summaryrefslogtreecommitdiff
path: root/backend/pixma_bjnp.c
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2017-07-15 11:25:39 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2017-07-15 11:25:39 +0200
commit1edb02101a9306fc711cd422ed507d18165b1691 (patch)
treebd2d48a139bfbe869f4f49359b63097931a45e7b /backend/pixma_bjnp.c
parent2ca8a81bd0d99fe4d75c229d0e988d8ef710285f (diff)
move from support/1.0.27 to feature/1.0.27
Diffstat (limited to 'backend/pixma_bjnp.c')
-rw-r--r--backend/pixma_bjnp.c183
1 files changed, 125 insertions, 58 deletions
diff --git a/backend/pixma_bjnp.c b/backend/pixma_bjnp.c
index 7d2d541..fc4c501 100644
--- a/backend/pixma_bjnp.c
+++ b/backend/pixma_bjnp.c
@@ -85,7 +85,7 @@
#ifdef HAVE_IFADDRS_H
#include <ifaddrs.h>
#endif
-#ifdef HAVE_SYS_SELSECT_H
+#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#ifdef HAVE_PWD_H
@@ -395,18 +395,19 @@ determine_scanner_serial (const char *hostname, const char * mac_address, char *
/* if we only have a literal ipv6 address, we use the mac-address */
strcpy(copy, hostname);
- while (strlen (copy) >= SHORT_HOSTNAME_MAX)
+ if (strlen (copy) >= SERIAL_MAX)
{
+ /* make the string fit into the serial */
/* if this is a FQDN, not an ip-address, remove domain part of the name */
if ((dot = strchr (copy, '.')) != NULL)
{
*dot = '\0';
}
- else
- {
- strcpy(copy, mac_address);
- break;
- }
+ }
+ /* check if name is still to long. If so use the mac-address */
+ if (strlen(copy) >= SERIAL_MAX)
+ {
+ strcpy(copy, mac_address);
}
strcpy( serial, copy );
return serial;
@@ -566,6 +567,7 @@ split_uri (const char *devname, char *method, char *host, char *port,
return -1;
}
strcpy(port, start);
+ start = end_of_port + 1;
}
/*
@@ -613,7 +615,6 @@ set_cmd_for_dev (int devno, struct BJNP_command *cmd, char cmd_code, int payload
/*
* Set command buffer with command code, session_id and length of payload
* Returns: sequence number of command
- * If devno < 0, then use devno as negativ index into bjnp_protocol_defs
*/
strncpy (cmd->BJNP_id, device[devno].protocol_string, sizeof (cmd->BJNP_id));
@@ -706,8 +707,8 @@ udp_command (const int dev_no, char *command, int cmd_len, char *response,
FD_ZERO (&fdset);
FD_SET (sockfd, &fdset);
- timeout.tv_sec = BJNP_TIMEOUT_UDP;
- timeout.tv_usec = 0;
+ timeout.tv_sec = device[dev_no].bjnp_timeout /1000;
+ timeout.tv_usec = device[dev_no].bjnp_timeout %1000;
}
while (((result =
select (sockfd + 1, &fdset, NULL, NULL, &timeout)) <= 0)
@@ -737,7 +738,7 @@ udp_command (const int dev_no, char *command, int cmd_len, char *response,
close(sockfd);
PDBG (bjnp_dbg
- (LOG_CRIT, "udp_command: ERROR - no data received\n" ) );
+ (LOG_CRIT, "udp_command: ERROR - no data received (timeout = %d)\n", device[dev_no].bjnp_timeout ) );
return -1;
}
@@ -807,7 +808,7 @@ get_scanner_name(const bjnp_sockaddr_t *scanner_sa, char *host)
{
/*
* Parse identify command responses to ip-address
- * and hostname
+ * and hostname. Return qulity of the address
*/
struct addrinfo *results;
@@ -1423,8 +1424,8 @@ bjnp_recv_header (int devno, size_t *payload_size )
FD_ZERO (&input);
FD_SET (fd, &input);
- timeout.tv_sec = BJNP_TIMEOUT_TCP;
- timeout.tv_usec = 0;
+ timeout.tv_sec = device[devno].bjnp_timeout /1000;
+ timeout.tv_usec = device[devno].bjnp_timeout %1000;
}
while ( ( (result = select (fd + 1, &input, NULL, NULL, &timeout)) <= 0) &&
(errno == EINTR) && (attempt++ < BJNP_MAX_SELECT_ATTEMPTS));
@@ -1442,7 +1443,8 @@ bjnp_recv_header (int devno, size_t *payload_size )
{
terrno = errno;
PDBG (bjnp_dbg (LOG_CRIT,
- "bjnp_recv_header: ERROR - could not read response header (select timed out)!\n" ) );
+ "bjnp_recv_header: ERROR - could not read response header (select timed out after %d ms)!\n",
+ device[devno].bjnp_timeout ) );
errno = terrno;
return SANE_STATUS_IO_ERROR;
}
@@ -1502,7 +1504,7 @@ bjnp_recv_header (int devno, size_t *payload_size )
}
static int
-bjnp_init_device_structure(int dn, bjnp_sockaddr_t *sa, bjnp_protocol_defs_t *protocol_defs)
+bjnp_init_device_structure(int dn, bjnp_sockaddr_t *sa, bjnp_protocol_defs_t *protocol_defs, int min_timeout)
{
/* initialize device structure */
@@ -1524,7 +1526,8 @@ bjnp_init_device_structure(int dn, bjnp_sockaddr_t *sa, bjnp_protocol_defs_t *pr
device[dn].address_level = get_scanner_name(sa, name);
device[dn].session_id = 0;
device[dn].serial = -1;
- device[dn].bjnp_timeout = 0;
+ device[dn].bjnp_timeout = min_timeout;
+ device[dn].bjnp_min_timeout = min_timeout;
device[dn].scanner_data_left = 0;
device[dn].last_cmd = 0;
device[dn].blocksize = BJNP_BLOCKSIZE_START;
@@ -1597,8 +1600,8 @@ bjnp_recv_data (int devno, SANE_Byte * buffer, size_t start_pos, size_t * len)
/* wait for data to be received, retry on a signal being received */
FD_ZERO (&input);
FD_SET (fd, &input);
- timeout.tv_sec = BJNP_TIMEOUT_TCP;
- timeout.tv_usec = 0;
+ timeout.tv_sec = device[devno].bjnp_timeout /1000;
+ timeout.tv_usec = device[devno].bjnp_timeout %1000;
}
while (((result = select (fd + 1, &input, NULL, NULL, &timeout)) <= 0) &&
(errno == EINTR) && (attempt++ < BJNP_MAX_SELECT_ATTEMPTS));
@@ -1617,7 +1620,8 @@ bjnp_recv_data (int devno, SANE_Byte * buffer, size_t start_pos, size_t * len)
{
terrno = errno;
PDBG (bjnp_dbg (LOG_CRIT,
- "bjnp_recv_data: ERROR - could not read response payload (select timed out)!\n") );
+ "bjnp_recv_data: ERROR - could not read response payload (select timed out after %d ms)!\n",
+ device[devno].bjnp_timeout) );
errno = terrno;
*len = 0;
return SANE_STATUS_IO_ERROR;
@@ -1643,7 +1647,7 @@ bjnp_recv_data (int devno, SANE_Byte * buffer, size_t start_pos, size_t * len)
static BJNP_Status
bjnp_allocate_device (SANE_String_Const devname,
- SANE_Int * dn, char *res_host)
+ SANE_Int * dn, char *resulting_host)
{
char method[BJNP_METHOD_MAX];
char host[BJNP_HOST_MAX];
@@ -1654,6 +1658,7 @@ bjnp_allocate_device (SANE_String_Const devname,
struct addrinfo hints;
int result;
int i;
+ int min_timeout = BJNP_TIMEOUT_DEFAULT;
PDBG (bjnp_dbg (LOG_DEBUG, "bjnp_allocate_device(%s) %d\n", devname, bjnp_no_devices));
@@ -1662,20 +1667,29 @@ bjnp_allocate_device (SANE_String_Const devname,
return BJNP_STATUS_INVAL;
}
- if (strlen (args) != 0)
+ if (strlen (args) > 0)
{
- PDBG (bjnp_dbg
- (LOG_CRIT,
- "bjnp_allocate_device: ERROR - URI may not contain userid, password or aguments: %s\n",
- devname));
+ /* get device specific timeout if any */
+
+ if (strncmp(args, "timeout=", strlen("timeout=")) == 0)
+ {
+ min_timeout = atoi(args + strlen("timeout="));
+ if (min_timeout < BJNP_TIMEOUT_DEFAULT)
+ min_timeout = BJNP_TIMEOUT_DEFAULT;
+ } else {
+ PDBG (bjnp_dbg
+ (LOG_CRIT,
+ "bjnp_allocate_device: ERROR - Unrecognized argument: %s\n",
+ devname));
return BJNP_STATUS_INVAL;
+ }
}
if ( (protocol_defs = get_protocol_by_method(method)) == NULL)
{
PDBG (bjnp_dbg
- (LOG_CRIT, "bjnp_allocate_device: ERROR - URI %s contains invalid method: %s\n", devname,
- method));
+ (LOG_CRIT, "bjnp_allocate_device: ERROR - URI %s contains invalid method: %s\n",
+ devname, method));
return BJNP_STATUS_INVAL;
}
@@ -1715,24 +1729,26 @@ bjnp_allocate_device (SANE_String_Const devname,
{
PDBG (bjnp_dbg
(LOG_CRIT,
- "bjnp_allocate_device: WARNING - Too many devices, ran out of device structures, can not add %s\n",
+ "bjnp_allocate_device: WARNING - Too many devices, ran out of device structures, cannot add %s\n",
devname));
freeaddrinfo(res);
return BJNP_STATUS_INVAL;
}
if (bjnp_init_device_structure( bjnp_no_devices, (bjnp_sockaddr_t *)cur -> ai_addr,
- protocol_defs) != 0)
+ protocol_defs, min_timeout) != 0)
{
/* giving up on this address, try next one if any */
break;
}
for (i = 0; i < bjnp_no_devices; i++)
{
- /* we check for matching addresses as wel as matching mac_addresses as */
- /* an IPv6 host can have multiple adresses */
- if ( (sa_is_equal( device[i].addr, (bjnp_sockaddr_t *)cur -> ai_addr) ) ||
- ( strcmp( device[i].mac_address, device[bjnp_no_devices].mac_address ) == 0 ) )
+ /* Check if found the scanner before, if so we use the best address
+ * but still make sure the scanner is listed only once.
+ * We check for matching addresses as wel as matching mac_addresses as
+ * an IPv6 host can have multiple adresses */
+
+ if ( strcmp( device[i].mac_address, device[bjnp_no_devices].mac_address ) == 0 )
{
if ( device[i].address_level < device[bjnp_no_devices].address_level )
{
@@ -1742,6 +1758,16 @@ bjnp_allocate_device (SANE_String_Const devname,
device[bjnp_no_devices].addr = NULL;
device[i].address_level = device[bjnp_no_devices].address_level;
}
+
+ /* check if new timeout value was defined (e.g. from sanei_bjnp_device_open)
+ * if so, use new timout value */
+
+ if (device[i].bjnp_min_timeout < device[bjnp_no_devices].bjnp_min_timeout)
+ {
+ /* use the longer timeout as requested */
+ device[i].bjnp_timeout = device[bjnp_no_devices].bjnp_min_timeout;
+ device[i].bjnp_min_timeout = device[bjnp_no_devices].bjnp_min_timeout;
+ }
freeaddrinfo(res);
*dn = i;
bjnp_free_device_structure( bjnp_no_devices);
@@ -1754,17 +1780,17 @@ bjnp_allocate_device (SANE_String_Const devname,
PDBG (bjnp_dbg (LOG_INFO, "bjnp_allocate_device: Scanner not yet in our list, added it: %s:%s\n", host, port));
- /* return hostname if required */
+ /* Commit new device structure */
- if (res_host != NULL)
- {
- strcpy (res_host, host);
- }
*dn = bjnp_no_devices;
+ bjnp_no_devices++;
- /* Commit new device structure */
+ /* return hostname if required */
- bjnp_no_devices++;
+ if (resulting_host != NULL)
+ {
+ strcpy (resulting_host, host);
+ }
return BJNP_STATUS_GOOD;
}
@@ -1800,10 +1826,11 @@ static void add_scanner(SANE_Int *dev_no,
*/
determine_scanner_serial (scanner_host, device[*dev_no].mac_address, serial);
+
attach_bjnp (uri, makemodel,
serial, pixma_devices);
- PDBG (bjnp_dbg (LOG_NOTICE, "add_scanner: New scanner at %s added!\n",
- uri));
+ PDBG (bjnp_dbg (LOG_NOTICE, "add_scanner: New scanner added: %s, serial %s, mac addres: %s.\n",
+ uri, serial, device[*dev_no].mac_address));
}
break;
case BJNP_STATUS_ALREADY_ALLOCATED:
@@ -1818,6 +1845,34 @@ static void add_scanner(SANE_Int *dev_no,
}
}
+int rewrite_uri(char *uri, int timeout, int max_len)
+{
+ char method[BJNP_METHOD_MAX];
+ char host[BJNP_HOST_MAX];
+ char port_str[BJNP_PORT_MAX];
+ char args[BJNP_HOST_MAX];
+ int port;
+
+ if (split_uri(uri, method, host, port_str, args ) != 0)
+ {
+ return -1;
+ }
+
+ port = atoi(port_str);
+ if (port == 0)
+ {
+ port = 8612;
+ }
+
+ if (strstr(args, "timeout=") == NULL)
+ {
+ sprintf(args, "timeout=%d", timeout);
+ }
+
+ snprintf(uri, max_len -1, "bjnp://%s:%d/%s", host, port, args);
+ return 0;
+}
+
/*
* Public functions
@@ -1870,6 +1925,7 @@ sanei_bjnp_find_devices (const char **conf_devices,
char uri[256];
int dev_no;
int port;
+ int timeout_default = BJNP_TIMEOUT_DEFAULT;
bjnp_sockaddr_t broadcast_addr[BJNP_SOCK_MAX];
bjnp_sockaddr_t scanner_sa;
socklen_t socklen;
@@ -1885,16 +1941,30 @@ sanei_bjnp_find_devices (const char **conf_devices,
{
socket_fd[i] = -1;
}
- /* First add devices from config file */
+
+ /* Add devices from config file */
if (conf_devices[0] == NULL)
PDBG (bjnp_dbg( LOG_DEBUG, "sanei_bjnp_find_devices: No devices specified in configuration file.\n" ) );
for (i = 0; conf_devices[i] != NULL; i++)
{
+ if (strncmp(conf_devices[i], "bjnp-timeout=", strlen("bjnp-timeout="))== 0)
+ {
+ timeout_default = atoi(conf_devices[i] + strlen("bjnp-timeout=") );
+ if (timeout_default < BJNP_TIMEOUT_DEFAULT)
+ {
+ timeout_default = BJNP_TIMEOUT_DEFAULT;
+ }
+ PDBG ( bjnp_dbg
+ (LOG_DEBUG, "Set new default timeout value: %d ms.", timeout_default));
+ continue;
+ }
PDBG (bjnp_dbg
(LOG_DEBUG, "sanei_bjnp_find_devices: Adding scanner from pixma.conf: %s\n", conf_devices[i]));
- add_scanner(&dev_no, conf_devices[i], attach_bjnp, pixma_devices);
+ strncpy(uri, conf_devices[i], sizeof(uri));
+ rewrite_uri(uri, timeout_default, sizeof(uri));
+ add_scanner(&dev_no, uri, attach_bjnp, pixma_devices);
}
PDBG (bjnp_dbg
(LOG_DEBUG,
@@ -2062,8 +2132,8 @@ sanei_bjnp_find_devices (const char **conf_devices,
get_scanner_name( &scanner_sa, scanner_host);
/* construct URI */
- sprintf (uri, "%s://%s:%d", protocol_defs->method_string, scanner_host,
- port);
+ sprintf (uri, "%s://%s:%d/timeout=%d", protocol_defs->method_string, scanner_host,
+ port, timeout_default);
add_scanner( &dev_no, uri, attach_bjnp, pixma_devices);
@@ -2182,8 +2252,15 @@ sanei_bjnp_deactivate (SANE_Int dn)
extern void
sanei_bjnp_set_timeout (SANE_Int devno, SANE_Int timeout)
{
- PDBG (bjnp_dbg (LOG_INFO, "bjnp_set_timeout to %d\n",
+ if (timeout < device[devno].bjnp_min_timeout)
+ {
+ PDBG (bjnp_dbg (LOG_INFO, "bjnp_set_timeout to %d, but using minimum value %d\n",
+ timeout, device[devno].bjnp_min_timeout));
+ timeout = device[devno].bjnp_min_timeout;
+ } else {
+ PDBG (bjnp_dbg (LOG_INFO, "bjnp_set_timeout to %d\n",
timeout));
+ }
device[devno].bjnp_timeout = timeout;
}
@@ -2460,16 +2537,6 @@ sanei_bjnp_read_int (SANE_Int dn, SANE_Byte * buffer, size_t * size)
if ( resp_len > 0 )
{
device[dn].polling_status = BJNP_POLL_STATUS_RECEIVED;
-
- /* this is a bit of a hack, but the scanner does not like */
- /* us to continue using the existing tcp socket */
-
- /* No longer required? Does not work anymore now we moved code from sanei_bjnp_activate/sanei_bjnp_deactivate
- to the isanei_bjnp_open and sanei_bjnp_close
- sanei_bjnp_deactivate(dn);
- sanei_bjnp_activate(dn);
- */
-
return SANE_STATUS_GOOD;
}
seconds = timeout > 2 ? 2 : timeout;