diff options
Diffstat (limited to 'tests/t_client.rc-sample')
| -rw-r--r-- | tests/t_client.rc-sample | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/tests/t_client.rc-sample b/tests/t_client.rc-sample new file mode 100644 index 0000000..4fdea48 --- /dev/null +++ b/tests/t_client.rc-sample @@ -0,0 +1,101 @@ +# +# this is sourced from t_client.sh and defines which openvpn client tests +# to run +# +# (sample config, copy to t_client.rc and adapt to your environment) +# +# +# define these - if empty, no tests will run +# +top_srcdir="${top_srcdir:-..}" +CA_CERT="${top_srcdir}/sample/sample-keys/ca.crt" +CLIENT_KEY="${top_srcdir}/sample/sample-keys/client.key" +CLIENT_CERT="${top_srcdir}/sample/sample-keys/client.crt" +#FPING_EXTRA_ARGS="-t 1000" + +# Load EXPECT_IFCONFIG* parameters from cache +if [ -r "${top_builddir}/t_client_ips.rc" ]; then + . "${top_builddir}/t_client_ips.rc" +else + echo "NOTICE: missing t_client_ips.rc will be auto-generated" +fi + +# +# remote host (used as macro below) +# +REMOTE=mytestserver +# +# tests to run (list suffixes for config stanzas below) +# +TEST_RUN_LIST="1 2" + +# +# use "sudo" (etc) to give openvpn the necessary privileges +# if this is not active, "make check" must be run as root +# +#RUN_SUDO=sudo + +# +# base confic that is the same for all the p2mp test runs +# +OPENVPN_BASE_P2MP="--client --ca $CA_CERT \ + --cert $CLIENT_CERT --key $CLIENT_KEY \ + --ns-cert-type server --nobind --comp-lzo --verb 3" + +# base config for p2p tests +# +OPENVPN_BASE_P2P="..." + +# +# +# now define the individual tests - all variables suffixed with _1, _2 etc +# will be used in test run "1", "2", etc. +# +# if something is not defined here, the corresponding test is not run +# +# possible test options: +# +# RUN_TITLE_x="what is being tested on here" (purely informational) +# OPENVPN_CONF_x = "how to call ./openvpn" [mandatory] +# EXPECT_IFCONFIG4_x = "this IPv4 address needs to show up in ifconfig" +# EXPECT_IFCONFIG6_x = "this IPv6 address needs to show up in ifconfig" +# PING4_HOSTS_x = "these hosts musts ping when openvpn is up (IPv4 fping)" +# PING6_HOSTS_x = "these hosts musts ping when openvpn is up (IPv6 fping6)" +# +# Test 1: UDP / p2mp tun +# specify IPv4+IPv6 addresses expected from server and ping targets +# +RUN_TITLE_1="testing tun/udp/ipv4+ipv6" +OPENVPN_CONF_1="$OPENVPN_BASE_P2MP --dev tun --proto udp --remote $REMOTE --port 51194" +PING4_HOSTS_1="10.100.50.1 10.100.0.1" +PING6_HOSTS_1="2001:db8::1 2001:db8:a050::1" + +# Test 2: TCP / p2mp tun +# +RUN_TITLE_2="testing tun/tcp/ipv4+ipv6" +OPENVPN_CONF_2="$OPENVPN_BASE_P2MP --dev tun --proto tcp --remote $REMOTE --port 51194" +PING4_HOSTS_2="10.100.51.1 10.100.0.1" +PING6_HOSTS_2="2001:db8::1 2001:db8:a051::1" +# +# run command after openvpn initialization is done - here: delay 5 seconds +POSTINIT_CMD_2="sleep 5" + +# Test 3: UDP / p2p tun +# ... + +# Test 4: TCP / p2p tun +# ... + +# Test 5: UDP / p2mp tap +# ... + +# Test 6: TCP / p2mp tun +# ... + +# Test 7: UDP / p2p tap +# ... + +# Test 8: TCP / p2p tap +# ... + +# Test 9: whatever you want to test... :-) |