to pass to script. -.\"********************************************************* -.TP -.B \-\-setenv FORWARD_COMPATIBLE 1 -Relax config file syntax checking so that unknown directives -will trigger a warning but not a fatal error, -on the assumption that a given unknown directive might be valid -in future OpenVPN versions. - -This option should be used with caution, as there are good security -reasons for having OpenVPN fail if it detects problems in a -config file. Having said that, there are valid reasons for wanting -new software features to gracefully degrade when encountered by -older software versions. - -It is also possible to tag a single directive so as not to trigger -a fatal error if the directive isn't recognized. To do this, -prepend the following before the directive: -.B setenv opt - -Versions prior to OpenVPN 2.3.3 will always ignore options set with the -.B setenv opt -directive. - -See also -.B \-\-ignore\-unknown\-option -.\"********************************************************* -.TP -.B \-\-setenv\-safe name value -Set a custom environmental variable -.B OPENVPN_name=value -to pass to script. - -This directive is designed to be pushed by the server to clients, -and the prepending of "OPENVPN_" to the environmental variable -is a safety precaution to prevent a LD_PRELOAD style attack -from a malicious or compromised server. -.\"********************************************************* -.TP -.B \-\-ignore\-unknown\-option opt1 opt2 opt3 ... optN -When one of options -.B opt1 ... optN -is encountered in the configuration file the configuration -file parsing does not fail if this OpenVPN version does not -support the option. Multiple -.B \-\-ignore\-unknown\-option -options can be given to support a larger number of options to ignore. - -This option should be used with caution, as there are good security -reasons for having OpenVPN fail if it detects problems in a -config file. Having said that, there are valid reasons for wanting -new software features to gracefully degrade when encountered by -older software versions. - -.B \-\-ignore\-unknown\-option -is available since OpenVPN 2.3.3. -.\"********************************************************* -.TP -.B \-\-script\-security level -This directive offers policy\-level control over OpenVPN's usage of external programs -and scripts. Lower -.B level -values are more restrictive, higher values are more permissive. Settings for -.B level: - -.B 0 \-\- -Strictly no calling of external programs. -.br -.B 1 \-\- -(Default) Only call built\-in executables such as ifconfig, ip, route, or netsh. -.br -.B 2 \-\- -Allow calling of built\-in executables and user\-defined scripts. -.br -.B 3 \-\- -Allow passwords to be passed to scripts via environmental variables (potentially unsafe). - -OpenVPN releases before v2.3 also supported a -.B method -flag which indicated how OpenVPN should call external commands and scripts. This -could be either -.B execve -or -.B system. -As of OpenVPN 2.3, this flag is no longer accepted. In most *nix environments the execve() -approach has been used without any issues. - -Some directives such as \-\-up allow options to be passed to the external -script. In these cases make sure the script name does not contain any spaces or -the configuration parser will choke because it can't determine where the script -name ends and script options start. - -To run scripts in Windows in earlier OpenVPN -versions you needed to either add a full path to the script interpreter which can parse the -script or use the -.B system -flag to run these scripts. As of OpenVPN 2.3 it is now a strict requirement to have -full path to the script interpreter when running non\-executables files. -This is not needed for executable files, such as .exe, .com, .bat or .cmd files. For -example, if you have a Visual Basic script, you must use this syntax now: - -.nf -.ft 3 -.in +4 -\-\-up 'C:\\\\Windows\\\\System32\\\\wscript.exe C:\\\\Program\\ Files\\\\OpenVPN\\\\config\\\\my\-up\-script.vbs' -.in -4 -.ft -.fi - -Please note the single quote marks and the escaping of the backslashes (\\) and -the space character. - -The reason the support for the -.B system -flag was removed is due to the security implications with shell expansions -when executing scripts via the system() call. -.\"********************************************************* -.TP -.B \-\-disable\-occ -Don't output a warning message if option inconsistencies are detected between -peers. An example of an option inconsistency would be where one peer uses -.B \-\-dev tun -while the other peer uses -.B \-\-dev tap. - -Use of this option is discouraged, but is provided as -a temporary fix in situations where a recent version of OpenVPN must -connect to an old version. -.\"********************************************************* -.TP -.B \-\-user user -Change the user ID of the OpenVPN process to -.B user -after initialization, dropping privileges in the process. -This option is useful to protect the system -in the event that some hostile party was able to gain control of -an OpenVPN session. Though OpenVPN's security features make -this unlikely, it is provided as a second line of defense. - -By setting -.B user -to -.I nobody -or somebody similarly unprivileged, the hostile party would be -limited in what damage they could cause. Of course once -you take away privileges, you cannot return them -to an OpenVPN session. This means, for example, that if -you want to reset an OpenVPN daemon with a -.B SIGUSR1 -signal -(for example in response -to a DHCP reset), you should make use of one or more of the -.B \-\-persist -options to ensure that OpenVPN doesn't need to execute any privileged -operations in order to restart (such as re\-reading key files -or running -.BR ifconfig -on the TUN device). -.\"********************************************************* -.TP -.B \-\-group group -Similar to the -.B \-\-user -option, -this option changes the group ID of the OpenVPN process to -.B group -after initialization. -.\"********************************************************* -.TP -.B \-\-cd dir -Change directory to -.B dir -prior to reading any files such as -configuration files, key files, scripts, etc. -.B dir -should be an absolute path, with a leading "/", -and without any references -to the current directory such as "." or "..". - -This option is useful when you are running -OpenVPN in -.B \-\-daemon -mode, and you want to consolidate all of -your OpenVPN control files in one location. -.\"********************************************************* -.TP -.B \-\-chroot dir -Chroot to -.B dir -after initialization. -.B \-\-chroot -essentially redefines -.B dir -as being the top -level directory tree (/). OpenVPN will therefore -be unable to access any files outside this tree. -This can be desirable from a security standpoint. - -Since the chroot operation is delayed until after -initialization, most OpenVPN options that reference -files will operate in a pre\-chroot context. - -In many cases, the -.B dir -parameter can point to an empty directory, however -complications can result when scripts or restarts -are executed after the chroot operation. - -Note: The SSL library will probably need /dev/urandom to be available inside -the chroot directory -.B dir. -This is because SSL libraries occasionally need to collect fresh random. Newer -linux kernels and some BSDs implement a getrandom() or getentropy() syscall -that removes the need for /dev/urandom to be available. -.\"********************************************************* -.TP -.B \-\-setcon context -Apply SELinux -.B context -after initialization. This -essentially provides the ability to restrict OpenVPN's -rights to only network I/O operations, thanks to -SELinux. This goes further than -.B \-\-user -and -.B \-\-chroot -in that those two, while being great security features, -unfortunately do not protect against privilege escalation -by exploitation of a vulnerable system call. You can of -course combine all three, but please note that since -setcon requires access to /proc you will have to provide -it inside the chroot directory (e.g. with mount \-\-bind). - -Since the setcon operation is delayed until after -initialization, OpenVPN can be restricted to just -network\-related system calls, whereas by applying the -context before startup (such as the OpenVPN one provided -in the SELinux Reference Policies) you will have to -allow many things required only during initialization. - -Like with chroot, complications can result when scripts -or restarts are executed after the setcon operation, -which is why you should really consider using the -.B \-\-persist\-key -and -.B \-\-persist\-tun -options. -.\"********************************************************* -.TP -.B \-\-daemon [progname] -Become a daemon after all initialization functions are completed. -This option will cause all message and error output to -be sent to the syslog file (such as /var/log/messages), -except for the output of scripts and -ifconfig commands, -which will go to /dev/null unless otherwise redirected. -The syslog redirection occurs immediately at the point -that -.B \-\-daemon -is parsed on the command line even though -the daemonization point occurs later. If one of the -.B \-\-log -options is present, it will supercede syslog -redirection. - -The optional -.B progname -parameter will cause OpenVPN to report its program name -to the system logger as -.B progname. -This can be useful in linking OpenVPN messages -in the syslog file with specific tunnels. -When unspecified, -.B progname -defaults to "openvpn". - -When OpenVPN is run with the -.B \-\-daemon -option, it will try to delay daemonization until the majority of initialization -functions which are capable of generating fatal errors are complete. This means -that initialization scripts can test the return status of the -openvpn command for a fairly reliable indication of whether the command -has correctly initialized and entered the packet forwarding event loop. - -In OpenVPN, the vast majority of errors which occur after initialization are non\-fatal. - -Note: as soon as OpenVPN has daemonized, it can not ask for usernames, -passwords, or key pass phrases anymore. This has certain consequences, -namely that using a password\-protected private key will fail unless the -.B \-\-askpass -option is used to tell OpenVPN to ask for the pass phrase (this -requirement is new in v2.3.7, and is a consequence of calling daemon() -before initializing the crypto layer). - -Further, using -.B \-\-daemon -together with -.B \-\-auth\-user\-pass -(entered on console) and -.B \-\-auth\-nocache -will fail as soon as key renegotiation (and reauthentication) occurs. -.\"********************************************************* -.TP -.B \-\-syslog [progname] -Direct log output to system logger, but do not become a daemon. -See -.B \-\-daemon -directive above for description of -.B progname -parameter. -.TP -.B \-\-errors\-to\-stderr -Output errors to stderr instead of stdout unless log output is redirected by one of the -.B \-\-log -options. -.\"********************************************************* -.TP -.B \-\-passtos -Set the TOS field of the tunnel packet to what the payload's TOS is. -.\"********************************************************* -.TP -.B \-\-inetd [wait|nowait] [progname] -Use this option when OpenVPN is being run from the inetd or -.BR xinetd(8) -server. - -The -.B wait/nowait -option must match what is specified in the inetd/xinetd -config file. The -.B nowait -mode can only be used with -.B \-\-proto tcp\-server. -The default is -.B wait. -The -.B nowait -mode can be used to instantiate the OpenVPN daemon as a classic TCP server, -where client connection requests are serviced on a single -port number. For additional information on this kind of configuration, -see the OpenVPN FAQ: -.I http://openvpn.net/faq.html#oneport - -This option precludes the use of -.B \-\-daemon, \-\-local, -or -.B \-\-remote. -Note that this option causes message and error output to be handled in the same -way as the -.B \-\-daemon -option. The optional -.B progname -parameter is also handled exactly as in -.B \-\-daemon. - -Also note that in -.B wait -mode, each OpenVPN tunnel requires a separate TCP/UDP port and -a separate inetd or xinetd entry. See the OpenVPN 1.x HOWTO for an example -on using OpenVPN with xinetd: -.I http://openvpn.net/1xhowto.html -.\"********************************************************* -.TP -.B \-\-log file -Output logging messages to -.B file, -including output to stdout/stderr which -is generated by called scripts. -If -.B file -already exists it will be truncated. -This option takes effect -immediately when it is parsed in the command line -and will supercede syslog output if -.B \-\-daemon -or -.B \-\-inetd -is also specified. -This option is persistent over the entire course of -an OpenVPN instantiation and will not be reset by SIGHUP, -SIGUSR1, or -.B \-\-ping\-restart. - -Note that on Windows, when OpenVPN is started as a service, -logging occurs by default without the need to specify -this option. -.\"********************************************************* -.TP -.B \-\-log\-append file -Append logging messages to -.B file. -If -.B file -does not exist, it will be created. -This option behaves exactly like -.B \-\-log -except that it appends to rather -than truncating the log file. -.\"********************************************************* -.TP -.B \-\-suppress\-timestamps -Avoid writing timestamps to log messages, even when they -otherwise would be prepended. In particular, this applies to -log messages sent to stdout. -.\"********************************************************* -.TP -.B \-\-machine\-readable\-output -Always write timestamps and message flags to log messages, even when they -otherwise would not be prefixed. In particular, this applies to -log messages sent to stdout. -.\"********************************************************* -.TP -.B \-\-writepid file -Write OpenVPN's main process ID to -.B file. -.\"********************************************************* -.TP -.B \-\-nice n -Change process priority after initialization -( -.B n -greater than 0 is lower priority, -.B n -less than zero is higher priority). -.\"********************************************************* -.\".TP -.\".B \-\-nice\-work n -.\"Change priority of background TLS work thread. The TLS thread -.\"feature is enabled when OpenVPN is built -.\"with pthread support, and you are running OpenVPN -.\"in TLS mode (i.e. with -.\".B \-\-tls\-client -.\"or -.\".B \-\-tls\-server -.\"specified). -.\" -.\"Using a TLS thread offloads the CPU\-intensive process of SSL/TLS\-based -.\"key exchange to a background thread so that it does not become -.\"a latency bottleneck in the tunnel packet forwarding process. -.\" -.\"The parameter -.\".B n -.\"is interpreted exactly as with the -.\".B \-\-nice -.\"option above, but in relation to the work thread rather -.\"than the main thread. -.\"********************************************************* -.TP -.B \-\-fast\-io -(Experimental) Optimize TUN/TAP/UDP I/O writes by avoiding -a call to poll/epoll/select prior to the write operation. The purpose -of such a call would normally be to block until the device -or socket is ready to accept the write. Such blocking is unnecessary -on some platforms which don't support write blocking on UDP sockets -or TUN/TAP devices. In such cases, one can optimize the event loop -by avoiding the poll/epoll/select call, improving CPU efficiency -by 5% to 10%. - -This option can only be used on non\-Windows systems, when -.B \-\-proto udp -is specified, and when -.B \-\-shaper -is NOT specified. -.\"********************************************************* -.TP -.B \-\-multihome -Configure a multi\-homed UDP server. This option needs to be used when -a server has more than one IP address (e.g. multiple interfaces, or -secondary IP addresses), and is not using -.B \-\-local -to force binding to one specific address only. This option will -add some extra lookups to the packet path to ensure that the UDP reply -packets are always sent from the address that the client is -talking to. This is not supported on all platforms, and it adds more -processing, so it's not enabled by default. - -Note: this option is only relevant for UDP servers. - -Note 2: if you do an IPv6+IPv4 dual\-stack bind on a Linux machine with -multiple IPv4 address, connections to IPv4 addresses will not work -right on kernels before 3.15, due to missing kernel support for the -IPv4\-mapped case (some distributions have ported this to earlier kernel -versions, though). -.\"********************************************************* -.TP -.B \-\-echo [parms...] -Echo -.B parms -to log output. - -Designed to be used to send messages to a controlling application -which is receiving the OpenVPN log output. -.\"********************************************************* -.TP -.B \-\-remap\-usr1 signal -Control whether internally or externally -generated SIGUSR1 signals are remapped to -SIGHUP (restart without persisting state) or -SIGTERM (exit). - -.B signal -can be set to "SIGHUP" or "SIGTERM". By default, no remapping -occurs. -.\"********************************************************* -.TP -.B \-\-verb n -Set output verbosity to -.B n -(default=1). Each level shows all info from the previous levels. -Level 3 is recommended if you want a good summary -of what's happening without being swamped by output. - -.B 0 \-\- -No output except fatal errors. -.br -.B 1 to 4 \-\- -Normal usage range. -.br -.B 5 \-\- -Output -.B R -and -.B W -characters to the console for each packet read and write, uppercase is -used for TCP/UDP packets and lowercase is used for TUN/TAP packets. -.br -.B 6 to 11 \-\- -Debug info range (see errlevel.h for additional -information on debug levels). -.\"********************************************************* -.TP -.B \-\-status file [n] -Write operational status to -.B file -every -.B n -seconds. - -Status can also be written to the syslog by sending a -.B SIGUSR2 -signal. - -With multi\-client capability enabled on a server, the status file includes a -list of clients and a routing table. The output format can be controlled by the -.B \-\-status\-version -option in that case. - -For clients or instances running in point\-to\-point mode, it will contain the -traffic statistics. -.\"********************************************************* -.TP -.B \-\-status\-version [n] -Set the status file format version number to -.B n\fR. - -This only affects the status file on servers with multi\-client capability -enabled. - -.B 1 -\-\- traditional format (default). The client list contains the following -fields comma\-separated: Common Name, Real Address, Bytes Received, Bytes Sent, -Connected Since. -.br -.B 2 -\-\- a more reliable format for external processing. Compared to version 1, the -client list contains some additional fields: Virtual Address, Virtual IPv6 -Address, Username, Client ID, Peer ID. -Future versions may extend the number of fields. -.br -.B 3 -\-\- identical to 2, but fields are tab\-separated. - -.\"********************************************************* -.TP -.B \-\-mute n -Log at most -.B n -consecutive messages in the same category. This is useful to -limit repetitive logging of similar message types. -.\"********************************************************* -.TP -.B \-\-compress [algorithm] -Enable a compression algorithm. - -The -.B algorithm -parameter may be "lzo", "lz4", or empty. LZO and LZ4 -are different compression algorithms, with LZ4 generally -offering the best performance with least CPU usage. -For backwards compatibility with OpenVPN versions before v2.4, use "lzo" -(which is identical to the older option "\-\-comp\-lzo yes"). - -If the -.B algorithm -parameter is empty, compression will be turned off, but the packet -framing for compression will still be enabled, allowing a different -setting to be pushed later. - -.B Security Considerations - -Compression and encryption is a tricky combination. If an attacker knows or is -able to control (parts of) the plaintext of packets that contain secrets, the -attacker might be able to extract the secret if compression is enabled. See -e.g. the CRIME and BREACH attacks on TLS which also leverage compression to -break encryption. If you are not entirely sure that the above does not apply -to your traffic, you are advised to *not* enable compression. - -.\"********************************************************* -.TP -.B \-\-comp\-lzo [mode] -.B DEPRECATED -This option will be removed in a future OpenVPN release. Use the -newer -.B \-\-compress -instead. - -Use LZO compression \-\- may add up to 1 byte per -packet for incompressible data. -.B mode -may be "yes", "no", or "adaptive" (default). - -In a server mode setup, it is possible to selectively turn -compression on or off for individual clients. - -First, make sure the client\-side config file enables selective -compression by having at least one -.B \-\-comp\-lzo -directive, such as -.B \-\-comp\-lzo no. -This will turn off compression by default, -but allow a future directive push from the server to -dynamically change the -on/off/adaptive setting. - -Next in a -.B \-\-client\-config\-dir -file, specify the compression setting for the client, -for example: - -.nf -.ft 3 -.in +4 -comp\-lzo yes -push "comp\-lzo yes" -.in -4 -.ft -.fi - -The first line sets the -.B comp\-lzo -setting for the server -side of the link, the second sets the client side. -.\"********************************************************* -.TP -.B \-\-comp\-noadapt -When used in conjunction with -.B \-\-comp\-lzo, -this option will disable OpenVPN's adaptive compression algorithm. -Normally, adaptive compression is enabled with -.B \-\-comp\-lzo. - -Adaptive compression tries to optimize the case where you have -compression enabled, but you are sending predominantly incompressible -(or pre\-compressed) packets over the tunnel, such as an FTP or rsync transfer -of a large, compressed file. With adaptive compression, -OpenVPN will periodically sample the compression process to measure its -efficiency. If the data being sent over the tunnel is already compressed, -the compression efficiency will be very low, triggering openvpn to disable -compression for a period of time until the next re\-sample test. -.\"********************************************************* -.TP -.B \-\-management socket\-name unix [pw\-file] \ \ \ \ \ (recommended) -.TQ -.B \-\-management IP port [pw\-file] -Enable a management server on a -.B socket\-name -Unix socket on those platforms supporting it, or on -a designated TCP port. - -.B pw\-file -, if specified, is a password file where the password must be on first line. -Instead of a filename it can use the keyword stdin which will prompt the user -for a password to use when OpenVPN is starting. - -For unix sockets, the default behaviour is to create a unix domain socket -that may be connected to by any process. Use the -.B \-\-management\-client\-user -and -.B \-\-management\-client\-group -directives to restrict access. - -The management interface provides a special mode where the TCP management link -can operate over the tunnel itself. To enable this mode, set IP to -.B tunnel. -Tunnel mode will cause the management interface to listen for a -TCP connection on the local VPN address of the TUN/TAP interface. - -.B BEWARE -of enabling the management interface over TCP. In these cases you should -.I ALWAYS -make use of -.B pw\-file -to password protect the management interface. Any user who can connect to this -TCP -.B IP:port -will be able to manage and control (and interfere with) the OpenVPN process. -It is also strongly recommended to set IP to 127.0.0.1 (localhost) to restrict -accessibility of the management server to local clients. - -While the management port is designed for programmatic control of OpenVPN by -other applications, it is possible to telnet to the port, using a telnet client -in "raw" mode. Once connected, type "help" for a list of commands. - -For detailed documentation on the management interface, see the -.I management\-notes.txt -file in the management folder of the OpenVPN source distribution. - -.TP -.B \-\-management\-client -Management interface will connect as a TCP/unix domain client to -.B IP:port -specified by -.B \-\-management -rather than listen as a TCP server or on a unix domain socket. - -If the client connection fails to connect or is disconnected, -a SIGTERM signal will be generated causing OpenVPN to quit. -.\"********************************************************* -.TP -.B \-\-management\-query\-passwords -Query management channel for private key password and -.B \-\-auth\-user\-pass -username/password. Only query the management channel -for inputs which ordinarily would have been queried from the -console. -.\"********************************************************* -.TP -.B \-\-management\-query\-proxy -Query management channel for proxy server information for a specific -.B \-\-remote -(client\-only). -.\"********************************************************* -.TP -.B \-\-management\-query\-remote -Allow management interface to override -.B \-\-remote -directives (client\-only). -.\"********************************************************* -.TP -.B \-\-management\-external\-key -Allows usage for external private key file instead of -.B \-\-key -option (client\-only). -.\"********************************************************* -.TP -.B \-\-management\-external\-cert certificate\-hint -Allows usage for external certificate instead of -.B \-\-cert -option (client\-only). -.B certificate\-hint -is an arbitrary string which is passed to a management -interface client as an argument of NEED\-CERTIFICATE notification. -Requires \-\-management\-external\-key. -.\"********************************************************* -.TP -.B \-\-management\-forget\-disconnect -Make OpenVPN forget passwords when management session -disconnects. - -This directive does not affect the -.B \-\-http\-proxy -username/password. It is always cached. -.\"********************************************************* -.TP -.B \-\-management\-hold -Start OpenVPN in a hibernating state, until a client -of the management interface explicitly starts it -with the -.B hold release -command. -.\"********************************************************* -.TP -.B \-\-management\-signal -Send SIGUSR1 signal to OpenVPN if management session disconnects. -This is useful when you wish to disconnect an OpenVPN session on -user logoff. For \-\-management\-client this option is not needed since -a disconnect will always generate a SIGTERM. -.\"********************************************************* -.TP -.B \-\-management\-log\-cache n -Cache the most recent -.B n -lines of log file history for usage -by the management channel. -.\"********************************************************* -.TP -.B \-\-management\-up\-down -Report tunnel up/down events to management interface. -.B -.\"********************************************************* -.TP -.B \-\-management\-client\-auth -Gives management interface client the responsibility -to authenticate clients after their client certificate -has been verified. See management\-notes.txt in OpenVPN -distribution for detailed notes. -.\"********************************************************* -.TP -.B \-\-management\-client\-pf -Management interface clients must specify a packet -filter file for each connecting client. See management\-notes.txt -in OpenVPN distribution for detailed notes. -.\"********************************************************* -.TP -.B \-\-management\-client\-user u -When the management interface is listening on a unix domain socket, -only allow connections from user -.B u. -.\"********************************************************* -.TP -.B \-\-management\-client\-group g -When the management interface is listening on a unix domain socket, -only allow connections from group -.B g. -.\"********************************************************* -.TP -.B \-\-plugin module\-pathname [init\-string] -Load plug\-in module from the file -.B module\-pathname, -passing -.B init\-string -as an argument -to the module initialization function. Multiple -plugin modules may be loaded into one OpenVPN -process. - -The -.B module\-pathname -argument can be just a filename or a filename with a relative -or absolute path. The format of the filename and path defines -if the plug\-in will be loaded from a default plug\-in directory -or outside this directory. - -.nf -.ft 3 -.in +4 -.B \-\-plugin path\ \ \ \ \ \ \ \ Effective directory used -==================================================== - myplug.so DEFAULT_DIR/myplug.so - subdir/myplug.so DEFAULT_DIR/subdir/myplug.so - ./subdir/myplug.so CWD/subdir/myplug.so - /usr/lib/my/plug.so /usr/lib/my/plug.so -.in -4 -.fi - -DEFAULT_DIR is replaced by the default plug\-in directory, -which is configured at the build time of OpenVPN. CWD is the -current directory where OpenVPN was started or the directory -OpenVPN have swithed into via the -.B \-\-cd -option before the -.B \-\-plugin -option. - -For more information and examples on how to build OpenVPN -plug\-in modules, see the README file in the -.B plugin -folder of the OpenVPN source distribution. - -If you are using an RPM install of OpenVPN, see -/usr/share/openvpn/plugin. The documentation is -in -.B doc -and the actual plugin modules are in -.B lib. - -Multiple plugin modules can be cascaded, and modules can be -used in tandem with scripts. The modules will be called by -OpenVPN in the order that they are declared in the config -file. If both a plugin and script are configured for the same -callback, the script will be called last. If the -return code of the module/script controls an authentication -function (such as tls\-verify, auth\-user\-pass\-verify, or -client\-connect), then -every module and script must return success (0) in order for -the connection to be authenticated. -.\"********************************************************* -.TP -.B \-\-keying\-material\-exporter label len -Save Exported Keying Material [RFC5705] of len bytes (must be -between 16 and 4095 bytes) using label in environment -(exported_keying_material) for use by plugins in -OPENVPN_PLUGIN_TLS_FINAL callback. - -Note that exporter labels have the potential to collide with existing PRF -labels. In order to prevent this, labels MUST begin with "EXPORTER". - -This option requires OpenSSL 1.0.1 or newer. -.\"********************************************************* -.SS Server Mode -Starting with OpenVPN 2.0, a multi\-client TCP/UDP server mode -is supported, and can be enabled with the -.B \-\-mode server -option. In server mode, OpenVPN will listen on a single -port for incoming client connections. All client -connections will be routed through a single tun or tap -interface. This mode is designed for scalability and should -be able to support hundreds or even thousands of clients -on sufficiently fast hardware. SSL/TLS authentication must -be used in this mode. -.\"********************************************************* -.TP -.B \-\-server network netmask ['nopool'] -A helper directive designed to simplify the configuration -of OpenVPN's server mode. This directive will set up an -OpenVPN server which will allocate addresses to clients -out of the given network/netmask. The server itself -will take the ".1" address of the given network -for use as the server\-side endpoint of the local -TUN/TAP interface. - -For example, -.B \-\-server 10.8.0.0 255.255.255.0 -expands as follows: - -.nf -.ft 3 -.in +4 - mode server - tls\-server - push "topology [topology]" - - if dev tun AND (topology == net30 OR topology == p2p): - ifconfig 10.8.0.1 10.8.0.2 - if !nopool: - ifconfig\-pool 10.8.0.4 10.8.0.251 - route 10.8.0.0 255.255.255.0 - if client\-to\-client: - push "route 10.8.0.0 255.255.255.0" - else if topology == net30: - push "route 10.8.0.1" - - if dev tap OR (dev tun AND topology == subnet): - ifconfig 10.8.0.1 255.255.255.0 - if !nopool: - ifconfig\-pool 10.8.0.2 10.8.0.253 255.255.255.0 - push "route\-gateway 10.8.0.1" - if route\-gateway unset: - route\-gateway 10.8.0.2 - -.in -4 -.ft -.fi - -Don't use -.B \-\-server -if you are ethernet bridging. Use -.B \-\-server\-bridge -instead. -.\"********************************************************* -.TP -.B \-\-server\-bridge gateway netmask pool\-start\-IP pool\-end\-IP -.TP -.B \-\-server\-bridge ['nogw'] - -A helper directive similar to -.B \-\-server -which is designed to simplify the configuration -of OpenVPN's server mode in ethernet bridging configurations. - -If -.B \-\-server\-bridge -is used without any parameters, it will enable a DHCP\-proxy -mode, where connecting OpenVPN clients will receive an IP -address for their TAP adapter from the DHCP server running -on the OpenVPN server\-side LAN. -Note that only clients that support -the binding of a DHCP client with the TAP adapter (such as -Windows) can support this mode. The optional -.B nogw -flag (advanced) indicates that gateway information should not be -pushed to the client. - -To configure ethernet bridging, you -must first use your OS's bridging capability -to bridge the TAP interface with the ethernet -NIC interface. For example, on Linux this is done -with the -.B brctl -tool, and with Windows XP it is done in the Network -Connections Panel by selecting the ethernet and -TAP adapters and right\-clicking on "Bridge Connections". - -Next you you must manually set the -IP/netmask on the bridge interface. The -.B gateway -and -.B netmask -parameters to -.B \-\-server\-bridge -can be set to either the IP/netmask of the -bridge interface, or the IP/netmask of the -default gateway/router on the bridged -subnet. - -Finally, set aside a IP range in the bridged -subnet, -denoted by -.B pool\-start\-IP -and -.B pool\-end\-IP, -for OpenVPN to allocate to connecting -clients. - -For example, -.B server\-bridge 10.8.0.4 255.255.255.0 10.8.0.128 10.8.0.254 -expands as follows: - -.nf -.ft 3 -.in +4 -mode server -tls\-server - -ifconfig\-pool 10.8.0.128 10.8.0.254 255.255.255.0 -push "route\-gateway 10.8.0.4" -.in -4 -.ft -.fi - -In another example, -.B \-\-server\-bridge -(without parameters) expands as follows: - -.nf -.ft 3 -.in +4 -mode server -tls\-server - -push "route\-gateway dhcp" -.in -4 -.ft -.fi - -Or -.B \-\-server\-bridge nogw -expands as follows: - -.nf -.ft 3 -.in +4 -mode server -tls\-server -.in -4 -.ft -.fi -.\"********************************************************* -.TP -.B \-\-push "option" -Push a config file option back to the client for remote -execution. Note that -.B -option -must be enclosed in double quotes (""). The client must specify -.B \-\-pull -in its config file. The set of options which can be -pushed is limited by both feasibility and security. -Some options such as those which would execute scripts -are banned, since they would effectively allow a compromised -server to execute arbitrary code on the client. -Other options such as TLS or MTU parameters -cannot be pushed because the client needs to know -them before the connection to the server can be initiated. - -This is a partial list of options which can currently be pushed: -.B \-\-route, \-\-route\-gateway, \-\-route\-delay, \-\-redirect\-gateway, -.B \-\-ip\-win32, \-\-dhcp\-option, -.B \-\-inactive, \-\-ping, \-\-ping\-exit, \-\-ping\-restart, -.B \-\-setenv, -.B \-\-auth\-token, -.B \-\-persist\-key, \-\-persist\-tun, \-\-echo, -.B \-\-comp\-lzo, -.B \-\-socket\-flags, -.B \-\-sndbuf, \-\-rcvbuf -.\"********************************************************* -.TP -.B \-\-push\-reset -Don't inherit the global push list for a specific client instance. -Specify this option in a client\-specific context such -as with a -.B \-\-client\-config\-dir -configuration file. This option will ignore -.B \-\-push -options at the global config file level. -.\"********************************************************* -.TP -.B \-\-push\-remove opt -selectively remove all -.B \-\-push -options matching "opt" from the option list for a client. "opt" is matched -as a substring against the whole option string to\-be\-pushed to the client, so -.B \-\-push\-remove route -would remove all -.B \-\-push route ... -and -.B \-\-push route\-ipv6 ... -statements, while -.B \-\-push\-remove 'route\-ipv6 2001:' -would only remove IPv6 routes for 2001:... networks. - -.B \-\-push\-remove -can only be used in a client\-specific context, like in a -.B \-\-client\-config\-dir -file, or -.B \-\-client\-connect -script or plugin \-\- similar to -.B \-\-push\-reset, -just more selective. - -NOTE: to -.I change -an option, -.B \-\-push\-remove -can be used to first remove the old value, and then add a new -.B \-\-push -option with the new value. -.\"********************************************************* -.TP -.B \-\-push\-peer\-info -Push additional information about the client to server. -The following data is always pushed to the server: - -IV_VER=<version> \-\- the client OpenVPN version - -IV_PLAT=[linux|solaris|openbsd|mac|netbsd|freebsd|win] \-\- the client OS platform - -IV_LZO_STUB=1 \-\- if client was built with LZO stub capability - -IV_LZ4=1 \-\- if the client supports LZ4 compressions. - -IV_PROTO=2 \-\- if the client supports peer\-id floating mechansim - -IV_NCP=2 \-\- negotiable ciphers, client supports -.B \-\-cipher -pushed by the server, a value of 2 or greater indicates client -supports AES\-GCM\-128 and AES\-GCM\-256. - -IV_GUI_VER=<gui_id> <version> \-\- the UI version of a UI if one is -running, for example "de.blinkt.openvpn 0.5.47" for the -Android app. - -When -.B \-\-push\-peer\-info -is enabled the additional information consists of the following data: - -IV_HWADDR=<mac address> \-\- the MAC address of clients default gateway - -IV_SSL=<version string> \-\- the ssl version used by the client, e.g. "OpenSSL 1.0.2f 28 Jan 2016". - -IV_PLAT_VER=x.y \- the version of the operating system, e.g. 6.1 for Windows 7. - -UV_<name>=<value> \-\- client environment variables whose names start with "UV_" -.\"********************************************************* -.TP -.B \-\-disable -Disable a particular client (based on the common name) -from connecting. Don't use this option to disable a client -due to key or password compromise. Use a CRL (certificate -revocation list) instead (see the -.B \-\-crl\-verify -option). - -This option must be associated with a specific client instance, -which means that it must be specified either in a client -instance config file using -.B \-\-client\-config\-dir -or dynamically generated using a -.B \-\-client\-connect -script. -.\"********************************************************* -.TP -.B \-\-ifconfig\-pool start\-IP end\-IP [netmask] -Set aside a pool of subnets to be -dynamically allocated to connecting clients, similar -to a DHCP server. For tun\-style -tunnels, each client will be given a /30 subnet (for -interoperability with Windows clients). For tap\-style -tunnels, individual addresses will be allocated, and the -optional -.B netmask -parameter will also be pushed to clients. - -.\"********************************************************* -.TP -.B \-\-ifconfig\-pool\-persist file [seconds] -Persist/unpersist ifconfig\-pool -data to -.B file, -at -.B seconds -intervals (default=600), as well as on program startup and -shutdown. - -The goal of this option is to provide a long\-term association -between clients (denoted by their common name) and the virtual -IP address assigned to them from the ifconfig\-pool. -Maintaining a long\-term -association is good for clients because it allows them -to effectively use the -.B \-\-persist\-tun -option. - -.B file -is a comma\-delimited ASCII file, formatted as -<Common\-Name>,<IP\-address>. - -If -.B seconds -= 0, -.B file -will be treated as read\-only. This is useful if -you would like to treat -.B file -as a configuration file. - -Note that the entries in this file are treated by OpenVPN as -suggestions only, based on past associations between -a common name and IP address. They do not guarantee that the given common -name will always receive the given IP address. If you want guaranteed -assignment, use -.B \-\-ifconfig\-push - -.\"********************************************************* -.TP -.B \-\-ifconfig\-pool\-linear -.B DEPRECATED -This option will be removed in OpenVPN 2.5 - -Modifies the -.B \-\-ifconfig\-pool -directive to -allocate individual TUN interface addresses for -clients rather than /30 subnets. NOTE: This option -is incompatible with Windows clients. - -This option is deprecated, and should be replaced with -.B \-\-topology p2p -which is functionally equivalent. -.\"********************************************************* -.TP -.B \-\-ifconfig\-push local remote\-netmask [alias] -Push virtual IP endpoints for client tunnel, -overriding the \-\-ifconfig\-pool dynamic allocation. - -The parameters -.B local -and -.B remote\-netmask -are set according to the -.B \-\-ifconfig -directive which you want to execute on the client machine to -configure the remote end of the tunnel. Note that the parameters -.B local -and -.B remote\-netmask -are from the perspective of the client, not the server. They may be -DNS names rather than IP addresses, in which case they will be resolved -on the server at the time of client connection. - -The optional -.B alias -parameter may be used in cases where NAT causes the client view -of its local endpoint to differ from the server view. In this case -.B local/remote\-netmask -will refer to the server view while -.B alias/remote\-netmask -will refer to the client view. - -This option must be associated with a specific client instance, -which means that it must be specified either in a client -instance config file using -.B \-\-client\-config\-dir -or dynamically generated using a -.B \-\-client\-connect -script. - -Remember also to include a -.B \-\-route -directive in the main OpenVPN config file which encloses -.B local, -so that the kernel will know to route it -to the server's TUN/TAP interface. - -OpenVPN's internal client IP address selection algorithm works as -follows: - -.B 1 -\-\- Use -.B \-\-client\-connect script -generated file for static IP (first choice). -.br -.B 2 -\-\- Use -.B \-\-client\-config\-dir -file for static IP (next choice). -.br -.B 3 -\-\- Use -.B \-\-ifconfig\-pool -allocation for dynamic IP (last choice). -.br -.\"********************************************************* -.TP -.B \-\-iroute network [netmask] -Generate an internal route to a specific -client. The -.B netmask -parameter, if omitted, defaults to 255.255.255.255. - -This directive can be used to route a fixed subnet from -the server to a particular client, regardless -of where the client is connecting from. Remember -that you must also add the route to the system -routing table as well (such as by using the -.B \-\-route -directive). The reason why two routes are needed -is that the -.B \-\-route -directive routes the packet from the kernel -to OpenVPN. Once in OpenVPN, the -.B \-\-iroute -directive routes to the specific client. - -This option must be specified either in a client -instance config file using -.B \-\-client\-config\-dir -or dynamically generated using a -.B \-\-client\-connect -script. - -The -.B \-\-iroute -directive also has an important interaction with -.B \-\-push -"route ...". -.B \-\-iroute -essentially defines a subnet which is owned by a -particular client (we will call this client A). -If you would like other clients to be able to reach A's -subnet, you can use -.B \-\-push -"route ..." -together with -.B \-\-client\-to\-client -to effect this. In order for all clients to see -A's subnet, OpenVPN must push this route to all clients -EXCEPT for A, since the subnet is already owned by A. -OpenVPN accomplishes this by not -not pushing a route to a client -if it matches one of the client's iroutes. -.\"********************************************************* -.TP -.B \-\-client\-to\-client -Because the OpenVPN server mode handles multiple clients -through a single tun or tap interface, it is effectively -a router. The -.B \-\-client\-to\-client -flag tells OpenVPN to internally route client\-to\-client -traffic rather than pushing all client\-originating traffic -to the TUN/TAP interface. - -When this option is used, each client will "see" the other -clients which are currently connected. Otherwise, each -client will only see the server. Don't use this option -if you want to firewall tunnel traffic using -custom, per\-client rules. -.\"********************************************************* -.TP -.B \-\-duplicate\-cn -Allow multiple clients with the same common name to concurrently connect. -In the absence of this option, OpenVPN will disconnect a client instance -upon connection of a new client having the same common name. -.\"********************************************************* -.TP -.B \-\-client\-connect cmd -Run -.B command cmd -on client connection. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -The command is passed the common name -and IP address of the just\-authenticated client -as environmental variables (see environmental variable section -below). The command is also passed -the pathname of a freshly created temporary file as the last argument -(after any arguments specified in -.B cmd -), to be used by the command -to pass dynamically generated config file directives back to OpenVPN. - -If the script wants to generate a dynamic config file -to be applied on the server when the client connects, -it should write it to the file named by the last argument. - -See the -.B \-\-client\-config\-dir -option below for options which -can be legally used in a dynamically generated config file. - -Note that the return value of -.B script -is significant. If -.B script -returns a non\-zero error status, it will cause the client -to be disconnected. -.\"********************************************************* -.TP -.B \-\-client\-disconnect cmd -Like -.B \-\-client\-connect -but called on client instance shutdown. Will not be called -unless the -.B \-\-client\-connect -script and plugins (if defined) -were previously called on this instance with -successful (0) status returns. - -The exception to this rule is if the -.B \-\-client\-disconnect -command or plugins are cascaded, and at least one client\-connect -function succeeded, then ALL of the client\-disconnect functions for -scripts and plugins will be called on client instance object deletion, -even in cases where some of the related client\-connect functions returned -an error status. - -The -.B \-\-client\-disconnect -command is passed the same pathname as the corresponding -.B \-\-client\-connect -command as its last argument. (after any arguments specified in -.B cmd -). -.B -.\"********************************************************* -.TP -.B \-\-client\-config\-dir dir -Specify a directory -.B dir -for custom client config files. After -a connecting client has been authenticated, OpenVPN will -look in this directory for a file having the same name -as the client's X509 common name. If a matching file -exists, it will be opened and parsed for client\-specific -configuration options. If no matching file is found, OpenVPN -will instead try to open and parse a default file called -"DEFAULT", which may be provided but is not required. Note that -the configuration files must be readable by the OpenVPN process -after it has dropped it's root privileges. - -This file can specify a fixed IP address for a given -client using -.B \-\-ifconfig\-push, -as well as fixed subnets owned by the client using -.B \-\-iroute. - -One of the useful properties of this option is that it -allows client configuration files to be conveniently -created, edited, or removed while the server is live, -without needing to restart the server. - -The following -options are legal in a client\-specific context: -.B \-\-push, \-\-push\-reset, \-\-push\-remove, \-\-iroute, \-\-ifconfig\-push, -and -.B \-\-config. -.\"********************************************************* -.TP -.B \-\-ccd\-exclusive -Require, as a -condition of authentication, that a connecting client has a -.B \-\-client\-config\-dir -file. -.\"********************************************************* -.TP -.B \-\-tmp\-dir dir -Specify a directory -.B dir -for temporary files. This directory will be used by -openvpn processes and script to communicate temporary -data with openvpn main process. Note that -the directory must be writable by the OpenVPN process -after it has dropped it's root privileges. - -This directory will be used by in the following cases: - -* -.B \-\-client\-connect -scripts to dynamically generate client\-specific -configuration files. - -* -.B OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY -plugin hook to return success/failure via auth_control_file -when using deferred auth method - -* -.B OPENVPN_PLUGIN_ENABLE_PF -plugin hook to pass filtering rules via pf_file -.\"********************************************************* -.TP -.B \-\-hash\-size r v -Set the size of the real address hash table to -.B r -and the virtual address table to -.B v. -By default, both tables are sized at 256 buckets. -.\"********************************************************* -.TP -.B \-\-bcast\-buffers n -Allocate -.B n -buffers for broadcast datagrams (default=256). -.\"********************************************************* -.TP -.B \-\-tcp\-queue\-limit n -Maximum number of output packets queued before TCP (default=64). - -When OpenVPN is tunneling data from a TUN/TAP device to a -remote client over a TCP connection, it is possible that the TUN/TAP device -might produce data at a faster rate than the TCP connection -can support. When the number of output packets queued before sending to -the TCP socket reaches this limit for a given client connection, -OpenVPN will start to drop outgoing packets directed -at this client. -.\"********************************************************* -.TP -.B \-\-tcp\-nodelay -This macro sets the TCP_NODELAY socket flag on the server -as well as pushes it to connecting clients. The TCP_NODELAY -flag disables the Nagle algorithm on TCP sockets causing -packets to be transmitted immediately with low latency, -rather than waiting a short period of time in order -to aggregate several packets into a larger containing -packet. In VPN applications over TCP, TCP_NODELAY -is generally a good latency optimization. - -The macro expands as follows: - -.nf -.ft 3 -.in +4 - if mode server: - socket\-flags TCP_NODELAY - push "socket\-flags TCP_NODELAY" -.in -4 -.ft -.fi -.\"********************************************************* -.TP -.B \-\-max\-clients n -Limit server to a maximum of -.B n -concurrent clients. -.\"********************************************************* -.TP -.B \-\-max\-routes\-per\-client n -Allow a maximum of -.B n -internal routes per client (default=256). -This is designed to -help contain DoS attacks where an authenticated client floods the -server with packets appearing to come from many unique MAC addresses, -forcing the server to deplete -virtual memory as its internal routing table expands. -This directive can be used in a -.B \-\-client\-config\-dir -file or auto\-generated by a -.B \-\-client\-connect -script to override the global value for a particular client. - -Note that this -directive affects OpenVPN's internal routing table, not the -kernel routing table. -.\"********************************************************* -.TP -.B \-\-stale\-routes\-check n [t] -Remove routes haven't had activity for -.B n -seconds (i.e. the ageing time). - -This check is ran every -.B t -seconds (i.e. check interval). - -If -.B t -is not present it defaults to -.B n - -This option helps to keep the dynamic routing table small. -See also -.B \-\-max\-routes\-per\-client -.\"********************************************************* -.TP -.B \-\-connect\-freq n sec -Allow a maximum of -.B n -new connections per -.B sec -seconds from clients. This is designed to contain DoS attacks which flood -the server with connection requests using certificates which -will ultimately fail to authenticate. - -This is an imperfect solution however, because in a real -DoS scenario, legitimate connections might also be refused. - -For the best protection against DoS attacks in server mode, -use -.B \-\-proto udp -and either -.B \-\-tls\-auth -or -.B \-\-tls\-crypt\fR. -.\"********************************************************* -.TP -.B \-\-learn\-address cmd -Run command -.B cmd -to validate client virtual addresses or routes. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -Three arguments will be appended to any arguments in -.B cmd -as follows: - -.B [1] operation \-\- -"add", "update", or "delete" based on whether or not -the address is being added to, modified, or deleted from -OpenVPN's internal routing table. -.br -.B [2] address \-\- -The address being learned or unlearned. This can be -an IPv4 address such as "198.162.10.14", an IPv4 subnet -such as "198.162.10.0/24", or an ethernet MAC address (when -.B \-\-dev tap -is being used) such as "00:FF:01:02:03:04". -.br -.B [3] common name \-\- -The common name on the certificate associated with the -client linked to this address. Only present for "add" -or "update" operations, not "delete". - -On "add" or "update" methods, if the script returns -a failure code (non\-zero), OpenVPN will reject the address -and will not modify its internal routing table. - -Normally, the -.B cmd -script will use the information provided above to set -appropriate firewall entries on the VPN TUN/TAP interface. -Since OpenVPN provides the association between virtual IP -or MAC address and the client's authenticated common name, -it allows a user\-defined script to configure firewall access -policies with regard to the client's high\-level common name, -rather than the low level client virtual addresses. -.\"********************************************************* -.TP -.B \-\-auth\-user\-pass\-verify cmd method -Require the client to provide a username/password (possibly -in addition to a client certificate) for authentication. - -OpenVPN will run -.B command cmd -to validate the username/password -provided by the client. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -If -.B method -is set to "via\-env", OpenVPN will call -.B script -with the environmental variables -.B username -and -.B password -set to the username/password strings provided by the client. -Be aware that this method is insecure on some platforms which -make the environment of a process publicly visible to other -unprivileged processes. - -If -.B method -is set to "via\-file", OpenVPN will write the username and -password to the first two lines of a temporary file. The filename -will be passed as an argument to -.B script, -and the file will be automatically deleted by OpenVPN after -the script returns. The location of the temporary file is -controlled by the -.B \-\-tmp\-dir -option, and will default to the current directory if unspecified. -For security, consider setting -.B \-\-tmp\-dir -to a volatile storage medium such as -.B /dev/shm -(if available) to prevent the username/password file from touching the hard drive. - -The script should examine the username -and password, -returning a success exit code (0) if the -client's authentication request is to be accepted, or a failure -code (1) to reject the client. - -This directive is designed to enable a plugin\-style interface -for extending OpenVPN's authentication capabilities. - -To protect against a client passing a maliciously formed -username or password string, the username string must -consist only of these characters: alphanumeric, underbar -('_'), dash ('\-'), dot ('.'), or at ('@'). The password -string can consist of any printable characters except for -CR or LF. Any illegal characters in either the username -or password string will be converted to underbar ('_'). - -Care must be taken by any user\-defined scripts to avoid -creating a security vulnerability in the way that these -strings are handled. Never use these strings in such a way -that they might be escaped or evaluated by a shell interpreter. - -For a sample script that performs PAM authentication, see -.B sample\-scripts/auth\-pam.pl -in the OpenVPN source distribution. -.\"********************************************************* -.TP -.B \-\-auth\-gen\-token [lifetime] -After successful user/password authentication, the OpenVPN -server will with this option generate a temporary -authentication token and push that to client. On the following -renegotiations, the OpenVPN client will pass this token instead -of the users password. On the server side the server will do -the token authentication internally and it will NOT do any -additional authentications against configured external -user/password authentication mechanisms. - -The -.B lifetime -argument defines how long the generated token is valid. The -lifetime is defined in seconds. If lifetime is not set -or it is set to 0, the token will never expire. - -This feature is useful for environments which is configured -to use One Time Passwords (OTP) as part of the user/password -authentications and that authentication mechanism does not -implement any auth\-token support. -.\"********************************************************* -.TP -.B \-\-opt\-verify -Clients that connect with options that are incompatible -with those of the server will be disconnected. - -Options that will be compared for compatibility include -dev\-type, link\-mtu, tun\-mtu, proto, ifconfig, -comp\-lzo, fragment, keydir, cipher, auth, keysize, secret, -no\-replay, no\-iv, tls\-auth, key\-method, tls\-server, and tls\-client. - -This option requires that -.B \-\-disable\-occ -NOT be used. -.\"********************************************************* -.TP -.B \-\-auth\-user\-pass\-optional -Allow connections by clients that do not specify a username/password. -Normally, when -.B \-\-auth\-user\-pass\-verify -or -.B \-\-management\-client\-auth -is specified (or an authentication plugin module), the -OpenVPN server daemon will require connecting clients to specify a -username and password. This option makes the submission of a username/password -by clients optional, passing the responsibility to the user\-defined authentication -module/script to accept or deny the client based on other factors -(such as the setting of X509 certificate fields). When this option is used, -and a connecting client does not submit a username/password, the user\-defined -authentication module/script will see the username and password as being set -to empty strings (""). The authentication module/script MUST have logic -to detect this condition and respond accordingly. -.\"********************************************************* -.TP -.B \-\-client\-cert\-not\-required -.B DEPRECATED -This option will be removed in OpenVPN 2.5 - -Don't require client certificate, client will authenticate -using username/password only. Be aware that using this directive -is less secure than requiring certificates from all clients. - -.B Please note: -This is replaced by -.B \-\-verify\-client\-cert -which allows for more flexibility. The option -.B \-\-verify\-client\-cert none -is functionally equivalent to -.B \-\-client\-cert\-not\-required -. - -.\"********************************************************* -.TP -.B \-\-verify\-client\-cert none|optional|require -Specify whether the client is required to supply a valid certificate. - -Possible options are - -.B none -: a client certificate is not required. the client need to authenticate -using username/password only. Be aware that using this directive -is less secure than requiring certificates from all clients. - -If you use this directive, the -entire responsibility of authentication will rest on your -.B \-\-auth\-user\-pass\-verify -script, so keep in mind that bugs in your script -could potentially compromise the security of your VPN. - -.B \-\-verify\-client\-cert none -is functionally equivalent to -.B \-\-client\-cert\-not\-required. - -.B optional -: a client may present a certificate but it is not required to do so. -When using this directive, you should also use a -.B \-\-auth\-user\-pass\-verify -script to ensure that clients are authenticated using a -certificate, a username and password, or possibly even both. - -Again, the entire responsibility of authentication will rest on your -.B \-\-auth\-user\-pass\-verify -script, so keep in mind that bugs in your script -could potentially compromise the security of your VPN. - -.B require -: this is the default option. A client is required to present a -certificate, otherwise VPN access is refused. - -If you don't use this directive (or use -.B \-\-verify\-client\-cert require -) but you also specify an -.B \-\-auth\-user\-pass\-verify -script, then OpenVPN will perform double authentication. The -client certificate verification AND the -.B \-\-auth\-user\-pass\-verify -script will need to succeed in order for a client to be -authenticated and accepted onto the VPN. -.\"********************************************************* -.TP -.B \-\-username\-as\-common\-name -For -.B \-\-auth\-user\-pass\-verify -authentication, use -the authenticated username as the common name, -rather than the common name from the client cert. -.\"********************************************************* -.TP -.B \-\-compat\-names [no\-remapping] -.B DEPRECATED -This option will be removed in OpenVPN 2.5 - -Until OpenVPN v2.3 the format of the X.509 Subject fields was formatted -like this: -.IP -.B -/C=US/L=Somewhere/CN=John Doe/emailAddress=john@example.com -.IP -In addition the old behaviour was to remap any character other than -alphanumeric, underscore ('_'), dash ('\-'), dot ('.'), and slash ('/') to -underscore ('_'). The X.509 Subject string as returned by the -.B tls_id -environmental variable, could additionally contain colon (':') or equal ('='). -.IP -When using the -.B \-\-compat\-names -option, this old formatting and remapping will be re\-enabled again. This is -purely implemented for compatibility reasons when using older plug\-ins or -scripts which does not handle the new formatting or UTF\-8 characters. -.IP -In OpenVPN 2.3 the formatting of these fields changed into a more -standardised format. It now looks like: -.IP -.B -C=US, L=Somewhere, CN=John Doe, emailAddress=john@example.com -.IP -The new default format in OpenVPN 2.3 also does not do the character remapping -which happened earlier. This new format enables proper support for UTF\-8 -characters in the usernames, X.509 Subject fields and Common Name variables and -it complies to the RFC 2253, UTF\-8 String Representation of Distinguished -Names. - -The -.B no\-remapping -mode flag can be used with the -.B -\-\-compat\-names -option to be compatible with the now deprecated \-\-no\-name\-remapping option. -It is only available at the server. When this mode flag is used, the Common Name, -Subject, and username strings are allowed to include any printable character -including space, but excluding control characters such as tab, newline, and -carriage\-return. no\-remapping is only available on the server side. - -.B Please note: -This option is immediately deprecated. It is only implemented -to make the transition to the new formatting less intrusive. It will be -removed in OpenVPN 2.5. So please update your scripts/plug\-ins where necessary. -.\"********************************************************* -.TP -.B \-\-no\-name\-remapping -.B DEPRECATED -This option will be removed in OpenVPN 2.5 - -The -.B \-\-no\-name\-remapping -option is an alias for -.B \-\-compat\-names\ no\-remapping. -It ensures compatibility with server configurations using the -.B \-\-no\-name\-remapping -option. - -.B Please note: -This option is now deprecated. It will be removed in OpenVPN 2.5. -So please make sure you support the new X.509 name formatting -described with the -.B \-\-compat\-names -option as soon as possible. -.\"********************************************************* -.TP -.B \-\-port\-share host port [dir] -When run in TCP server mode, share the OpenVPN port with -another application, such as an HTTPS server. If OpenVPN -senses a connection to its port which is using a non\-OpenVPN -protocol, it will proxy the connection to the server at -.B host:port. -Currently only designed to work with HTTP/HTTPS, -though it would be theoretically possible to extend to -other protocols such as ssh. - -.B dir -specifies an optional directory where a temporary file with name N -containing content C will be dynamically generated for each proxy -connection, where N is the source IP:port of the client connection -and C is the source IP:port of the connection to the proxy -receiver. This directory can be used as a dictionary by -the proxy receiver to determine the origin of the connection. -Each generated file will be automatically deleted when the proxied -connection is torn down. - -Not implemented on Windows. -.\"********************************************************* -.SS Client Mode -Use client mode when connecting to an OpenVPN server -which has -.B \-\-server, \-\-server\-bridge, -or -.B \-\-mode server -in it's configuration. -.\"********************************************************* -.TP -.B \-\-client -A helper directive designed to simplify the configuration -of OpenVPN's client mode. This directive is equivalent to: - -.nf -.ft 3 -.in +4 - pull - tls\-client -.in -4 -.ft -.fi -.\"********************************************************* -.TP -.B \-\-pull -This option must be used on a client which is connecting -to a multi\-client server. It indicates to OpenVPN that it -should accept options pushed by the server, provided they -are part of the legal set of pushable options (note that the -.B \-\-pull -option is implied by -.B \-\-client -). - -In particular, -.B \-\-pull -allows the server to push routes to the client, so you should -not use -.B \-\-pull -or -.B \-\-client -in situations where you don't trust the server to have control -over the client's routing table. -.\"********************************************************* -.TP -.B \-\-pull\-filter accept|ignore|reject \fItext\fR -Filter options received from the server if the option starts with -\fItext\fR. Runs on client. The action flag -.B accept -allows the option, -.B ignore -removes it and -.B reject -flags an error and triggers a SIGUSR1 restart. -The filters may be specified multiple times, and each filter is -applied in the order it is specified. The filtering of each -option stops as soon as a match is found. Unmatched options are accepted -by default. - -Prefix comparison is used to match \fItext\fR against the -received option so that - -.nf -.ft 3 -.in +4 -\-\-pull\-filter ignore "route" -.in -4 -.ft -.fi - -would remove all pushed options starting with -.B route -which would include, for example, -.B route\-gateway. -Enclose \fItext\fR in quotes to embed spaces. - -.nf -.ft 3 -.in +4 -\-\-pull\-filter accept "route 192.168.1." -\-\-pull\-filter ignore "route " -.in -4 -.ft -.fi - -would remove all routes that do not start with 192.168.1. - -This option may be used only on clients. -Note that -.B reject -may result in a repeated cycle of failure and reconnect, -unless multiple remotes are specified and connection to the next remote -succeeds. To silently ignore an option pushed by the server, use -.B ignore. -.\"********************************************************* -.TP -.B \-\-auth\-user\-pass [up] -Authenticate with server using username/password. -.B up -is a file containing username/password on 2 lines. If the -password line is missing, OpenVPN will prompt for one. - -If -.B up -is omitted, username/password will be prompted from the -console. - -The server configuration must specify an -.B \-\-auth\-user\-pass\-verify -script to verify the username/password provided by -the client. -.\"********************************************************* -.TP -.B \-\-auth\-retry type -Controls how OpenVPN responds to username/password verification -errors such as the client\-side response to an AUTH_FAILED message from the server -or verification failure of the private key password. - -Normally used to prevent auth errors from being fatal -on the client side, and to permit username/password requeries in case -of error. - -An AUTH_FAILED message is generated by the server if the client -fails -.B \-\-auth\-user\-pass -authentication, or if the server\-side -.B \-\-client\-connect -script returns an error status when the client -tries to connect. - -.B type -can be one of: - -.B none \-\- -Client will exit with a fatal error (this is the default). -.br -.B nointeract \-\- -Client will retry the connection without requerying for an -.B \-\-auth\-user\-pass -username/password. Use this option for unattended clients. -.br -.B interact \-\- -Client will requery for an -.B \-\-auth\-user\-pass -username/password and/or private key password before attempting a reconnection. - -Note that while this option cannot be pushed, it can be controlled -from the management interface. -.\"********************************************************* -.TP -.B \-\-static\-challenge t e -Enable static challenge/response protocol using challenge text -.B t, -with -echo flag given by -.B e -(0|1). - -The echo flag indicates whether or not the user's response -to the challenge should be echoed. - -See management\-notes.txt in the OpenVPN distribution for a -description of the OpenVPN challenge/response protocol. -.\"********************************************************* -.TP -\fB\-\-server\-poll\-timeout n\fR, \fB\-\-connect\-timeout n\fR -When connecting to a remote server do not wait for more than -.B n -seconds waiting for a response before trying the next server. -The default value is 120s. This timeout includes proxy and TCP -connect timeouts. -.\"********************************************************* -.TP -.B \-\-explicit\-exit\-notify [n] -In UDP client mode or point\-to\-point mode, send server/peer an exit notification -if tunnel is restarted or OpenVPN process is exited. In client mode, on -exit/restart, this -option will tell the server to immediately close its client instance object -rather than waiting for a timeout. The -.B n -parameter (default=1) controls the maximum number of attempts that the client -will try to resend the exit notification message. - -In UDP server mode, send RESTART control channel command to connected clients. The -.B n -parameter (default=1) controls client behavior. With -.B n -= 1 client will attempt to reconnect -to the same server, with -.B n -= 2 client will advance to the next server. - -OpenVPN will not send any exit -notifications unless this option is enabled. -.TP -.B \-\-allow\-recursive\-routing -When this option is set, OpenVPN will not drop incoming tun packets -with same destination as host. -.\"********************************************************* -.SS Data Channel Encryption Options: -These options are meaningful for both Static & TLS\-negotiated key modes -(must be compatible between peers). -.\"********************************************************* -.TP -.B \-\-secret file [direction] -Enable Static Key encryption mode (non\-TLS). -Use pre\-shared secret -.B file -which was generated with -.B \-\-genkey. - -The optional -.B direction -parameter enables the use of 4 distinct keys -(HMAC\-send, cipher\-encrypt, HMAC\-receive, cipher\-decrypt), so that -each data flow direction has a different set of HMAC and cipher keys. -This has a number of desirable security properties including -eliminating certain kinds of DoS and message replay attacks. - -When the -.B direction -parameter is omitted, 2 keys are used bidirectionally, one for HMAC -and the other for encryption/decryption. - -The -.B direction -parameter should always be complementary on either side of the connection, -i.e. one side should use "0" and the other should use "1", or both sides -should omit it altogether. - -The -.B direction -parameter requires that -.B file -contains a 2048 bit key. While pre\-1.5 versions of OpenVPN -generate 1024 bit key files, any version of OpenVPN which -supports the -.B direction -parameter, will also support 2048 bit key file generation -using the -.B \-\-genkey -option. - -Static key encryption mode has certain advantages, -the primary being ease of configuration. - -There are no certificates -or certificate authorities or complicated negotiation handshakes and protocols. -The only requirement is that you have a pre\-existing secure channel with -your peer (such as -.B ssh -) to initially copy the key. This requirement, along with the -fact that your key never changes unless you manually generate a new one, -makes it somewhat less secure than TLS mode (see below). If an attacker -manages to steal your key, everything that was ever encrypted with -it is compromised. Contrast that to the perfect forward secrecy features of -TLS mode (using Diffie Hellman key exchange), where even if an attacker -was able to steal your private key, he would gain no information to help -him decrypt past sessions. - -Another advantageous aspect of Static Key encryption mode is that -it is a handshake\-free protocol -without any distinguishing signature or feature -(such as a header or protocol handshake sequence) -that would mark the ciphertext packets as being -generated by OpenVPN. Anyone eavesdropping on the wire -would see nothing -but random\-looking data. -.\"********************************************************* -.TP -.B \-\-key\-direction -Alternative way of specifying the optional direction parameter for the -.B \-\-tls\-auth -and -.B \-\-secret -options. Useful when using inline files (See section on inline files). -.\"********************************************************* -.TP -.B \-\-auth alg -Authenticate data channel packets and (if enabled) -.B tls\-auth -control channel packets with HMAC using message digest algorithm -.B alg. -(The default is -.B SHA1 -). -HMAC is a commonly used message authentication algorithm (MAC) that uses -a data string, a secure hash algorithm, and a key, to produce -a digital signature. - -The OpenVPN data channel protocol uses encrypt\-then\-mac (i.e. first encrypt a -packet, then HMAC the resulting ciphertext), which prevents padding oracle -attacks. - -If an AEAD cipher mode (e.g. GCM) is chosen, the specified -.B \-\-auth -algorithm is ignored for the data channel, and the authentication method of the -AEAD cipher is used instead. Note that -.B alg -still specifies the digest used for -.B tls\-auth\fR. - -In static\-key encryption mode, the HMAC key -is included in the key file generated by -.B \-\-genkey. -In TLS mode, the HMAC key is dynamically generated and shared -between peers via the TLS control channel. If OpenVPN receives a packet with -a bad HMAC it will drop the packet. -HMAC usually adds 16 or 20 bytes per packet. -Set -.B alg=none -to disable authentication. - -For more information on HMAC see -.I http://www.cs.ucsd.edu/users/mihir/papers/hmac.html -.\"********************************************************* -.TP -.B \-\-cipher alg -Encrypt data channel packets with cipher algorithm -.B alg. - -The default is -.B BF\-CBC, -an abbreviation for Blowfish in Cipher Block Chaining mode. When cipher -negotiation (NCP) is allowed, OpenVPN 2.4 and newer on both client and server -side will automatically upgrade to -.B AES\-256\-GCM. -See -.B \-\-ncp\-ciphers -and -.B \-\-ncp\-disable -for more details on NCP. - -Using -.B BF\-CBC -is no longer recommended, because of its 64\-bit block size. This -small block size allows attacks based on collisions, as demonstrated by SWEET32. -See https://community.openvpn.net/openvpn/wiki/SWEET32 for details. Due to -this, support for -.B BF\-CBC, DES, CAST5, IDEA -and -.B RC2 -ciphers will be removed in OpenVPN 2.6. - -To see other ciphers that are available with OpenVPN, use the -.B \-\-show\-ciphers -option. - -Set -.B alg=none -to disable encryption. - -.\"********************************************************* -.TP -.B \-\-ncp\-ciphers cipher_list -Restrict the allowed ciphers to be negotiated to the ciphers in -.B cipher_list\fR. -.B cipher_list -is a colon\-separated list of ciphers, and defaults to -"AES\-256\-GCM:AES\-128\-GCM". - -For servers, the first cipher from -.B cipher_list -will be pushed to clients that support cipher negotiation. - -Cipher negotiation is enabled in client\-server mode only. I.e. if -.B \-\-mode -is set to 'server' (server\-side, implied by setting -.B \-\-server -), or if -.B \-\-pull -is specified (client\-side, implied by setting \-\-client). - -If both peers support and do not disable NCP, the negotiated cipher will -override the cipher specified by -.B \-\-cipher\fR. - -Additionally, to allow for more smooth transition, if NCP is enabled, OpenVPN -will inherit the cipher of the peer if that cipher is different from the local -.B \-\-cipher -setting, but the peer cipher is one of the ciphers specified in -.B \-\-ncp\-ciphers\fR. -E.g. a non\-NCP client (<=v2.3, or with \-\-ncp\-disabled set) connecting to a -NCP server (v2.4+) with "\-\-cipher BF\-CBC" and "\-\-ncp\-ciphers -AES\-256\-GCM:AES\-256\-CBC" set can either specify "\-\-cipher BF\-CBC" or -"\-\-cipher AES\-256\-CBC" and both will work. - -.\"********************************************************* -.TP -.B \-\-ncp\-disable -Disable "negotiable crypto parameters". This completely disables cipher -negotiation. -.\"********************************************************* -.TP -.B \-\-keysize n -.B DEPRECATED -This option will be removed in OpenVPN 2.6. - -Size of cipher key in bits (optional). -If unspecified, defaults to cipher\-specific default. The -.B \-\-show\-ciphers -option (see below) shows all available OpenSSL ciphers, -their default key sizes, and whether the key size can -be changed. Use care in changing a cipher's default -key size. Many ciphers have not been extensively -cryptanalyzed with non\-standard key lengths, and a -larger key may offer no real guarantee of greater -security, or may even reduce security. -.\"********************************************************* -.TP -.B \-\-prng alg [nsl] -(Advanced) For PRNG (Pseudo\-random number generator), -use digest algorithm -.B alg -(default=sha1), and set -.B nsl -(default=16) -to the size in bytes of the nonce secret length (between 16 and 64). - -Set -.B alg=none -to disable the PRNG and use the OpenSSL RAND_bytes function -instead for all of OpenVPN's pseudo\-random number needs. -.\"********************************************************* -.TP -.B \-\-engine [engine\-name] -Enable OpenSSL hardware\-based crypto engine functionality. - -If -.B engine\-name -is specified, -use a specific crypto engine. Use the -.B \-\-show\-engines -standalone option to list the crypto engines which are -supported by OpenSSL. -.\"********************************************************* -.TP -.B \-\-no\-replay -.B DEPRECATED -This option will be removed in OpenVPN 2.5. - -(Advanced) Disable OpenVPN's protection against replay attacks. -Don't use this option unless you are prepared to make -a tradeoff of greater efficiency in exchange for less -security. - -OpenVPN provides datagram replay protection by default. - -Replay protection is accomplished -by tagging each outgoing datagram with an identifier -that is guaranteed to be unique for the key being used. -The peer that receives the datagram will check for -the uniqueness of the identifier. If the identifier -was already received in a previous datagram, OpenVPN -will drop the packet. Replay protection is important -to defeat attacks such as a SYN flood attack, where -the attacker listens in the wire, intercepts a TCP -SYN packet (identifying it by the context in which -it occurs in relation to other packets), then floods -the receiving peer with copies of this packet. - -OpenVPN's replay protection is implemented in slightly -different ways, depending on the key management mode -you have selected. - -In Static Key mode -or when using an CFB or OFB mode cipher, OpenVPN uses a -64 bit unique identifier that combines a time stamp with -an incrementing sequence number. - -When using TLS mode for key exchange and a CBC cipher -mode, OpenVPN uses only a 32 bit sequence number without -a time stamp, since OpenVPN can guarantee the uniqueness -of this value for each key. As in IPSec, if the sequence number is -close to wrapping back to zero, OpenVPN will trigger -a new key exchange. - -To check for replays, OpenVPN uses -the -.I sliding window -algorithm used -by IPSec. -.\"********************************************************* -.TP -.B \-\-replay\-window n [t] -Use a replay protection sliding\-window of size -.B n -and a time window of -.B t -seconds. - -By default -.B n -is 64 (the IPSec default) and -.B t -is 15 seconds. - -This option is only relevant in UDP mode, i.e. -when either -.B \-\-proto udp -is specified, or no -.B \-\-proto -option is specified. - -When OpenVPN tunnels IP packets over UDP, there is the possibility that -packets might be dropped or delivered out of order. Because OpenVPN, like IPSec, -is emulating the physical network layer, -it will accept an out\-of\-order packet sequence, and -will deliver such packets in the same order they were received to -the TCP/IP protocol stack, provided they satisfy several constraints. - -.B (a) -The packet cannot be a replay (unless -.B \-\-no\-replay -is specified, which disables replay protection altogether). - -.B (b) -If a packet arrives out of order, it will only be accepted if the difference -between its sequence number and the highest sequence number received -so far is less than -.B n. - -.B (c) -If a packet arrives out of order, it will only be accepted if it arrives no later -than -.B t -seconds after any packet containing a higher sequence number. - -If you are using a network link with a large pipeline (meaning that -the product of bandwidth and latency is high), you may want to use -a larger value for -.B n. -Satellite links in particular often require this. - -If you run OpenVPN at -.B \-\-verb 4, -you will see the message "Replay\-window backtrack occurred [x]" -every time the maximum sequence number backtrack seen thus far -increases. This can be used to calibrate -.B n. - -There is some controversy on the appropriate method of handling packet -reordering at the security layer. - -Namely, to what extent should the -security layer protect the encapsulated protocol from attacks which masquerade -as the kinds of normal packet loss and reordering that occur over IP networks? - -The IPSec and OpenVPN approach is to allow packet reordering within a certain -fixed sequence number window. - -OpenVPN adds to the IPSec model by limiting the window size in time as well as -sequence space. - -OpenVPN also adds TCP transport as an option (not offered by IPSec) in which -case OpenVPN can adopt a very strict attitude towards message deletion and -reordering: Don't allow it. Since TCP guarantees reliability, any packet -loss or reordering event can be assumed to be an attack. - -In this sense, it could be argued that TCP tunnel transport is preferred when -tunneling non\-IP or UDP application protocols which might be vulnerable to a -message deletion or reordering attack which falls within the normal -operational parameters of IP networks. - -So I would make the statement that one should never tunnel a non\-IP protocol -or UDP application protocol over UDP, if the protocol might be vulnerable to a -message deletion or reordering attack that falls within the normal operating -parameters of what is to be expected from the physical IP layer. The problem -is easily fixed by simply using TCP as the VPN transport layer. -.\"********************************************************* -.TP -.B \-\-mute\-replay\-warnings -Silence the output of replay warnings, which are a common -false alarm on WiFi networks. This option preserves -the security of the replay protection code without -the verbosity associated with warnings about duplicate -packets. -.\"********************************************************* -.TP -.B \-\-replay\-persist file -Persist replay\-protection state across sessions using -.B file -to save and reload the state. - -This option will strengthen protection against replay attacks, -especially when you are using OpenVPN in a dynamic context (such -as with -.B \-\-inetd) -when OpenVPN sessions are frequently started and stopped. - -This option will keep a disk copy of the current replay protection -state (i.e. the most recent packet timestamp and sequence number -received from the remote peer), so that if an OpenVPN session -is stopped and restarted, it will reject any replays of packets -which were already received by the prior session. - -This option only makes sense when replay protection is enabled -(the default) and you are using either -.B \-\-secret -(shared\-secret key mode) or TLS mode with -.B \-\-tls\-auth. -.\"********************************************************* -.TP -.B \-\-no\-iv -.B DEPRECATED -This option will be removed in OpenVPN 2.5. - -(Advanced) Disable OpenVPN's use of IV (cipher initialization vector). -Don't use this option unless you are prepared to make -a tradeoff of greater efficiency in exchange for less -security. - -OpenVPN uses an IV by default, and requires it for CFB and -OFB cipher modes (which are totally insecure without it). -Using an IV is important for security when multiple -messages are being encrypted/decrypted with the same key. - -IV is implemented differently depending on the cipher mode used. - -In CBC mode, OpenVPN uses a pseudo\-random IV for each packet. - -In CFB/OFB mode, OpenVPN uses a unique sequence number and time stamp -as the IV. In fact, in CFB/OFB mode, OpenVPN uses a datagram -space\-saving optimization that uses the unique identifier for -datagram replay protection as the IV. -.\"********************************************************* -.TP -.B \-\-use\-prediction\-resistance -Enable prediction resistance on mbed TLS's RNG. - -Enabling prediction resistance causes the RNG to reseed in each -call for random. Reseeding this often can quickly deplete the kernel -entropy pool. - -If you need this option, please consider running a daemon that adds -entropy to the kernel pool. - -.\"********************************************************* -.TP -.B \-\-test\-crypto -Do a self\-test of OpenVPN's crypto options by encrypting and -decrypting test packets using the data channel encryption options -specified above. This option does not require a peer to function, -and therefore can be specified without -.B \-\-dev -or -.B \-\-remote. - -The typical usage of -.B \-\-test\-crypto -would be something like this: - -.B openvpn \-\-test\-crypto \-\-secret key - -or - -.B openvpn \-\-test\-crypto \-\-secret key \-\-verb 9 - -This option is very useful to test OpenVPN after it has been ported to -a new platform, or to isolate problems in the compiler, OpenSSL -crypto library, or OpenVPN's crypto code. Since it is a self\-test mode, -problems with encryption and authentication can be debugged independently -of network and tunnel issues. -.\"********************************************************* -.SS TLS Mode Options: -TLS mode is the most powerful crypto mode of OpenVPN in both security and flexibility. -TLS mode works by establishing control and -data channels which are multiplexed over a single TCP/UDP port. OpenVPN initiates -a TLS session over the control channel and uses it to exchange cipher -and HMAC keys to protect the data channel. TLS mode uses a robust reliability -layer over the UDP connection for all control channel communication, while -the data channel, over which encrypted tunnel data passes, is forwarded without -any mediation. The result is the best of both worlds: a fast data channel -that forwards over UDP with only the overhead of encrypt, -decrypt, and HMAC functions, -and a control channel that provides all of the security features of TLS, -including certificate\-based authentication and Diffie Hellman forward secrecy. - -To use TLS mode, each peer that runs OpenVPN should have its own local -certificate/key pair ( -.B \-\-cert -and -.B \-\-key -), signed by the root certificate which is specified -in -.B \-\-ca. - -When two OpenVPN peers connect, each presents its local certificate to the -other. Each peer will then check that its partner peer presented a -certificate which was signed by the master root certificate as specified in -.B \-\-ca. - -If that check on both peers succeeds, then the TLS negotiation -will succeed, both OpenVPN -peers will exchange temporary session keys, and the tunnel will begin -passing data. - -The OpenVPN project provides a set of scripts for -managing RSA certificates & keys: -.I https://github.com/OpenVPN/easy\-rsa -.\"********************************************************* -.TP -.B \-\-tls\-server -Enable TLS and assume server role during TLS handshake. Note that -OpenVPN is designed as a peer\-to\-peer application. The designation -of client or server is only for the purpose of negotiating the TLS -control channel. -.\"********************************************************* -.TP -.B \-\-tls\-client -Enable TLS and assume client role during TLS handshake. -.\"********************************************************* -.TP -.B \-\-ca file -Certificate authority (CA) file in .pem format, also referred to as the -.I root -certificate. This file can have multiple -certificates in .pem format, concatenated together. You can construct your own -certificate authority certificate and private key by using a command such as: - -.B openssl req \-nodes \-new \-x509 \-keyout ca.key \-out ca.crt - -Then edit your openssl.cnf file and edit the -.B certificate -variable to point to your new root certificate -.B ca.crt. - -For testing purposes only, the OpenVPN distribution includes a sample -CA certificate (ca.crt). -Of course you should never use -the test certificates and test keys distributed with OpenVPN in a -production environment, since by virtue of the fact that -they are distributed with OpenVPN, they are totally insecure. -.\"********************************************************* -.TP -.B \-\-capath dir -Directory containing trusted certificates (CAs and CRLs). -Not available with mbed TLS. - -CAs in the capath directory are expected to be named <hash>.<n>. CRLs are -expected to be named <hash>.r<n>. See the -.B \-CApath -option of -.B openssl verify -, and the -.B \-hash -option of -.B openssl x509 -, -.B openssl crl -and -.BR X509_LOOKUP_hash_dir (3) -for more information. - -Similarly to the -.B \-\-crl\-verify -option CRLs are not mandatory \- OpenVPN will log the usual warning in the logs -if the relevant CRL is missing, but the connection will be allowed. -.\"********************************************************* -.TP -.B \-\-dh file -File containing Diffie Hellman parameters -in .pem format (required for -.B \-\-tls\-server -only). - -Set -.B file=none -to disable Diffie Hellman key exchange (and use ECDH only). Note that this -requires peers to be using an SSL library that supports ECDH TLS cipher suites -(e.g. OpenSSL 1.0.1+, or mbed TLS 2.0+). - -Use -.B openssl dhparam \-out dh2048.pem 2048 -to generate 2048\-bit DH parameters. Diffie Hellman parameters may be considered -public. -.\"********************************************************* -.TP -.B \-\-ecdh\-curve name -Specify the curve to use for elliptic curve Diffie Hellman. Available -curves can be listed with -.BR \-\-show\-curves . -The specified curve will only be used for ECDH TLS\-ciphers. - -This option is not supported in mbed TLS builds of OpenVPN. -.\"********************************************************* -.TP -.B \-\-cert file -Local peer's signed certificate in .pem format \-\- must be signed -by a certificate authority whose certificate is in -.B \-\-ca file. -Each peer in an OpenVPN link running in TLS mode should have its own -certificate and private key file. In addition, each certificate should -have been signed by the key of a certificate -authority whose public key resides in the -.B \-\-ca -certificate authority file. -You can easily make your own certificate authority (see above) or pay money -to use a commercial service such as thawte.com (in which case you will be -helping to finance the world's second space tourist :). -To generate a certificate, -you can use a command such as: - -.B openssl req \-nodes \-new \-keyout mycert.key \-out mycert.csr - -If your certificate authority private key lives on another machine, copy -the certificate signing request (mycert.csr) to this other machine (this can -be done over an insecure channel such as email). Now sign the certificate -with a command such as: - -.B openssl ca \-out mycert.crt \-in mycert.csr - -Now copy the certificate (mycert.crt) -back to the peer which initially generated the .csr file (this -can be over a public medium). -Note that the -.B openssl ca -command reads the location of the certificate authority key from its -configuration file such as -.B /usr/share/ssl/openssl.cnf -\-\- note also -that for certificate authority functions, you must set up the files -.B index.txt -(may be empty) and -.B serial -(initialize to -.B -01 -). -.\"********************************************************* -.TP -.B \-\-extra\-certs file -Specify a -.B file -containing one or more PEM certs (concatenated together) -that complete the -local certificate chain. - -This option is useful for "split" CAs, where the CA for server -certs is different than the CA for client certs. Putting certs -in this file allows them to be used to complete the local -certificate chain without trusting them to verify the peer\-submitted -certificate, as would be the case if the certs were placed in the -.B ca -file. -.\"********************************************************* -.TP -.B \-\-key file -Local peer's private key in .pem format. Use the private key which was generated -when you built your peer's certificate (see -.B \-\-cert file -above). -.\"********************************************************* -.TP -.B \-\-tls\-version\-min version ['or\-highest'] -Sets the minimum -TLS version we will accept from the peer (default is "1.0"). -Examples for version -include "1.0", "1.1", or "1.2". If 'or\-highest' is specified -and version is not recognized, we will only accept the highest TLS -version supported by the local SSL implementation. -.\"********************************************************* -.TP -.B \-\-tls\-version\-max version -Set the maximum TLS version we will use (default is the highest version -supported). Examples for version include "1.0", "1.1", or "1.2". -.\"********************************************************* -.TP -.B \-\-pkcs12 file -Specify a PKCS #12 file containing local private key, -local certificate, and root CA certificate. -This option can be used instead of -.B \-\-ca, \-\-cert, -and -.B \-\-key. -Not available with mbed TLS. -.\"********************************************************* -.TP -.B \-\-verify\-hash hash [algo] -Specify SHA1 or SHA256 fingerprint for level\-1 cert. The level\-1 cert is the -CA (or intermediate cert) that signs the leaf certificate, and is -one removed from the leaf certificate in the direction of the root. -When accepting a connection from a peer, the level\-1 cert -fingerprint must match -.B hash -or certificate verification will fail. Hash is specified -as XX:XX:... For example: - -.nf -.ft 3 -.in +4 -AD:B0:95:D8:09:C8:36:45:12:A9:89:C8:90:09:CB:13:72:A6:AD:16 -.in -4 -.ft -.fi - -The -.B algo -flag can be either SHA1 or SHA256. If not provided, it defaults to SHA1. -.\"********************************************************* -.TP -.B \-\-pkcs11\-cert\-private [0|1]... -Set if access to certificate object should be performed after login. -Every provider has its own setting. -.\"********************************************************* -.TP -.B \-\-pkcs11\-id name -Specify the serialized certificate id to be used. The id can be gotten -by the standalone -.B \-\-show\-pkcs11\-ids -option. -.\"********************************************************* -.TP -.B \-\-pkcs11\-id\-management -Acquire PKCS#11 id from management interface. In this case a NEED\-STR 'pkcs11\-id\-request' -real\-time message will be triggered, application may use pkcs11\-id\-count command to -retrieve available number of certificates, and pkcs11\-id\-get command to retrieve certificate -id and certificate body. -.\"********************************************************* -.TP -.B \-\-pkcs11\-pin\-cache seconds -Specify how many seconds the PIN can be cached, the default is until the token is removed. -.\"********************************************************* -.TP -.B \-\-pkcs11\-protected\-authentication [0|1]... -Use PKCS#11 protected authentication path, useful for biometric and external -keypad devices. -Every provider has its own setting. -.\"********************************************************* -.TP -.B \-\-pkcs11\-providers provider... -Specify a RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) providers -to load. -This option can be used instead of -.B \-\-cert, \-\-key, -and -.B \-\-pkcs12. - -If p11\-kit is present on the system, its -.B p11\-kit\-proxy.so -module will be loaded by default if either the -.B \-\-pkcs11\-id -or -.B \-\-pkcs11\-id\-management -options are specified without -.B \-\-pkcs11\-provider -being given. -.\"********************************************************* -.TP -.B \-\-pkcs11\-private\-mode mode... -Specify which method to use in order to perform private key operations. -A different mode can be specified for each provider. -Mode is encoded as hex number, and can be a mask one of the following: - -.B 0 -(default) \-\- Try to determine automatically. -.br -.B 1 -\-\- Use sign. -.br -.B 2 -\-\- Use sign recover. -.br -.B 4 -\-\- Use decrypt. -.br -.B 8 -\-\- Use unwrap. -.br -.\"********************************************************* -.TP -.B \-\-cryptoapicert select\-string -Load the certificate and private key from the -Windows Certificate System Store (Windows/OpenSSL Only). - -Use this option instead of -.B \-\-cert -and -.B \-\-key. - -This makes -it possible to use any smart card, supported by Windows, but also any -kind of certificate, residing in the Cert Store, where you have access to -the private key. This option has been tested with a couple of different -smart cards (GemSAFE, Cryptoflex, and Swedish Post Office eID) on the -client side, and also an imported PKCS12 software certificate on the -server side. - -To select a certificate, based on a substring search in the -certificate's subject: - -.B cryptoapicert -"SUBJ:Peter Runestig" - -To select a certificate, based on certificate's thumbprint: - -.B cryptoapicert -"THUMB:f6 49 24 41 01 b4 ..." - -The thumbprint hex string can easily be copy\-and\-pasted from the Windows -Certificate Store GUI. - -.\"********************************************************* -.TP -.B \-\-key\-method m -.B DEPRECATED -This option will be removed in OpenVPN 2.5 - -Use data channel key negotiation method -.B m. -The key method must match on both sides of the connection. - -After OpenVPN negotiates a TLS session, a new set of keys -for protecting the tunnel data channel is generated and -exchanged over the TLS session. - -In method 1 (the default for OpenVPN 1.x), both sides generate -random encrypt and HMAC\-send keys which are forwarded to -the other host over the TLS channel. Method 1 is -.B deprecated in OpenVPN 2.4 -, and -.B will be removed in OpenVPN 2.5\fR. - -In method 2, (the default for OpenVPN 2.0) -the client generates a random key. Both client -and server also generate some random seed material. All key source -material is exchanged over the TLS channel. The actual -keys are generated using the TLS PRF function, taking source -entropy from both client and server. Method 2 is designed to -closely parallel the key generation process used by TLS 1.0. - -Note that in TLS mode, two separate levels -of keying occur: - -(1) The TLS connection is initially negotiated, with both sides -of the connection producing certificates and verifying the certificate -(or other authentication info provided) of -the other side. The -.B \-\-key\-method -parameter has no effect on this process. - -(2) After the TLS connection is established, the tunnel session keys are -separately negotiated over the existing secure TLS channel. Here, -.B \-\-key\-method -determines the derivation of the tunnel session keys. -.\"********************************************************* -.TP -.B \-\-tls\-cipher l -.TQ -.B \-\-tls\-ciphersuites l -A list -.B l -of allowable TLS ciphers delimited by a colon (":"). - -These setting can be used to ensure that certain cipher suites are used (or -not used) for the TLS connection. OpenVPN uses TLS to secure the control -channel, over which the keys that are used to protect the actual VPN traffic -are exchanged. - -The supplied list of ciphers is (after potential OpenSSL/IANA name translation) -simply supplied to the crypto library. Please see the OpenSSL and/or mbed TLS -documentation for details on the cipher list interpretation. - -For OpenSSL, the -.B \-\-tls-cipher -is used for TLS 1.2 and below. For TLS 1.3 and up, the -.B \-\-tls\-ciphersuites -setting is used. mbed TLS has no TLS 1.3 support yet and only the -.B \-\-tls-cipher -setting is used. - -Use -.B \-\-show\-tls -to see a list of TLS ciphers supported by your crypto library. - -Warning! -.B \-\-tls\-cipher -and -.B \-\-tls\-ciphersuites -are expert features, which \- if used correcly \- can improve the security of -your VPN connection. But it is also easy to unwittingly use them to carefully -align a gun with your foot, or just break your connection. Use with care! - -The default for \-\-tls\-cipher is to use mbed TLS's default cipher list -when using mbed TLS or -"DEFAULT:!EXP:!LOW:!MEDIUM:!kDH:!kECDH:!DSS:!PSK:!SRP:!kRSA" when using -OpenSSL. - -The default for \-\-tls\-ciphersuites is to use the crypto library's default. -.\"********************************************************* -.TP -.B \-\-tls\-cert\-profile profile -Set the allowed cryptographic algorithms for certificates according to -.B profile\fN. - -The following profiles are supported: - -.B legacy -(default): SHA1 and newer, RSA 2048-bit+, any elliptic curve. - -.B preferred -: SHA2 and newer, RSA 2048-bit+, any elliptic curve. - -.B suiteb -: SHA256/SHA384, ECDSA with P-256 or P-384. - -This option is only fully supported for mbed TLS builds. OpenSSL builds use -the following approximation: - -.B legacy -(default): sets "security level 1" - -.B preferred -: sets "security level 2" - -.B suiteb -: sets "security level 3" and \-\-tls\-cipher "SUITEB128". - -OpenVPN will migrate to 'preferred' as default in the future. Please ensure -that your keys already comply. -.\"********************************************************* -.TP -.B \-\-tls\-timeout n -Packet retransmit timeout on TLS control channel -if no acknowledgment from remote within -.B n -seconds (default=2). When OpenVPN sends a control -packet to its peer, it will expect to receive an -acknowledgement within -.B n -seconds or it will retransmit the packet, subject -to a TCP\-like exponential backoff algorithm. This parameter -only applies to control channel packets. Data channel -packets (which carry encrypted tunnel data) are never -acknowledged, sequenced, or retransmitted by OpenVPN because -the higher level network protocols running on top of the tunnel -such as TCP expect this role to be left to them. -.\"********************************************************* -.TP -.B \-\-reneg\-bytes n -Renegotiate data channel key after -.B n -bytes sent or received (disabled by default with an exception, see below). -OpenVPN allows the lifetime of a key -to be expressed as a number of bytes encrypted/decrypted, a number of packets, -or a number of seconds. A key renegotiation will be forced -if any of these three criteria are met by either peer. - -If using ciphers with cipher block sizes less than 128\-bits, \-\-reneg\-bytes is -set to 64MB by default, unless it is explicitly disabled by setting the value to -0, but this is -.B HIGHLY DISCOURAGED -as this is designed to add some protection against the SWEET32 attack vector. -For more information see the \-\-cipher option. -.\"********************************************************* -.TP -.B \-\-reneg\-pkts n -Renegotiate data channel key after -.B n -packets sent and received (disabled by default). -.\"********************************************************* -.TP -.B \-\-reneg\-sec n -Renegotiate data channel key after -.B n -seconds (default=3600). - -When using dual\-factor authentication, note that this default value may -cause the end user to be challenged to reauthorize once per hour. - -Also, keep in mind that this option can be used on both the client and server, -and whichever uses the lower value will be the one to trigger the renegotiation. -A common mistake is to set -.B \-\-reneg\-sec -to a higher value on either the client or server, while the other side of the connection -is still using the default value of 3600 seconds, meaning that the renegotiation will -still occur once per 3600 seconds. The solution is to increase \-\-reneg\-sec on both the -client and server, or set it to 0 on one side of the connection (to disable), and to -your chosen value on the other side. -.\"********************************************************* -.TP -.B \-\-hand\-window n -Handshake Window \-\- the TLS\-based key exchange must finalize within -.B n -seconds -of handshake initiation by any peer (default = 60 seconds). -If the handshake fails -we will attempt to reset our connection with our peer and try again. -Even in the event of handshake failure we will still use -our expiring key for up to -.B \-\-tran\-window -seconds to maintain continuity of transmission of tunnel -data. -.\"********************************************************* -.TP -.B \-\-tran\-window n -Transition window \-\- our old key can live this many seconds -after a new a key renegotiation begins (default = 3600 seconds). -This feature allows for a graceful transition from old to new -key, and removes the key renegotiation sequence from the critical -path of tunnel data forwarding. -.\"********************************************************* -.TP -.B \-\-single\-session -After initially connecting to a remote peer, disallow any new connections. -Using this -option means that a remote peer cannot connect, disconnect, and then -reconnect. - -If the daemon is reset by a signal or -.B \-\-ping\-restart, -it will allow one new connection. - -.B \-\-single\-session -can be used with -.B \-\-ping\-exit -or -.B \-\-inactive -to create a single dynamic session that will exit when finished. -.\"********************************************************* -.TP -.B \-\-tls\-exit -Exit on TLS negotiation failure. -.\"********************************************************* -.TP -.B \-\-tls\-auth file [direction] -Add an additional layer of HMAC authentication on top of the TLS control channel -to mitigate DoS attacks and attacks on the TLS stack. - -In a nutshell, -.B \-\-tls\-auth -enables a kind of "HMAC firewall" on OpenVPN's TCP/UDP port, -where TLS control channel packets -bearing an incorrect HMAC signature can be dropped immediately without -response. - -.B file -(required) is a file in OpenVPN static key format which can be generated by -.B \-\-genkey - -Older versions (up to OpenVPN 2.3) supported a freeform passphrase file. -This is no longer supported in newer versions (v2.4+). - -See the -.B \-\-secret -option for more information on the optional -.B direction -parameter. - -.B \-\-tls\-auth -is recommended when you are running OpenVPN in a mode where -it is listening for packets from any IP address, such as when -.B \-\-remote -is not specified, or -.B \-\-remote -is specified with -.B \-\-float. - -The rationale for -this feature is as follows. TLS requires a multi\-packet exchange -before it is able to authenticate a peer. During this time -before authentication, OpenVPN is allocating resources (memory -and CPU) to this potential peer. The potential peer is also -exposing many parts of OpenVPN and the OpenSSL library to the packets -it is sending. Most successful network attacks today seek -to either exploit bugs in programs (such as buffer overflow attacks) or -force a program to consume so many resources that it becomes unusable. -Of course the first line of defense is always to produce clean, -well\-audited code. OpenVPN has been written with buffer overflow -attack prevention as a top priority. -But as history has shown, many of the most widely used -network applications have, from time to time, -fallen to buffer overflow attacks. - -So as a second line of defense, OpenVPN offers -this special layer of authentication on top of the TLS control channel so that -every packet on the control channel is authenticated by an -HMAC signature and a unique ID for replay protection. -This signature will also help protect against DoS (Denial of Service) attacks. -An important rule of thumb in reducing vulnerability to DoS attacks is to -minimize the amount of resources a potential, but as yet unauthenticated, -client is able to consume. - -.B \-\-tls\-auth -does this by signing every TLS control channel packet with an HMAC signature, -including packets which are sent before the TLS level has had a chance -to authenticate the peer. -The result is that packets without -the correct signature can be dropped immediately upon reception, -before they have a chance to consume additional system resources -such as by initiating a TLS handshake. -.B \-\-tls\-auth -can be strengthened by adding the -.B \-\-replay\-persist -option which will keep OpenVPN's replay protection state -in a file so that it is not lost across restarts. - -It should be emphasized that this feature is optional and that the -key file used with -.B \-\-tls\-auth -gives a peer nothing more than the power to initiate a TLS -handshake. It is not used to encrypt or authenticate any tunnel data. - -Use -.B \-\-tls\-crypt -instead if you want to use the key file to not only authenticate, but also -encrypt the TLS control channel. -.\"********************************************************* -.TP -.B \-\-tls\-crypt keyfile - -Encrypt and authenticate all control channel packets with the key from -.B keyfile. -(See -.B \-\-tls\-auth -for more background.) - -Encrypting (and authenticating) control channel packets: -.RS -.IP \[bu] 2 -provides more privacy by hiding the certificate used for the TLS connection, -.IP \[bu] -makes it harder to identify OpenVPN traffic as such, -.IP \[bu] -provides "poor\-man's" post\-quantum security, against attackers who will never -know the pre\-shared key (i.e. no forward secrecy). -.RE - -.IP -In contrast to -.B \-\-tls\-auth\fR, -.B \-\-tls\-crypt -does *not* require the user to set -.B \-\-key\-direction\fR. - -.B Security Considerations - -All peers use the same -.B \-\-tls\-crypt -pre\-shared group key to authenticate and encrypt control channel messages. To -ensure that IV collisions remain unlikely, this key should not be used to -encrypt more than 2^48 client\-to\-server or 2^48 server\-to\-client control -channel messages. A typical initial negotiation is about 10 packets in each -direction. Assuming both initial negotiation and renegotiations are at most -2^16 (65536) packets (to be conservative), and (re)negotiations happen each -minute for each user (24/7), this limits the tls\-crypt key lifetime to 8171 -years divided by the number of users. So a setup with 1000 users should rotate -the key at least once each eight years. (And a setup with 8000 users each -year.) - -If IV collisions were to occur, this could result in the security of -.B \-\-tls\-crypt -degrading to the same security as using -.B \-\-tls\-auth\fR. -That is, the control channel still benefits from the extra protection against -active man\-in\-the\-middle\-attacks and DoS attacks, but may no longer offer -extra privacy and post\-quantum security on top of what TLS itself offers. -.\"********************************************************* -.TP -.B \-\-askpass [file] -Get certificate password from console or -.B file -before we daemonize. - -For the extremely -security conscious, it is possible to protect your private key with -a password. Of course this means that every time the OpenVPN -daemon is started you must be there to type the password. The -.B \-\-askpass -option allows you to start OpenVPN from the command line. It will -query you for a password before it daemonizes. To protect a private -key with a password you should omit the -.B \-nodes -option when you use the -.B openssl -command line tool to manage certificates and private keys. - -If -.B file -is specified, read the password from the first line of -.B file. -Keep in mind that storing your password in a file -to a certain extent invalidates the extra security provided by -using an encrypted key. -.\"********************************************************* -.TP -.B \-\-auth\-nocache -Don't cache -.B \-\-askpass -or -.B \-\-auth\-user\-pass -username/passwords in virtual memory. - -If specified, this directive will cause OpenVPN to immediately -forget username/password inputs after they are used. As a result, -when OpenVPN needs a username/password, it will prompt for input -from stdin, which may be multiple times during the duration of an -OpenVPN session. - -When using \-\-auth\-nocache in combination with a user/password file -and \-\-chroot or \-\-daemon, make sure to use an absolute path. - -This directive does not affect the -.B \-\-http\-proxy -username/password. It is always cached. -.\"********************************************************* -.TP -.B \-\-auth\-token token -This is not an option to be used directly in any configuration files, -but rather push this option from a -.B \-\-client\-connect -script or a -.B \-\-plugin -which hooks into the OPENVPN_PLUGIN_CLIENT_CONNECT or -OPENVPN_PLUGIN_CLIENT_CONNECT_V2 calls. This option provides -a possibility to replace the clients password with an authentication -token during the lifetime of the OpenVPN client. - -Whenever the connection is renegotiated and the -.B \-\-auth\-user\-pass\-verify -script or -.B \-\-plugin -making use of the OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY hook is -triggered, it will pass over this token as the password -instead of the password the user provided. The authentication -token can only be reset by a full reconnect where the server -can push new options to the client. The password the user entered -is never preserved once an authentication token have been set. If -the OpenVPN server side rejects the authentication token, the -client will receive an AUTH_FAIL and disconnect. - -The purpose of this is to enable two factor authentication -methods, such as HOTP or TOTP, to be used without needing to -retrieve a new OTP code each time the connection is renegotiated. -Another use case is to cache authentication data on the client -without needing to have the users password cached in memory -during the life time of the session. - -To make use of this feature, the -.B \-\-client\-connect -script or -.B \-\-plugin -needs to put - -.nf -.ft 3 -.in +4 -push "auth\-token UNIQUE_TOKEN_VALUE" -.in -4 -.ft -.fi - -into the file/buffer for dynamic configuration data. This -will then make the OpenVPN server to push this value to the -client, which replaces the local password with the -UNIQUE_TOKEN_VALUE. - -Newer clients (2.4.7+) will fall back to the original password method -after a failed auth. Older clients will keep using the token value -and react acording to -.B \-\-auth-retry -. -.\"********************************************************* -.TP -.B \-\-tls\-verify cmd -Run command -.B cmd -to verify the X509 name of a -pending TLS connection that has otherwise passed all other -tests of certification (except for revocation via -.B \-\-crl\-verify -directive; the revocation test occurs after the -.B \-\-tls\-verify -test). - -.B cmd -should return 0 to allow the TLS handshake to proceed, or 1 to fail. - -.B cmd -consists of a path to script (or executable program), optionally -followed by arguments. The path and arguments may be single\- or double\-quoted -and/or escaped using a backslash, and should be separated by one or more spaces. - -When -.B cmd -is executed two arguments are appended after any arguments specified in -.B cmd -, as follows: - -.B cmd certificate_depth subject - -These arguments are, respectively, the current certificate depth and -the X509 subject distinguished name (dn) of the peer. - -This feature is useful if the peer you want to trust has a certificate -which was signed by a certificate authority who also signed many -other certificates, where you don't necessarily want to trust all of them, -but rather be selective about which -peer certificate you will accept. This feature allows you to write a script -which will test the X509 name on a certificate and decide whether or -not it should be accepted. For a simple perl script which will test -the common name field on the certificate, see the file -.B verify\-cn -in the OpenVPN distribution. - -See the "Environmental Variables" section below for -additional parameters passed as environmental variables. -.\"********************************************************* -.TP -.B \-\-tls\-export\-cert directory -Store the certificates the clients uses upon connection to this -directory. This will be done before \-\-tls\-verify is called. The -certificates will use a temporary name and will be deleted when -the tls\-verify script returns. The file name used for the certificate -is available via the peer_cert environment variable. -.\"********************************************************* -.TP -.B \-\-x509\-username\-field [ext:\]fieldname -Field in the X.509 certificate subject to be used as the username (default=CN). -Typically, this option is specified with -.B fieldname -as either of the following: - -.B \-\-x509\-username\-field -emailAddress -.br -.B \-\-x509\-username\-field ext:\fRsubjectAltName - -The first example uses the value of the "emailAddress" attribute in the -certificate's Subject field as the username. The second example uses -the -.B ext: -prefix to signify that the X.509 extension -.B fieldname -"subjectAltName" be searched for an rfc822Name (email) field to be used -as the username. In cases where there are multiple email addresses -in -.B ext:fieldname\fR, -the last occurrence is chosen. - -When this option is used, the -.B \-\-verify\-x509\-name -option will match against the chosen -.B fieldname -instead of the Common Name. - -Only the subjectAltName and issuerAltName X.509 extensions are supported. - -.B Please note: -This option has a feature which will convert an all\-lowercase -.B fieldname -to uppercase characters, e.g., ou \-> OU. A mixed\-case -.B fieldname -or one having the -.B ext: -prefix will be left as\-is. This automatic upcasing feature -is deprecated and will be removed in a future release. -.\"********************************************************* -.TP -.B \-\-verify\-x509\-name name type -Accept connections only if a host's X.509 name is equal to -.B name. -The remote host must also pass all other tests of verification. - -Which X.509 name is compared to -.B name -depends on the setting of type. -.B type -can be "subject" to match the complete subject DN (default), -"name" to match a subject RDN or "name\-prefix" to match a subject RDN prefix. -Which RDN is verified as name depends on the -.B \-\-x509\-username\-field -option. But it defaults to the common name (CN), e.g. a certificate with a -subject DN "C=KG, ST=NA, L=Bishkek, CN=Server\-1" would be matched by: - -.B \-\-verify\-x509\-name 'C=KG, ST=NA, L=Bishkek, CN=Server\-1' -and -.B \-\-verify\-x509\-name Server\-1 name -or you could use -.B \-\-verify\-x509\-name Server\- name\-prefix -if you want a client to only accept connections to "Server\-1", "Server\-2", etc. - -.B \-\-verify\-x509\-name -is a useful replacement for the -.B \-\-tls\-verify -option to verify the remote host, because -.B \-\-verify\-x509\-name -works in a -.B \-\-chroot -environment without any dependencies. - -Using a name prefix is a useful alternative to managing -a CRL (Certificate Revocation List) on the client, since it allows the client -to refuse all certificates except for those associated -with designated servers. - -.B NOTE: -Test against a name prefix only when you are using OpenVPN with -a custom CA certificate that is under your control. -Never use this option with type "name\-prefix" when your client certificates -are signed by a third party, such as a commercial web CA. -.\"********************************************************* -.TP -.B \-\-x509\-track attribute -Save peer X509 -.B attribute -value in environment for use by plugins and management interface. -Prepend a '+' to -.B attribute -to save values from full cert chain. Values will be encoded -as X509_<depth>_<attribute>=<value>. Multiple -.B \-\-x509\-track -options can be defined to track multiple attributes. -.\"********************************************************* -.TP -.B \-\-ns\-cert\-type client|server -.B DEPRECATED -This option will be removed in OpenVPN 2.5. Use the more modern equivalent -.B \-\-remote\-cert\-tls -instead. This option will be removed in OpenVPN 2.5. - -Require that peer certificate was signed with an explicit -.B nsCertType -designation of "client" or "server". - -This is a useful security option for clients, to ensure that -the host they connect with is a designated server. - -See the easy\-rsa/build\-key\-server script for an example -of how to generate a certificate with the -.B nsCertType -field set to "server". - -If the server certificate's nsCertType field is set -to "server", then the clients can verify this with -.B \-\-ns\-cert\-type server. - -This is an important security precaution to protect against -a man\-in\-the\-middle attack where an authorized client -attempts to connect to another client by impersonating the server. -The attack is easily prevented by having clients verify -the server certificate using any one of -.B \-\-ns\-cert\-type, \-\-verify\-x509\-name, -or -.B \-\-tls\-verify. -.\"********************************************************* -.TP -.B \-\-remote\-cert\-ku [v...] -Require that peer certificate was signed with an explicit -.B key usage. - -If present in the certificate, the keyUsage value is validated by the TLS -library during the TLS handshake. Specifying this option without arguments -requires this extension to be present (so the TLS library will verify it). - -If the list -.B v... -is also supplied, the keyUsage field must have -.B at least -the same bits set as the bits in -.B one of -the values supplied in the list -.B v... - -The key usage values in the list must be encoded in hex, e.g. -"\-\-remote\-cert\-ku a0" -.\"********************************************************* -.TP -.B \-\-remote\-cert\-eku oid -Require that peer certificate was signed with an explicit -.B extended key usage. - -This is a useful security option for clients, to ensure that -the host they connect to is a designated server. - -The extended key usage should be encoded in oid notation, or -OpenSSL symbolic representation. -.\"********************************************************* -.TP -.B \-\-remote\-cert\-tls client|server -Require that peer certificate was signed with an explicit -.B key usage -and -.B extended key usage -based on RFC3280 TLS rules. - -This is a useful security option for clients, to ensure that the host they -connect to is a designated server. Or the other way around; for a server to -verify that only hosts with a client certificate can connect. - -The -.B \-\-remote\-cert\-tls client -option is equivalent to -.B -\-\-remote\-cert\-ku \-\-remote\-cert\-eku "TLS Web Client Authentication" - -The -.B \-\-remote\-cert\-tls server -option is equivalent to -.B -\-\-remote\-cert\-ku \-\-remote\-cert\-eku "TLS Web Server Authentication" - -This is an important security precaution to protect against -a man\-in\-the\-middle attack where an authorized client -attempts to connect to another client by impersonating the server. -The attack is easily prevented by having clients verify -the server certificate using any one of -.B \-\-remote\-cert\-tls, \-\-verify\-x509\-name, -or -.B \-\-tls\-verify. -.\"********************************************************* -.TP -.B \-\-crl\-verify crl ['dir'] -Check peer certificate against the file -.B crl -in PEM format. - -A CRL (certificate revocation list) is used when a particular key is -compromised but when the overall PKI is still intact. - -Suppose you had a PKI consisting of a CA, root certificate, and a number of -client certificates. Suppose a laptop computer containing a client key and -certificate was stolen. By adding the stolen certificate to the CRL file, -you could reject any connection which attempts to use it, while preserving the -overall integrity of the PKI. - -The only time when it would be necessary to rebuild the entire PKI from scratch would be -if the root certificate key itself was compromised. - -The option is not mandatory \- if the relevant CRL is missing, OpenVPN will log -a warning in the logs \- e.g. "\fIVERIFY WARNING: depth=0, unable to get -certificate CRL\fR" \- but the connection will be allowed. - -If the optional -.B dir -flag is specified, enable a different mode where -.B crl -is a directory containing files named as revoked serial numbers -(the files may be empty, the contents are never read). If a client -requests a connection, where the client certificate serial number -(decimal string) is the name of a file present in the directory, -it will be rejected. - -Note: As the crl file (or directory) is read every time a peer connects, -if you are dropping root privileges with -.B \-\-user, -make sure that this user has sufficient privileges to read the file. -.\"********************************************************* -.SS SSL Library information: -.\"********************************************************* -.TP -.B \-\-show\-ciphers -(Standalone) -Show all cipher algorithms to use with the -.B \-\-cipher -option. -.\"********************************************************* -.TP -.B \-\-show\-digests -(Standalone) -Show all message digest algorithms to use with the -.B \-\-auth -option. -.\"********************************************************* -.TP -.B \-\-show\-tls -(Standalone) -Show all TLS ciphers supported by the crypto library. OpenVPN uses TLS to -secure the control channel, over which the keys that are used to protect the -actual VPN traffic are exchanged. The TLS ciphers will be sorted from highest -preference (most secure) to lowest. - -Be aware that whether a cipher suite in this list can actually work depends on -the specific setup of both peers (e.g. both peers must support the cipher, and -an ECDSA cipher suite will not work if you are using an RSA certificate, etc.). -.\"********************************************************* -.TP -.B \-\-show\-engines -(Standalone) -Show currently available hardware\-based crypto acceleration -engines supported by the OpenSSL library. -.\"********************************************************* -.TP -.B \-\-show\-curves -(Standalone) -Show all available elliptic curves to use with the -.B \-\-ecdh\-curve -option. -.\"********************************************************* -.SS Generate a random key: -Used only for non\-TLS static key encryption mode. -.\"********************************************************* -.TP -.B \-\-genkey -(Standalone) -Generate a random key to be used as a shared secret, -for use with the -.B \-\-secret -option. This file must be shared with the -peer over a pre\-existing secure channel such as -.BR scp (1) -. -.\"********************************************************* -.TP -.B \-\-secret file -Write key to -.B file. -.\"********************************************************* -.SS TUN/TAP persistent tunnel config mode: -Available with Linux 2.4.7+. These options comprise a standalone mode -of OpenVPN which can be used to create and delete persistent tunnels. -.\"********************************************************* -.TP -.B \-\-mktun -(Standalone) -Create a persistent tunnel on platforms which support them such -as Linux. Normally TUN/TAP tunnels exist only for -the period of time that an application has them open. This option -takes advantage of the TUN/TAP driver's ability to build persistent -tunnels that live through multiple instantiations of OpenVPN and die -only when they are deleted or the machine is rebooted. - -One of the advantages of persistent tunnels is that they eliminate the -need for separate -.B \-\-up -and -.B \-\-down -scripts to run the appropriate -.BR ifconfig (8) -and -.BR route (8) -commands. These commands can be placed in the the same shell script -which starts or terminates an OpenVPN session. - -Another advantage is that open connections through the TUN/TAP\-based tunnel -will not be reset if the OpenVPN peer restarts. This can be useful to -provide uninterrupted connectivity through the tunnel in the event of a DHCP -reset of the peer's public IP address (see the -.B \-\-ipchange -option above). - -One disadvantage of persistent tunnels is that it is harder to automatically -configure their MTU value (see -.B \-\-link\-mtu -and -.B \-\-tun\-mtu -above). - -On some platforms such as Windows, TAP\-Win32 tunnels are persistent by -default. -.\"********************************************************* -.TP -.B \-\-rmtun -(Standalone) -Remove a persistent tunnel. -.\"********************************************************* -.TP -.B \-\-dev tunX | tapX -TUN/TAP device -.\"********************************************************* -.TP -.B \-\-user user -Optional user to be owner of this tunnel. -.\"********************************************************* -.TP -.B \-\-group group -Optional group to be owner of this tunnel. -.\"********************************************************* -.SS Windows\-Specific Options: -.\"********************************************************* -.TP -.B \-\-win\-sys path -Set the Windows system directory pathname to use when looking for system -executables such as -.B route.exe -and -.B netsh.exe. -By default, if this directive is -not specified, OpenVPN will use the SystemRoot environment variable. - -This option have changed behaviour in OpenVPN 2.3. Earlier you had to -define -.B \-\-win\-sys env -to use the SystemRoot environment variable, otherwise it defaulted to C:\\WINDOWS. -It is not needed to use the -.B env -keyword any more, and it will just be ignored. A warning is logged when this -is found in the configuration file. -.\"********************************************************* -.TP -.B \-\-ip\-win32 method -When using -.B \-\-ifconfig -on Windows, set the TAP\-Win32 adapter -IP address and netmask using -.B method. -Don't use this option unless you are also using -.B \-\-ifconfig. - -.B manual \-\- -Don't set the IP address or netmask automatically. -Instead output a message -to the console telling the user to configure the -adapter manually and indicating the IP/netmask which -OpenVPN expects the adapter to be set to. - -.B dynamic [offset] [lease\-time] \-\- -Automatically set the IP address and netmask by replying to -DHCP query messages generated by the kernel. This mode is -probably the "cleanest" solution -for setting the TCP/IP properties since it uses the well\-known -DHCP protocol. There are, however, two prerequisites for using -this mode: (1) The TCP/IP properties for the TAP\-Win32 -adapter must be set to "Obtain an IP address automatically," and -(2) OpenVPN needs to claim an IP address in the subnet for use -as the virtual DHCP server address. By default in -.B \-\-dev tap -mode, OpenVPN will -take the normally unused first address in the subnet. For example, -if your subnet is 192.168.4.0 netmask 255.255.255.0, then -OpenVPN will take the IP address 192.168.4.0 to use as the -virtual DHCP server address. In -.B \-\-dev tun -mode, OpenVPN will cause the DHCP server to masquerade as if it were -coming from the remote endpoint. The optional offset parameter is -an integer which is > \-256 and < 256 and which defaults to \-1. -If offset is positive, the DHCP server will masquerade as the IP -address at network address + offset. -If offset is negative, the DHCP server will masquerade as the IP -address at broadcast address + offset. The Windows -.B ipconfig /all -command can be used to show what Windows thinks the DHCP server -address is. OpenVPN will "claim" this address, so make sure to -use a free address. Having said that, different OpenVPN instantiations, -including different ends of the same connection, can share the same -virtual DHCP server address. The -.B lease\-time -parameter controls the lease time of the DHCP assignment given to -the TAP\-Win32 adapter, and is denoted in seconds. -Normally a very long lease time is preferred -because it prevents routes involving the TAP\-Win32 adapter from -being lost when the system goes to sleep. The default -lease time is one year. - -.B netsh \-\- -Automatically set the IP address and netmask using -the Windows command\-line "netsh" -command. This method appears to work correctly on -Windows XP but not Windows 2000. - -.B ipapi \-\- -Automatically set the IP address and netmask using the -Windows IP Helper API. This approach -does not have ideal semantics, though testing has indicated -that it works okay in practice. If you use this option, -it is best to leave the TCP/IP properties for the TAP\-Win32 -adapter in their default state, i.e. "Obtain an IP address -automatically." - -.B adaptive \-\- -(Default) Try -.B dynamic -method initially and fail over to -.B netsh -if the DHCP negotiation with the TAP\-Win32 adapter does -not succeed in 20 seconds. Such failures have been known -to occur when certain third\-party firewall packages installed -on the client machine block the DHCP negotiation used by -the TAP\-Win32 adapter. -Note that if the -.B netsh -failover occurs, the TAP\-Win32 adapter -TCP/IP properties will be reset from DHCP to static, and this -will cause future OpenVPN startups using the -.B adaptive -mode to use -.B netsh -immediately, rather than trying -.B dynamic -first. To "unstick" the -.B adaptive -mode from using -.B netsh, -run OpenVPN at least once using the -.B dynamic -mode to restore the TAP\-Win32 adapter TCP/IP properties -to a DHCP configuration. -.\"********************************************************* -.TP -.B \-\-route\-method m -Which method -.B m -to use for adding routes on Windows? - -.B adaptive -(default) \-\- Try IP helper API first. If that fails, fall -back to the route.exe shell command. -.br -.B ipapi -\-\- Use IP helper API. -.br -.B exe -\-\- Call the route.exe shell command. -.\"********************************************************* -.TP -.B \-\-dhcp\-option type [parm] -Set extended TAP\-Win32 TCP/IP properties, must -be used with -.B \-\-ip\-win32 dynamic -or -.B \-\-ip\-win32 adaptive. -This option can be used to set additional TCP/IP properties -on the TAP\-Win32 adapter, and is particularly useful for -configuring an OpenVPN client to access a Samba server -across the VPN. - -.B DOMAIN name \-\- -Set Connection\-specific DNS Suffix. - -.B DNS addr \-\- -Set primary domain name server IPv4 or IPv6 address. Repeat -this option to set secondary DNS server addresses. - -Note: DNS IPv6 servers are currently set using netsh (the existing -DHCP code can only do IPv4 DHCP, and that protocol only permits IPv4 -addresses anywhere). The option will be put into the environment, so -an -.B \-\-up -script could act upon it if needed. - -.B WINS addr \-\- -Set primary WINS server address (NetBIOS over TCP/IP Name Server). -Repeat this option to set secondary WINS server addresses. - -.B NBDD addr \-\- -Set primary NBDD server address (NetBIOS over TCP/IP Datagram Distribution Server) -Repeat this option -to set secondary NBDD server addresses. - -.B NTP addr \-\- -Set primary NTP server address (Network Time Protocol). -Repeat this option -to set secondary NTP server addresses. - -.B NBT type \-\- -Set NetBIOS over TCP/IP Node type. Possible options: -.B 1 -= b\-node (broadcasts), -.B 2 -= p\-node (point\-to\-point -name queries to a WINS server), -.B 4 -= m\-node (broadcast -then query name server), and -.B 8 -= h\-node (query name server, then broadcast). - -.B NBS scope\-id \-\- -Set NetBIOS over TCP/IP Scope. A NetBIOS Scope ID provides an extended -naming service for the NetBIOS over TCP/IP (Known as NBT) module. The -primary purpose of a NetBIOS scope ID is to isolate NetBIOS traffic on -a single network to only those nodes with the same NetBIOS scope ID. -The NetBIOS scope ID is a character string that is appended to the NetBIOS -name. The NetBIOS scope ID on two hosts must match, or the two hosts -will not be able to communicate. The NetBIOS Scope ID also allows -computers to use the same computer name, as they have different -scope IDs. The Scope ID becomes a part of the NetBIOS name, making the name unique. -(This description of NetBIOS scopes courtesy of NeonSurge@abyss.com) - -.B DISABLE\-NBT \-\- -Disable Netbios\-over\-TCP/IP. - -Note that if -.B \-\-dhcp\-option -is pushed via -.B \-\-push -to a non\-windows client, the option will be saved in the client's -environment before the up script is called, under -the name "foreign_option_{n}". -.\"********************************************************* -.TP -.B \-\-tap\-sleep n -Cause OpenVPN to sleep for -.B n -seconds immediately after the TAP\-Win32 adapter state -is set to "connected". - -This option is intended to be used to troubleshoot problems -with the -.B \-\-ifconfig -and -.B \-\-ip\-win32 -options, and is used to give -the TAP\-Win32 adapter time to come up before -Windows IP Helper API operations are applied to it. -.\"********************************************************* -.TP -.B \-\-show\-net\-up -Output OpenVPN's view of the system routing table and network -adapter list to the syslog or log file after the TUN/TAP adapter -has been brought up and any routes have been added. -.\"********************************************************* -.TP -.B \-\-block\-outside\-dns -Block DNS servers on other network adapters to prevent -DNS leaks. This option prevents any application from accessing -TCP or UDP port 53 except one inside the tunnel. It uses -Windows Filtering Platform (WFP) and works on Windows Vista or -later. - -This option is considered unknown on non\-Windows platforms -and unsupported on Windows XP, resulting in fatal error. -You may want to use -.B \-\-setenv opt -or -.B \-\-ignore\-unknown\-option -(not suitable for Windows XP) to ignore said error. -Note that pushing unknown options from server does not trigger -fatal errors. -.\"********************************************************* -.TP -.B \-\-dhcp\-renew -Ask Windows to renew the TAP adapter lease on startup. -This option is normally unnecessary, as Windows automatically -triggers a DHCP renegotiation on the TAP adapter when it -comes up, however if you set the TAP\-Win32 adapter -Media Status property to "Always Connected", you may need this -flag. -.\"********************************************************* -.TP -.B \-\-dhcp\-release -Ask Windows to release the TAP adapter lease on shutdown. -This option has no effect now, as it is enabled by default starting with OpenVPN 2.4.1. -.\"********************************************************* -.TP -.B \-\-register\-dns -Run ipconfig /flushdns and ipconfig /registerdns on connection initiation. -This is known to kick Windows into -recognizing pushed DNS servers. -.\"********************************************************* -.TP -.B \-\-pause\-exit -Put up a "press any key to continue" message on the console prior -to OpenVPN program exit. This option is automatically used by the -Windows explorer when OpenVPN is run on a configuration -file using the right\-click explorer menu. -.\"********************************************************* -.TP -.B \-\-service exit\-event [0|1] -Should be used when OpenVPN is being automatically executed by another -program in such -a context that no interaction with the user via display or keyboard -is possible. In general, end\-users should never need to explicitly -use this option, as it is automatically added by the OpenVPN service wrapper -when a given OpenVPN configuration is being run as a service. - -.B exit\-event -is the name of a Windows global event object, and OpenVPN will continuously -monitor the state of this event object and exit when it becomes signaled. - -The second parameter indicates the initial state of -.B exit\-event -and normally defaults to 0. - -Multiple OpenVPN processes can be simultaneously executed with the same -.B exit\-event -parameter. In any case, the controlling process can signal -.B exit\-event, -causing all such OpenVPN processes to exit. - -When executing an OpenVPN process using the -.B \-\-service -directive, OpenVPN will probably not have a console -window to output status/error -messages, therefore it is useful to use -.B \-\-log -or -.B \-\-log\-append -to write these messages to a file. -.\"********************************************************* -.TP -.B \-\-show\-adapters -(Standalone) -Show available TAP\-Win32 adapters which can be selected using the -.B \-\-dev\-node -option. On non\-Windows systems, the -.BR ifconfig (8) -command provides similar functionality. -.\"********************************************************* -.TP -.B \-\-allow\-nonadmin [TAP\-adapter] -(Standalone) -Set -.B TAP\-adapter -to allow access from non\-administrative accounts. If -.B TAP\-adapter -is omitted, all TAP adapters on the system will be configured to allow -non\-admin access. -The non\-admin access setting will only persist for the length of time that -the TAP\-Win32 device object and driver remain loaded, and will need -to be re\-enabled after a reboot, or if the driver is unloaded -and reloaded. -This directive can only be used by an administrator. -.\"********************************************************* -.TP -.B \-\-show\-valid\-subnets -(Standalone) -Show valid subnets for -.B \-\-dev tun -emulation. Since the TAP\-Win32 driver -exports an ethernet interface to Windows, and since TUN devices are -point\-to\-point in nature, it is necessary for the TAP\-Win32 driver -to impose certain constraints on TUN endpoint address selection. - -Namely, the point\-to\-point endpoints used in TUN device emulation -must be the middle two addresses of a /30 subnet (netmask 255.255.255.252). -.\"********************************************************* -.TP -.B \-\-show\-net -(Standalone) -Show OpenVPN's view of the system routing table and network -adapter list. -.\"********************************************************* -.SS PKCS#11 Standalone Options: -.\"********************************************************* -.TP -.B \-\-show\-pkcs11\-ids [provider] [cert_private] -(Standalone) -Show PKCS#11 token object list. Specify cert_private as 1 -if certificates are stored as private objects. - -If p11\-kit is present on the system, the -.B provider -argument is optional; if omitted the default -.B p11\-kit\-proxy.so -module will be queried. - -.B \-\-verb -option can be used BEFORE this option to produce debugging information. -.\"********************************************************* -.SS Standalone Debug Options: -.\"********************************************************* -.TP -.B \-\-show\-gateway [v6target] -(Standalone) -Show current IPv4 and IPv6 default gateway and interface towards the -gateway (if the protocol in question is enabled). If an IPv6 address -is passed as argument, the IPv6 route for this host is reported. -.\"********************************************************* -.SS IPv6 Related Options -.\"********************************************************* -The following options exist to support IPv6 tunneling in peer\-to\-peer -and client\-server mode. All options are modeled after their IPv4 -counterparts, so more detailed explanations given there apply here -as well (except for -.B \-\-topology -, which has no effect on IPv6). -.TP -.B \-\-ifconfig\-ipv6 ipv6addr/bits ipv6remote -configure IPv6 address -.B ipv6addr/bits -on the ``tun'' device. The second parameter is used as route target for -.B \-\-route\-ipv6 -if no gateway is specified. -.TP -.B \-\-route\-ipv6 ipv6addr/bits [gateway] [metric] -setup IPv6 routing in the system to send the specified IPv6 network -into OpenVPN's ``tun''. The gateway parameter is only used for -IPv6 routes across ``tap'' devices, and if missing, the ``ipv6remote'' -field from -.B \-\-ifconfig\-ipv6 -is used. -.TP -.B \-\-server\-ipv6 ipv6addr/bits -convenience\-function to enable a number of IPv6 related options at -once, namely -.B \-\-ifconfig\-ipv6, \-\-ifconfig\-ipv6\-pool -and -.B \-\-push tun\-ipv6 -Is only accepted if ``\-\-mode server'' or ``\-\-server'' is set. Pushing of the -.B \-\-tun\-ipv6 -directive is done for older clients which require an explicit -``\-\-tun\-ipv6'' in their configuration. -.TP -.B \-\-ifconfig\-ipv6\-pool ipv6addr/bits -Specify an IPv6 address pool for dynamic assignment to clients. The -pool starts at -.B ipv6addr -and matches the offset determined from the start of the IPv4 pool. -.TP -.B \-\-ifconfig\-ipv6\-push ipv6addr/bits ipv6remote -for ccd/ per\-client static IPv6 interface configuration, see -.B \-\-client\-config\-dir -and -.B \-\-ifconfig\-push -for more details. -.TP -.B \-\-iroute\-ipv6 ipv6addr/bits -for ccd/ per\-client static IPv6 route configuration, see -.B \-\-iroute -for more details how to setup and use this, and how -.B \-\-iroute -and -.B \-\-route -interact. - -.\"********************************************************* -.SH SCRIPTING AND ENVIRONMENTAL VARIABLES -OpenVPN exports a series -of environmental variables for use by user\-defined scripts. -.\"********************************************************* -.SS Script Order of Execution -.\"********************************************************* -.TP -.B \-\-up -Executed after TCP/UDP socket bind and TUN/TAP open. -.\"********************************************************* -.TP -.B \-\-tls\-verify -Executed when we have a still untrusted remote peer. -.\"********************************************************* -.TP -.B \-\-ipchange -Executed after connection authentication, or remote IP address change. -.\"********************************************************* -.TP -.B \-\-client\-connect -Executed in -.B \-\-mode server -mode immediately after client authentication. -.\"********************************************************* -.TP -.B \-\-route\-up -Executed after connection authentication, either -immediately after, or some number of seconds after -as defined by the -.B \-\-route\-delay -option. -.\"********************************************************* -.TP -.B \-\-route\-pre\-down -Executed right before the routes are removed. -.\"********************************************************* -.TP -.B \-\-client\-disconnect -Executed in -.B \-\-mode server -mode on client instance shutdown. -.\"********************************************************* -.TP -.B \-\-down -Executed after TCP/UDP and TUN/TAP close. -.\"********************************************************* -.TP -.B \-\-learn\-address -Executed in -.B \-\-mode server -mode whenever an IPv4 address/route or MAC address is added to OpenVPN's -internal routing table. -.\"********************************************************* -.TP -.B \-\-auth\-user\-pass\-verify -Executed in -.B \-\-mode server -mode on new client connections, when the client is -still untrusted. -.\"********************************************************* -.SS String Types and Remapping -In certain cases, OpenVPN will perform remapping of characters -in strings. Essentially, any characters outside the set of -permitted characters for each string type will be converted -to underbar ('_'). - -.B Q: -Why is string remapping necessary? - -.B A: -It's an important security feature to prevent the malicious coding of -strings from untrusted sources to be passed as parameters to scripts, -saved in the environment, used as a common name, translated to a filename, -etc. - -.B Q: -Can string remapping be disabled? - -.B A: -Yes, by using the -.B \-\-no\-name\-remapping -option, however this should be considered an advanced option. - -Here is a brief rundown of OpenVPN's current string types and the -permitted character class for each string: - -.B X509 Names: -Alphanumeric, underbar ('_'), dash ('\-'), dot ('.'), at -('@'), colon (':'), slash ('/'), and equal ('='). Alphanumeric is defined -as a character which will cause the C library isalnum() function to return -true. - -.B Common Names: -Alphanumeric, underbar ('_'), dash ('\-'), dot ('.'), and at -('@'). - -.B \-\-auth\-user\-pass username: -Same as Common Name, with one exception: starting with OpenVPN 2.0.1, -the username is passed to the OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY plugin in its raw form, -without string remapping. - -.B \-\-auth\-user\-pass password: -Any "printable" character except CR or LF. -Printable is defined to be a character which will cause the C library -isprint() function to return true. - -.B \-\-client\-config\-dir filename as derived from common name or username: -Alphanumeric, underbar ('_'), dash ('\-'), and dot ('.') except for "." or -".." as standalone strings. As of v2.0.1\-rc6, the at ('@') character has -been added as well for compatibility with the common name character class. - -.B Environmental variable names: -Alphanumeric or underbar ('_'). - -.B Environmental variable values: -Any printable character. - -For all cases, characters in a string which are not members of the legal -character class for that string type will be remapped to underbar ('_'). -.\"********************************************************* -.SS Environmental Variables -Once set, a variable is persisted -indefinitely until it is reset by a new value or a restart, - -As of OpenVPN 2.0\-beta12, in server mode, environmental -variables set by OpenVPN -are scoped according to the client objects -they are -associated with, so there should not be any issues with -scripts having access to stale, previously set variables -which refer to different client instances. -.\"********************************************************* -.TP -.B bytes_received -Total number of bytes received from client during VPN session. -Set prior to execution of the -.B \-\-client\-disconnect -script. -.\"********************************************************* -.TP -.B bytes_sent -Total number of bytes sent to client during VPN session. -Set prior to execution of the -.B \-\-client\-disconnect -script. -.\"********************************************************* -.TP -.B common_name -The X509 common name of an authenticated client. -Set prior to execution of -.B \-\-client\-connect, \-\-client\-disconnect, -and -.B \-\-auth\-user\-pass\-verify -scripts. -.\"********************************************************* -.TP -.B config -Name of first -.B \-\-config -file. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B daemon -Set to "1" if the -.B \-\-daemon -directive is specified, or "0" otherwise. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B daemon_log_redirect -Set to "1" if the -.B \-\-log -or -.B \-\-log\-append -directives are specified, or "0" otherwise. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B dev -The actual name of the TUN/TAP device, including -a unit number if it exists. -Set prior to -.B \-\-up -or -.B \-\-down -script execution. -.\"********************************************************* -.TP -.B dev_idx -On Windows, the device index of the TUN/TAP adapter (to -be used in netsh.exe calls which sometimes just do not work -right with interface names). -Set prior to -.B \-\-up -or -.B \-\-down -script execution. -.\"********************************************************* -.TP -.B foreign_option_{n} -An option pushed via -.B \-\-push -to a client which does not natively support it, -such as -.B \-\-dhcp\-option -on a non\-Windows system, will be recorded to this -environmental variable sequence prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_broadcast -The broadcast address for the virtual -ethernet segment which is derived from the -.B \-\-ifconfig -option when -.B \-\-dev tap -is used. -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_ipv6_local -The local VPN endpoint IPv6 address specified in the -.B \-\-ifconfig\-ipv6 -option (first parameter). -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_ipv6_netbits -The prefix length of the IPv6 network on the VPN interface. Derived from -the /nnn parameter of the IPv6 address in the -.B \-\-ifconfig\-ipv6 -option (first parameter). -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_ipv6_remote -The remote VPN endpoint IPv6 address specified in the -.B \-\-ifconfig\-ipv6 -option (second parameter). -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_local -The local VPN endpoint IP address specified in the -.B \-\-ifconfig -option (first parameter). -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_remote -The remote VPN endpoint IP address specified in the -.B \-\-ifconfig -option (second parameter) when -.B \-\-dev tun -is used. -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_netmask -The subnet mask of the virtual ethernet segment -that is specified as the second parameter to -.B \-\-ifconfig -when -.B \-\-dev tap -is being used. -Set prior to OpenVPN calling the -.I ifconfig -or -.I netsh -(windows version of ifconfig) commands which -normally occurs prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B ifconfig_pool_local_ip -The local -virtual IP address for the TUN/TAP tunnel taken from an -.B \-\-ifconfig\-push -directive if specified, or otherwise from -the ifconfig pool (controlled by the -.B \-\-ifconfig\-pool -config file directive). -Only set for -.B \-\-dev tun -tunnels. -This option is set on the server prior to execution -of the -.B \-\-client\-connect -and -.B \-\-client\-disconnect -scripts. -.\"********************************************************* -.TP -.B ifconfig_pool_netmask -The -virtual IP netmask for the TUN/TAP tunnel taken from an -.B \-\-ifconfig\-push -directive if specified, or otherwise from -the ifconfig pool (controlled by the -.B \-\-ifconfig\-pool -config file directive). -Only set for -.B \-\-dev tap -tunnels. -This option is set on the server prior to execution -of the -.B \-\-client\-connect -and -.B \-\-client\-disconnect -scripts. -.\"********************************************************* -.TP -.B ifconfig_pool_remote_ip -The remote -virtual IP address for the TUN/TAP tunnel taken from an -.B \-\-ifconfig\-push -directive if specified, or otherwise from -the ifconfig pool (controlled by the -.B \-\-ifconfig\-pool -config file directive). -This option is set on the server prior to execution -of the -.B \-\-client\-connect -and -.B \-\-client\-disconnect -scripts. -.\"********************************************************* -.TP -.B link_mtu -The maximum packet size (not including the IP header) -of tunnel data in UDP tunnel transport mode. -Set prior to -.B \-\-up -or -.B \-\-down -script execution. -.\"********************************************************* -.TP -.B local -The -.B \-\-local -parameter. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B local_port -The local port number or name, specified by -.B \-\-port -or -.B \-\-lport. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B password -The password provided by a connecting client. -Set prior to -.B \-\-auth\-user\-pass\-verify -script execution only when the -.B via\-env -modifier is specified, and deleted from the environment -after the script returns. -.\"********************************************************* -.TP -.B proto -The -.B \-\-proto -parameter. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B remote_{n} -The -.B \-\-remote -parameter. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B remote_port_{n} -The remote port number, specified by -.B \-\-port -or -.B \-\-rport. -Set on program initiation and reset on SIGHUP. -.\"********************************************************* -.TP -.B route_net_gateway -The pre\-existing default IP gateway in the system routing -table. -Set prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B route_vpn_gateway -The default gateway used by -.B \-\-route -options, as specified in either the -.B \-\-route\-gateway -option or the second parameter to -.B \-\-ifconfig -when -.B \-\-dev tun -is specified. -Set prior to -.B \-\-up -script execution. -.\"********************************************************* -.TP -.B route_{parm}_{n} -A set of variables which define each route to be added, and -are set prior to -.B \-\-up -script execution. - -.B parm -will be one of "network", "netmask", "gateway", or "metric". - -.B n -is the OpenVPN route number, starting from 1. - -If the network or gateway are resolvable DNS names, -their IP address translations will be recorded rather -than their names as denoted on the command line -or configuration file. -.\"********************************************************* -.TP -.B route_ipv6_{parm}_{n} -A set of variables which define each IPv6 route to be added, and -are set prior to -.B \-\-up -script execution. - -.B parm -will be one of "network" or "gateway" ("netmask" is contained as "/nnn" -in the route_ipv6_network_{n}, unlike IPv4 where it is passed in a separate -environment variable). - -.B n -is the OpenVPN route number, starting from 1. - -If the network or gateway are resolvable DNS names, -their IP address translations will be recorded rather -than their names as denoted on the command line -or configuration file. -.\"********************************************************* -.TP -.B peer_cert -Temporary file name containing the client certificate upon -connection. Useful in conjunction with \-\-tls\-verify -.\"********************************************************* -.TP -.B script_context -Set to "init" or "restart" prior to up/down script execution. -For more information, see -documentation for -.B \-\-up. -.\"********************************************************* -.TP -.B script_type -Prior to execution of any script, this variable is set to the type of -script being run. It can be one of the following: -.B up, down, ipchange, route\-up, tls\-verify, auth\-user\-pass\-verify, -.B client\-connect, client\-disconnect, -or -.B learn\-address. -Set prior to execution of any script. -.\"********************************************************* -.TP -.B signal -The reason for exit or restart. Can be one of -.B sigusr1, sighup, sigterm, sigint, inactive -(controlled by -.B \-\-inactive -option), -.B ping\-exit -(controlled by -.B \-\-ping\-exit -option), -.B ping\-restart -(controlled by -.B \-\-ping\-restart -option), -.B connection\-reset -(triggered on TCP connection reset), -.B error, -or -.B unknown -(unknown signal). This variable is set just prior to down script execution. -.\"********************************************************* -.TP -.B time_ascii -Client connection timestamp, formatted as a human\-readable -time string. -Set prior to execution of the -.B \-\-client\-connect -script. -.\"********************************************************* -.TP -.B time_duration -The duration (in seconds) of the client session which is now -disconnecting. -Set prior to execution of the -.B \-\-client\-disconnect -script. -.\"********************************************************* -.TP -.B time_unix -Client connection timestamp, formatted as a unix integer -date/time value. -Set prior to execution of the -.B \-\-client\-connect -script. -.\"********************************************************* -.TP -.B tls_digest_{n} / tls_digest_sha256_{n} -Contains the certificate SHA1 / SHA256 fingerprint, where -.B n -is the verification level. Only set for TLS connections. Set prior -to execution of -.B \-\-tls\-verify -script. -.\"********************************************************* -.TP -.B tls_id_{n} -A series of certificate fields from the remote peer, -where -.B n -is the verification level. Only set for TLS connections. Set prior -to execution of -.B \-\-tls\-verify -script. -.\"********************************************************* -.TP -.B tls_serial_{n} -The serial number of the certificate from the remote peer, -where -.B n -is the verification level. Only set for TLS connections. Set prior -to execution of -.B \-\-tls\-verify -script. This is in the form of a decimal string like "933971680", which is -suitable for doing serial\-based OCSP queries (with OpenSSL, do not -prepend "0x" to the string) If something goes wrong while reading -the value from the certificate it will be an empty string, so your -code should check that. -See the contrib/OCSP_check/OCSP_check.sh script for an example. -.\"********************************************************* -.TP -.B tls_serial_hex_{n} -Like -.B tls_serial_{n}\fR, -but in hex form (e.g. "12:34:56:78:9A"). -.\"********************************************************* -.TP -.B tun_mtu -The MTU of the TUN/TAP device. -Set prior to -.B \-\-up -or -.B \-\-down -script execution. -.\"********************************************************* -.TP -.B trusted_ip (or trusted_ip6) -Actual IP address of connecting client or peer which has been authenticated. -Set prior to execution of -.B \-\-ipchange, \-\-client\-connect, -and -.B \-\-client\-disconnect -scripts. -If using ipv6 endpoints (udp6, tcp6), -.B trusted_ip6 -will be set instead. -.\"********************************************************* -.TP -.B trusted_port -Actual port number of connecting client or peer which has been authenticated. -Set prior to execution of -.B \-\-ipchange, \-\-client\-connect, -and -.B \-\-client\-disconnect -scripts. -.\"********************************************************* -.TP -.B untrusted_ip (or untrusted_ip6) -Actual IP address of connecting client or peer which has not been authenticated -yet. Sometimes used to -.B nmap -the connecting host in a -.B \-\-tls\-verify -script to ensure it is firewalled properly. -Set prior to execution of -.B \-\-tls\-verify -and -.B \-\-auth\-user\-pass\-verify -scripts. -If using ipv6 endpoints (udp6, tcp6), -.B untrusted_ip6 -will be set instead. -.\"********************************************************* -.TP -.B untrusted_port -Actual port number of connecting client or peer which has not been authenticated -yet. -Set prior to execution of -.B \-\-tls\-verify -and -.B \-\-auth\-user\-pass\-verify -scripts. -.\"********************************************************* -.TP -.B username -The username provided by a connecting client. -Set prior to -.B \-\-auth\-user\-pass\-verify -script execution only when the -.B via\-env -modifier is specified. -.\"********************************************************* -.TP -.B X509_{n}_{subject_field} -An X509 subject field from the remote peer certificate, -where -.B n -is the verification level. Only set for TLS connections. Set prior -to execution of -.B \-\-tls\-verify -script. This variable is similar to -.B tls_id_{n} -except the component X509 subject fields are broken out, and -no string remapping occurs on these field values (except for remapping -of control characters to "_"). -For example, the following variables would be set on the -OpenVPN server using the sample client certificate -in sample\-keys (client.crt). -Note that the verification level is 0 for the client certificate -and 1 for the CA certificate. - -.nf -.ft 3 -.in +4 -X509_0_emailAddress=me@myhost.mydomain -X509_0_CN=Test\-Client -X509_0_O=OpenVPN\-TEST -X509_0_ST=NA -X509_0_C=KG -X509_1_emailAddress=me@myhost.mydomain -X509_1_O=OpenVPN\-TEST -X509_1_L=BISHKEK -X509_1_ST=NA -X509_1_C=KG -.in -4 -.ft -.fi -.\"********************************************************* -.SH INLINE FILE SUPPORT -OpenVPN allows including files in the main configuration for the -.B \-\-ca, \-\-cert, \-\-dh, \-\-extra\-certs, \-\-key, \-\-pkcs12, \-\-secret, -.B \-\-crl\-verify, \-\-http\-proxy\-user\-pass, \-\-tls\-auth -and -.B \-\-tls\-crypt -options. - -Each inline file started by the line -.B <option> -and ended by the line -.B </option> - -Here is an example of an inline file usage - -.nf -.ft 3 -.in +4 -<cert> -\-\-\-\-\-BEGIN CERTIFICATE\-\-\-\-\- -[...] -\-\-\-\-\-END CERTIFICATE\-\-\-\-\- -</cert> -.in -4 -.ft -.fi - -When using the inline file feature with -.B \-\-pkcs12 -the inline file has to be base64 encoded. Encoding of a .p12 file into base64 can be done for example with OpenSSL by running -.B openssl base64 \-in input.p12 - -.SH SIGNALS -.TP -.B SIGHUP -Cause OpenVPN to close all TUN/TAP and -network connections, -restart, re\-read the configuration file (if any), -and reopen TUN/TAP and network connections. -.\"********************************************************* -.TP -.B SIGUSR1 -Like -.B SIGHUP, -except don't re\-read configuration file, and possibly don't close and reopen TUN/TAP -device, re\-read key files, preserve local IP address/port, or preserve most recently authenticated -remote IP address/port based on -.B \-\-persist\-tun, \-\-persist\-key, \-\-persist\-local\-ip, -and -.B \-\-persist\-remote\-ip -options respectively (see above). - -This signal may also be internally generated by a timeout condition, governed -by the -.B \-\-ping\-restart -option. - -This signal, when combined with -.B \-\-persist\-remote\-ip, -may be -sent when the underlying parameters of the host's network interface change -such as when the host is a DHCP client and is assigned a new IP address. -See -.B \-\-ipchange -above for more information. -.\"********************************************************* -.TP -.B SIGUSR2 -Causes OpenVPN to display its current statistics (to the syslog -file if -.B \-\-daemon -is used, or stdout otherwise). -.\"********************************************************* -.TP -.B SIGINT, SIGTERM -Causes OpenVPN to exit gracefully. -.\"********************************************************* -.SH TUN/TAP DRIVER SETUP -If you are running Linux 2.4.7 or higher, you probably have the TUN/TAP driver -already installed. If so, there are still a few things you need to do: - -Make device: -.B mknod /dev/net/tun c 10 200 - -Load driver: -.B modprobe tun -.\"********************************************************* -.SH EXAMPLES -Prior to running these examples, you should have OpenVPN installed on two -machines with network connectivity between them. If you have not -yet installed OpenVPN, consult the INSTALL file included in the OpenVPN -distribution. -.\"********************************************************* -.SS TUN/TAP Setup: -If you are using Linux 2.4 or higher, -make the tun device node and load the tun module: -.IP -.B mknod /dev/net/tun c 10 200 -.LP -.IP -.B modprobe tun -.LP -If you installed from RPM, the -.B mknod -step may be omitted, because the RPM install does that for you. - -Only Linux 2.4 and newer are supported. - -For other platforms, consult the INSTALL file at -.I http://openvpn.net/install.html -for more information. -.\"********************************************************* -.SS Firewall Setup: -If firewalls exist between -the two machines, they should be set to forward UDP port 1194 -in both directions. If you do not have control over the firewalls -between the two machines, you may still be able to use OpenVPN by adding -.B \-\-ping 15 -to each of the -.B openvpn -commands used below in the examples (this will cause each peer to send out -a UDP ping to its remote peer once every 15 seconds which will cause many -stateful firewalls to forward packets in both directions -without an explicit firewall rule). - -If you are using a Linux iptables\-based firewall, you may need to enter -the following command to allow incoming packets on the TUN device: -.IP -.B iptables \-A INPUT \-i tun+ \-j ACCEPT -.LP -See the firewalls section below for more information on configuring firewalls -for use with OpenVPN. -.\"********************************************************* -.SS VPN Address Setup: -For purposes -of our example, our two machines will be called -.B bob.example.com -and -.B alice.example.com. -If you are constructing a VPN over the internet, then replace -.B bob.example.com -and -.B alice.example.com -with the internet hostname or IP address that each machine will use -to contact the other over the internet. - -Now we will choose the tunnel endpoints. Tunnel endpoints are -private IP addresses that only have meaning in the context of -the VPN. Each machine will use the tunnel endpoint of the other -machine to access it over the VPN. In our example, -the tunnel endpoint for bob.example.com -will be 10.4.0.1 and for alice.example.com, 10.4.0.2. - -Once the VPN is established, you have essentially -created a secure alternate path between the two hosts -which is addressed by using the tunnel endpoints. You can -control which network -traffic passes between the hosts -(a) over the VPN or (b) independently of the VPN, by choosing whether to use -(a) the VPN endpoint address or (b) the public internet address, -to access the remote host. For example if you are on bob.example.com and you wish to connect to alice.example.com -via -.B ssh -without using the VPN (since -.B ssh -has its own built\-in security) you would use the command -.B ssh alice.example.com. -However in the same scenario, you could also use the command -.B telnet 10.4.0.2 -to create a telnet session with alice.example.com over the VPN, that would -use the VPN to secure the session rather than -.B ssh. - -You can use any address you wish for the -tunnel endpoints -but make sure that they are private addresses -(such as those that begin with 10 or 192.168) and that they are -not part of any existing subnet on the networks of -either peer, unless you are bridging. If you use an address that is part of -your local subnet for either of the tunnel endpoints, -you will get a weird feedback loop. -.\"********************************************************* -.SS Example 1: A simple tunnel without security -.LP -On bob: -.IP -.B openvpn \-\-remote alice.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-verb 9 -.LP -On alice: -.IP -.B openvpn \-\-remote bob.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-verb 9 -.LP -Now verify the tunnel is working by pinging across the tunnel. -.LP -On bob: -.IP -.B ping 10.4.0.2 -.LP -On alice: -.IP -.B ping 10.4.0.1 -.LP -The -.B \-\-verb 9 -option will produce verbose output, similar to the -.BR tcpdump (8) -program. Omit the -.B \-\-verb 9 -option to have OpenVPN run quietly. -.\"********************************************************* -.SS Example 2: A tunnel with static\-key security (i.e. using a pre\-shared secret) -First build a static key on bob. -.IP -.B openvpn \-\-genkey \-\-secret key -.LP -This command will build a random key file called -.B key -(in ascii format). -Now copy -.B key -to alice over a secure medium such as by -using the -.BR scp (1) -program. -.LP -On bob: -.IP -.B openvpn \-\-remote alice.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-verb 5 \-\-secret key -.LP -On alice: -.IP -.B openvpn \-\-remote bob.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-verb 5 \-\-secret key -.LP -Now verify the tunnel is working by pinging across the tunnel. -.LP -On bob: -.IP -.B ping 10.4.0.2 -.LP -On alice: -.IP -.B ping 10.4.0.1 -.\"********************************************************* -.SS Example 3: A tunnel with full TLS\-based security -For this test, we will designate -.B bob -as the TLS client and -.B alice -as the TLS server. -.I Note that client or server designation only has meaning for the TLS subsystem. It has no bearing on OpenVPN's peer\-to\-peer, UDP\-based communication model. - -First, build a separate certificate/key pair -for both bob and alice (see above where -.B \-\-cert -is discussed for more info). Then construct -Diffie Hellman parameters (see above where -.B \-\-dh -is discussed for more info). You can also use the -included test files client.crt, client.key, -server.crt, server.key and ca.crt. -The .crt files are certificates/public\-keys, the .key -files are private keys, and ca.crt is a certification -authority who has signed both -client.crt and server.crt. For Diffie Hellman -parameters you can use the included file dh1024.pem. -.I Note that all client, server, and certificate authority certificates and keys included in the OpenVPN distribution are totally insecure and should be used for testing only. -.LP -On bob: -.IP -.B openvpn \-\-remote alice.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-tls\-client \-\-ca ca.crt \-\-cert client.crt \-\-key client.key \-\-reneg\-sec 60 \-\-verb 5 -.LP -On alice: -.IP -.B openvpn \-\-remote bob.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-tls\-server \-\-dh dh1024.pem \-\-ca ca.crt \-\-cert server.crt \-\-key server.key \-\-reneg\-sec 60 \-\-verb 5 -.LP -Now verify the tunnel is working by pinging across the tunnel. -.LP -On bob: -.IP -.B ping 10.4.0.2 -.LP -On alice: -.IP -.B ping 10.4.0.1 -.LP -Notice the -.B \-\-reneg\-sec 60 -option we used above. That tells OpenVPN to renegotiate -the data channel keys every minute. -Since we used -.B \-\-verb 5 -above, you will see status information on each new key negotiation. - -For production operations, a key renegotiation interval of 60 seconds -is probably too frequent. Omit the -.B \-\-reneg\-sec 60 -option to use OpenVPN's default key renegotiation interval of one hour. -.\"********************************************************* -.SS Routing: -Assuming you can ping across the tunnel, -the next step is to route a real subnet over -the secure tunnel. Suppose that bob and alice have two network -interfaces each, one connected -to the internet, and the other to a private -network. Our goal is to securely connect -both private networks. We will assume that bob's private subnet -is 10.0.0.0/24 and alice's is 10.0.1.0/24. -.LP -First, ensure that IP forwarding is enabled on both peers. -On Linux, enable routing: -.IP -.B echo 1 > /proc/sys/net/ipv4/ip_forward -.LP -and enable TUN packet forwarding through the firewall: -.IP -.B iptables \-A FORWARD \-i tun+ \-j ACCEPT -.LP -On bob: -.IP -.B route add \-net 10.0.1.0 netmask 255.255.255.0 gw 10.4.0.2 -.LP -On alice: -.IP -.B route add \-net 10.0.0.0 netmask 255.255.255.0 gw 10.4.0.1 -.LP -Now any machine on the 10.0.0.0/24 subnet can -access any machine on the 10.0.1.0/24 subnet -over the secure tunnel (or vice versa). - -In a production environment, you could put the route command(s) -in a script and execute with the -.B \-\-up -option. -.\"********************************************************* -.SH FIREWALLS -OpenVPN's usage of a single UDP port makes it fairly firewall\-friendly. -You should add an entry to your firewall rules to allow incoming OpenVPN -packets. On Linux 2.4+: -.IP -.B iptables \-A INPUT \-p udp \-s 1.2.3.4 \-\-dport 1194 \-j ACCEPT -.LP -This will allow incoming packets on UDP port 1194 (OpenVPN's default UDP port) -from an OpenVPN peer at 1.2.3.4. - -If you are using HMAC\-based packet authentication (the default in any of -OpenVPN's secure modes), having the firewall filter on source -address can be considered optional, since HMAC packet authentication -is a much more secure method of verifying the authenticity of -a packet source. In that case: -.IP -.B iptables \-A INPUT \-p udp \-\-dport 1194 \-j ACCEPT -.LP -would be adequate and would not render the host inflexible with -respect to its peer having a dynamic IP address. - -OpenVPN also works well on stateful firewalls. In some cases, you may -not need to add any static rules to the firewall list if you are -using a stateful firewall that knows how to track UDP connections. -If you specify -.B \-\-ping n, -OpenVPN will be guaranteed -to send a packet to its peer at least once every -.B n -seconds. If -.B n -is less than the stateful firewall connection timeout, you can -maintain an OpenVPN connection indefinitely without explicit -firewall rules. - -You should also add firewall rules to allow incoming IP traffic on -TUN or TAP devices such as: -.IP -.B iptables \-A INPUT \-i tun+ \-j ACCEPT -.LP -to allow input packets from tun devices, -.IP -.B iptables \-A FORWARD \-i tun+ \-j ACCEPT -.LP -to allow input packets from tun devices to be forwarded to -other hosts on the local network, -.IP -.B iptables \-A INPUT \-i tap+ \-j ACCEPT -.LP -to allow input packets from tap devices, and -.IP -.B iptables \-A FORWARD \-i tap+ \-j ACCEPT -.LP -to allow input packets from tap devices to be forwarded to -other hosts on the local network. - -These rules are secure if you use packet authentication, -since no incoming packets will arrive on a TUN or TAP -virtual device -unless they first pass an HMAC authentication test. -.\"********************************************************* -.SH FAQ -.I http://openvpn.net/faq.html -.\"********************************************************* -.SH HOWTO -For a more comprehensive guide to setting up OpenVPN -in a production setting, see the OpenVPN HOWTO at -.I http://openvpn.net/howto.html -.\"********************************************************* -.SH PROTOCOL -For a description of OpenVPN's underlying protocol, -see -.I http://openvpn.net/security.html -.\"********************************************************* -.SH WEB -OpenVPN's web site is at -.I http://openvpn.net/ - -Go here to download the latest version of OpenVPN, subscribe -to the mailing lists, read the mailing list -archives, or browse the SVN repository. -.\"********************************************************* -.SH BUGS -Report all bugs to the OpenVPN team <info@openvpn.net>. -.\"********************************************************* -.SH "SEE ALSO" -.BR dhcpcd (8), -.BR ifconfig (8), -.BR openssl (1), -.BR route (8), -.BR scp (1) -.BR ssh (1) -.\"********************************************************* -.SH NOTES -.LP -This product includes software developed by the -OpenSSL Project ( -.I http://www.openssl.org/ -) - -For more information on the TLS protocol, see -.I http://www.ietf.org/rfc/rfc2246.txt - -For more information on the LZO real\-time compression library see -.I http://www.oberhumer.com/opensource/lzo/ -.\"********************************************************* -.SH COPYRIGHT -Copyright (C) 2002\-2018 OpenVPN Inc This program is free software; -you can redistribute it and/or modify -it under the terms of the GNU General Public License version 2 -as published by the Free Software Foundation. -.\"********************************************************* -.SH AUTHORS -James Yonan <jim@yonan.net> |