New upstream version 1.0.31upstream/1.0.31

1 files changed, 248 insertions, 0 deletions

diff --git a/backend/genesys/command_set_common.cpp b/backend/genesys/command_set_common.cpp
new file mode 100644
index 0000000..381404e
--- /dev/null
+++ b/backend/genesys/command_set_common.cpp
@@ -0,0 +1,248 @@
+/* sane - Scanner Access Now Easy.
+
+   Copyright (C) 2019 Povilas Kanapickas <povilas@radix.lt>
+
+   This file is part of the SANE package.
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful, but
+   WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA 02111-1307, USA.
+*/
+
+#define DEBUG_DECLARE_ONLY
+
+#include "command_set_common.h"
+#include "low.h"
+#include "value_filter.h"
+
+namespace genesys {
+
+CommandSetCommon::~CommandSetCommon() = default;
+
+bool CommandSetCommon::is_head_home(Genesys_Device& dev, ScanHeadId scan_head) const
+{
+    struct HeadSettings {
+        ModelId model_id;
+        ScanHeadId scan_head;
+        GenesysRegisterSettingSet regs;
+    };
+
+    HeadSettings settings[] = {
+        {   ModelId::CANON_8600F,
+            ScanHeadId::PRIMARY, {
+                { 0x6c, 0x20, 0x60 },
+                { 0xa6, 0x00, 0x01 },
+            }
+        },
+        {   ModelId::CANON_8600F,
+            ScanHeadId::SECONDARY, {
+                { 0x6c, 0x00, 0x60 },
+                { 0xa6, 0x01, 0x01 },
+            }
+        },
+    };
+
+    for (const auto& setting : settings) {
+        if (setting.model_id == dev.model->model_id &&
+            setting.scan_head == scan_head)
+        {
+            auto reg_backup = apply_reg_settings_to_device_with_backup(dev, setting.regs);
+            auto status = scanner_read_status(dev);
+            apply_reg_settings_to_device(dev, reg_backup);
+            return status.is_at_home;
+        }
+    }
+
+    auto status = scanner_read_status(dev);
+    return status.is_at_home;
+}
+
+void CommandSetCommon::set_xpa_lamp_power(Genesys_Device& dev, bool set) const
+
+{
+    DBG_HELPER(dbg);
+
+    struct LampSettings {
+        ModelId model_id;
+        ScanMethod scan_method;
+        GenesysRegisterSettingSet regs_on;
+        GenesysRegisterSettingSet regs_off;
+    };
+
+    // FIXME: BUG: we're not clearing the registers to the previous state when returning back when
+    // turning off the lamp
+    LampSettings settings[] = {
+        {   ModelId::CANON_4400F, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::CANON_5600F, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::CANON_8400F, ScanMethod::TRANSPARENCY, {
+                { 0xa6, 0x34, 0xf4 },
+            }, {
+                { 0xa6, 0x40, 0x70 },
+            }
+        },
+        {   ModelId::CANON_8400F, ScanMethod::TRANSPARENCY_INFRARED, {
+                { 0x6c, 0x40, 0x40 },
+                { 0xa6, 0x01, 0xff },
+            }, {
+                { 0x6c, 0x00, 0x40 },
+                { 0xa6, 0x00, 0xff },
+            }
+        },
+        {   ModelId::CANON_8600F, ScanMethod::TRANSPARENCY, {
+                { 0xa6, 0x34, 0xf4 },
+                { 0xa7, 0xe0, 0xe0 },
+            }, {
+                { 0xa6, 0x40, 0x70 },
+            }
+        },
+        {   ModelId::CANON_8600F, ScanMethod::TRANSPARENCY_INFRARED, {
+                { 0xa6, 0x00, 0xc0 },
+                { 0xa7, 0xe0, 0xe0 },
+                { 0x6c, 0x80, 0x80 },
+            }, {
+                { 0xa6, 0x00, 0xc0 },
+                { 0x6c, 0x00, 0x80 },
+            }
+        },
+        {   ModelId::PLUSTEK_OPTICFILM_7200, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7200I, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7200I, ScanMethod::TRANSPARENCY_INFRARED, {
+                { 0xa8, 0x07, 0x07 },
+            }, {
+                { 0xa8, 0x00, 0x07 },
+            }
+        },
+        {   ModelId::PLUSTEK_OPTICFILM_7300, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7400, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7500I, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7500I, ScanMethod::TRANSPARENCY_INFRARED, {
+                { 0xa8, 0x07, 0x07 },
+            }, {
+                { 0xa8, 0x00, 0x07 },
+            }
+        },
+        {   ModelId::PLUSTEK_OPTICFILM_8200I, ScanMethod::TRANSPARENCY, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_8200I, ScanMethod::TRANSPARENCY_INFRARED, {
+                { 0xa8, 0x04, 0x04 },
+            }, {
+                { 0xa8, 0x00, 0x04 },
+            }
+        },
+    };
+
+    for (const auto& setting : settings) {
+        if (setting.model_id == dev.model->model_id &&
+            setting.scan_method == dev.settings.scan_method)
+        {
+            apply_reg_settings_to_device(dev, set ? setting.regs_on : setting.regs_off);
+            return;
+        }
+    }
+
+    throw SaneException("Could not find XPA lamp settings");
+}
+
+
+void CommandSetCommon::set_motor_mode(Genesys_Device& dev, Genesys_Register_Set& regs,
+                                      MotorMode mode) const
+{
+    DBG_HELPER(dbg);
+
+    struct MotorSettings {
+        ModelId model_id;
+        ValueFilterAny<unsigned> resolutions;
+        GenesysRegisterSettingSet regs_primary_and_secondary;
+        GenesysRegisterSettingSet regs_primary;
+        GenesysRegisterSettingSet regs_secondary;
+    };
+
+    MotorSettings settings[] = {
+        {   ModelId::CANON_8400F, { 400, 800, 1600, 3200 }, {
+                { 0x6c, 0x00, 0x90 },
+                { 0xa9, 0x04, 0x06 },
+            }, {
+                { 0x6c, 0x90, 0x90 },
+                { 0xa9, 0x02, 0x06 },
+            }, {}
+        },
+        {   ModelId::CANON_8600F, { 300, 600, 1200 }, {
+                { 0x6c, 0x00, 0x60 },
+                { 0xa6, 0x01, 0x41 },
+            }, {
+                { 0x6c, 0x20, 0x62 },
+                { 0xa6, 0x00, 0x41 },
+            }, {
+                { 0x6c, 0x40, 0x62 },
+                { 0xa6, 0x01, 0x41 },
+            }
+        },
+        {   ModelId::CANON_8600F, { 2400, 4800 }, {
+                { 0x6c, 0x02, 0x62 },
+                { 0xa6, 0x01, 0x41 },
+            }, {
+                { 0x6c, 0x20, 0x62 },
+                { 0xa6, 0x00, 0x41 },
+            }, {
+                { 0x6c, 0x40, 0x62 },
+                { 0xa6, 0x01, 0x41 },
+            }
+        },
+        {   ModelId::HP_SCANJET_G4050, VALUE_FILTER_ANY, {
+                { 0x6b, 0x81, 0x81 }, // set MULTFILM and GPOADF
+                { 0x6c, 0x00, 0x40 }, // note that reverse change is not applied on off
+                // 0xa6 register 0x08 bit likely sets motor power. No move at all without that one
+                { 0xa6, 0x08, 0x08 }, // note that reverse change is not applied on off
+                { 0xa8, 0x00, 0x04 },
+                { 0xa9, 0x30, 0x30 },
+            }, {
+                { 0x6b, 0x00, 0x01 }, // BUG: note that only ADF is unset
+                { 0xa8, 0x04, 0x04 },
+                { 0xa9, 0x00, 0x10 }, // note that 0x20 bit is not reset
+            }, {}
+        },
+        {   ModelId::PLUSTEK_OPTICFILM_7200, VALUE_FILTER_ANY, {}, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7200I, VALUE_FILTER_ANY, {}, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7300, VALUE_FILTER_ANY, {}, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7400, VALUE_FILTER_ANY, {}, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_7500I, VALUE_FILTER_ANY, {}, {}, {} },
+        {   ModelId::PLUSTEK_OPTICFILM_8200I, VALUE_FILTER_ANY, {}, {}, {} },
+    };
+
+    for (const auto& setting : settings) {
+        if (setting.model_id == dev.model->model_id &&
+            setting.resolutions.matches(dev.session.output_resolution))
+        {
+            switch (mode) {
+                case MotorMode::PRIMARY: {
+                    apply_reg_settings_to_device(dev, setting.regs_primary);
+                    break;
+                }
+                case MotorMode::PRIMARY_AND_SECONDARY: {
+                    apply_reg_settings_to_device(dev, setting.regs_primary_and_secondary);
+                    break;
+                }
+                case MotorMode::SECONDARY: {
+                    apply_reg_settings_to_device(dev, setting.regs_secondary);
+                    break;
+                }
+            }
+            regs.state.motor_mode = mode;
+            return;
+        }
+    }
+
+    throw SaneException("Motor settings have not been found");
+}
+
+} // namespace genesys