1 files changed, 123 insertions, 0 deletions
diff --git a/sample/sample-config-files/client.conf b/sample/sample-config-files/client.conf
new file mode 100644
index 0000000..58b2038
--- /dev/null
+++ b/sample/sample-config-files/client.conf
@@ -0,0 +1,123 @@
+##############################################
+# Sample client-side OpenVPN 2.0 config file #
+# for connecting to multi-client server.     #
+#                                            #
+# This configuration can be used by multiple #
+# clients, however each client should have   #
+# its own cert and key files.                #
+#                                            #
+# On Windows, you might want to rename this  #
+# file so it has a .ovpn extension           #
+##############################################
+
+# Specify that we are a client and that we
+# will be pulling certain config file directives
+# from the server.
+client
+
+# Use the same setting as you are using on
+# the server.
+# On most systems, the VPN will not function
+# unless you partially or fully disable
+# the firewall for the TUN/TAP interface.
+;dev tap
+dev tun
+
+# Windows needs the TAP-Win32 adapter name
+# from the Network Connections panel
+# if you have more than one.  On XP SP2,
+# you may need to disable the firewall
+# for the TAP adapter.
+;dev-node MyTap
+
+# Are we connecting to a TCP or
+# UDP server?  Use the same setting as
+# on the server.
+;proto tcp
+proto udp
+
+# The hostname/IP and port of the server.
+# You can have multiple remote entries
+# to load balance between the servers.
+remote my-server-1 1194
+;remote my-server-2 1194
+
+# Choose a random host from the remote
+# list for load-balancing.  Otherwise
+# try hosts in the order specified.
+;remote-random
+
+# Keep trying indefinitely to resolve the
+# host name of the OpenVPN server.  Very useful
+# on machines which are not permanently connected
+# to the internet such as laptops.
+resolv-retry infinite
+
+# Most clients don't need to bind to
+# a specific local port number.
+nobind
+
+# Downgrade privileges after initialization (non-Windows only)
+;user nobody
+;group nobody
+
+# Try to preserve some state across restarts.
+persist-key
+persist-tun
+
+# If you are connecting through an
+# HTTP proxy to reach the actual OpenVPN
+# server, put the proxy server/IP and
+# port number here.  See the man page
+# if your proxy server requires
+# authentication.
+;http-proxy-retry # retry on connection failures
+;http-proxy [proxy server] [proxy port #]
+
+# Wireless networks often produce a lot
+# of duplicate packets.  Set this flag
+# to silence duplicate packet warnings.
+;mute-replay-warnings
+
+# SSL/TLS parms.
+# See the server config file for more
+# description.  It's best to use
+# a separate .crt/.key file pair
+# for each client.  A single ca
+# file can be used for all clients.
+ca ca.crt
+cert client.crt
+key client.key
+
+# Verify server certificate by checking
+# that the certicate has the nsCertType
+# field set to "server".  This is an
+# important precaution to protect against
+# a potential attack discussed here:
+#  http://openvpn.net/howto.html#mitm
+#
+# To use this feature, you will need to generate
+# your server certificates with the nsCertType
+# field set to "server".  The build-key-server
+# script in the easy-rsa folder will do this.
+ns-cert-type server
+
+# If a tls-auth key is used on the server
+# then every client must also have the key.
+;tls-auth ta.key 1
+
+# Select a cryptographic cipher.
+# If the cipher option is used on the server
+# then you must also specify it here.
+;cipher x
+
+# Enable compression on the VPN link.
+# Don't enable this unless it is also
+# enabled in the server config file.
+comp-lzo
+
+# Set log file verbosity.
+verb 3
+
+# Silence repeating messages
+;mute 20