From 57f0b7b331088e489e93ae89ee0aed98381d8806 Mon Sep 17 00:00:00 2001 From: Bernhard Schmidt Date: Tue, 1 Sep 2020 16:53:26 +0200 Subject: New upstream version 2.5~beta3 --- tests/t_client.sh | 426 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 426 insertions(+) create mode 100755 tests/t_client.sh (limited to 'tests/t_client.sh') diff --git a/tests/t_client.sh b/tests/t_client.sh new file mode 100755 index 0000000..9024a06 --- /dev/null +++ b/tests/t_client.sh @@ -0,0 +1,426 @@ +#!/bin/sh +# +# run OpenVPN client against ``test reference'' server +# - check that ping, http, ... via tunnel works +# - check that interface config / routes are properly cleaned after test end +# +# prerequisites: +# - openvpn binary in current directory +# - writable current directory to create subdir for logs +# - t_client.rc in current directory OR source dir that specifies tests +# - for "ping4" checks: fping binary in $PATH +# - for "ping6" checks: fping6 binary in $PATH +# + +srcdir="${srcdir:-.}" +top_builddir="${top_builddir:-..}" +if [ -r "${top_builddir}"/t_client.rc ] ; then + . "${top_builddir}"/t_client.rc +elif [ -r "${srcdir}"/t_client.rc ] ; then + . "${srcdir}"/t_client.rc +else + echo "$0: cannot find 't_client.rc' in build dir ('${top_builddir}')" >&2 + echo "$0: or source directory ('${srcdir}'). SKIPPING TEST." >&2 + exit 77 +fi + +# Check for external dependencies +which fping > /dev/null +if [ $? -ne 0 ]; then + echo "$0: fping is not available in \$PATH" >&2 + exit 77 +fi +which fping6 > /dev/null +if [ $? -ne 0 ]; then + echo "$0: fping6 is not available in \$PATH" >&2 + exit 77 +fi + +KILL_EXEC=`which kill` +if [ $? -ne 0 ]; then + echo "$0: kill not found in \$PATH" >&2 + exit 77 +fi + +if [ ! -x "${top_builddir}/src/openvpn/openvpn" ] +then + echo "no (executable) openvpn binary in current build tree. FAIL." >&2 + exit 1 +fi + +if [ ! -w . ] +then + echo "current directory is not writable (required for logging). FAIL." >&2 + exit 1 +fi + +if [ -z "$CA_CERT" ] ; then + echo "CA_CERT not defined in 't_client.rc'. SKIP test." >&2 + exit 77 +fi + +if [ -z "$TEST_RUN_LIST" ] ; then + echo "TEST_RUN_LIST empty, no tests defined. SKIP test." >&2 + exit 77 +fi + +# Ensure PREFER_KSU is in a known state +PREFER_KSU="${PREFER_KSU:-0}" + +# make sure we have permissions to run ifconfig/route from OpenVPN +# can't use "id -u" here - doesn't work on Solaris +ID=`id` +if expr "$ID" : "uid=0" >/dev/null +then : +else + if [ "${PREFER_KSU}" -eq 1 ]; + then + # Check if we have a valid kerberos ticket + klist -l 1>/dev/null 2>/dev/null + if [ $? -ne 0 ]; + then + # No kerberos ticket found, skip ksu and fallback to RUN_SUDO + PREFER_KSU=0 + echo "$0: No Kerberos ticket available. Will not use ksu." + else + RUN_SUDO="ksu -q -e" + fi + fi + + if [ -z "$RUN_SUDO" ] + then + echo "$0: this test must run be as root, or RUN_SUDO=... " >&2 + echo " must be set correctly in 't_client.rc'. SKIP." >&2 + exit 77 + else + # We have to use sudo. Make sure that we (hopefully) do not have + # to ask the users password during the test. This is done to + # prevent timing issues, e.g. when the waits for openvpn to start + if $RUN_SUDO $KILL_EXEC -0 $$ + then + echo "$0: $RUN_SUDO $KILL_EXEC -0 succeeded, good." + else + echo "$0: $RUN_SUDO $KILL_EXEC -0 failed, cannot go on. SKIP." >&2 + exit 77 + fi + fi +fi + +LOGDIR=t_client-`hostname`-`date +%Y%m%d-%H%M%S` +if mkdir $LOGDIR +then : +else + echo "can't create log directory '$LOGDIR'. FAIL." >&2 + exit 1 +fi + +exit_code=0 + +# ---------------------------------------------------------- +# helper functions +# ---------------------------------------------------------- + +# print failure message, increase FAIL counter +fail() +{ + echo "" + echo "FAIL: $@" >&2 + fail_count=$(( $fail_count + 1 )) +} + +# print "all interface IP addresses" + "all routes" +# this is higly system dependent... +get_ifconfig_route() +{ + # linux / iproute2? (-> if configure got a path) + if [ -n "/usr/sbin/ip" ] + then + echo "-- linux iproute2 --" + /usr/sbin/ip addr show | grep -v valid_lft + /usr/sbin/ip route show + /usr/sbin/ip -o -6 route show | grep -v ' cache' | sed -E -e 's/ expires [0-9]*sec//' -e 's/ (mtu|hoplimit|cwnd|ssthresh) [0-9]+//g' -e 's/ (rtt|rttvar) [0-9]+ms//g' + return + fi + + # try uname + case `uname -s` in + Linux) + echo "-- linux / ifconfig --" + LANG=C /usr/sbin/ifconfig -a |egrep "( addr:|encap:)" + LANG=C netstat -rn -4 -6 + return + ;; + FreeBSD|NetBSD|Darwin) + echo "-- FreeBSD/NetBSD/Darwin [MacOS X] --" + /usr/sbin/ifconfig -a | egrep "(flags=|inet)" + netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$NF }' + return + ;; + OpenBSD) + echo "-- OpenBSD --" + /usr/sbin/ifconfig -a | egrep "(flags=|inet)" | \ + sed -e 's/pltime [0-9]*//' -e 's/vltime [0-9]*//' + netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$NF }' + return + ;; + SunOS) + echo "-- Solaris --" + /usr/sbin/ifconfig -a | egrep "(flags=|inet)" + netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$6 }' + return + ;; + AIX) + echo "-- AIX --" + /usr/sbin/ifconfig -a | egrep "(flags=|inet)" + netstat -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$6 }' + return + ;; + esac + + echo "get_ifconfig_route(): no idea how to get info on your OS. FAIL." >&2 + exit 20 +} + +# ---------------------------------------------------------- +# check ifconfig +# arg1: "4" or "6" -> for message +# arg2: IPv4/IPv6 address that must show up in out of "get_ifconfig_route" +check_ifconfig() +{ + proto=$1 ; shift + expect_list="$@" + + if [ -z "$expect_list" ] ; then return ; fi + + for expect in $expect_list + do + if get_ifconfig_route | fgrep "$expect" >/dev/null + then : + else + fail "check_ifconfig(): expected IPv$proto address '$expect' not found in ifconfig output." + fi + done +} + +# ---------------------------------------------------------- +# run pings +# arg1: "4" or "6" -> fping/fing6 +# arg2: "want_ok" or "want_fail" (expected ping result) +# arg3... -> fping arguments (host list) +run_ping_tests() +{ + proto=$1 ; want=$2 ; shift ; shift + targetlist="$@" + + # "no targets" is fine + if [ -z "$targetlist" ] ; then return ; fi + + case $proto in + 4) cmd=fping ;; + 6) cmd=fping6 ;; + *) echo "internal error in run_ping_tests arg 1: '$proto'" >&2 + exit 1 ;; + esac + + case $want in + want_ok) sizes_list="64 1440 3000" ;; + want_fail) sizes_list="64" ;; + esac + + for bytes in $sizes_list + do + echo "run IPv$proto ping tests ($want), $bytes byte packets..." + + echo "$cmd -b $bytes -C 20 -p 250 -q $FPING_EXTRA_ARGS $targetlist" >>$LOGDIR/$SUF:fping.out + $cmd -b $bytes -C 20 -p 250 -q $FPING_EXTRA_ARGS $targetlist >>$LOGDIR/$SUF:fping.out 2>&1 + + # while OpenVPN is running, pings must succeed (want='want_ok') + # before OpenVPN is up, pings must NOT succeed (want='want_fail') + + rc=$? + if [ $rc = 0 ] # all ping OK + then + if [ $want = "want_fail" ] # not what we want + then + fail "IPv$proto ping test succeeded, but needs to *fail*." + fi + else # ping failed + if [ $want = "want_ok" ] # not what we wanted + then + fail "IPv$proto ping test ($bytes bytes) failed, but should succeed." + fi + fi + done +} + +# ---------------------------------------------------------- +# main test loop +# ---------------------------------------------------------- +SUMMARY_OK= +SUMMARY_FAIL= + +for SUF in $TEST_RUN_LIST +do + # get config variables + eval test_prep=\"\$PREPARE_$SUF\" + eval test_postinit=\"\$POSTINIT_CMD_$SUF\" + eval test_cleanup=\"\$CLEANUP_$SUF\" + eval test_run_title=\"\$RUN_TITLE_$SUF\" + eval openvpn_conf=\"\$OPENVPN_CONF_$SUF\" + eval expect_ifconfig4=\"\$EXPECT_IFCONFIG4_$SUF\" + eval expect_ifconfig6=\"\$EXPECT_IFCONFIG6_$SUF\" + eval ping4_hosts=\"\$PING4_HOSTS_$SUF\" + eval ping6_hosts=\"\$PING6_HOSTS_$SUF\" + + # If EXCEPT_IFCONFIG* variables for this test are missing, run an --up + # script to generate them dynamically. + if [ -z "$expect_ifconfig4" ] || [ -z "$expect_ifconfig6" ]; then + up="--setenv TESTNUM $SUF --setenv TOP_BUILDDIR ${top_builddir} --script-security 2 --up ${srcdir}/update_t_client_ips.sh" + else + up="" + fi + + echo -e "\n### test run $SUF: '$test_run_title' ###\n" + fail_count=0 + + if [ -n "$test_prep" ]; then + echo -e "running preparation: '$test_prep'" + eval $test_prep + fi + + echo "save pre-openvpn ifconfig + route" + get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_pre.txt + + echo -e "\nrun pre-openvpn ping tests - targets must not be reachable..." + run_ping_tests 4 want_fail "$ping4_hosts" + run_ping_tests 6 want_fail "$ping6_hosts" + if [ "$fail_count" = 0 ] ; then + echo -e "OK.\n" + else + echo -e "FAIL: make sure that ping hosts are ONLY reachable via VPN, SKIP test $SUF". + SUMMARY_FAIL="$SUMMARY_FAIL $SUF" + exit_code=31 + continue + fi + + pidfile="${top_builddir}/tests/$LOGDIR/openvpn-$SUF.pid" + openvpn_conf="$openvpn_conf --writepid $pidfile $up" + echo " run openvpn $openvpn_conf" + echo "# src/openvpn/openvpn $openvpn_conf" >$LOGDIR/$SUF:openvpn.log + umask 022 + $RUN_SUDO "${top_builddir}/src/openvpn/openvpn" $openvpn_conf >>$LOGDIR/$SUF:openvpn.log & + sudopid=$! + + # Check if OpenVPN has initialized before continuing. It will check every 3rd second up + # to $ovpn_init_check times. + ovpn_init_check=10 + ovpn_init_success=0 + while [ $ovpn_init_check -gt 0 ]; + do + sleep 3 # Wait for OpenVPN to initialize and have had time to write the pid file + grep "Initialization Sequence Completed" $LOGDIR/$SUF:openvpn.log >/dev/null + if [ $? -eq 0 ]; then + ovpn_init_check=0 + ovpn_init_success=1 + fi + ovpn_init_check=$(( $ovpn_init_check - 1 )) + done + + opid=`cat $pidfile` + if [ -n "$opid" ]; then + echo " OpenVPN running with PID $opid" + else + echo " Could not read OpenVPN PID file" >&2 + fi + + # If OpenVPN did not start + if [ $ovpn_init_success -ne 1 -o -z "$opid" ]; then + echo "$0: OpenVPN did not initialize in a reasonable time" >&2 + if [ -n "$opid" ]; then + $RUN_SUDO $KILL_EXEC $opid + fi + $RUN_SUDO $KILL_EXEC $sudopid + echo "tail -5 $SUF:openvpn.log" >&2 + tail -5 $LOGDIR/$SUF:openvpn.log >&2 + echo -e "\nFAIL. skip rest of sub-tests for test run $SUF.\n" >&2 + trap - 0 1 2 3 15 + SUMMARY_FAIL="$SUMMARY_FAIL $SUF" + exit_code=30 + continue + fi + + # make sure openvpn client is terminated in case shell exits + trap "$RUN_SUDO $KILL_EXEC $opid" 0 + trap "$RUN_SUDO $KILL_EXEC $opid ; trap - 0 ; exit 1" 1 2 3 15 + + # compare whether anything changed in ifconfig/route setup? + echo "save ifconfig+route" + get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route.txt + + echo -n "compare pre-openvpn ifconfig+route with current values..." + if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \ + $LOGDIR/$SUF:ifconfig_route.txt >/dev/null + then + fail "no differences between ifconfig/route before OpenVPN start and now." + else + echo -e " OK!\n" + fi + + # post init script needed? + if [ -n "$test_postinit" ]; then + echo -e "running post-init cmd: '$test_postinit'" + eval $test_postinit + fi + + # expected ifconfig values in there? + check_ifconfig 4 "$expect_ifconfig4" + check_ifconfig 6 "$expect_ifconfig6" + + run_ping_tests 4 want_ok "$ping4_hosts" + run_ping_tests 6 want_ok "$ping6_hosts" + echo -e "ping tests done.\n" + + echo "stopping OpenVPN" + $RUN_SUDO $KILL_EXEC $opid + wait $! + rc=$? + if [ $rc != 0 ] ; then + fail "OpenVPN return code $rc, expect 0" + fi + + echo -e "\nsave post-openvpn ifconfig + route..." + get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_post.txt + + echo -n "compare pre- and post-openvpn ifconfig + route..." + if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \ + $LOGDIR/$SUF:ifconfig_route_post.txt >$LOGDIR/$SUF:ifconfig_route_diff.txt + then + echo -e " OK.\n" + else + cat $LOGDIR/$SUF:ifconfig_route_diff.txt >&2 + fail "differences between pre- and post-ifconfig/route" + fi + if [ "$fail_count" = 0 ] ; then + echo -e "test run $SUF: all tests OK.\n" + SUMMARY_OK="$SUMMARY_OK $SUF" + else + echo -e "test run $SUF: $fail_count test failures. FAIL.\n"; + SUMMARY_FAIL="$SUMMARY_FAIL $SUF" + exit_code=30 + fi + + if [ -n "$test_cleanup" ]; then + echo -e "cleaning up: '$test_cleanup'" + eval $test_cleanup + fi + +done + +if [ -z "$SUMMARY_OK" ] ; then SUMMARY_OK=" none"; fi +if [ -z "$SUMMARY_FAIL" ] ; then SUMMARY_FAIL=" none"; fi +echo "Test sets succeeded:$SUMMARY_OK." +echo "Test sets failed:$SUMMARY_FAIL." + +# remove trap handler +trap - 0 1 2 3 15 +exit $exit_code -- cgit v1.2.3