New upstream version 1.0.29upstream/1.0.29

1 files changed, 380 insertions, 0 deletions

diff --git a/backend/genesys/tables_motor_profile.cpp b/backend/genesys/tables_motor_profile.cpp
new file mode 100644
index 0000000..18f7271
--- /dev/null
+++ b/backend/genesys/tables_motor_profile.cpp
@@ -0,0 +1,380 @@
+/*  sane - Scanner Access Now Easy.
+
+    Copyright (C) 2019 Povilas Kanapickas <povilas@radix.lt>
+
+    This file is part of the SANE package.
+
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License as
+    published by the Free Software Foundation; either version 2 of the
+    License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful, but
+    WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+    MA 02111-1307, USA.
+
+    As a special exception, the authors of SANE give permission for
+    additional uses of the libraries contained in this release of SANE.
+
+    The exception is that, if you link a SANE library with other files
+    to produce an executable, this does not by itself cause the
+    resulting executable to be covered by the GNU General Public
+    License.  Your use of that executable is in no way restricted on
+    account of linking the SANE library code into it.
+
+    This exception does not, however, invalidate any other reasons why
+    the executable file might be covered by the GNU General Public
+    License.
+
+    If you submit changes to SANE to the maintainers to be included in
+    a subsequent release, you agree by submitting the changes that
+    those changes may be distributed with this exception intact.
+
+    If you write modifications of your own for SANE, it is your choice
+    whether to permit this exception to apply to your modifications.
+    If you do not wish that, delete this exception notice.
+*/
+
+#define DEBUG_DECLARE_ONLY
+
+#include "low.h"
+
+namespace genesys {
+
+StaticInit<std::vector<Motor_Profile>> gl843_motor_profiles;
+
+void genesys_init_motor_profile_tables_gl843()
+{
+    gl843_motor_profiles.init();
+
+    auto profile = Motor_Profile();
+    profile.motor_id = MotorId::KVSS080;
+    profile.exposure = 8000;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(44444, 500, 489);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::G4050;
+    profile.exposure = 8016;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(7842, 320, 602);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::G4050;
+    profile.exposure = 15624;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(9422, 254, 1004);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::G4050;
+    profile.exposure = 42752;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(42752, 1706, 610);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::G4050;
+    profile.exposure = 56064;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(28032, 2238, 604);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_4400F;
+    profile.exposure = 11640;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(49152, 484, 1014);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_8400F;
+    profile.exposure = 50000;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(8743, 300, 794);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_8600F;
+    profile.exposure = 0x59d8;
+    profile.step_type = StepType::QUARTER;
+    // FIXME: if the exposure is lower then we'll select another motor
+    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7200I;
+    profile.exposure = 0;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(39682, 1191, 15);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7300;
+    profile.exposure = 0x2f44;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(31250, 1512, 6);
+    gl843_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7500I;
+    profile.exposure = 0;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(31250, 1375, 7);
+    gl843_motor_profiles->push_back(profile);
+}
+
+StaticInit<std::vector<Motor_Profile>> gl846_motor_profiles;
+
+void genesys_init_motor_profile_tables_gl846()
+{
+    gl846_motor_profiles.init();
+
+    auto profile = Motor_Profile();
+    profile.motor_id = MotorId::IMG101;
+    profile.exposure = 11000;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(22000, 1000, 1017);
+
+    gl846_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::PLUSTEK_OPTICBOOK_3800;
+    profile.exposure = 11000;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(22000, 1000, 1017);
+    gl846_motor_profiles->push_back(profile);
+}
+
+/**
+ * database of motor profiles
+ */
+
+StaticInit<std::vector<Motor_Profile>> gl847_motor_profiles;
+
+void genesys_init_motor_profile_tables_gl847()
+{
+    gl847_motor_profiles.init();
+
+    auto profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_100;
+    profile.exposure = 2848;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_100;
+    profile.exposure = 1424;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_100;
+    profile.exposure = 1432;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_100;
+    profile.exposure = 2712;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 279);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_100;
+    profile.exposure = 5280;
+    profile.step_type = StepType::EIGHTH;
+    profile.slope = MotorSlope::create_from_steps(31680, 534, 247);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_200;
+    profile.exposure = 2848;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_200;
+    profile.exposure = 1424;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_200;
+    profile.exposure = 1432;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_200;
+    profile.exposure = 2712;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 279);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_200;
+    profile.exposure = 5280;
+    profile.step_type = StepType::EIGHTH;
+    profile.slope = MotorSlope::create_from_steps(31680, 534, 247);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_200;
+    profile.exposure = 10416;
+    profile.step_type = StepType::EIGHTH;
+    profile.slope = MotorSlope::create_from_steps(31680, 534, 247);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_700;
+    profile.exposure = 2848;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_700;
+    profile.exposure = 1424;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_700;
+    profile.exposure = 1504;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_700;
+    profile.exposure = 2696;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(46876, 2022, 127);
+    gl847_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_700;
+    profile.exposure = 10576;
+    profile.step_type = StepType::EIGHTH;
+    profile.slope = MotorSlope::create_from_steps(46876, 15864, 2);
+    gl847_motor_profiles->push_back(profile);
+}
+
+StaticInit<std::vector<Motor_Profile>> gl124_motor_profiles;
+
+void genesys_init_motor_profile_tables_gl124()
+{
+    gl124_motor_profiles.init();
+
+    // NEXT LPERIOD=PREVIOUS*2-192
+    Motor_Profile profile;
+    profile.motor_id = MotorId::CANON_LIDE_110;
+    profile.exposure = 2768;
+    profile.step_type = StepType::FULL;
+    profile.slope = MotorSlope::create_from_steps(62496, 335, 255);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_110;
+    profile.exposure = 5360;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(62496, 335, 469);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_110;
+    profile.exposure = 10528;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(62496, 2632, 3);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_110;
+    profile.exposure = 20864;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(62496, 10432, 3);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_120;
+    profile.exposure = 4608;
+    profile.step_type = StepType::FULL;
+    profile.slope = MotorSlope::create_from_steps(62496, 864, 127);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_120;
+    profile.exposure = 5360;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(62496, 2010, 63);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_120;
+    profile.exposure = 10528;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(62464, 2632, 3);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_120;
+    profile.exposure = 20864;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(62592, 10432, 5);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_210;
+    profile.exposure = 2768;
+    profile.step_type = StepType::FULL;
+    profile.slope = MotorSlope::create_from_steps(62496, 335, 255);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_210;
+    profile.exposure = 5360;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(62496, 335, 469);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_210;
+    profile.exposure = 10528;
+    profile.step_type = StepType::HALF;
+    profile.slope = MotorSlope::create_from_steps(62496, 2632, 3);
+    gl124_motor_profiles->push_back(profile);
+
+    profile = Motor_Profile();
+    profile.motor_id = MotorId::CANON_LIDE_210;
+    profile.exposure = 20864;
+    profile.step_type = StepType::QUARTER;
+    profile.slope = MotorSlope::create_from_steps(62496, 10432, 4);
+    gl124_motor_profiles->push_back(profile);
+}
+
+void genesys_init_motor_profile_tables()
+{
+    genesys_init_motor_profile_tables_gl843();
+    genesys_init_motor_profile_tables_gl846();
+    genesys_init_motor_profile_tables_gl847();
+    genesys_init_motor_profile_tables_gl124();
+}
+
+} // namespace genesys