summaryrefslogtreecommitdiff
path: root/sample-config-files/static-office.conf
diff options
context:
space:
mode:
Diffstat (limited to 'sample-config-files/static-office.conf')
-rw-r--r--sample-config-files/static-office.conf69
1 files changed, 0 insertions, 69 deletions
diff --git a/sample-config-files/static-office.conf b/sample-config-files/static-office.conf
deleted file mode 100644
index 68030cc..0000000
--- a/sample-config-files/static-office.conf
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Sample OpenVPN configuration file for
-# office using a pre-shared static key.
-#
-# '#' or ';' may be used to delimit comments.
-
-# Use a dynamic tun device.
-# For Linux 2.2 or non-Linux OSes,
-# you may want to use an explicit
-# unit number such as "tun1".
-# OpenVPN also supports virtual
-# ethernet "tap" devices.
-dev tun
-
-# 10.1.0.1 is our local VPN endpoint (office).
-# 10.1.0.2 is our remote VPN endpoint (home).
-ifconfig 10.1.0.1 10.1.0.2
-
-# Our up script will establish routes
-# once the VPN is alive.
-up ./office.up
-
-# Our pre-shared static key
-secret static.key
-
-# OpenVPN 2.0 uses UDP port 1194 by default
-# (official port assignment by iana.org 11/04).
-# OpenVPN 1.x uses UDP port 5000 by default.
-# Each OpenVPN tunnel must use
-# a different port number.
-# lport or rport can be used
-# to denote different ports
-# for local and remote.
-; port 1194
-
-# Downgrade UID and GID to
-# "nobody" after initialization
-# for extra security.
-; user nobody
-; group nobody
-
-# If you built OpenVPN with
-# LZO compression, uncomment
-# out the following line.
-; comp-lzo
-
-# Send a UDP ping to remote once
-# every 15 seconds to keep
-# stateful firewall connection
-# alive. Uncomment this
-# out if you are using a stateful
-# firewall.
-; ping 15
-
-# Uncomment this section for a more reliable detection when a system
-# loses its connection. For example, dial-ups or laptops that
-# travel to other locations.
-; ping 15
-; ping-restart 45
-; ping-timer-rem
-; persist-tun
-; persist-key
-
-# Verbosity level.
-# 0 -- quiet except for fatal errors.
-# 1 -- mostly quiet, but display non-fatal network errors.
-# 3 -- medium output, good for normal operation.
-# 9 -- verbose, good for troubleshooting
-verb 3