path: root/Changes.rst

Overview of changes in 2.4
==========================


New features
------------
Seamless client IP/port floating
    Added new packet format P_DATA_V2, which includes peer-id. If both the
    server and client support it, the client sends all data packets in
    the new format. When a data packet arrives, the server identifies peer
    by peer-id. If peer's ip/port has changed, server assumes that
    client has floated, verifies HMAC and updates ip/port in internal structs.
    This allows the connection to be immediatly restored, instead of requiring
    a TLS handshake before the server accepts packets from the new client
    ip/port.

Data channel cipher negotiation
    Data channel ciphers (``--cipher``) are now by default negotiated.  If a
    client advertises support for Negotiable Crypto Parameters (NCP), the
    server will choose a cipher (by default AES-256-GCM) for the data channel,
    and tell the client to use that cipher.  Data channel cipher negotiation
    can be controlled using ``--ncp-ciphers`` and ``--ncp-disable``.

    A more limited version also works in client-to-server and server-to-client
    scenarios where one of the end points uses a v2.4 client or server and the
    other side uses an older version.  In such scenarios the v2.4 side will
    change to the ``--cipher`` set by the remote side, if permitted by by
    ``--ncp-ciphers``.  For example, a v2.4 client with ``--cipher BF-CBC``
    and ``ncp-ciphers AES-256-GCM:AES-256-CBC`` can connect to both a v2.3
    server with ``cipher BF-CBC`` as well as a server with
    ``cipher AES-256-CBC`` in its config.  The other way around, a v2.3 client
    with either ``cipher BF-CBC`` or ``cipher AES-256-CBC`` can connect to a
    v2.4 server with e.g. ``cipher BF-CBC`` and
    ``ncp-ciphers AES-256-GCM:AES-256-CBC`` in its config.  For this to work
    it requires that OpenVPN was built without disabling OCC support.

AEAD (GCM) data channel cipher support
    The data channel now supports AEAD ciphers (currently only GCM).  The AEAD
    packet format has a smaller crypto overhead than the CBC packet format,
    (e.g. 20 bytes per packet for AES-128-GCM instead of 36 bytes per packet
    for AES-128-CBC + HMAC-SHA1).

ECDH key exchange
    The TLS control channel now supports for elliptic curve diffie-hellmann
    key exchange (ECDH).

Improved Certificate Revocation List (CRL) processing
    CRLs are now handled by the crypto library (OpenSSL or mbed TLS), instead
    of inside OpenVPN itself.  The crypto library implementations are more
    strict than the OpenVPN implementation was.  This might reject peer
    certificates that would previously be accepted.  If this occurs, OpenVPN
    will log the crypto library's error description.

Dualstack round-robin DNS client connect
    Instead of only using the first address of each ``--remote`` OpenVPN
    will now try all addresses (IPv6 and IPv4) of a ``--remote`` entry.

Support for providing IPv6 DNS servers
    A new DHCP sub-option ``DNS6`` is added alongside with the already existing
    ``DNS`` sub-option.  This is used to provide DNS resolvers available over
    IPv6.  This may be pushed to clients where `` --up`` scripts and ``--plugin``
    can act upon it through the ``foreign_option_<n>`` environment variables.

    Support for the Windows client picking up this new sub-option is added,
    however IPv6 DNS resolvers need to be configured via ``netsh`` which requires
    administrator privileges unless the new interactive services on Windows is
    being used.  If the interactive service is used, this service will execute
    ``netsh`` in the background with the proper privileges.

New improved Windows Background service
    The new OpenVPNService is based on openvpnserv2, a complete rewrite of the OpenVPN
    service wrapper. It is intended for launching OpenVPN instances that should be
    up at all times, instead of being manually launched by a user. OpenVPNService is
    able to restart individual OpenVPN processes if they crash, and it also works
    properly on recent Windows versions. OpenVPNServiceLegacy tends to work poorly,
    if at all, on newer Windows versions (8+) and its use is not recommended.

New interactive Windows service
    The installer starts OpenVPNServiceInteractive automatically and configures
    it to start	at system startup.

    The interactive Windows service allows unprivileged users to start
    OpenVPN connections in the global config directory (usually
    C:\\Program Files\\OpenVPN\\config) using OpenVPN GUI without any
    extra configuration.

    Users who belong to the built-in Administrator group or to the
    local "OpenVPN Administrator" group can also store configuration
    files under %USERPROFILE%\\OpenVPN\\config for use with the
    interactive service.

redirect-gateway ipv6
    OpenVPN has now feature parity between IPv4 and IPv6 for redirect
    gateway including the handling of overlapping IPv6 routes with
    IPv6 remote VPN server address.

LZ4 Compression and pushable compression
    Additionally to LZO compression OpenVPN now also supports LZ4 compression.
    Compression options are now pushable from the server.

Filter pulled options client-side: pull-filter
    New option to explicitly allow or reject options pushed by the server.
    May be used multiple times and is applied in the order specified.

Per-client remove push options: push-remove
    New option to remove options on a per-client basis from the "push" list
    (more fine-grained than ``--push-reset``).

Http proxy password inside config file
    Http proxy passwords can be specified with the inline file option
    ``<http-proxy-user-pass>`` .. ``</http-proxy-user-pass>``

Windows version detection
    Windows version is detected, logged and possibly signalled to server
    (IV_PLAT_VER=<nn> if ``--push-peer-info`` is set on client).

Authentication tokens
    In situations where it is not suitable to save user passwords on the client,
    OpenVPN has support for pushing a --auth-token since v2.3.  This option is
    pushed from the server to the client with a token value to be used instead
    of the users password.  For this to work, the authentication plug-in would
    need to implement this support as well.  In OpenVPN 2.4 --auth-gen-token
    is introduced, which will allow the OpenVPN server to generate a random
    token and push it to the client without any changes to the authentication
    modules.  When the clients need to re-authenticate the OpenVPN server will
    do the authentication internally, instead of sending the re-authentication
    request to the authentication module .  This feature is especially
    useful in configurations which use One Time Password (OTP) authentication
    schemes, as this allows the tunnel keys to be renegotiated regularly without
    any need to supply new OTP codes.

keying-material-exporter
    Keying Material Exporter [RFC-5705] allow additional keying material to be
    derived from existing TLS channel.

Android platform support
    Support for running on Android using Android's VPNService API has been added.
    See doc/android.txt for more details. This support is primarily used in
    the OpenVPN for Android app (https://github.com/schwabe/ics-openvpn)

AIX platform support
    AIX platform support has been added. The support only includes tap
    devices since AIX does not provide tun interface.

Control channel encryption (``--tls-crypt``)
    Use a pre-shared static key (like the ``--tls-auth`` key) to encrypt control
    channel packets.  Provides more privacy, some obfuscation and poor-man's
    post-quantum security.

Asynchronous push reply
    Plug-ins providing support for deferred authentication can benefit from a more
    responsive authentication where the server sends PUSH_REPLY immediately once
    the authentication result is ready, instead of waiting for the the client to
    to send PUSH_REQUEST once more.  This requires OpenVPN to be built with
    ``./configure --enable-async-push``.  This is a compile-time only switch.


Deprecated features
-------------------
For an up-to-date list of all deprecated options, see this wiki page:
https://community.openvpn.net/openvpn/wiki/DeprecatedOptions

- ``--key-method 1`` is deprecated in OpenVPN 2.4 and will be removed in v2.5.
  Migrate away from ``--key-method 1`` as soon as possible.  The recommended
  approach is to remove the ``--key-method`` option from the configuration
  files, OpenVPN will then use ``--key-method 2`` by default.  Note that this
  requires changing the option in both the client and server side configs.

- ``--tls-remote`` is removed in OpenVPN 2.4, as indicated in the v2.3
  man-pages.  Similar functionality is provided via ``--verify-x509-name``,
  which does the same job in a better way.

- ``--compat-names`` and ``--no-name-remapping`` were deprecated in OpenVPN 2.3
  and will be removed in v2.5.  All scripts and plug-ins depending on the old
  non-standard X.509 subject formatting must be updated to the standardized
  formatting.  See the man page for more information.

- ``--no-iv`` is deprecated in OpenVPN 2.4 and will be removed in v2.5.

- ``--keysize`` is deprecated in OpenVPN 2.4 and will be removed in v2.6
  together with the support of ciphers with cipher block size less than
  128-bits.

- ``--comp-lzo`` is deprecated in OpenVPN 2.4.  Use ``--compress`` instead.

- ``--ifconfig-pool-linear`` has been deprecated since OpenVPN 2.1 and will be
  removed in v2.5.  Use ``--topology p2p`` instead.

- ``--client-cert-not-required`` is deprecated in OpenVPN 2.4 and will be removed
  in v2.5.  Use ``--verify-client-cert none`` for a functional equivalent.

- ``--ns-cert-type`` is deprecated in OpenVPN 2.3.18 and v2.4.  It will be removed
  in v2.5.  Use the far better ``--remote-cert-tls`` option which replaces this
  feature.


User-visible Changes
--------------------
- When using ciphers with cipher blocks less than 128-bits,
  OpenVPN will complain loudly if the configuration uses ciphers considered
  weak, such as the SWEET32 attack vector.  In such scenarios, OpenVPN will by
  default renegotiate for each 64MB of transported data (``--reneg-bytes``).
  This renegotiation can be disabled, but is HIGHLY DISCOURAGED.

- For certificate DNs with duplicate fields, e.g. "OU=one,OU=two", both fields
  are now exported to the environment, where each second and later occurrence
  of a field get _$N appended to it's field name, starting at N=1.  For the
  example above, that would result in e.g. X509_0_OU=one, X509_0_OU_1=two.
  Note that this breaks setups that rely on the fact that OpenVPN would
  previously (incorrectly) only export the last occurence of a field.

- ``proto udp`` and ``proto tcp`` now use both IPv4 and IPv6. The new
  options ``proto udp4`` and ``proto tcp4`` use IPv4 only.

- ``--sndbuf`` and ``--recvbuf`` default now to OS defaults instead of 64k

- OpenVPN exits with an error if an option has extra parameters;
  previously they were silently ignored

- ``--tls-auth`` always requires OpenVPN static key files and will no
  longer work with free form files

- ``--proto udp6/tcp6`` in server mode will now try to always listen to
  both IPv4 and IPv6 on platforms that allow it. Use ``--bind ipv6only``
  to explicitly listen only on IPv6.

- Removed ``--enable-password-save`` from configure. This option is now
  always enabled.

- Stricter default TLS cipher list (override with ``--tls-cipher``), that now
  also disables:

  * Non-ephemeral key exchange using static (EC)DH keys
  * DSS private keys

- mbed TLS builds: changed the tls_digest_N values exported to the script
  environment to be equal to the ones exported by OpenSSL builds, namely
  the certificate fingerprint (was the hash of the 'to be signed' data).

- mbed TLS builds: minimum RSA key size is now 2048 bits.  Shorter keys will
  not be accepted, both local and from the peer.

- ``--connect-timeout`` now specifies the timeout until the first TLS packet
  is received (identical to ``--server-poll-timeout``) and this timeout now
  includes the removed socks proxy timeout and http proxy timeout.

  In ``--static`` mode ``connect-timeout`` specifies the timeout for TCP and
  proxy connection establishment

- ``--connect-retry-max`` now specifies the maximum number of unsuccessful
  attempts of each remote/connection entry before exiting.

- ``--http-proxy-timeout`` and the static non-changeable socks timeout (5s)
  have been folded into a "unified" ``--connect-timeout`` which covers all
  steps needed to connect to the server, up to the start of the TLS exchange.
  The default value has been raised to 120s, to handle slow http/socks
  proxies graciously.  The old "fail TCP fast" behaviour can be achieved by
  adding "``--connect-timeout 10``" to the client config.

- ``--http-proxy-retry`` and ``--sock-proxy-retry`` have been removed. Proxy connections
  will now behave like regular connection entries and generate a USR1 on failure.

- ``--connect-retry`` gets an optional second argument that specifies the maximum
  time in seconds to wait between reconnection attempts when an exponential
  backoff is triggered due to repeated retries. Default = 300 seconds.

- Data channel cipher negotiation (see New features section) can override
  ciphers configured in the config file.  Use ``--ncp-disable`` if you do not want
  this behavior.

- All tun devices on all platforms are always considered to be IPv6
  capable. The ``--tun-ipv6`` option is ignored (behaves like it is always
  on).

- On the client side recursively routed packets, which have the same destination
  as the VPN server, are dropped. This can be disabled with
  --allow-recursive-routing option.

- On Windows, when the ``--register-dns`` option is set, OpenVPN no longer
  restarts the ``dnscache`` service - this had unwanted side effects, and
  seems to be no longer necessary with currently supported Windows versions.

- If no flags are given, and the interactive Windows service is used, "def1"
  is implicitly set (because "delete and later reinstall the existing
  default route" does not work well here).  If not using the service,
  the old behaviour is kept.

- OpenVPN now reloads a CRL only if the modication time or file size has
  changed, instead of for each new connection.  This reduces the connection
  setup time, in particular when using large CRLs.

- OpenVPN now ships with more up-to-date systemd unit files which take advantage
  of the improved service management as well as some hardening steps.  The
  configuration files are picked up from the /etc/openvpn/server/ and
  /etc/openvpn/client/ directories (depending on unit file).  This also avoids
  these new unit files and how they work to collide with older pre-existing
  unit files.

- Using ``--no-iv`` (which is generally not a recommended setup) will
  require explicitly disabling NCP with ``--disable-ncp``.  This is
  intentional because NCP will by default use AES-GCM, which requires
  an IV - so we want users of that option to consciously reconsider.


Maintainer-visible changes
--------------------------
- OpenVPN no longer supports building with crypto support, but without TLS
  support.  As a consequence, OPENSSL_CRYPTO_{CFLAGS,LIBS} and
  OPENSSL_SSL_{CFLAGS,LIBS} have been merged into OPENSSL_{CFLAGS,LIBS}.  This
  is particularly relevant for maintainers who build their own OpenSSL library,
  e.g. when cross-compiling.

- Linux distributions using systemd is highly encouraged to ship these new unit
  files instead of older ones, to provide a unified behaviour across systemd
  based Linux distributions.

- With OpenVPN 2.4, the project has moved over to depend on and actively use
  the official C99 standard (-std=c99).  This may fail on some older compiler/libc
  header combinations.  In most of these situations it is recommended to
  use -std=gnu99 in CFLAGS.  This is known to be needed when doing
  i386/i686 builds on RHEL5.


Version 2.4.8
=============
This is primarily a maintenance release with minor bugfixes and improvements.

New features
------------
- Support compiling with OpenSSL 1.1 without deprecated APIs

- handle PSS padding in cryptoapicert (necessary for TLS >= 1.2)


User visible changes
--------------------
- do not abort when hitting the combination of "--pull-filter" and
  "--mode server" (this got hit when starting OpenVPN servers using
  the windows GUI which installs a pull-filter to force ip-win32)

- increase listen() backlog queue to 32  (improve response behaviour
  on openvpn servers using TCP that get portscanned)

- fix and enhance documentation (INSTALL, man page, ...)


Bug fixes
---------
- the combination "IPv6 and proto UDP and SOCKS proxy" did not work - as
  a workaround, force IPv4 in this case until a full implementation for
  IPv6-UDP-SOCKS can be made.

- fix IPv6 routes on tap interfaces on OpenSolaris/OpenIndiana

- fix building with LibreSSL

- do not set pkcs11-helper 'safe fork mode' (should fix PIN querying in
  systemd environments)

- repair windows builds

- repair Darwin builds (remove -no-cpp-precomp flag)



Version 2.4.7
=============
This is primarily a maintenance release with minor bugfixes and improvements.

New features
------------
- ifconfig-ipv6(-push): allow using hostnames (in place of IPv6 addresses)

- new option: --ciphersuites to select TLS 1.3 cipher suites
  (--cipher selects TLS 1.2 and earlier ciphers)

- enable dhcp on tap adapter using interactive service
  (previously this required a privileged netsh.exe call from OpenVPN)

- clarify and expand management interface documentation

- add Interactive Service developer documentation


User visible changes
--------------------
- add message explaining early TLS client hello failure (if TLS 1.0
  only clients try to connect to TLS 1.3 capable servers)

- --show-tls will now display TLS 1.3 and TLS 1.2 ciphers in separate
  lists (if built with OpenSSL 1.1.1+)

- don't print OCC warnings about 'key-method', 'keydir' and 'tls-auth'
  (unnecessary warnings, and will cause spurious warnings with tls-crypt-v2)

- bump version of openvpn plugin argument structs to 5

- plugin: Export base64 encode and decode functions

- man: add security considerations to --compress section


Bug fixes
---------
- print port numbers (again) for incoming IPv4 connections received on
  a dual-stacked IPv6 socket.  This got lost at some point during 
  rewrite of the dual-stack code and proper printing of IPv4 addresses.

- fallback to password authentication when auth-token fails

- fix combination of --dev tap and --topology subnet across multiple 
  platforms (BSDs, MacOS, and Solaris).

- fix Windows CryptoAPI usage for TLS 1.2 signatures

- fix option handling in combination with NCP negotiation and OCC
  (--opt-verify failure on reconnect if NCP modified options and server
  verified "original" vs. "modified" options)

- mbedtls: print warning if random personalisation fails

- fix subnet topology on NetBSD (2.4).



Version 2.4.6
=============
This is primarily a maintenance release with minor bugfixes and improvements,
and one security relevant fix for the Windows Interactive Service.

User visible changes
--------------------
- warn if the management interface is configured with a TCP port and
  no password is set (because it might be possible to interfere with
  OpenVPN operation by tricking other programs into connecting to the
  management interface and inject unwanted commands)

Bug fixes
---------
- CVE-2018-9336: fix potential double-free() in the Interactive Service
  (Windows) on malformed input.

- avoid possible integer overflow in wakeup computation (trac #922)

- improve handling of incoming packet bursts for control channel data

- fix compilation with older OpenSSL versions that were broken in 2.4.5

- Windows + interactive Service: delete the IPv6 route to the "connected"
  network on tun close


Version 2.4.5
=============
This is primarily a maintenance release, with further improved OpenSSL 1.1
integration, several minor bug fixes and other minor improvements.


New features
------------
- The new option ``--tls-cert-profile`` can be used to restrict the set of
  allowed crypto algorithms in TLS certificates in mbed TLS builds.  The
  default profile is 'legacy' for now, which allows SHA1+, RSA-1024+ and any
  elliptic curve certificates.  The default will be changed to the 'preferred'
  profile in the future, which requires SHA2+, RSA-2048+ and any curve.

- make CryptoAPI support (Windows) compatible with OpenSSL 1.1 builds

- TLS v1.2 support for cryptoapicert (on Windows) -- RSA only

- openvpnserv: Add support for multi-instances (to support multiple
  parallel OpenVPN installations, like EduVPN and regular OpenVPN)

- Use P_DATA_V2 for server->client packets too (better packet alignment)

- improve management interface documentation

- rework registry key handling for OpenVPN service, notably making most
  registry values optional, falling back to reasonable defaults

- accept IPv6 address for pushed "dhcp-option DNS ..."
  (make OpenVPN 2 option compatible with OpenVPN 3 iOS and Android clients)


Bug fixes
---------
- Fix --tls-version-min and --tls-version-max for OpenSSL 1.1+

- Fix lots of compiler warnings (format string, type casts, ...)

- Fix --redirect-gateway route installation on Windows systems that have
  multiple interfaces into the same network (e.g. Wifi and wired LAN).

- Fix IPv6 interface route cleanup on Windows

- reload HTTP proxy credentials when moving to the next connection profile

- Fix build with LibreSSL (multiple times)

- Remove non-useful warning on pushed tun-ipv6 option.

- fix building with MSVC due to incompatible C constructs

- autoconf: Fix engine checks for openssl 1.1

- lz4: Rebase compat-lz4 against upstream v1.7.5

- lz4: Fix broken builds when pkg-config is not present but system library is

- Fix '--bind ipv6only'

- Allow learning iroutes with network made up of all 0s


Version 2.4.4
=============
This is primarily a maintenance release, with further improved OpenSSL 1.1
integration, several minor bug fixes and other minor improvements.

Bug fixes
---------
- Fix issues when a pushed cipher via the Negotiable Crypto Parameters (NCP) is
  rejected by the remote side

- Ignore ``--keysize`` when NCP have resulted in a changed cipher.

- Configurations using ``--auth-nocache`` and the management interface to provide
  user credentials (like NetworkManager on Linux) on client side with servers
  implementing authentication tokens (for example, using ``--auth-gen-token``)
  will now behave correctly and not query the user for an, to them, unknown
  authentication token on renegotiations of the tunnel.

- Fix bug causing invalid or corrupt SOCKS port number when changing the
  proxy via the management interface.

- The man page should now have proper escaping of hyphens/minus characters
  and have seen some minor corrections.

User-visible Changes
--------------------
- Linux servers with systemd which uses the ``openvpn-server@.service`` unit
  file for server configurations will now utilize the automatic restart feature
  in systemd.  If the OpenVPN server process dies unexpectedly, systemd will
  ensure the OpenVPN configuration will be restarted without any user interaction.

Deprecated features
-------------------
- ``--no-replay`` is deprecated and will be removed in OpenVPN 2.5.
- ``--keysize`` is deprecated in OpenVPN 2.4 and will be removed in v2.6

Security
--------
- CVE-2017-12166: Fix bounds check for configurations using ``--key-method 1``.
  Before this fix, it could allow an attacker to send a malformed packet to
  trigger a stack overflow.  This is considered to be a low risk issue, as
  ``--key-method 2`` has been the default since OpenVPN 2.0 (released on
  2005-04-17).  This option is already deprecated in v2.4 and will be
  completely removed in v2.5.


Version 2.4.3
=============

New features
------------
- Support building with OpenSSL 1.1 now (in addition to older versions)

- On Win10, set low interface metric for TAP adapter when block-outside-dns
  is in use, to make Windows prefer the TAP adapter for DNS queries
  (avoiding large delays)


Security
--------
- CVE-2017-7522: Fix ``--x509-track`` post-authentication remote DoS
  A client could crash a v2.4+ mbedtls server, if that server uses the
  ``--x509-track`` option and the client has a correct, signed and unrevoked
  certificate that contains an embedded NUL in the certificate subject.
  Discovered and reported to the OpenVPN security team by Guido Vranken.

- CVE-2017-7521: Fix post-authentication remote-triggerable memory leaks
  A client could cause a server to leak a few bytes each time it connects to the
  server.  That can eventuall cause the server to run out of memory, and thereby
  causing the server process to terminate. Discovered and reported to the
  OpenVPN security team by Guido Vranken.  (OpenSSL builds only.)

- CVE-2017-7521: Fix a potential post-authentication remote code execution
  attack on servers that use the ``--x509-username-field`` option with an X.509
  extension field (option argument prefixed with ``ext:``).  A client that can
  cause a server to run out-of-memory (see above) might be able to cause the
  server to double free, which in turn might lead to remote code execution.
  Discovered and reported to the OpenVPN security team by Guido Vranken.
  (OpenSSL builds only.)

- CVE-2017-7520: Pre-authentication remote crash/information disclosure for
  clients. If clients use a HTTP proxy with NTLM authentication (i.e.
  ``--http-proxy <server> <port> [<authfile>|'auto'|'auto-nct'] ntlm2``),
  a man-in-the-middle attacker between the client and the proxy can cause
  the client to crash or disclose at most 96 bytes of stack memory. The
  disclosed stack memory is likely to contain the proxy password. If the
  proxy password is not reused, this is unlikely to compromise the security
  of the OpenVPN tunnel itself.  Clients who do not use the ``--http-proxy``
  option with ntlm2 authentication are not affected.

- CVE-2017-7508: Fix remotely-triggerable ASSERT() on malformed IPv6 packet.
  This can be used to remotely shutdown an openvpn server or client, if
  IPv6 and ``--mssfix`` are enabled and the IPv6 networks used inside the VPN
  are known.

- Fix null-pointer dereference when talking to a malicious http proxy
  that returns a malformed Proxy-Authenticate: headers for digest auth.

- Fix overflow check for long ``--tls-cipher`` option

- Windows: Pass correct buffer size to ``GetModuleFileNameW()``
  (OSTIF/Quarkslabs audit, finding 5.6)


User-visible Changes
--------------------
- ``--verify-hash`` can now take an optional flag which changes the hashing
  algorithm. It can be either SHA1 or SHA256.  The default if not provided is
  SHA1 to preserve backwards compatibility with existing configurations.

- Restrict the supported ``--x509-username-field`` extension fields to subjectAltName
  and issuerAltName.  Other extensions probably didn't work anyway, and would
  cause OpenVPN to crash when a client connects.


Bugfixes
--------
- Fix fingerprint calculation in mbed TLS builds.  This means that mbed TLS users
  of OpenVPN 2.4.0, v2.4.1 and v2.4.2 that rely on the values of the
  ``tls_digest_*`` env vars, or that use ``--verify-hash`` will have to change
  the fingerprint values they check against.  The security impact of the
  incorrect calculation is very minimal; the last few bytes (max 4, typically
  4) are not verified by the fingerprint.  We expect no real-world impact,
  because users that used this feature before will notice that it has suddenly
  stopped working, and users that didn't will notice that connection setup
  fails if they specify correct fingerprints.

- Fix edge case with NCP when the server sends an empty PUSH_REPLY message
  back, and the client would not initialize it's data channel crypto layer
  properly (trac #903)

- Fix SIGSEGV on unaligned buffer access on OpenBSD/Sparc64

- Fix TCP_NODELAY on OpenBSD

- Remove erroneous limitation on max number of args for --plugin

- Fix NCP behaviour on TLS reconnect (Server would not send a proper
  "cipher ..." message back to the client, leading to client and server
  using different ciphers) (trac #887)


Version 2.4.2
=============

Bugfixes
--------
- Fix memory leak introduced in OpenVPN 2.4.1: if ``--remote-cert-tls`` is
  used, we leaked some memory on each TLS (re)negotiation.


Security
--------
- Fix a pre-authentication denial-of-service attack on both clients and
  servers.  By sending a too-large control packet, OpenVPN 2.4.0 or v2.4.1 can
  be forced to hit an ASSERT() and stop the process.  If ``--tls-auth`` or
  ``--tls-crypt`` is used, only attackers that have the ``--tls-auth`` or
  ``--tls-crypt`` key can mount an attack.
  (OSTIF/Quarkslab audit finding 5.1, CVE-2017-7478)

- Fix an authenticated remote DoS vulnerability that could be triggered by
  causing a packet id roll over.  An attack is rather inefficient; a peer
  would need to get us to send at least about 196 GB of data.
  (OSTIF/Quarkslab audit finding 5.2, CVE-2017-7479)


Version 2.4.1
=============
- ``--remote-cert-ku`` now only requires the certificate to have at least the
  bits set of one of the values in the supplied list, instead of requiring an
  exact match to one of the values in the list.

- ``--remote-cert-tls`` now only requires that a keyUsage is present in the
  certificate, and leaves the verification of the value up to the crypto
  library, which has more information (i.e. the key exchange method in use)
  to verify that the keyUsage is correct.

- ``--ns-cert-type`` is deprecated.  Use ``--remote-cert-tls`` instead.
  The nsCertType x509 extension is very old, and barely used.
  ``--remote-cert-tls`` uses the far more common keyUsage and extendedKeyUsage
  extension instead.  Make sure your certificates carry these to be able to
  use ``--remote-cert-tls``.