Generic Options --------------- This section covers generic options which are accessible regardless of which mode OpenVPN is configured as. --help Show options. --auth-nocache Don't cache ``--askpass`` or ``--auth-user-pass`` username/passwords in virtual memory. If specified, this directive will cause OpenVPN to immediately forget username/password inputs after they are used. As a result, when OpenVPN needs a username/password, it will prompt for input from stdin, which may be multiple times during the duration of an OpenVPN session. When using ``--auth-nocache`` in combination with a user/password file and ``--chroot`` or ``--daemon``, make sure to use an absolute path. This directive does not affect the ``--http-proxy`` username/password. It is always cached. --cd dir Change directory to ``dir`` prior to reading any files such as configuration files, key files, scripts, etc. ``dir`` should be an absolute path, with a leading "/", and without any references to the current directory such as :code:`.` or :code:`..`. This option is useful when you are running OpenVPN in ``--daemon`` mode, and you want to consolidate all of your OpenVPN control files in one location. --chroot dir Chroot to ``dir`` after initialization. ``--chroot`` essentially redefines ``dir`` as being the top level directory tree (/). OpenVPN will therefore be unable to access any files outside this tree. This can be desirable from a security standpoint. Since the chroot operation is delayed until after initialization, most OpenVPN options that reference files will operate in a pre-chroot context. In many cases, the ``dir`` parameter can point to an empty directory, however complications can result when scripts or restarts are executed after the chroot operation. Note: The SSL library will probably need /dev/urandom to be available inside the chroot directory ``dir``. This is because SSL libraries occasionally need to collect fresh random. Newer linux kernels and some BSDs implement a getrandom() or getentropy() syscall that removes the need for /dev/urandom to be available. --config file Load additional config options from ``file`` where each line corresponds to one command line option, but with the leading '--' removed. If ``--config file`` is the only option to the openvpn command, the ``--config`` can be removed, and the command can be given as ``openvpn file`` Note that configuration files can be nested to a reasonable depth. Double quotation or single quotation characters ("", '') can be used to enclose single parameters containing whitespace, and "#" or ";" characters in the first column can be used to denote comments. Note that OpenVPN 2.0 and higher performs backslash-based shell escaping for characters not in single quotations, so the following mappings should be observed: :: \\ Maps to a single backslash character (\). \" Pass a literal doublequote character ("), don't interpret it as enclosing a parameter. \[SPACE] Pass a literal space or tab character, don't interpret it as a parameter delimiter. For example on Windows, use double backslashes to represent pathnames: :: secret "c:\\OpenVPN\\secret.key" For examples of configuration files, see https://openvpn.net/community-resources/how-to/ Here is an example configuration file: :: # # Sample OpenVPN configuration file for # using a pre-shared static key. # # '#' or ';' may be used to delimit comments. # Use a dynamic tun device. dev tun # Our remote peer remote mypeer.mydomain # 10.1.0.1 is our local VPN endpoint # 10.1.0.2 is our remote VPN endpoint ifconfig 10.1.0.1 10.1.0.2 # Our pre-shared static key secret static.key --daemon progname Become a daemon after all initialization functions are completed. This option will cause all message and error output to be sent to the syslog file (such as :code:`/var/log/messages`), except for the output of scripts and ifconfig commands, which will go to :code:`/dev/null` unless otherwise redirected. The syslog redirection occurs immediately at the point that ``--daemon`` is parsed on the command line even though the daemonization point occurs later. If one of the ``--log`` options is present, it will supersede syslog redirection. The optional ``progname`` parameter will cause OpenVPN to report its program name to the system logger as ``progname``. This can be useful in linking OpenVPN messages in the syslog file with specific tunnels. When unspecified, ``progname`` defaults to "openvpn". When OpenVPN is run with the ``--daemon`` option, it will try to delay daemonization until the majority of initialization functions which are capable of generating fatal errors are complete. This means that initialization scripts can test the return status of the openvpn command for a fairly reliable indication of whether the command has correctly initialized and entered the packet forwarding event loop. In OpenVPN, the vast majority of errors which occur after initialization are non-fatal. Note: as soon as OpenVPN has daemonized, it can not ask for usernames, passwords, or key pass phrases anymore. This has certain consequences, namely that using a password-protected private key will fail unless the ``--askpass`` option is used to tell OpenVPN to ask for the pass phrase (this requirement is new in v2.3.7, and is a consequence of calling daemon() before initializing the crypto layer). Further, using ``--daemon`` together with ``--auth-user-pass`` (entered on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. --disable-occ Don't output a warning message if option inconsistencies are detected between peers. An example of an option inconsistency would be where one peer uses ``--dev tun`` while the other peer uses ``--dev tap``. Use of this option is discouraged, but is provided as a temporary fix in situations where a recent version of OpenVPN must connect to an old version. --engine engine-name Enable OpenSSL hardware-based crypto engine functionality. If ``engine-name`` is specified, use a specific crypto engine. Use the ``--show-engines`` standalone option to list the crypto engines which are supported by OpenSSL. --fast-io (Experimental) Optimize TUN/TAP/UDP I/O writes by avoiding a call to poll/epoll/select prior to the write operation. The purpose of such a call would normally be to block until the device or socket is ready to accept the write. Such blocking is unnecessary on some platforms which don't support write blocking on UDP sockets or TUN/TAP devices. In such cases, one can optimize the event loop by avoiding the poll/epoll/select call, improving CPU efficiency by 5% to 10%. This option can only be used on non-Windows systems, when ``--proto udp`` is specified, and when ``--shaper`` is NOT specified. --group group Similar to the ``--user`` option, this option changes the group ID of the OpenVPN process to ``group`` after initialization. --ignore-unknown-option args Valid syntax: :: ignore-unknown-options opt1 opt2 opt3 ... optN When one of options ``opt1 ... optN`` is encountered in the configuration file the configuration file parsing does not fail if this OpenVPN version does not support the option. Multiple ``--ignore-unknown-option`` options can be given to support a larger number of options to ignore. This option should be used with caution, as there are good security reasons for having OpenVPN fail if it detects problems in a config file. Having said that, there are valid reasons for wanting new software features to gracefully degrade when encountered by older software versions. ``--ignore-unknown-option`` is available since OpenVPN 2.3.3. --iproute cmd Set alternate command to execute instead of default ``iproute2`` command. May be used in order to execute OpenVPN in unprivileged environment. --keying-material-exporter args Save Exported Keying Material [RFC5705] of len bytes (must be between 16 and 4095 bytes) using ``label`` in environment (:code:`exported_keying_material`) for use by plugins in :code:`OPENVPN_PLUGIN_TLS_FINAL` callback. Valid syntax: :: keying-material-exporter label len Note that exporter ``labels`` have the potential to collide with existing PRF labels. In order to prevent this, labels *MUST* begin with :code:`EXPORTER`. --mlock Disable paging by calling the POSIX mlockall function. Requires that OpenVPN be initially run as root (though OpenVPN can subsequently downgrade its UID using the ``--user`` option). Using this option ensures that key material and tunnel data are never written to disk due to virtual memory paging operations which occur under most modern operating systems. It ensures that even if an attacker was able to crack the box running OpenVPN, he would not be able to scan the system swap file to recover previously used ephemeral keys, which are used for a period of time governed by the ``--reneg`` options (see below), then are discarded. The downside of using ``--mlock`` is that it will reduce the amount of physical memory available to other applications. --nice n Change process priority after initialization (``n`` greater than 0 is lower priority, ``n`` less than zero is higher priority). --persist-key Don't re-read key files across :code:`SIGUSR1` or ``--ping-restart``. This option can be combined with ``--user nobody`` to allow restarts triggered by the :code:`SIGUSR1` signal. Normally if you drop root privileges in OpenVPN, the daemon cannot be restarted since it will now be unable to re-read protected key files. This option solves the problem by persisting keys across :code:`SIGUSR1` resets, so they don't need to be re-read. --remap-usr1 signal Control whether internally or externally generated :code:`SIGUSR1` signals are remapped to :code:`SIGHUP` (restart without persisting state) or SIGTERM (exit). ``signal`` can be set to :code:`SIGHUP` or :code:`SIGTERM`. By default, no remapping occurs. --script-security level This directive offers policy-level control over OpenVPN's usage of external programs and scripts. Lower ``level`` values are more restrictive, higher values are more permissive. Settings for ``level``: :code:`0` Strictly no calling of external programs. :code:`1` (Default) Only call built-in executables such as ifconfig, ip, route, or netsh. :code:`2` Allow calling of built-in executables and user-defined scripts. :code:`3` Allow passwords to be passed to scripts via environmental variables (potentially unsafe). OpenVPN releases before v2.3 also supported a ``method`` flag which indicated how OpenVPN should call external commands and scripts. This could be either :code:`execve` or :code:`system`. As of OpenVPN 2.3, this flag is no longer accepted. In most \*nix environments the execve() approach has been used without any issues. Some directives such as ``--up`` allow options to be passed to the external script. In these cases make sure the script name does not contain any spaces or the configuration parser will choke because it can't determine where the script name ends and script options start. To run scripts in Windows in earlier OpenVPN versions you needed to either add a full path to the script interpreter which can parse the script or use the ``system`` flag to run these scripts. As of OpenVPN 2.3 it is now a strict requirement to have full path to the script interpreter when running non-executables files. This is not needed for executable files, such as .exe, .com, .bat or .cmd files. For example, if you have a Visual Basic script, you must use this syntax now: :: --up 'C:\\Windows\\System32\\wscript.exe C:\\Program\ Files\\OpenVPN\\config\\my-up-script.vbs' Please note the single quote marks and the escaping of the backslashes (\\) and the space character. The reason the support for the :code:`system` flag was removed is due to the security implications with shell expansions when executing scripts via the :code:`system()` call. --setcon context Apply SELinux ``context`` after initialization. This essentially provides the ability to restrict OpenVPN's rights to only network I/O operations, thanks to SELinux. This goes further than ``--user`` and ``--chroot`` in that those two, while being great security features, unfortunately do not protect against privilege escalation by exploitation of a vulnerable system call. You can of course combine all three, but please note that since setcon requires access to /proc you will have to provide it inside the chroot directory (e.g. with mount --bind). Since the setcon operation is delayed until after initialization, OpenVPN can be restricted to just network-related system calls, whereas by applying the context before startup (such as the OpenVPN one provided in the SELinux Reference Policies) you will have to allow many things required only during initialization. Like with chroot, complications can result when scripts or restarts are executed after the setcon operation, which is why you should really consider using the ``--persist-key`` and ``--persist-tun`` options. --status args Write operational status to ``file`` every ``n`` seconds. Valid syntaxes: :: status file status file n Status can also be written to the syslog by sending a :code:`SIGUSR2` signal. With multi-client capability enabled on a server, the status file includes a list of clients and a routing table. The output format can be controlled by the ``--status-version`` option in that case. For clients or instances running in point-to-point mode, it will contain the traffic statistics. --status-version n Set the status file format version number to ``n``. This only affects the status file on servers with multi-client capability enabled. Valid status version values: :code:`1` Traditional format (default). The client list contains the following fields comma-separated: Common Name, Real Address, Bytes Received, Bytes Sent, Connected Since. :code:`2` A more reliable format for external processing. Compared to version :code:`1`, the client list contains some additional fields: Virtual Address, Virtual IPv6 Address, Username, Client ID, Peer ID, Data Channel Cipher. Future versions may extend the number of fields. :code:`3` Identical to :code:`2`, but fields are tab-separated. --test-crypto Do a self-test of OpenVPN's crypto options by encrypting and decrypting test packets using the data channel encryption options specified above. This option does not require a peer to function, and therefore can be specified without ``--dev`` or ``--remote``. The typical usage of ``--test-crypto`` would be something like this: :: openvpn --test-crypto --secret key or :: openvpn --test-crypto --secret key --verb 9 This option is very useful to test OpenVPN after it has been ported to a new platform, or to isolate problems in the compiler, OpenSSL crypto library, or OpenVPN's crypto code. Since it is a self-test mode, problems with encryption and authentication can be debugged independently of network and tunnel issues. --tmp-dir dir Specify a directory ``dir`` for temporary files. This directory will be used by openvpn processes and script to communicate temporary data with openvpn main process. Note that the directory must be writable by the OpenVPN process after it has dropped it's root privileges. This directory will be used by in the following cases: * ``--client-connect`` scripts and :code:`OPENVPN_PLUGIN_CLIENT_CONNECT` plug-in hook to dynamically generate client-specific configuration :code:`client_connect_config_file` and return success/failure via :code:`client_connect_deferred_file` when using deferred client connect method * :code:`OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY` plug-in hooks returns success/failure via :code:`auth_control_file` when using deferred auth method * :code:`OPENVPN_PLUGIN_ENABLE_PF` plugin hook to pass filtering rules via ``pf_file`` --use-prediction-resistance Enable prediction resistance on mbed TLS's RNG. Enabling prediction resistance causes the RNG to reseed in each call for random. Reseeding this often can quickly deplete the kernel entropy pool. If you need this option, please consider running a daemon that adds entropy to the kernel pool. --user user Change the user ID of the OpenVPN process to ``user`` after initialization, dropping privileges in the process. This option is useful to protect the system in the event that some hostile party was able to gain control of an OpenVPN session. Though OpenVPN's security features make this unlikely, it is provided as a second line of defense. By setting ``user`` to :code:`nobody` or somebody similarly unprivileged, the hostile party would be limited in what damage they could cause. Of course once you take away privileges, you cannot return them to an OpenVPN session. This means, for example, that if you want to reset an OpenVPN daemon with a :code:`SIGUSR1` signal (for example in response to a DHCP reset), you should make use of one or more of the ``--persist`` options to ensure that OpenVPN doesn't need to execute any privileged operations in order to restart (such as re-reading key files or running ``ifconfig`` on the TUN device). --writepid file Write OpenVPN's main process ID to ``file``.