summaryrefslogtreecommitdiff
path: root/sample/sample-windows/sample.ovpn
diff options
context:
space:
mode:
Diffstat (limited to 'sample/sample-windows/sample.ovpn')
-rwxr-xr-xsample/sample-windows/sample.ovpn103
1 files changed, 103 insertions, 0 deletions
diff --git a/sample/sample-windows/sample.ovpn b/sample/sample-windows/sample.ovpn
new file mode 100755
index 0000000..5accd57
--- /dev/null
+++ b/sample/sample-windows/sample.ovpn
@@ -0,0 +1,103 @@
+# Edit this file, and save to a .ovpn extension
+# so that OpenVPN will activate it when run
+# as a service.
+
+# Change 'myremote' to be your remote host,
+# or comment out to enter a listening
+# server mode.
+remote myremote
+
+# Uncomment this line to use a different
+# port number than the default of 1194.
+; port 1194
+
+# Choose one of three protocols supported by
+# OpenVPN. If left commented out, defaults
+# to udp.
+; proto [tcp-server | tcp-client | udp]
+
+# You must specify one of two possible network
+# protocols, 'dev tap' or 'dev tun' to be used
+# on both sides of the connection. 'tap' creates
+# a VPN using the ethernet protocol while 'tun'
+# uses the IP protocol. You must use 'tap'
+# if you are ethernet bridging or want to route
+# broadcasts. 'tun' is somewhat more efficient
+# but requires configuration of client software
+# to not depend on broadcasts. Some platforms
+# such as Solaris, OpenBSD, and Mac OS X only
+# support 'tun' interfaces, so if you are
+# connecting to such a platform, you must also
+# use a 'tun' interface on the Windows side.
+
+# Enable 'dev tap' or 'dev tun' but not both!
+dev tap
+
+# This is a 'dev tap' ifconfig that creates
+# a virtual ethernet subnet.
+# 10.3.0.1 is the local VPN IP address
+# and 255.255.255.0 is the VPN subnet.
+# Only define this option for 'dev tap'.
+ifconfig 10.3.0.1 255.255.255.0
+
+# This is a 'dev tun' ifconfig that creates
+# a point-to-point IP link.
+# 10.3.0.1 is the local VPN IP address and
+# 10.3.0.2 is the remote VPN IP address.
+# Only define this option for 'dev tun'.
+# Make sure to include the "tun-mtu" option
+# on the remote machine, but swap the order
+# of the ifconfig addresses.
+;tun-mtu 1500
+;ifconfig 10.3.0.1 10.3.0.2
+
+# If you have fragmentation issues or misconfigured
+# routers in the path which block Path MTU discovery,
+# lower the TCP MSS and internally fragment non-TCP
+# protocols.
+;fragment 1300
+;mssfix
+
+# If you have set up more than one TAP-Win32 adapter
+# on your system, you must refer to it by name.
+;dev-node my-tap
+
+# You can generate a static OpenVPN key
+# by selecting the Generate Key option
+# in the start menu.
+#
+# You can also generate key.txt manually
+# with the following command:
+# openvpn --genkey --secret key.txt
+#
+# key must match on both ends of the connection,
+# so you should generate it on one machine and
+# copy it to the other over a secure medium.
+# Place key.txt in the same directory as this
+# config file.
+secret key.txt
+
+# Uncomment this section for a more reliable
+# detection when a system loses its connection.
+# For example, dial-ups or laptops that travel
+# to other locations.
+#
+# If this section is enabled and "myremote"
+# above is a dynamic DNS name (i.e. dyndns.org),
+# OpenVPN will dynamically "follow" the IP
+# address of "myremote" if it changes.
+; ping-restart 60
+; ping-timer-rem
+; persist-tun
+; persist-key
+; resolv-retry 86400
+
+# keep-alive ping
+ping 10
+
+# enable LZO compression
+comp-lzo
+
+# moderate verbosity
+verb 4
+mute 10