From 349cfa7acb95abe865209a28e417ec74b56f9bba Mon Sep 17 00:00:00 2001 From: Alberto Gonzalez Iniesta Date: Tue, 21 Feb 2012 15:53:40 +0100 Subject: Imported Upstream version 2.2.1 --- sample-config-files/server.conf | 299 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 299 insertions(+) create mode 100644 sample-config-files/server.conf (limited to 'sample-config-files/server.conf') diff --git a/sample-config-files/server.conf b/sample-config-files/server.conf new file mode 100644 index 0000000..f483b6b --- /dev/null +++ b/sample-config-files/server.conf @@ -0,0 +1,299 @@ +################################################# +# Sample OpenVPN 2.0 config file for # +# multi-client server. # +# # +# This file is for the server side # +# of a many-clients <-> one-server # +# OpenVPN configuration. # +# # +# OpenVPN also supports # +# single-machine <-> single-machine # +# configurations (See the Examples page # +# on the web site for more info). # +# # +# This config should work on Windows # +# or Linux/BSD systems. Remember on # +# Windows to quote pathnames and use # +# double backslashes, e.g.: # +# "C:\\Program Files\\OpenVPN\\config\\foo.key" # +# # +# Comments are preceded with '#' or ';' # +################################################# + +# Which local IP address should OpenVPN +# listen on? (optional) +;local a.b.c.d + +# Which TCP/UDP port should OpenVPN listen on? +# If you want to run multiple OpenVPN instances +# on the same machine, use a different port +# number for each one. You will need to +# open up this port on your firewall. +port 1194 + +# TCP or UDP server? +;proto tcp +proto udp + +# "dev tun" will create a routed IP tunnel, +# "dev tap" will create an ethernet tunnel. +# Use "dev tap0" if you are ethernet bridging +# and have precreated a tap0 virtual interface +# and bridged it with your ethernet interface. +# If you want to control access policies +# over the VPN, you must create firewall +# rules for the the TUN/TAP interface. +# On non-Windows systems, you can give +# an explicit unit number, such as tun0. +# On Windows, use "dev-node" for this. +# On most systems, the VPN will not function +# unless you partially or fully disable +# the firewall for the TUN/TAP interface. +;dev tap +dev tun + +# Windows needs the TAP-Win32 adapter name +# from the Network Connections panel if you +# have more than one. On XP SP2 or higher, +# you may need to selectively disable the +# Windows firewall for the TAP adapter. +# Non-Windows systems usually don't need this. +;dev-node MyTap + +# SSL/TLS root certificate (ca), certificate +# (cert), and private key (key). Each client +# and the server must have their own cert and +# key file. The server and all clients will +# use the same ca file. +# +# See the "easy-rsa" directory for a series +# of scripts for generating RSA certificates +# and private keys. Remember to use +# a unique Common Name for the server +# and each of the client certificates. +# +# Any X509 key management system can be used. +# OpenVPN can also use a PKCS #12 formatted key file +# (see "pkcs12" directive in man page). +ca ca.crt +cert server.crt +key server.key # This file should be kept secret + +# Diffie hellman parameters. +# Generate your own with: +# openssl dhparam -out dh1024.pem 1024 +# Substitute 2048 for 1024 if you are using +# 2048 bit keys. +dh dh1024.pem + +# Configure server mode and supply a VPN subnet +# for OpenVPN to draw client addresses from. +# The server will take 10.8.0.1 for itself, +# the rest will be made available to clients. +# Each client will be able to reach the server +# on 10.8.0.1. Comment this line out if you are +# ethernet bridging. See the man page for more info. +server 10.8.0.0 255.255.255.0 + +# Maintain a record of client <-> virtual IP address +# associations in this file. If OpenVPN goes down or +# is restarted, reconnecting clients can be assigned +# the same virtual IP address from the pool that was +# previously assigned. +ifconfig-pool-persist ipp.txt + +# Configure server mode for ethernet bridging. +# You must first use your OS's bridging capability +# to bridge the TAP interface with the ethernet +# NIC interface. Then you must manually set the +# IP/netmask on the bridge interface, here we +# assume 10.8.0.4/255.255.255.0. Finally we +# must set aside an IP range in this subnet +# (start=10.8.0.50 end=10.8.0.100) to allocate +# to connecting clients. Leave this line commented +# out unless you are ethernet bridging. +;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 + +# Configure server mode for ethernet bridging +# using a DHCP-proxy, where clients talk +# to the OpenVPN server-side DHCP server +# to receive their IP address allocation +# and DNS server addresses. You must first use +# your OS's bridging capability to bridge the TAP +# interface with the ethernet NIC interface. +# Note: this mode only works on clients (such as +# Windows), where the client-side TAP adapter is +# bound to a DHCP client. +;server-bridge + +# Push routes to the client to allow it +# to reach other private subnets behind +# the server. Remember that these +# private subnets will also need +# to know to route the OpenVPN client +# address pool (10.8.0.0/255.255.255.0) +# back to the OpenVPN server. +;push "route 192.168.10.0 255.255.255.0" +;push "route 192.168.20.0 255.255.255.0" + +# To assign specific IP addresses to specific +# clients or if a connecting client has a private +# subnet behind it that should also have VPN access, +# use the subdirectory "ccd" for client-specific +# configuration files (see man page for more info). + +# EXAMPLE: Suppose the client +# having the certificate common name "Thelonious" +# also has a small subnet behind his connecting +# machine, such as 192.168.40.128/255.255.255.248. +# First, uncomment out these lines: +;client-config-dir ccd +;route 192.168.40.128 255.255.255.248 +# Then create a file ccd/Thelonious with this line: +# iroute 192.168.40.128 255.255.255.248 +# This will allow Thelonious' private subnet to +# access the VPN. This example will only work +# if you are routing, not bridging, i.e. you are +# using "dev tun" and "server" directives. + +# EXAMPLE: Suppose you want to give +# Thelonious a fixed VPN IP address of 10.9.0.1. +# First uncomment out these lines: +;client-config-dir ccd +;route 10.9.0.0 255.255.255.252 +# Then add this line to ccd/Thelonious: +# ifconfig-push 10.9.0.1 10.9.0.2 + +# Suppose that you want to enable different +# firewall access policies for different groups +# of clients. There are two methods: +# (1) Run multiple OpenVPN daemons, one for each +# group, and firewall the TUN/TAP interface +# for each group/daemon appropriately. +# (2) (Advanced) Create a script to dynamically +# modify the firewall in response to access +# from different clients. See man +# page for more info on learn-address script. +;learn-address ./script + +# If enabled, this directive will configure +# all clients to redirect their default +# network gateway through the VPN, causing +# all IP traffic such as web browsing and +# and DNS lookups to go through the VPN +# (The OpenVPN server machine may need to NAT +# or bridge the TUN/TAP interface to the internet +# in order for this to work properly). +;push "redirect-gateway def1 bypass-dhcp" + +# Certain Windows-specific network settings +# can be pushed to clients, such as DNS +# or WINS server addresses. CAVEAT: +# http://openvpn.net/faq.html#dhcpcaveats +# The addresses below refer to the public +# DNS servers provided by opendns.com. +;push "dhcp-option DNS 208.67.222.222" +;push "dhcp-option DNS 208.67.220.220" + +# Uncomment this directive to allow different +# clients to be able to "see" each other. +# By default, clients will only see the server. +# To force clients to only see the server, you +# will also need to appropriately firewall the +# server's TUN/TAP interface. +;client-to-client + +# Uncomment this directive if multiple clients +# might connect with the same certificate/key +# files or common names. This is recommended +# only for testing purposes. For production use, +# each client should have its own certificate/key +# pair. +# +# IF YOU HAVE NOT GENERATED INDIVIDUAL +# CERTIFICATE/KEY PAIRS FOR EACH CLIENT, +# EACH HAVING ITS OWN UNIQUE "COMMON NAME", +# UNCOMMENT THIS LINE OUT. +;duplicate-cn + +# The keepalive directive causes ping-like +# messages to be sent back and forth over +# the link so that each side knows when +# the other side has gone down. +# Ping every 10 seconds, assume that remote +# peer is down if no ping received during +# a 120 second time period. +keepalive 10 120 + +# For extra security beyond that provided +# by SSL/TLS, create an "HMAC firewall" +# to help block DoS attacks and UDP port flooding. +# +# Generate with: +# openvpn --genkey --secret ta.key +# +# The server and each client must have +# a copy of this key. +# The second parameter should be '0' +# on the server and '1' on the clients. +;tls-auth ta.key 0 # This file is secret + +# Select a cryptographic cipher. +# This config item must be copied to +# the client config file as well. +;cipher BF-CBC # Blowfish (default) +;cipher AES-128-CBC # AES +;cipher DES-EDE3-CBC # Triple-DES + +# Enable compression on the VPN link. +# If you enable it here, you must also +# enable it in the client config file. +comp-lzo + +# The maximum number of concurrently connected +# clients we want to allow. +;max-clients 100 + +# It's a good idea to reduce the OpenVPN +# daemon's privileges after initialization. +# +# You can uncomment this out on +# non-Windows systems. +;user nobody +;group nobody + +# The persist options will try to avoid +# accessing certain resources on restart +# that may no longer be accessible because +# of the privilege downgrade. +persist-key +persist-tun + +# Output a short status file showing +# current connections, truncated +# and rewritten every minute. +status openvpn-status.log + +# By default, log messages will go to the syslog (or +# on Windows, if running as a service, they will go to +# the "\Program Files\OpenVPN\log" directory). +# Use log or log-append to override this default. +# "log" will truncate the log file on OpenVPN startup, +# while "log-append" will append to it. Use one +# or the other (but not both). +;log openvpn.log +;log-append openvpn.log + +# Set the appropriate level of log +# file verbosity. +# +# 0 is silent, except for fatal errors +# 4 is reasonable for general usage +# 5 and 6 can help to debug connection problems +# 9 is extremely verbose +verb 3 + +# Silence repeating messages. At most 20 +# sequential messages of the same message +# category will be output to the log. +;mute 20 -- cgit v1.2.3