diff options
| author | Jörg Frings-Fürst <debian@jff-webhosting.net> | 2014-10-06 14:00:40 +0200 |
|---|---|---|
| committer | Jörg Frings-Fürst <debian@jff-webhosting.net> | 2014-10-06 14:00:40 +0200 |
| commit | 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 (patch) | |
| tree | 2e301d871bbeeb44aa57ff9cc070fcf3be484487 /backend/gt68xx_devices.c | |
Initial import of sane-backends version 1.0.24-1.2
Diffstat (limited to 'backend/gt68xx_devices.c')
| -rw-r--r-- | backend/gt68xx_devices.c | 1947 |
1 files changed, 1947 insertions, 0 deletions
diff --git a/backend/gt68xx_devices.c b/backend/gt68xx_devices.c new file mode 100644 index 0000000..1239190 --- /dev/null +++ b/backend/gt68xx_devices.c @@ -0,0 +1,1947 @@ +/* sane - Scanner Access Now Easy. + + Copyright (C) 2002 Sergey Vlasov <vsu@altlinux.ru> + Copyright (C) 2002 - 2007 Henning Geinitz <sane@geinitz.org> + + This file is part of the SANE package. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA. + + As a special exception, the authors of SANE give permission for + additional uses of the libraries contained in this release of SANE. + + The exception is that, if you link a SANE library with other files + to produce an executable, this does not by itself cause the + resulting executable to be covered by the GNU General Public + License. Your use of that executable is in no way restricted on + account of linking the SANE library code into it. + + This exception does not, however, invalidate any other reasons why + the executable file might be covered by the GNU General Public + License. + + If you submit changes to SANE to the maintainers to be included in + a subsequent release, you agree by submitting the changes that + those changes may be distributed with this exception intact. + + If you write modifications of your own for SANE, it is your choice + whether to permit this exception to apply to your modifications. + If you do not wish that, delete this exception notice. +*/ + +/* Scanner-specific data */ + +#include "gt68xx_low.h" +#include "gt68xx_generic.c" +#include "gt68xx_gt6801.c" +#include "gt68xx_gt6816.c" + +static GT68xx_Command_Set mustek_gt6816_command_set = { + "mustek-gt6816", /* Name of this command set */ + + 0x40, /* Request type */ + 0x01, /* Request */ + + 0x200c, /* Memory read - wValue */ + 0x200b, /* Memory write - wValue */ + + 0x2010, /* Send normal command - wValue */ + 0x3f40, /* Send normal command - wIndex */ + 0x2011, /* Receive normal result - wValue */ + 0x3f00, /* Receive normal result - wIndex */ + + 0x2012, /* Send small command - wValue */ + 0x3f40, /* Send small command - wIndex */ + 0x2013, /* Receive small result - wValue */ + 0x3f00, /* Receive small result - wIndex */ + + /* activate */ NULL, + /* deactivate */ NULL, + gt6816_check_firmware, + gt6816_download_firmware, + gt6816_get_power_status, + gt6816_get_ta_status, + gt6816_lamp_control, + gt6816_is_moving, + gt68xx_generic_move_relative, + gt6816_carriage_home, + /* gt68xx_generic_paperfeed */ NULL, + gt68xx_generic_start_scan, + gt68xx_generic_read_scanned_data, + gt6816_stop_scan, + gt68xx_generic_setup_scan, + gt68xx_generic_set_afe, + gt68xx_generic_set_exposure_time, + gt68xx_generic_get_id, + /* gt68xx_generic_move_paper */ NULL, + /* gt6816_document_present */ NULL +}; + +static GT68xx_Command_Set mustek_gt6816_sheetfed_command_set = { + "mustek-gt6816", /* Name of this command set */ + + 0x40, /* Request type */ + 0x01, /* Request */ + + 0x200c, /* Memory read - wValue */ + 0x200b, /* Memory write - wValue */ + + 0x2010, /* Send normal command - wValue */ + 0x3f40, /* Send normal command - wIndex */ + 0x2011, /* Receive normal result - wValue */ + 0x3f00, /* Receive normal result - wIndex */ + + 0x2012, /* Send small command - wValue */ + 0x3f40, /* Send small command - wIndex */ + 0x2013, /* Receive small result - wValue */ + 0x3f00, /* Receive small result - wIndex */ + + /* activate */ NULL, + /* deactivate */ NULL, + gt6816_check_firmware, + gt6816_download_firmware, + gt6816_get_power_status, + gt6816_get_ta_status, + gt6816_lamp_control, + gt6816_is_moving, + gt68xx_generic_move_relative, + /* gt6816_carriage_home */ NULL, + gt68xx_generic_paperfeed, + gt68xx_generic_start_scan, + gt68xx_generic_read_scanned_data, + gt6801_stop_scan, + gt68xx_generic_setup_scan, + gt68xx_generic_set_afe, + gt68xx_generic_set_exposure_time, + gt68xx_generic_get_id, + gt68xx_generic_move_paper, + gt6816_document_present +}; + +static GT68xx_Command_Set mustek_gt6801_command_set = { + "mustek-gt6801", + + + 0x40, /* Request type */ + 0x01, /* Request */ + + 0x200a, /* Memory read - wValue */ + 0x2009, /* Memory write - wValue */ + + 0x2010, /* Send normal command - wValue */ + 0x3f40, /* Send normal command - wIndex */ + 0x2011, /* Receive normal result - wValue */ + 0x3f00, /* Receive normal result - wIndex */ + + 0x2012, /* Send small command - wValue */ + 0x3f40, /* Send small command - wIndex */ + 0x2013, /* Receive small result - wValue */ + 0x3f00, /* Receive small result - wIndex */ + + /* activate */ NULL, + /* deactivate */ NULL, + gt6801_check_firmware, + gt6801_download_firmware, + gt6801_get_power_status, + /* get_ta_status (FIXME: implement this) */ NULL, + gt6801_lamp_control, + gt6801_is_moving, + /* gt68xx_generic_move_relative *** to be tested */ NULL, + gt6801_carriage_home, + /* gt68xx_generic_paperfeed */ NULL, + gt68xx_generic_start_scan, + gt68xx_generic_read_scanned_data, + gt6801_stop_scan, + gt68xx_generic_setup_scan, + gt68xx_generic_set_afe, + gt68xx_generic_set_exposure_time, + gt68xx_generic_get_id, + /* gt68xx_generic_move_paper */ NULL, + /* gt6816_document_present */ NULL +}; + +static GT68xx_Command_Set plustek_gt6801_command_set = { + "plustek-gt6801", + + 0x40, /* Request type */ + 0x04, /* Request */ + + 0x200a, /* Memory read - wValue */ + 0x2009, /* Memory write - wValue */ + + 0x2010, /* Send normal command - wValue */ + 0x3f40, /* Send normal command - wIndex */ + 0x2011, /* Receive normal result - wValue */ + 0x3f00, /* Receive normal result - wIndex */ + + 0x2012, /* Send small command - wValue */ + 0x3f40, /* Send small command - wIndex */ + 0x2013, /* Receive small result - wValue */ + 0x3f00, /* Receive small result - wIndex */ + + /* activate */ NULL, + /* deactivate */ NULL, + gt6801_check_plustek_firmware, + gt6801_download_firmware, + gt6801_get_power_status, + /* get_ta_status (FIXME: implement this) */ NULL, + gt6801_lamp_control, + gt6801_is_moving, + /* gt68xx_generic_move_relative *** to be tested */ NULL, + gt6801_carriage_home, + /* gt68xx_generic_paperfeed */ NULL, + gt68xx_generic_start_scan, + gt68xx_generic_read_scanned_data, + gt6801_stop_scan, + gt68xx_generic_setup_scan, + gt68xx_generic_set_afe, + /* set_exposure_time */ NULL, + gt68xx_generic_get_id, + /* gt68xx_generic_move_paper */ NULL, + /* gt6816_document_present */ NULL +}; + +static GT68xx_Model unknown_model = { + "unknown-scanner", /* Name */ + "unknown manufacturer", /* Device vendor string */ + "unknown device -- use override to select", /* Device model name */ + "unknown", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {8, 0}, /* possible depths in gray mode */ + {8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (13.0), /* Start of scan area in mm (y) */ + SANE_FIX (200.0), /* Size of scan area in mm (x) */ + SANE_FIX (280.0), /* Size of scan area in mm (y) */ + + SANE_FIX (9.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */ + /* Standard values for unknown scanner */ +}; + +static GT68xx_Model mustek_2400ta_model = { + "mustek-bearpaw-2400-ta", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 2400 TA", /* Device model name */ + "A2fw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 200, 100, 50, 0}, /* possible x-resolutions */ + {2400, 1200, 600, 300, 200, 100, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.67), /* Start of scan area in mm (x) */ + SANE_FIX (7.4), /* Start of scan area in mm (y) */ + SANE_FIX (219.0), /* Size of scan area in mm (x) */ + SANE_FIX (298.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.635), /* Start of black mark in mm (x) */ + + SANE_FIX (94.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (107.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (37.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (165.0), /* Size of scan area in TA mode in mm (y) */ + SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 24, 48, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_SCAN_FROM_HOME /* Which flags are needed for this scanner? */ + /* flatbed values tested */ +}; + +static GT68xx_Model mustek_2400taplus_model = { + "mustek-bearpaw-2400-ta-plus", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 2400 TA Plus", /* Device model name */ + "A2Dfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 100, 50, 0}, /* possible x-resolutions */ + {2400, 1200, 600, 300, 100, 50, 0}, /* possible y-resolutions */ + {8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (7.41), /* Start of scan area in mm (x) */ + SANE_FIX (7.4), /* Start of scan area in mm (y) */ + SANE_FIX (217.5), /* Size of scan area in mm (x) */ + SANE_FIX (298.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (5.0), /* Start of black mark in mm (x) */ + + SANE_FIX (94.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (107.0) /* Start of scan area in TA mode in mm (y) */ , + SANE_FIX (37.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (165.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 48, 96, /* RGB CCD Line-distance correction in pixel */ + 8, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_USE_OPTICAL_X | GT68XX_FLAG_SCAN_FROM_HOME /* Which flags are needed for this scanner? */ + /* Setup and tested */ +}; + +static GT68xx_Model mustek_2448taplus_model = { + "mustek-bearpaw-2448-ta-plus", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 2448 TA Plus", /* Device model name */ + "A2Nfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 200, 100, 0}, /* possible x-resolutions */ + {2400, 1200, 600, 300, 200, 100, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (7.41), /* Start of scan area in mm (x) */ + SANE_FIX (7.4), /* Start of scan area in mm (y) */ + SANE_FIX (216.3), /* Size of scan area in mm (x) */ + SANE_FIX (297.5), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (4.0), /* Start of black mark in mm (x) */ + + SANE_FIX (94.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (105.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (36.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (165.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 48, 96, /* RGB CCD Line-distance correction in pixel */ + 8, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */ + /* Based on data from Jakub Dvo?ák <xdvorak@chello.cz>. */ +}; + +static GT68xx_Model mustek_1200ta_model = { + "mustek-bearpaw-1200-ta", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 1200 TA", /* Device model name */ + "A1fw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (8.4), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (220.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (6.9), /* Start of black mark in mm (x) */ + + SANE_FIX (98.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (108.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (37.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (163.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */ + + 32, 16, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + 0 /* Which flags are needed for this scanner? */ + /* Setup for 1200 TA */ +}; + +static GT68xx_Model mustek_1200cuplus_model = { + "mustek-bearpaw-1200-cu-plus", /* Name */ + "Mustek", /* Device vendor string */ + "Bearpaw 1200 CU Plus", /* Device model name */ + "PS1Dfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (13.0), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (9.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */ + /* Tested by Hamersky Robert r.hamersky at utanet.at */ +}; + +static GT68xx_Model mustek_1200cuplus2_model = { + "mustek-bearpaw-1200-cu-plus-2", /* Name */ + "Mustek", /* Device vendor string */ + "Bearpaw 1200 CU Plus", /* Device model name */ + "PS1Gfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (4.0), /* Start of scan area in mm (x) */ + SANE_FIX (13.0), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (5.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x19, 0x03, 0x1b, 0x05, 0x19, 0x03}, /* Default offset/gain */ + {0xb0, 0xb0, 0xb0}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */ + /* Tested by hmg */ +}; + +static GT68xx_Model mustek_2400cuplus_model = { + "mustek-bearpaw-2400-cu-plus", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 2400 CU Plus", /* Device model name */ + "PS2Dfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 200, 150, 100, 50, 0}, /* possible x-resolutions */ + {2400, 1200, 600, 300, 200, 150, 100, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (2.0), /* Start of scan area in mm (x) */ + SANE_FIX (13.0), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (300.0), /* Size of scan area in mm (y) */ + + SANE_FIX (4.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x15, 0x08, 0x12, 0x05, 0x12, 0x05}, /* Default offset/gain */ + {0x2a0, 0x1ab, 0x10d}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */ + /* Setup and tested */ +}; + +/* Seems that Mustek ScanExpress 1200 UB Plus, the Mustek BearPaw 1200 CU + * and lots of other scanners have the same USB identifier. + */ +static GT68xx_Model mustek_1200cu_model = { + "mustek-bearpaw-1200-cu", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 1200 CU", /* Device model name */ + "PS1fw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6801_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 600, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (13.0), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (4.2), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x13, 0x04, 0x15, 0x06, 0x0f, 0x02}, /* Default offset/gain */ + {0x150, 0x150, 0x150}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + 0 /* Which flags are needed for this scanner? */ + /* Setup and tested */ +}; + +static GT68xx_Model mustek_scanexpress1200ubplus_model = { + "mustek-scanexpress-1200-ub-plus", /* Name */ + "Mustek", /* Device vendor string */ + "ScanExpress 1200 UB Plus", /* Device model name */ + "SBfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6801_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (15.5), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (6.5), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x0f, 0x01, 0x15, 0x06, 0x13, 0x04}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + 0 /* Which flags are needed for this scanner? */ + /* Setup and tested */ +}; + +static GT68xx_Model mustek_scanexpress1248ub_model = { + "mustek-scanexpress-1248-ub", /* Name */ + "Mustek", /* Device vendor string */ + "ScanExpress 1248 UB", /* Device model name */ + "SBSfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (4.0), /* Start of scan area in mm (x) */ + SANE_FIX (14.5), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (9.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x1e, 0x08, 0x21, 0x0d, 0x1b, 0x05}, /* Default offset/gain */ + {0x50, 0x50, 0x50}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */ + /* tested by hmg */ +}; + + +static GT68xx_Model artec_ultima2000_model = { + "artec-ultima-2000", /* Name */ + "Artec", /* Device vendor string */ + "Ultima 2000", /* Device model name */ + "Gt680xfw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6801_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 200, 150, 100, 75, 50, 0}, /* possible x-resolutions */ + {600, 300, 200, 150, 100, 75, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (2.0), /* Start of scan area in mm (x) */ + SANE_FIX (7.0), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x0f, 0x01, 0x15, 0x06, 0x13, 0x04}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_MIRROR_X | GT68XX_FLAG_MOTOR_HOME | GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */ + /* Setup for Cytron TCM MD 9385 */ +}; + +static GT68xx_Model mustek_2400cu_model = { + "mustek-bearpaw-2400-cu", /* Name */ + "Mustek", /* Device vendor string */ + "BearPaw 2400 CU", /* Device model name */ + "PS2fw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6801_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 150, 100, 50, 0}, /* possible x-resolutions */ + {2400, 1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (13.5), /* Start of scan area in mm (y) */ + SANE_FIX (215.0), /* Size of scan area in mm (x) */ + SANE_FIX (296.9), /* Size of scan area in mm (y) */ + + SANE_FIX (5.5), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.9), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x0f, 0x01, 0x15, 0x06, 0x13, 0x04}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + 0 /* Which flags are needed for this scanner? */ + /* basically tested, details may need tweaking */ +}; + +static GT68xx_Model mustek_scanexpress2400usb_model = { + "mustek-scanexpress-2400-usb", /* Name */ + "Mustek", /* Device vendor string */ + "ScanExpress 2400 USB", /* Device model name */ + "P9fw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6801_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (5.0), /* Start of scan area in mm (x) */ + SANE_FIX (12.0), /* Start of scan area in mm (y) */ + SANE_FIX (224.0), /* Size of scan area in mm (x) */ + SANE_FIX (300.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (7.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 24, 12, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x12, 0x06, 0x0e, 0x03, 0x19, 0x25}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_UNTESTED | GT68XX_FLAG_SE_2400 /* Which flags are needed for this scanner? */ + /* only partly tested, from "Fan Dan" <dan_fancn@hotmail.com> */ +}; + +static GT68xx_Model mustek_a3usb_model = { + "mustek-scanexpress-a3-usb", /* Name */ + "Mustek", /* Device vendor string */ + "ScanExpress A3 USB", /* Device model name */ + "A32fw.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 300, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 300, /* base x-res used to calculate geometry */ + 300, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {300, 150, 75, 50, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (7.0), /* Start of scan area in mm (x) */ + SANE_FIX (11.5), /* Start of scan area in mm (y) */ + SANE_FIX (297.0), /* Size of scan area in mm (x) */ + SANE_FIX (433.0), /* Size of scan area in mm (y) */ + + SANE_FIX (2.4), /* Start of white strip in mm (y) */ + SANE_FIX (0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 5, 5, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x14, 0x05, 0x12, 0x05, 0x17, 0x0c}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_CIS_LAMP /* Which flags are needed for this scanner? */ + /* Tested by hmg. This scanner is a bit strange as it uses a CIS sensor but + it also has a lamp. So the lamp needs to be heated but CIS mode must be + used for scanning and calibration. There is no TA for that scanner */ +}; + +static GT68xx_Model lexmark_x73_model = { + "lexmark-x73", /* Name */ + "Lexmark", /* Device vendor string */ + "X73", /* Device model name */ + "OSLO3071b2.usb", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (6.519), /* Start of scan area in mm (x) */ + SANE_FIX (12.615), /* Start of scan area in mm (y) */ + SANE_FIX (220.0), /* Size of scan area in mm (x) */ + SANE_FIX (297.0), /* Size of scan area in mm (y) */ + + SANE_FIX (1.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 32, 16, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + 0 /* Which flags are needed for this scanner? */ + /* When using automatic gain pictures are too dark. Only some ad hoc tests for + lexmark x70 were done so far. WARNING: Don't use the Full scan option + with the above settings, otherwise the sensor may bump at the end of + the sledge and the scanner may be damaged! */ +}; + +static GT68xx_Model plustek_op1248u_model = { + "plustek-op1248u", /* Name */ + "Plustek", /* Device vendor string */ + "OpticPro 1248U", /* Device model name */ + "ccd548.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &plustek_gt6801_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.5), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (216.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x1e, 0x24, 0x1d, 0x1f, 0x1d, 0x20}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* tested */ +}; + +static GT68xx_Model plustek_u16b_model = { + "plustek-u16b", /* Name */ + "Plustek", /* Device vendor string */ + "OpticPro U16B", /* Device model name */ + "ccd68861.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {16, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (5.5), /* Start of scan area in mm (x) */ + SANE_FIX (8.5), /* Start of scan area in mm (y) */ + SANE_FIX (216.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x18, 0x16, 0x16, 0x0f, 0x17, 0x11}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_NO_POWER_STATUS | + GT68XX_FLAG_NO_LINEMODE + /* Which flags are needed for this scanner? */ + /* Tested with a U16B by Henning Meier-Geinitz. 600 dpi is maximum + vertically. Line mode does not work. That's a hardware/firmware + issue. */ +}; + +static GT68xx_Model plustek_ops12_model = { + "plustek-opticpro-s12", /* Name */ + "Plustek", /* Device vendor string */ + "OpticPro S12", /* Device model name */ + "ccd548.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.5), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* Seems to work */ +}; + +static GT68xx_Model plustek_ops24_model = { + "plustek-opticpro-s24", /* Name */ + "Plustek", /* Device vendor string */ + "OpticPro S24", /* Device model name */ + "ccd569.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 200, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 200, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (4.5), /* Start of scan area in mm (x) */ + SANE_FIX (8.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 48, 24, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x18, 0x1c, 0x16, 0x12, 0x18, 0x1c}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE + /* Which flags are needed for this scanner? */ + /* Works (tested by Filip Kaluza). Based on genius Colorpage Vivid 1200 X. */ +}; + + +static GT68xx_Model genius_vivid4_model = { + "genius-colorpage-vivid4", /* Name */ + "Genius", /* Device vendor string */ + "ColorPage Vivid 4", /* Device model name */ + "ccd68861.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {16, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (5.5), /* Start of scan area in mm (x) */ + SANE_FIX (8.5), /* Start of scan area in mm (y) */ + SANE_FIX (216.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x18, 0x16, 0x16, 0x0f, 0x17, 0x11}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_NO_POWER_STATUS | + GT68XX_FLAG_NO_LINEMODE + /* Which flags are needed for this scanner? */ + /* This scanner seems to be very similar to Plustelk U16B and is reported to work. */ +}; + + +static GT68xx_Model genius_vivid3x_model = { + "genius-colorpage-vivid3x", /* Name */ + "Genius", /* Device vendor string */ + "Colorpage Vivid3x", /* Device model name */ + "ccd548.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &plustek_gt6801_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.5), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* Tested to some degree, based on the Plustek OpticPro 1248U */ +}; + +static GT68xx_Model genius_vivid4x_model = { + "genius-colorpage-vivid4x", /* Name */ + "Genius", /* Device vendor string */ + "Colorpage Vivid4x", /* Device model name */ + "ccd548.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.5), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* Is reported to work, copied from 3x, some values from Claudio Filho <filhocf@openoffice.org> */ +}; + +static GT68xx_Model genius_vivid4xe_model = { + "genius-colorpage-vivid4xe", /* Name */ + "Genius", /* Device vendor string */ + "Colorpage Vivid4xe", /* Device model name */ + "ccd548.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.5), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* tested a bit */ +}; + +static GT68xx_Model genius_vivid3xe_model = { + "genius-colorpage-vivid3xe", /* Name */ + "Genius", /* Device vendor string */ + "Colorpage Vivid3xe", /* Device model name */ + "ccd548.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &plustek_gt6801_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 600, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 0}, /* possible x-resolutions */ + {600, 300, 150, 75, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (3.5), /* Start of scan area in mm (x) */ + SANE_FIX (7.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* mostly untested, based on the Genius Vivid3x */ +}; + +static GT68xx_Model genius_vivid1200x_model = { + "genius-colorpage-vivid-1200-x", /* Name */ + "Genius", /* Device vendor string */ + "Colorpage Vivid 1200 X", /* Device model name */ + "ccd569.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 200, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 200, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (4.5), /* Start of scan area in mm (x) */ + SANE_FIX (8.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 48, 24, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x18, 0x1c, 0x16, 0x12, 0x18, 0x1c}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE + /* Which flags are needed for this scanner? */ + /* Tested. */ +}; + + +static GT68xx_Model genius_vivid1200xe_model = { + "genius-colorpage-vivid-1200-xe", /* Name */ + "Genius", /* Device vendor string */ + "Colorpage Vivid 1200 XE", /* Device model name */ + "ccd569.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_TRUE, /* Use base_ydpi for all resolutions */ + + {600, 300, 200, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 200, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (4.5), /* Start of scan area in mm (x) */ + SANE_FIX (8.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (1.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 48, 24, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x18, 0x1c, 0x16, 0x12, 0x18, 0x1c}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_FALSE, /* Is this a CIS scanner? */ + GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_ALWAYS_LINEMODE /* Which flags are needed for this scanner? */ + /* Tested by hmg */ +}; + +static GT68xx_Model iriscan_express_2_model = { + "iriscan-express-2", /* Name */ + "Iris", /* Device vendor string */ + "Iriscan Express 2", /* Device model name */ + "cism216.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_sheetfed_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + /* values based on analyze of the firmware */ + {600, 400, 300, 200, 150, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 400, 300, 200, 150, 100, 50, 0}, /* possible y-resolutions */ + {16, 8, 0}, /* possible depths in gray mode */ + {16, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (1.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (18.0), /* Start of white strip in mm (y) */ + SANE_FIX (21.72), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x22, 0x0c, 0x22, 0x0a, 0x24, 0x09}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_POWER_STATUS | GT68XX_FLAG_SHEET_FED | GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_HAS_CALIBRATE +}; + + +static GT68xx_Model plustek_opticslim_m12_model = { + "plustek-opticslim-m12", /* Name */ + "Plustek", /* Device vendor string */ + "OpticSlim M12", /* Device model name */ + "cism216.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_sheetfed_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 400, 300, 200, 150, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 400, 300, 200, 150, 100, 50, 0}, /* possible y-resolutions */ + {16, 8, 0}, /* possible depths in gray mode */ + {16, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (1.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (18.0), /* Start of white strip in mm (y) */ + SANE_FIX (21.72), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x24, 0x0a, 0x23, 0x0f, 0x23, 0x0b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_POWER_STATUS | GT68XX_FLAG_SHEET_FED | GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_HAS_CALIBRATE +}; + +static GT68xx_Model genius_sf600_model = { + "genius-SF600", /* Name */ + "Genius", /* Device vendor string */ + "ColorPage SF600", /* Device model name */ + "cism216.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_sheetfed_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 300, 200, 150, 100, 0}, /* possible x-resolutions */ + {600, 300, 200, 150, 100, 0}, /* possible y-resolutions */ + {16, 8, 0}, /* possible depths in gray mode */ + {16, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.0), /* Start of scan area in mm (x) */ + SANE_FIX (1.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (18.0), /* Start of white strip in mm (y) */ + SANE_FIX (21.72), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ + {0x24, 0x0a, 0x23, 0x0f, 0x23, 0x0b}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_NO_POWER_STATUS | GT68XX_FLAG_UNTESTED | GT68XX_FLAG_SHEET_FED | GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_HAS_CALIBRATE | GT68XX_FLAG_NO_STOP +}; + +/* Untested but should work according to Ryan Reading <ryanr23@gmail.com>. Based on Plustek M12 */ + +static GT68xx_Model plustek_opticslim1200_model = { + "plustek-opticslim-1200", /* Name */ + "Plustek", /* Device vendor string */ + "OpticSlim 1200", /* Device model name */ + "cism216.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 600, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 600, /* base x-res used to calculate geometry */ + 600, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {600, 300, 150, 75, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */ + {16, 8, 0}, /* possible depths in gray mode */ + {16, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (1.0), /* Start of scan area in mm (x) */ + SANE_FIX (9.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (140.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x15, 0x09, 0x18, 0x11, 0x16, 0x0c}, /* Default offset/gain */ + {0x157, 0x157, 0x157}, /* Default exposure parameters */ + SANE_FIX (2.0), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + 0 +}; + +static GT68xx_Model plustek_opticslim2400_model = { + "plustek-opticslim-2400", /* Name */ + "Plustek", /* Device vendor string */ + "OpticSlim 2400", /* Device model name */ + "cis3R5B1.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 150, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (1.0), /* Start of scan area in mm (x) */ + SANE_FIX (9.5), /* Start of scan area in mm (y) */ + SANE_FIX (217.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (0.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x15, 0x09, 0x18, 0x11, 0x16, 0x0c}, /* Default offset/gain */ + {0x300, 0x300, 0x300}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + 0 +/* By Detlef Gausepohl <detlef@psych.rwth-aachen.de>. Fixed and tested by hmg. */ +}; + +static GT68xx_Model visioneer_onetouch_7300_model = { + "visioneer-onetouch-7300", /* Name */ + "Visioneer", /* Device vendor string */ + "OneTouch 7300", /* Device model name */ + "Cis3r5b1.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 1200, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + {1200, 600, 300, 150, 100, 50, 0}, /* possible x-resolutions */ + {1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */ + {12, 8, 0}, /* possible depths in gray mode */ + {12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (1.0), /* Start of scan area in mm (x) */ + SANE_FIX (9.5), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (140.0), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x15, 0x09, 0x18, 0x11, 0x16, 0x0c}, /* Default offset/gain */ + {0x80, 0x80, 0x80}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + 0 +}; + +/* Tested by Jason Novek. Based on Plustek OpticSlim 2400. */ + + +static GT68xx_Model genius_colorpageslim_1200_model = { + "genius-colorpageslim-1200", /* Name */ + "Genius", /* Device vendor string */ + "ColorPage Slim 1200", /* Device model name */ + "Cis3r5b1.fw", /* Name of the firmware file */ + SANE_FALSE, /* Dynamic allocation flag */ + + &mustek_gt6816_command_set, /* Command set used by this scanner */ + + 1200, /* maximum optical sensor resolution */ + 2400, /* maximum motor resolution */ + 1200, /* base x-res used to calculate geometry */ + 1200, /* base y-res used to calculate geometry */ + 1200, /* if ydpi is equal or higher, disable backtracking */ + SANE_FALSE, /* Use base_ydpi for all resolutions */ + + + + {1200, 600, 300, 150, 100, 50, 0}, /* possible x-resolutions */ + {2400,1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */ + {16, 12, 8, 0}, /* possible depths in gray mode */ + {16, 12, 8, 0}, /* possible depths in color mode */ + + SANE_FIX (0.5), /* Start of scan area in mm (x) */ + SANE_FIX (8.0), /* Start of scan area in mm (y) */ + SANE_FIX (218.0), /* Size of scan area in mm (x) */ + SANE_FIX (299.0), /* Size of scan area in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in mm (y) */ + SANE_FIX (9.5), /* Start of black mark in mm (x) */ + + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ + SANE_FIX (0.0), /* Size of scan area in TA mode in mm (x) */ + SANE_FIX (0.0), /* Size of scan area in TA mode in mm (y) */ + + SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ + + 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ + 0, /* CCD distcance for CCD with 6 lines) */ + + COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ + {0x19, 0x1a, 0x18, 0x14, 0x18, 0x12}, /* Default offset/gain */ + {0x548, 0x513, 0x48d}, /* Default exposure parameters */ + SANE_FIX (1.5), /* Default gamma value */ + + SANE_TRUE, /* Is this a CIS scanner? */ + GT68XX_FLAG_ALWAYS_LINEMODE | GT68XX_FLAG_SE_2400 +}; +/* tested by Aleksey Nedorezov <aleksey at nedorezov.com> */ + + + + +static GT68xx_USB_Device_Entry gt68xx_usb_device_list[] = { + {0x10000, 0x10000, &unknown_model}, /* used for yet unknown scanners */ + {0x055f, 0x0218, &mustek_2400ta_model}, + {0x055f, 0x0219, &mustek_2400taplus_model}, + {0x055f, 0x021c, &mustek_1200cuplus_model}, + {0x055f, 0x021b, &mustek_1200cuplus2_model}, + {0x055f, 0x021d, &mustek_2400cuplus_model}, + {0x055f, 0x021e, &mustek_1200ta_model}, + {0x055f, 0x021f, &mustek_scanexpress1248ub_model}, + {0x05d8, 0x4002, &mustek_1200cu_model}, + {0x05d8, 0x4002, &mustek_scanexpress1200ubplus_model}, /* manual override */ + {0x05d8, 0x4002, &artec_ultima2000_model}, /* manual override */ + {0x05d8, 0x4002, &mustek_2400cu_model}, /* manual override */ + {0x05d8, 0x4002, &mustek_scanexpress2400usb_model}, /* manual override */ + {0x055f, 0x0210, &mustek_a3usb_model}, + {0x055f, 0x021a, &mustek_2448taplus_model}, + {0x043d, 0x002d, &lexmark_x73_model}, + {0x07b3, 0x0400, &plustek_op1248u_model}, + {0x07b3, 0x0401, &plustek_op1248u_model}, /* Same scanner, different id? */ + {0x07b3, 0x0402, &plustek_u16b_model}, + {0x07b3, 0x0403, &plustek_u16b_model}, /* two ids? 403 seems to be more common */ + {0x07b3, 0x040b, &plustek_ops12_model}, + {0x07b3, 0x040e, &plustek_ops24_model}, + {0x07b3, 0x0412, &plustek_opticslim_m12_model}, + {0x07b3, 0x0413, &plustek_opticslim1200_model}, + {0x07b3, 0x0422, &plustek_opticslim2400_model}, + {0x07b3, 0x045f, &iriscan_express_2_model}, + {0x0458, 0x2011, &genius_vivid3x_model}, + {0x0458, 0x2014, &genius_vivid4_model}, + {0x0458, 0x2017, &genius_vivid3xe_model}, + {0x0458, 0x201a, &genius_vivid4xe_model}, + {0x0458, 0x201b, &genius_vivid4x_model}, + {0x0458, 0x201d, &genius_vivid1200x_model}, + {0x0458, 0x201f, &genius_vivid1200xe_model}, + {0x0458, 0x2021, &genius_sf600_model}, + {0x04a7, 0x0444, &visioneer_onetouch_7300_model}, + {0x0458, 0x201E, &genius_colorpageslim_1200_model}, + {0, 0, NULL} +}; |