summaryrefslogtreecommitdiff
path: root/Makefile.in
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2019-07-31 16:59:49 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2019-07-31 16:59:49 +0200
commit1687222e1b9e74c89cafbb5910e72d8ec7bfd40f (patch)
treed78102ce30207c63e7608eeba743efd680c888dc /Makefile.in
parent58912f68c2489bcee787599837447e0d64dfd61a (diff)
New upstream version 1.0.28upstream/1.0.28
Diffstat (limited to 'Makefile.in')
-rw-r--r--Makefile.in1023
1 files changed, 0 insertions, 1023 deletions
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 204f510..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,1023 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
- $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(top_srcdir)/include/sane/config.h.in mkinstalldirs ABOUT-NLS \
- $(dist_doc_DATA) COPYING ar-lib compile config.guess \
- config.rpath config.sub depcomp install-sh missing ltmain.sh
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
- $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
- $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
- $(top_srcdir)/acinclude.m4 $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/byteorder.m4 $(top_srcdir)/m4/stdint.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/include/sane/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(docdir)"
-DATA = $(dist_doc_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- if test -d "$(distdir)"; then \
- find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -rf "$(distdir)" \
- || { sleep 5 && rm -rf "$(distdir)"; }; \
- else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
- | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_LDFLAGS = @AM_LDFLAGS@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AVAHI_CFLAGS = @AVAHI_CFLAGS@
-AVAHI_LIBS = @AVAHI_LIBS@
-AWK = @AWK@
-BACKENDS = @BACKENDS@
-BACKEND_CONFS_ENABLED = @BACKEND_CONFS_ENABLED@
-BACKEND_LIBS_ENABLED = @BACKEND_LIBS_ENABLED@
-BACKEND_MANS_ENABLED = @BACKEND_MANS_ENABLED@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLH = @DLH@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-DVIPS = @DVIPS@
-DYNAMIC_FLAG = @DYNAMIC_FLAG@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FIG2DEV = @FIG2DEV@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GPHOTO2_CPPFLAGS = @GPHOTO2_CPPFLAGS@
-GPHOTO2_LDFLAGS = @GPHOTO2_LDFLAGS@
-GPHOTO2_LIBS = @GPHOTO2_LIBS@
-GREP = @GREP@
-GS = @GS@
-HAVE_GPHOTO2 = @HAVE_GPHOTO2@
-IEEE1284_LIBS = @IEEE1284_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_LOCKPATH = @INSTALL_LOCKPATH@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-JPEG_LIBS = @JPEG_LIBS@
-LATEX = @LATEX@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIBV4L_CFLAGS = @LIBV4L_CFLAGS@
-LIBV4L_LIBS = @LIBV4L_LIBS@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOCKPATH_GROUP = @LOCKPATH_GROUP@
-LTALLOCA = @LTALLOCA@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINDEX = @MAKEINDEX@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MATH_LIB = @MATH_LIB@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PDFLATEX = @PDFLATEX@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PNG_LIBS = @PNG_LIBS@
-POSUB = @POSUB@
-PPMTOGIF = @PPMTOGIF@
-PRELOADABLE_BACKENDS = @PRELOADABLE_BACKENDS@
-PRELOADABLE_BACKENDS_ENABLED = @PRELOADABLE_BACKENDS_ENABLED@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-RESMGR_LIBS = @RESMGR_LIBS@
-SANEI_SANEI_JPEG_LO = @SANEI_SANEI_JPEG_LO@
-SANE_CONFIG_PATH = @SANE_CONFIG_PATH@
-SCSI_LIBS = @SCSI_LIBS@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SNMP_CFLAGS = @SNMP_CFLAGS@
-SNMP_CONFIG_PATH = @SNMP_CONFIG_PATH@
-SNMP_LIBS = @SNMP_LIBS@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRICT_LDFLAGS = @STRICT_LDFLAGS@
-STRIP = @STRIP@
-SYSLOG_LIBS = @SYSLOG_LIBS@
-SYSTEMD_CFLAGS = @SYSTEMD_CFLAGS@
-SYSTEMD_LIBS = @SYSTEMD_LIBS@
-TIFF_LIBS = @TIFF_LIBS@
-USB_CFLAGS = @USB_CFLAGS@
-USB_LIBS = @USB_LIBS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-V_MAJOR = @V_MAJOR@
-V_MINOR = @V_MINOR@
-V_REV = @V_REV@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-configdir = @configdir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-effective_target = @effective_target@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-locksanedir = @locksanedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = include lib sanei backend frontend tools doc po testsuite
-DIST_SUBDIRS = include lib sanei backend frontend tools doc po japi testsuite
-dist_doc_DATA = AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS \
- README README.aix README.beos README.darwin README.djpeg README.freebsd \
- README.hp-ux README.linux README.netbsd README.openbsd README.os2 \
- README.solaris README.unixware2 README.unixware7 README.windows \
- README.zeta
-
-EXTRA_DIST = $(PACKAGE).lsm
-
-#
-# Keep the .gitignore files sorted, and use this target to do it.
-# Note that git's negated ignore patterns introduce order dependency
-# and should therefor be sorted with much more care than we do here.
-# Until that has been taken care of, such files are best left alone.
-#
-PERL = perl
-ACLOCAL_AMFLAGS = -I m4
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-include/sane/config.h: include/sane/stamp-h1
- @test -f $@ || rm -f include/sane/stamp-h1
- @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/sane/stamp-h1
-
-include/sane/stamp-h1: $(top_srcdir)/include/sane/config.h.in $(top_builddir)/config.status
- @rm -f include/sane/stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status include/sane/config.h
-$(top_srcdir)/include/sane/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f include/sane/stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f include/sane/config.h include/sane/stamp-h1
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool config.lt
-install-dist_docDATA: $(dist_doc_DATA)
- @$(NORMAL_INSTALL)
- @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
- done
-
-uninstall-dist_docDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
- test ! -s cscope.files \
- || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
- -rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
- -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__post_remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__post_remove_distdir)
-
-dist-lzip: distdir
- tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__post_remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__post_remove_distdir)
-
-dist-tarZ: distdir
- @echo WARNING: "Support for shar distribution archives is" \
- "deprecated." >&2
- @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__post_remove_distdir)
-
-dist-shar: distdir
- @echo WARNING: "Support for distribution archives compressed with" \
- "legacy program 'compress' is deprecated." >&2
- @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__post_remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__post_remove_distdir)
-
-dist dist-all:
- $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
- $(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lz*) \
- lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir)
- chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure \
- $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- --srcdir=.. --prefix="$$dc_install_base" \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__post_remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @test -n '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: trying to run $@ with an empty' \
- '$$(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- $(am__cd) '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(docdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
- distclean-libtool distclean-local distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-dist_docDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_docDATA
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
- am--refresh check check-am clean clean-cscope clean-generic \
- clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
- dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
- dist-tarZ dist-xz dist-zip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-local distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am \
- install-dist_docDATA install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installcheck-local installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-am uninstall uninstall-am uninstall-dist_docDATA
-
-sort-gitignore:
- for f in `find . -name .gitignore`; do \
- if test -n "`sed -n '/^\!/p' $$f`"; then \
- echo "$$f: skipping file with negated pattern" >&2; \
- fi; \
- $(PERL) -e 'print sort <>;' < $$f > $$f.tmptmp; \
- mv $$f.tmptmp $$f; \
- done
-
-#
-# Check to make sure only sane_ and sanei_ symbols are exported from
-# the libraries
-#
-libcheck:
- @echo "Libraries exporting 'illegal' symbols:"
- @for lib in backend/.libs/*.so backend/.libs/*.a; do \
- lines=`nm -g $$lib|grep '\( T \)\|\( D \)'|egrep -v ' _fini| _init'|egrep -v ' sane_| sanei_'`; \
- if test -n "$$lines" ; then \
- echo -e "*** $$lib:\n$$lines"; \
- found_errors="yes"; \
- fi \
- done; \
- echo; \
- echo "Libraries exporting 'non-standard sane_*' symbols:"; \
- for lib in backend/.libs/*.so backend/.libs/*.a; do \
- lines=`nm -g $$lib|grep '\( T \)\|\( D \)'|egrep ' sane_' | egrep -v 'sane_.*init|sane_.*exit|sane_.*get_devices|sane_.*open|sane_.*close|sane_.*get_option_descriptor|sane_.*control_option|sane_.*get_parameters|sane_.*start|sane_.*read|sane_.*cancel|sane_.*set_io_mode|sane_.*get_select_fd|sane_strstatus'` ; \
- if test -n "$$lines" ; then \
- echo -e "*** $$lib:\n$$lines"; \
- found_errors="yes"; \
- fi \
- done;
- if test ! -z $$found_errors ; then \
- exit 1; \
- fi
-
-# Verify that backends do not contain any unwanted public symbols
-# anytime check or distcheck is ran.
-# TODO: Currently this doesn't pass. Uncomment once symbols have
-# been cleaned up.
-#check-am: libcheck
-
-# Run testsuite any time installcheck or distcheck is ran.
-# Must run testsuite after install or else shared library backends
-# will not be found (including test backend).
-installcheck-local:
- cd testsuite && $(MAKE) test.local
-
-$(distdir).lsm: dist $(PACKAGE).lsm
- ( cat $(PACKAGE).lsm | \
- sed -e "s|_DATE_|`date +%d%b%y`|g" |\
- sed -e "s|_VERSION_|$(VERSION)|g" | \
- sed -e "s|_T_S_|`find $(distdir).tar.gz -printf "%4k"`|g" |\
- sed -e "s|_L_S_|`find $(PACKAGE).lsm -printf "%4k"`|g" >\
- $(distdir).lsm \
- )
-lsm: $(distdir).lsm
-
-md5: dist
- md5sum $(distdir).tar.gz > $(distdir).tar.gz.md5
-
-sane-backends: lsm md5
-
-# Clean files created by custom targets in this file.
-clean-local:
- rm -f sane-backends-*.lsm
- rm -f $(distdir).tar.gz.md5
-
-# Clean files created by configure
-distclean-local:
- rm -f include/_stdint.h
- rm -f include/byteorder.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: