Imported Upstream version 1.0.24upstream/1.0.24

1 files changed, 0 insertions, 2282 deletions

diff --git a/debian/changelog b/debian/changelog
deleted file mode 100644
index 8b9cc16..0000000
--- a/debian/changelog
+++ /dev/null
@@ -1,2282 +0,0 @@
-sane-backends (1.0.24-1.2) unstable; urgency=medium
-
-  * Non-maintainer upload.
-  * update config.* without dh-autoreconf because of local patches
-    to build on ppc64el. Closes: #759289
-
- -- Andreas Barth <aba@ayous.org>  Sat, 30 Aug 2014 11:57:08 +0000
- 
-sane-backends (1.0.24-1.1) unstable; urgency=medium
-
-  * Non-maintainer upload.
-  * Fix FTBFS for binary-arch builds:
-    + Install examples through debian/libsane-common.examples.
-    + Use proper source paths for sane.ps and backend-writing.txt;
-      also fix the source path for the HTML files installed into
-      libsane-common.
-  * Clean up debian/changelog.
-
- -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>  Sat, 18 Jan 2014 21:07:24 +0100
-
-sane-backends (1.0.24-1) unstable; urgency=low
-
-  * New upstream release.
-  * New maintainer. (Closes: #688531)
-  * Disable USB testing since it (probably) doesn't work on autobuilders.
-  * Fixed a bunch of lintian warnings.
-  * Change architecture for libsane-common from "any" to "all".
-
- -- Mark Buda <hermit@acm.org>  Sun, 24 Nov 2013 10:05:18 -0500
-
-sane-backends (1.0.23-3) unstable; urgency=low
-
-  * QA upload.
-  * Revert move to libtiff5-dev.
-
- -- Rene Engelhard <rene@debian.org>  Sat, 06 Jul 2013 15:20:16 +0200
-
-sane-backends (1.0.23-2) unstable; urgency=low
-
-  * QA upload.
-  * Add sane-desc.c_debian_mods.patch to series file. (Closes: #714993)
-
- -- Markus Koschany <apo@gambaru.de>  Fri, 05 Jul 2013 11:52:37 +0200
-
-sane-backends (1.0.23-1) unstable; urgency=low
-
-  * QA upload.
-  * Upload to unstable.
-  * This package has been orphaned. Set maintainer to the Debian QA Group.
-  * Bump compat level to 9 (was 5) and require debhelper >= 9.
-  * debian/control:
-    + sane-utils: Inherit Section: graphics from source package sane-backends.
-    + Remove versioned dependencies. They are trivially satisfied.
-  * Drop the following patches. They are merged upstream now.
-    + fix_v4l_build.patch
-    + hurd_path_max_fix.patch
-    + sane_desc_udev+acl.patch
-    + scanimage_man_batch_start.patch
-    + udev_usb_suspend.patch
-    + xerox_mfp_add_scx_4623fw.patch
-    + xerox_mfp_fix_usb_device.patch
-  * Drop disable_rpath.patch because the RPATH is already removed by chrpath
-    in debian/rules.
-  * Rebase and refresh all other patches against the new upstream relase.
-  * debian/rules:
-    + Simplify debian/rules by using dh sequencer.
-    + Build with --parallel and with autotools_dev.
-    + Enable all hardening build flags.
-    + Install umax_pp with sane-utils.install.
-  * Build-Depend on libtiff5-dev. Thanks to Michael Terry for the patch.
-    (Closes: #681079)
-  * Build-Depend on libusb-1.0-0-dev and enable libusb1.0 support in
-    debian/rules. Thanks to Martin Pitt for the report and Whoopie for the
-    patch. (Closes: #687137)
-
- -- Markus Koschany <apo@gambaru.de>  Thu, 04 Jul 2013 17:41:47 +0200
-
-sane-backends (1.0.23-0.1~experimental1) experimental; urgency=low
-
-  * Non-maintainer upload.
-  * New upstream release.
-
- -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>  Sat, 23 Feb 2013 20:12:58 +0100
-
-sane-backends (1.0.22-7.4) unstable; urgency=low
-
-  * Non-maintainer upload.
-  * Compress all binaries with xz to free up some space on CD#1.
-
- -- Cyril Brulebois <kibi@debian.org>  Mon, 17 Sep 2012 16:44:07 +0200
-
-sane-backends (1.0.22-7.3) unstable; urgency=low
-
-  * Non-maintainer upload.
-  * Fix build failure on kfreebsd. (Closes: #680234)
-
- -- Michael Gilbert <mgilbert@debian.org>  Sun, 15 Jul 2012 17:07:15 -0400
-
-sane-backends (1.0.22-7.2) unstable; urgency=low
-
-  * Non-maintainer upload.
-  * Set sane-utils as 'Multi-Arch: foreign'. (Closes: #675797)
-
- -- Michael Gilbert <mgilbert@debian.org>  Thu, 28 Jun 2012 16:53:15 -0400
-
-sane-backends (1.0.22-7.1) unstable; urgency=low
-
-  * Non-maintainer upload.
-  * Fix pending l10n issues. Debconf translations:
-    + Catalan; (Innocent De Marchi). (Closes: #646505)
-    + Slovak (Slavko). (Closes: #639235)
-    + Polish (Michał Kułach). (Closes: #658351)
-
- -- Christian Perrier <bubulle@debian.org>  Wed, 28 Mar 2012 07:39:00 +0200
-
-sane-backends (1.0.22-7) unstable; urgency=low
-
-  * debian/patches/sane-desc.c_debian_mods.patch:
-    + Updated; do not output a timestamp as part of the udev rules file
-      header, it is a source of conflict for MultiArch.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 21 Nov 2011 15:39:26 +0100
-
-sane-backends (1.0.22-6) unstable; urgency=low
-
-  * debian/control:
-    + Fix ibcam-dev -> libcam-dev typo.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 21 Jul 2011 17:54:48 +0200
-
-sane-backends (1.0.22-5) unstable; urgency=low
-
-  * debian/control:
-    + Replace explicit architecture lists with appropriate architecture
-      wildcards; patch from Robert Millan. (Closes: #634518)
-    + Use kfreebsd-any architecture wildcard for libcam-dev in libsane-dev's
-      Depends field, getting rid of the custom libcam-dev substvar.
-    + Use linux-any architecture wildcard for udev | makedev, acl in libsane's
-      Depends field, gettind rid of the custom udev substvar.
-  * debian/rules:
-    + Remove custom libcam-dev and udev substvars in dh_gencontrol call.
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 20 Jul 2011 19:52:51 +0200
-
-sane-backends (1.0.22-4) unstable; urgency=low
-
-  * Convert for MultiArch.
-  * debian/control:
-    + Bump debhelper build-dep to >= 8.1.3 for multiarch.
-    + Add Pre-Depends: ${misc:Pre-Depends} to libsane.
-    + Tag libsane with Multi-Arch: same.
-    + New Multi-Arch: foreign libsane-common binary package.
-    + Add libsane-common dependency to libsane.
-  * debian/rules:
-    + Use multiarch path.
-    + libsane.install.in is now libsane-common.install.in.
-    + libsane.docs is gone.
-    + Create the multiarch pkgconfig directory and install the .pc file here.
-    + Stop creating the gt68xx firmware directory in libsane.
-    + Move HAL FDI file to libsane-common.
-    + Disable SNMP support explicitly (needs Net-SNMP 5.6).
-  * debian/libsane-dev.install:
-    + Adapt for multiarch.
-  * debian/libsane.install.in -> debian/libsane.install:
-    + Adapt for multiarch, transfer multiarch-incompatible content to
-      libsane-common.
-  * debian/libsane-common.install.in:
-    + Adopt multiarch-incompatible content previously found in libsane.
-  * debian/libsane.links -> debian/libsane-common.links:
-    + Transfer documentation symlinks to libsane-common.
-  * debian/libsane-dev.dirs:
-    + Removed; pkgconfig directory created in debian/rules.
-  * debian/patches/multiarch_dll_search_path.patch:
-    + Added; make /usr/lib/arch_triplet/sane the default location for SANE
-      backends but keep /usr/lib/sane as a fallback for now.
-  * debian/patches/multiarch_manpages_libdir.patch:
-    + Added; use a generic /usr/lib/arch_triplet/sane path for backend
-      location in the man pages (otherwise substituted from LIBDIR).
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 13 Jun 2011 17:07:05 +0200
-
-sane-backends (1.0.22-3) unstable; urgency=low
-
-  * debian/control:
-    + Bump Standards-Version to 3.9.2 (no changes).
-  * debian/libsane.NEWS:
-    + Added; document the switch to ACLs starting with 1.0.22-1.
-  * debconf translations:
-    + pt_BR.po: update from Eder L. Marques. (Closes: #619612)
-    + nl.po: courtesy of Jeroen Schot. (Closes: #627043)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 02 Jun 2011 14:57:53 +0200
-
-sane-backends (1.0.22-2) unstable; urgency=low
-
-  * debian/patches/udev_usb_suspend.patch:
-    + Added; switch to using power/control instead of power/level for
-      device power setting, if available.
-  * debian/patches/xerox_mfp_fix_usb_devices.patch:
-    + Added; fix detection/handling of USB devices in xerox_mfp.
-      (Closes: #617307)
-  * debian/patches/xerox_mfp_add_scx_4623fw.patch:
-    + Added; add IDs for the Samsung SCX-4623FW.
-  * debian/patches/hurd_path_max_fix.patch:
-    + Added; fix build on HURD where PATH_MAX is not defined.
-      (Closes: #616299)
-  * debian/patches/scanimage_man_batch_start.patch:
-    + Added; fix improper documentation of --batch-start. (Closes: #614009)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 12 Mar 2011 11:32:32 +0100
-
-sane-backends (1.0.22-1) unstable; urgency=low
-
-  * New upstream release.
-    + epson2: reject scan area settings that would lead to a division by zero.
-      (Closes: #581181)
-  * debian/control:
-    + Bump Standards-Version to 3.9.1 (no changes).
-    + Demote libsane-extras-* to Recommends again.
-  * debian/rules:
-    + Add acl (>= 2.2.49-4) to udev substvar for ACL utilities in /bin.
-    + Use sane-desc -m udev+acl. (Closes: #591767, #612815)
-  * debian/libsane.README.Debian:
-    + Update; mention ConsoleKit and the udev rules now using ACLs.
-
-  * debian/patches/sane-desc_udev+acl.patch:
-    + Added; compared to experimental, setfacl is now in /bin.
-  * debian/patches/fix_xerox_mfp_color_mode.patch,
-    debian/patches/use_libsane_matched_for_scsi.patch,
-    debian/patches/allow_dll.d_symlinks.patch,
-    debian/patches/saned_exit_avahi_process.patch,
-    debian/patches/xerox_mfp_new_ids.patch,
-    debian/patches/scsi_perfection_2450.patch,
-    debian/patches/scsi_scanjet_4c.patch,
-    debian/patches/genesys_disable_raw_data_log.patch,
-    debian/patches/fix_epson2_commands.patch,
-    debian/patches/fix_epson2_cancel.patch:
-    - removed; merged upstream.
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 16 Feb 2011 19:00:55 +0100
-
-sane-backends (1.0.22~git1.0.21-157-g126c70d-1) experimental; urgency=low
-
-  * Git snapshot.
-  * debian/rules:
-    + Add dependency on acl to libsane when depending on udev.
-    + Use udev+acl mode when generating udev rules.
-  + debian/patches/sane-desc_udev+acl.patch:
-    + Added; try using ACLs for USB scanners in an effort to deconflict with
-      MFP devices.
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 21 Jul 2010 18:36:37 +0200
-
-sane-backends (1.0.22~git1.0.21-87-g323ed01-1) experimental; urgency=low
-
-  * Git snapshot.
-    + genesys now has some support for LiDE 100 & 200. (Closes: #586189)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 23 Jun 2010 18:37:59 +0200
-
-sane-backends (1.0.21-9) unstable; urgency=low
-
-  * debian/patches/fix_epson2_cancel.patch:
-    + Added; fix handling of scanner errors by sending a cancel command.
-      (Closes: #597922)
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 12 Dec 2010 16:31:25 +0100
-
-sane-backends (1.0.21-8) unstable; urgency=low
-
-  * debian/patches/fix_epson2_commands.patch:
-    + Added; fix list of supported commands for levels D1 and D2.
-      (Closes: #582066)
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 29 Nov 2010 18:12:16 +0100
-
-sane-backends (1.0.21-7) unstable; urgency=low
-
-  * debian/patches/genesys_disable_raw_data_log.patch:
-    + Added; disable raw data logging. Raw data logging was enabled
-      upstream at some point before 1.0.21 most probably as an oversight
-      when committing new code. When enabled, a raw.pnm file is left
-      behind in the cwd when using the genesys backend. (Closes: #602995)
-  * debconf translations:
-    + Properly install vi.po, mistakenly put in po/ instead of
-      debian/po in 1.0.21-6.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 15 Nov 2010 19:00:34 +0100
-
-sane-backends (1.0.21-6) unstable; urgency=low
-
-  * debian/patches/saned_exit_avahi_process.patch:
-    + Added; exit Avahi process on error/loop termination.
-  * debian/patches/xerox_mfp_new_ids.patch:
-    + Added; add USB IDs for supported machines in xerox_mfp. (Closes: #601748)
-  * debian/patches/scsi_perfection_2450.patch:
-    + Added; add SCSI IDs for the Perfection 2450 via FireWire.
-      (Closes: #601810)
-  * debian/patches/scsi_scanjet_4c.patch:
-    + Added; add SCSI IDs for the ScanJet 4c. (Closes: #601656)
-  * debconf translations:
-    + vi.po: courtesy of Clytie Siddall. (Closes: #601530)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 06 Nov 2010 11:21:40 +0100
-
-sane-backends (1.0.21-5) unstable; urgency=low
-
-  * debconf translations:
-    + cs.po: courtesy of Miroslav Kure. (Closes: #598338)
-    + zh_CN.po: courtesy of YunQiang Su (Closes: #599590, #599591).
-    + da.po: courtesy of Joe Dalton. (Closes: #599642)
-    + eu.po: courtesy of Iñaki Larrañaga Murgoitio. (Closes: #599810)
-    + es.po: courtesy of Camaleón. (Closes: #600342)
-    + fi.po: courtesy of Esko Arajärvi. (Closes: #600514)
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 18 Oct 2010 10:08:12 +0200
-
-sane-backends (1.0.21-4) unstable; urgency=low
-
-  * debconf translations:
-    + it.po: courtesy of Luca Monducci. (Closes: #593722)
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 05 Sep 2010 09:44:28 +0200
-
-sane-backends (1.0.21-3) unstable; urgency=low
-
-  * debian/control:
-    + Bump Standards-Version to 3.9.0 (no changes).
-  * debian/patches/use_libsane_matched_for_scsi.patch:
-    + Added; use libsane_matched for SCSI scanners rules too.
-  * debian/patches/allow_dll.d_symlinks.patch:
-    + Added; allow symlinks under /etc/sane.d/dll.d. (Closes: #588392)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 09 Jul 2010 18:21:58 +0200
-
-sane-backends (1.0.21-2) unstable; urgency=low
-
-  * debian/patches/fix_xerox_mfp_color_mode.patch:
-    + Added; fix xerox_mfp color mode, from upstream. (Closes: #583789)
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 01 Jun 2010 19:34:19 +0200
-
-sane-backends (1.0.21-1) unstable; urgency=low
-
-  * New upstream release. (Closes: #579254)
-  * Moved to source format 3.0 (quilt).
-  * debian/control:
-    + Removed dpatch build-dep.
-    + Add dependency on pkg-config to libsane-dev.
-  * debian/rules:
-    + Removed dpatch code.
-    + --disable-fork-process -> --enable-pthread.
-    + Install the pkg-config file for sane-backends.
-  * All patches refreshed, tagged with DEP-3 headers.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 26 Apr 2010 19:59:08 +0200
-
-sane-backends (1.0.20-14) unstable; urgency=low
-
-  * debian/control:
-    + Depend and build-depend on libjpeg-dev instead of libjpeg62-dev.
-      (Closes: #569240)
-    + Bump Standards-Version to 3.8.4 (no changes).
-  * debian/sane-utils.saned.init:
-    + Add $remote_fs to Required-Start & Required-Stop.
-  * debconf translations:
-    + fr.po: courtesy of Christian Perrier. (Closes: #564595)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 13 Feb 2010 10:03:12 +0100
-
-sane-backends (1.0.20-13) unstable; urgency=low
-
-  * debian/patches/34_genesys_gl841_cal_fix.dpatch:
-    + Added; fix calibration on gl841-based scanners. (Closes: #563163)
-  * debconf translations:
-    + ja.po: courtesy of Hideki Yamane. (Closes: #564294)
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 10 Jan 2010 15:21:22 +0100
-
-sane-backends (1.0.20-12) unstable; urgency=low
-
-  * debian/patches/33_epson2_update.dpatch:
-    + Update epson2 from git HEAD. (Closes: #534746)
-  * debconf translations:
-    + de.po: courtesy of Helge Kreutzmann. (Closes: #562709)
-    + sv.po: courtesy of Martin Bagge. (Closes: #562931)
-    + ru.po: courtesy of Yuri Kozlov. (Closes: #563076)
-    + pt.po: courtesy of Américo Monteiro. (Closes: #563174)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 01 Jan 2010 12:49:10 +0100
-
-sane-backends (1.0.20-11) unstable; urgency=medium
-
-  * Urgency set to medium to unbreak saned in testing.
-  * debian/patches/12_saned_polling_fix.dpatch:
-    + Added; unbreak saned's polling loop for more than 1 fds. (Closes: #562248)
-  * debian/patches/13_saned_aliasing_fix.dpatch:
-    + Added; fix strict aliasing issues in saned for gcc 4.4.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 24 Dec 2009 17:33:35 +0100
-
-sane-backends (1.0.20-10) unstable; urgency=low
-
-  * debian/libsane.README.Debian:
-    + Updated udev-related information and instructions, added a note about
-      only adding rules for scanners supported by libsane.
-  * debian/sane-utils.saned.init:
-    + Add missing --oknodo in s-s-d stop call in restart case.
-      (Closes: #558648)
-  * debian/sane-utils.templates:
-    + Rework the standalone saned template and mention Avahi explicitly.
-      (Closes: #556877)
-  * debian/patches/22_dll_backend_conf.dpatch:
-    + Updated; use better wording for the comment about the net backend
-      in dll.conf. (Closes: #556912)
-  * debian/patches/32_epson_perfection636.dpatch:
-    + Added; add the Epson Perfection 636 SCSI scanner. (Closes: #555971)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 12 Dec 2009 11:33:09 +0100
-
-sane-backends (1.0.20-9) unstable; urgency=low
-
-  * debian/patches/11_udev_147.dpatch:
-    + Added; remove NAME= from SCSI rules as udev 147 complains about it. Also
-      remove support for kernel < 2.6.22. (Closes: #555443)
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 09 Nov 2009 21:01:32 +0100
-
-sane-backends (1.0.20-8) unstable; urgency=low
-
-  * debian/rules:
-    + Fix nostrip builds, thanks to Tollef Fog Heen. (Closes: #548152)
-  * debian/patches/31_genesys_raw_log_fix.dpatch:
-    + Added; add missing check when logging raw data. Patch by
-      Tollef Fog Heen <tfheen@err.no>. (Closes: #548154)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 26 Sep 2009 11:44:04 +0200
-
-sane-backends (1.0.20-7) unstable; urgency=low
-
-  * debian/control:
-    + Demote avahi-daemon to a Suggests. (Closes: #543335)
-    + libv4l-dev is not available on hurd-i386 either. (Closes: #545995)
-  * debian/patches/30_xerox_samsung_ids.dpatch:
-    + Added; add USB IDs for various Samsung-branded MFPs. (Closes: #545290)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 11 Sep 2009 19:16:15 +0200
-
-sane-backends (1.0.20-6) unstable; urgency=low
-
-  * debian/control:
-    + Bump Standards-Version to 3.8.3 (no changes).
-  * debian/rules:
-    + Empty dependency_libs in all .la files.
-  * debian/patches/10_sanei_usb_update.dpatch:
-    + Added; from git, favour the interface detected by sanei_usb_init().
-      This helps with some machines like the Canon MP730.
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 29 Aug 2009 16:55:34 +0200
-
-sane-backends (1.0.20-5) unstable; urgency=low
-
-  * debian/control:
-    + Bump Standards-Version to 3.8.2 (no changes).
-  * debian/patches/08_cardscan_usbids.dpatch:
-    + Added; fix USB IDs for the CardScan 800c. (Closes: #528829)
-  * debian/patches/09_po_update_es_add_gl.dpatch:
-    + Added; update es translation and add new gl translation, courtesy of
-      Miguel Bouzada <mbouzada@gmail.com>.
-  * debian/patches/20_disable_rpath.dpatch:
-    + Added; do not use rpath. For some reason this decided to pop up now,
-      even though the previous revision of the package did not suffer from
-      this. Go figure.
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 26 Jun 2009 14:39:41 +0200
-
-sane-backends (1.0.20-4) unstable; urgency=low
-
-  * debian/rules:
-    + Serialize autotools/patch/configure for parallel builds, now that
-      parallel builds are possible with the upstream build system.
-      (Closes: #506620)
-  * debian/control:
-    + Bump libsane-extras dependencies to 1.0.20.1.
-  * debian/sane-utils.saned.init:
-    + Add status action, taken from iaxmodem. (Closes: #528265)
-  * debian/patches/07_tools_missing_libcam.dpatch:
-    + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI
-      libraries. From upstream via Aurélien JARNO. (Closes: #528594)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 14 May 2009 12:06:47 +0200
-
-sane-backends (1.0.20-3) unstable; urgency=low
-
-  * debian/patches/06_cap_always_settable.dpatch:
-    + Added; add back SANE_CAP_ALWAYS_SETTABLE which was mistakenly
-      removed from SANE 1.0.20. (Closes: #527675, #527682)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 08 May 2009 21:03:56 +0200
-
-sane-backends (1.0.20-2) unstable; urgency=low
-
-  * Update previous changelog entry with regard to #519101 resolution.
-  * debian/patches/04_udev_rules_fix.dpatch:
-    + Added; fix udev rules, use ATTRS instead of ATTR. (Closes: #527196)
-  * debian/patches/05_saned_avahi_fds_fix.dpatch:
-    + Added; fix a possible net backend hang when saned is run in debug
-      mode. Could also happen in standalone mode, but a lot less likely.
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 06 May 2009 12:02:59 +0200
-
-sane-backends (1.0.20-1) unstable; urgency=low
-
-  * New upstream release.
-    + Unsupported devices are no longer included in the udev rules.
-      (Closes: #519101)
-  * debian/control:
-    + Bump Standards-Version to 3.8.1 (no changes).
-    + Add build-dep on libv4l-dev.
-    + Add dependency on libv4l-dev to libsane-dev.
-    + Move libsane-dbg to debug section.
-  * debian/rules:
-    + Use DESTDIR at install time.
-    + Remove rpath from sane-find-scanner.
-  * debian/patches/01_missing_pthreads.dpatch:
-    + Added; new build system breaks build when using pthreads.
-  * debian/patches/02_frontends_libs.dpatch:
-    + Added; only link the frontends with the libraries they need.
-  * debian/patches/03_libsane_deps.dpatch:
-    + Added; reduce libsane.so deps to the bare minimum.
-  * debian/patches/11_minimum_linkage.dpatch:
-    + Removed; build system was redone using automake and this isn't
-      needed anymore.
-  * debian/patches/12_new_configure.dpatch:
-    + Removed; not needed anymore, due to #11 going away.
-  * debian/patches/21_sane-config.in_no_rpath.dpatch:
-    + Updated; updated for new build system.
-  * debian/patches/23_unneeded_doc.dpatch:
-    + Updated; updated for new build system.
-  * debian/patches/22_dll_backend_conf.dpatch:
-    + Updated; dll.d support has been merged upstream, update dll.conf header.
-  * debian/patches/01_manpages_fixes.dpatch, 02_pixma_update.dpatch,
-    03_snapscan_usb_ftok_fix.dpatch, 04_sane-desc_hal_new.dpatch,
-    05_hp_timing_fix.dpatch, 06_sanei_scsi_attach_fix.dpatch,
-    07_epson2_be_nice.dpatch, 08_epson2_be_nice_to_saned.dpatch,
-    09_avision_fixes.dpatch, 10_sm3840_unbreak_sane_open.dpatch,
-    30_new_saned.dpatch, 31_sanei_pthread_64bit_fix.dpatch,
-    32_net_backend_standard_fix.dpatch, 33_scanimage_options_fix.dpatch,
-    40_fujitsu_fixes.dpatch, 41_epjitsu_fixes.dpatch:
-    - removed; fixes and enhancements taken from upstream or merged upstream
-      in this release.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 04 May 2009 12:45:50 +0200
-
-sane-backends (1.0.19-26) unstable; urgency=low
-
-  * debian/rules:
-    + Do not generate /etc/modprobe.d/libsane anymore.
-  * debian/libsane.preinst:
-    + Remove obsolete /etc/modprobe.d/libsane conffile.
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; workaround for backends writing to stdin/stderr/stdout when
-      run via inetd, which breaks the network dialog and causes the remote
-      net backend to crash. (Closes: #516982)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 04 Mar 2009 10:49:42 +0100
-
-sane-backends (1.0.19-25) unstable; urgency=low
-
-  * debian/rules:
-    + Remove comment bit, breaking configure invocation.
-  * debian/control:
-    + Add ${misc:Depends}.
-  * debian/sane-utils.postrm:
-    + Make the script set -e.
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; (net backend) do not attempt to lock the Avahi polling
-      thread before stopping it, it now produces a deadlock. Looks like
-      a change/fix was made in Avahi. (Closes: #513122)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 18 Feb 2009 11:50:31 +0100
-
-sane-backends (1.0.19-24) unstable; urgency=low
-
-  * debian/rules:
-    + Enable use of pthread instead of fork for reader processes.
-  * debian/libsane.postinst:
-    + Remove code dealing with devfs/hotplug/hotplug-ng.
-  * debian/patches/11_minimum_linkage.dpatch:
-    + Update; add $(LIBPTHREAD) to library dependencies where needed.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 15 Feb 2009 11:50:13 +0100
-
-sane-backends (1.0.19-23) unstable; urgency=low
-
-  * debian/patches/09_avision_fixes.dpatch:
-    + Updated; fix reader task handling to not signal the whole process group
-      erroneously.
-  * debconf translations:
-    + it.po: courtesy of Luca Monducci. (Closes: #507563)
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 09 Dec 2008 16:14:06 +0100
-
-sane-backends (1.0.19-22) unstable; urgency=low
-
-  * debian/patches/41_epjitsu_fixes.dpatch:
-    + Added; from CVS, fix double-free issues in epjitsu. (Closes: #506750)
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 24 Nov 2008 15:02:04 +0100
-
-sane-backends (1.0.19-21) unstable; urgency=low
-
-  * debian/rules:
-    + Use an error handler for saned's init.
-  * debian/sane-utils.postinst:
-    + Added error handler for saned init. (Closes: #493745)
-  * debconf translations:
-    + es.po: courtesy of Ignacio Mondino. (Closes: #499202)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 19 Sep 2008 10:50:04 +0200
-
-sane-backends (1.0.19-20) unstable; urgency=low
-
-  * debian/control:
-    + Make sane-utils depend on update-inetd (>= 4.31) which won't break
-      with debconf.
-  * debian/sane-utils.postinst:
-    + update-inetd needs debconf sometimes, so keep debconf enabled until
-      after the update-inetd call.
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 05 Sep 2008 11:04:59 +0200
-
-sane-backends (1.0.19-19) unstable; urgency=low
-
-  * debian/rules:
-    + Install umax_pp into sane-utils. (Closes: #496833)
-  * debian/patches/40_fujitsu_fixes.dpatch:
-    + Added; upstream backport of fujitsu backend fixes, fixes a string
-      initialization issue in config file parsing, adds color mode for the
-      fi-6130, 6230, 6140, 6240 and fixes fi-6230 hangs at wakeup from
-      powersave mode. (Closes: #494156) Thanks to M. Allan Noah for
-      providing a backport.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 28 Aug 2008 10:31:35 +0200
-
-sane-backends (1.0.19-18) unstable; urgency=low
-
-  * debian/patches/10_sm3840_unbreak_sane_open.dpatch:
-    + Added; from CVS, fix the way sane_open() checks for sanei_usb_open()
-      errors. (Closes: #496249)
-  * debconf translations:
-    + ja.po: courtesy of Hideki Yamane. (Closes: #493568)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 27 Aug 2008 19:58:15 +0200
-
-sane-backends (1.0.19-17) unstable; urgency=low
-
-  * debian/patches/33_scanimage_options_fix.dpatch:
-    + Added; get the option descriptor for option 0 before getting the value
-      for option 0. This is a standard-compliance fix needed for proper
-      operation with the net backend.
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; fix initialization of runas_{g,u}id and ngroups, preventing
-      failures later on in some cases (saned -a without username).
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 05 Aug 2008 12:10:44 +0200
-
-sane-backends (1.0.19-16) unstable; urgency=low
-
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; Fix seteuid()/setegid() call order and set supplemental group
-      list. (Closes: #493084)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 31 Jul 2008 11:46:53 +0200
-
-sane-backends (1.0.19-15) unstable; urgency=low
-
-  * debian/patches/09_avision_fixes.dpatch:
-    + Enable this patch for real.
-  * debian/patches/31_sanei_pthread_64bit_fix.dpatch:
-    + Updated.
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 22 Jul 2008 23:05:50 +0200
-
-sane-backends (1.0.19-14) unstable; urgency=low
-
-  * debian/patches/32_net_backend_standard_fix.dpatch:
-    + Updated; fix sane_control_option() in the net backend so as to bring
-      the net backend behaviour back in line with standard backends. This
-      should fix some issues reported with the net backend lately.
-  * debian/patches/01_manpages_fixes.dpatch:
-    + Updated; fix some more hyphen vs. minus sign issues.
-  * debian/rules:
-    + Include debug symbols for sane-utils into libsane-dbg.
-  * debian/copyright:
-    + Update.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 20 Jul 2008 12:51:25 +0200
-
-sane-backends (1.0.19-13) unstable; urgency=low
-
-  * debian/libsane.README.Debian:
-    + Fix udev rules filename. (Closes: #490656)
-  * debian/patches/01_manpages_fixes.dpatch:
-    + Updated; fix hyphen vs. minus sign issues reported by lintian.
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; manpage fixes.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 14 Jul 2008 13:17:44 +0200
-
-sane-backends (1.0.19-12) unstable; urgency=low
-
-  * debian/control:
-    + Bump Standards-Version to 3.8.0 (no changes).
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; properly terminate child processes when exiting from the
-      debug mode.
-  * debian/patches/32_net_backend_standard_fix.dpatch:
-    + Added; do not reload the option descriptors cache behind the frontend's
-      back in sane_control_option(). Fetch options descriptors in sane_open()
-      so GET_VALUE on option 0 can still work without explicitely getting
-      option descriptor 0 first.
-  * debconf translations:
-    + sv.po: courtesy of Martin Bagge. (Closes: #487369)
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 24 Jun 2008 22:10:35 +0200
-
-sane-backends (1.0.19-11) unstable; urgency=low
-
-  * debian/patches/30_new_saned.dpatch:
-    + Updated; lock the Avahi thread before stopping it and tearing down the
-      Avahi objects. (Closes: #484464)
-  * debian/patches/09_avision_fixes.dpatch:
-    + Added; from CVS, misc avision backend fixes. (Closes: #474706, #475198)
-  * debconf translations:
-    + ru.po: courtesy of Yuri Kozlov. (Closes: #481656)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 06 Jun 2008 17:37:28 +0200
-
-sane-backends (1.0.19-10) unstable; urgency=low
-
-  * debian/sane-utils.postinst:
-    + Make proper use of debconf !@#%$. (Closes: #481442)
-  * debconf translations:
-    + fr.po: update by Christian Perrier. (Closes: #481439)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 16 May 2008 19:26:48 +0200
-
-sane-backends (1.0.19-9) unstable; urgency=low
-
-  * debian/sane-utils.postinst:
-    + Do not attempt to remove saned from the scanner group if it isn't part
-      of the group in the first place. (Closes: #481288)
-  * debian/patches/31_sanei_pthread_64bit_fix.dpatch:
-    + Added; from CVS, fix sanei_pthread on 64bit platforms.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 15 May 2008 18:54:37 +0200
-
-sane-backends (1.0.19-8) unstable; urgency=low
-
-  * Reupload 1.0.19-7 to unstable.
-
-  * debconf translations:
-    + pt.po: courtesy of Américo Monteiro. (Closes: #480219)
-    + cs.po: courtesy of Miroslav Kure. (Closes: #480313)
-    + de.po: courtesy of Helge Kreutzmann. (Closes: #480366)
-    + vi.po: courtesy of Clytie Siddall. (Closes: #480483)
-    + fi.po: courtesy of Esko Arajärvi. (Closes: #480550)
-    + fr.po: update by Christian Perrier.
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 14 May 2008 19:13:29 +0200
-
-sane-backends (1.0.19-7) experimental; urgency=low
-
-  * Introducing new saned & net backend features.
-    + saned can now run as a standalone daemon and offers mDNS/DNS-SD.
-      The net backend can discover saned servers on the (local) network.
-  * debian/patches/01_manpages_fixes.dpatch:
-    + Fix man warnings in sane-config.1 and sane-mustek_pp.5.
-  * debian/patches/30_new_saned.dpatch:
-    + Added; from CVS HEAD, backport new saned and net backend.
-  * debian/sane-utils.README.Debian:
-    + Enhancements, typo fixes.
-  * debian/sane-utils.templates, debian/sane-utils.config,
-    debian/sane-utils.postinst:
-    + Add a debconf question to automatically add the saned user to the
-      scanner group.
-    + Add a debconf question to enable saned as a standalone daemon.
-  * debian/rules:
-    + Enable Avahi support at configure time.
-    + Call dh_installdebconf.
-    + Call dh_installinit.
-  * debian/control:
-    + Build-Depend on po-debconf, libavahi-client-dev (>= 0.6.4).
-    + sane-utils: add ${misc:Depends} to get the appropriate debconf
-      dependencies.
-    + sane-utils: recommend avahi-daemon.
-    + libsane: recommend avahi-daemon.
-    + libsane-dev: depend on libavahi-client-dev.
-  * debian/sane-utils.saned.init, debian/sane-utils.saned.default:
-    + Add an initscript & default file for saned.
-
-  * debconf translations:
-    + eu.po: courtesy of Piarres Beobide. (Closes: #479380, #479808)
-    + fr.po: courtesy of Christian Perrier.
-    + pt_BR.po: courtesy of Eder L. Marques. (Closes: #479785)
-    + gl.po: courtesy of Jacobo Tarrio. (Closes: #479838)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 07 May 2008 18:37:07 +0200
-
-sane-backends (1.0.19-6) unstable; urgency=low
-
-  * debian/patches/08_epson2_be_nice_to_saned.dpatch:
-    + Added; from CVS, be nice to saned and do not pollute fd 0.
-      (Closes: #479052)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 03 May 2008 16:46:12 +0200
-
-sane-backends (1.0.19-5) unstable; urgency=low
-
-  * debian/patches/07_epson2_be_nice.dpatch:
-    + Added; from CVS, be nice to other backends and close the scanner device
-      when the device is not recognized (or another error happens).
-      (Closes: #476468)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 19 Apr 2008 17:16:13 +0200
-
-sane-backends (1.0.19-4) unstable; urgency=low
-
-  * debian/patches/03_snapscan_usb_ftok_fix.dpatch:
-    + Updated; improve the patch by falling back to ftok() for non-libusb
-      devices.
-  * debian/patches/04_sane-desc_hal_new.dpatch:
-    + Added; add support for newer HAL versions.
-  * debian/patches/05_hp_timing_fix.dpatch:
-    + Added; fix timing issue with HP scanners. (Closes: #472819)
-  * debian/patches/06_sanei_scsi_attach_fix.dpatch:
-    + Added; from CVS, continue to iterate over the list of devices even
-      if an attempt to attach one of the devices fails.
-  * debian/rules:
-    + Generate HAL FDI file for newer HAL versions. (Closes: #472664)
-  * debian/libsane-dev.doc-base:
-    + Fix doc-base section.
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 28 Mar 2008 22:39:17 +0100
-
-sane-backends (1.0.19-3) unstable; urgency=low
-
-  * debian/patches/01_disable_epson2.dpatch:
-    + Removed; reenable the epson2 backend.
-  * debian/patches/03_snapscan_usb_ftok_fix.dpatch:
-    + Added; work around the usage of ftok() in the snapscan backend. See
-      the patch description for details. (Closes: #466855)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 15 Mar 2008 16:16:38 +0100
-
-sane-backends (1.0.19-2) unstable; urgency=low
-
-  * debian/patches/02_pixma_update.dpatch:
-    + Added; update pixma backend from CVS, adding support for
-      - Pixma MP210, MP470, MP520, MP610, MultiPASS MP710
-      - MP140, MP220, MultiPASS MP740 (untested)
-      - MP970 (experimental, untested)
-      (Closes: #468270)
-  * debian/rules:
-    + Generate and install HAL fdi file. (Closes: #466540)
-  * debian/control:
-    + Add update-inetd dependency for sane-utils.
-  * debian/sane-utils.postinst, debian/sane-utils.postrm:
-    + Add support for update-inetd. (Closes: #426514)
-  * debian/sane-utils.README.Debian:
-    + Document update-inetd usage.
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 01 Mar 2008 14:11:29 +0100
-
-sane-backends (1.0.19-1) unstable; urgency=low
-
-  * New upstream release.
-    + New backends: cardscan (Corex Cardscan 800c), epjitsu (Epson-based
-      Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and
-      more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005
-      and more), hs2p (Ricoh IS400 series)
-    + Fix for the pixma backend. (Closes: #459663)
-    + Regression fix for the avision backend. (Closes: #458478, #458932)
-  * debian/patches/02_hurd_no_plustek_pp.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/11_minimum_linkage.dpatch:
-    + Updated.
-  * debian/patches/12_new_configure.dpatch:
-    + Updated.
-  * debian/control:
-    + Adjust libsane-extras dependencies for 1.0.19.
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 12 Feb 2008 21:44:19 +0100
-
-sane-backends (1.0.19~cvs20071213-5) unstable; urgency=low
-
-  * debian/control:
-    + Build-Depends: xutils-dev instead of xutils.
-    + Depend on libsane-extras{,-dev,-dbg} to help fix up the
-      buggy udev rules in libsane-extras.
-    + Promote libgphoto2-2-dev to Depends: for libsane-dev.
-  * debian/patches/02_hurd_no_plustek_pp.dpatch:
-    + Added; do not build plustek_pp on Hurd. (Closes: #457378)
-  * debian/patches/12_new_configure.dpatch:
-    + Updated.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 07 Jan 2008 12:07:27 +0100
-
-sane-backends (1.0.19~cvs20071213-4) unstable; urgency=low
-
-  * debian/patches/11_minimum_linkage.dpatch:
-    + Updated; add libcam for coolscan & umax, remove it for cardscan.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 31 Dec 2007 14:11:34 +0100
-
-sane-backends (1.0.19~cvs20071213-3) unstable; urgency=low
-
-  * debian/control:
-    + Tighten relationship with libsane-extras due to the udev rules renaming.
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 28 Dec 2007 11:45:30 +0100
-
-sane-backends (1.0.19~cvs20071213-2) unstable; urgency=low
-
-  * debian/rules:
-    + Generate udev rules as debian/libsane.udev, clean as needed.
-    + Use dh_installudev.
-    + Remove libsane-dll.* from /usr/lib/sane; libsane.so and libsane-dll.so
-      are the same backend.
-  * debian/libsane.postinst:
-    + Remove udev installation code.
-  * debian/libsane.preinst:
-    + Added; handle upgrade from previous udev code to dh_installudev.
-  * debian/patches/11_minimum_linkage.dpatch:
-    + Added; only link backends to the libraries they need.
-  * debian/patches/12_new_configure.dpatch:
-    + Added; new configure script.
-  * debian/patches/12_gphoto2_link_backend_only.dpatch:
-    + Removed; obsoleted by 11_minimum_linkage.dpatch.
-  * debian/patches/13_new_configure.dpatch:
-    + Removed; now 12_new_configure.dpatch.
-
- -- Julien BLACHE <jblache@debian.org>  Tue, 25 Dec 2007 22:58:26 +0100
-
-sane-backends (1.0.19~cvs20071213-1) unstable; urgency=low
-
-  * New CVS snapshot.
-    + New backend: hp3900.
-  * debian/control:
-    + Bump Standards-Version to 3.7.3 (no changes).
-    + Bump libsane-extras{,-dev} dependencies/conflicts/replaces to 1.0.18.13.
-    + Remove module-init-tools recommendation, enforced by udev which is a
-      dependency.
-  * debian/rules:
-    + Remove ${module-init-tools} substvar.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 13 Dec 2007 21:59:02 +0100
-
-sane-backends (1.0.19~cvs20071028-1) unstable; urgency=low
-
-  * New CVS snapshot.
-    + All backends now declare OPT_NUM_OPTS of type SANE_TYPE_INT.
-      (Closes: #448162)
-    + Fixed USB IDs for the Epson CX-6600. (Closes: #419349)
-    + Added USB IDs for the Epson DX-6000. (Closes: #442051)
-  * debian/control:
-    + libsane-dev Recommends: libgphoto2-2-dev.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 28 Oct 2007 11:17:36 +0100
-
-sane-backends (1.0.19~cvs20070730-1) unstable; urgency=low
-
-  * New CVS snapshot.
-    + Workaround for CONFIG_USB_SUSPEND. (Closes: #434276)
-  * debian/control, debian/rules:
-    + Make libsane depend on makedev | udev on Linux. (Closes: #428220)
-  * debian/libsane.postinst:
-    + Change MAKEDEV invocation to invoke /dev/MAKEDEV instead of /sbin/MAKEDEV.
-  * debian/control:
-    + Do not {build-,}depend on libusb-dev nor libieee1284-dev on hurd-i386.
-      (Closes: #434575)
-    + Use ${binary:Version} instead of ${Source-Version}.
-  * debian/rules:
-    + Do not ignore make distclean errors.
-  * debian/patches/30_sanei_scsi_sg_ioctl.dpatch:
-    + Removed; merged upstream.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 30 Jul 2007 14:03:13 +0200
-
-sane-backends (1.0.19~cvs20070505-3) unstable; urgency=low
-
-  * debian/patches/30_sanei_scsi_sg_ioctl.dpatch:
-    + Added; use the SG_IO ioctl interface instead of the asynchronous
-      read/write SG3 interface. This allows the use of SCSI scanners in
-      mixed 32/64bit environments, thanks to the ioctl 32bit compatibility
-      layer taking care of the 32/64bit sg_hdr conversion. (Closes: #420193)
-
-    If you own a SCSI scanner, please report back on this change; especially
-    if, compared to the previous version (1.0.19~cvs20070505-2):
-     - the scanner backtracks more than it used to with the previous version
-     - you see weird errors OR you see no error and you should be seeing some
-     - performance sucks
-     - resulting image is broken in one way or another
-     - ...
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 20 May 2007 10:46:00 +0200
-
-sane-backends (1.0.19~cvs20070505-2) unstable; urgency=low
-
-  * debian/patches/01_disable_epson2.dpatch:
-    + Added; disable epson2 backend by default. (Closes: #422697)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 12 May 2007 10:37:11 +0200
-
-sane-backends (1.0.19~cvs20070505-1) unstable; urgency=low
-
-  * New CVS snapshot.
-    + New backend: hp5590.
-  * debian/patches/31_epson_remove_check.dpatch:
-    + Removed; merged upstream.
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 05 May 2007 20:37:07 +0200
-
-sane-backends (1.0.19~cvs20070421-1) unstable; urgency=low
-
-  * debian/control:
-    + Update Build-Depends for the TeXLive migration.
-    + Removed old Conflicts.
-    + Upgrade libsane-extras minimum version to 1.0.18.6.
-  * debian/rules:
-    + Drop hotplug support.
-    + Drop code for Sarge backports.
-  * debian/libsane.postinst:
-    + Remove old hotplug-ng files, code taken from Ubuntu.
-  * debian/libsane.README.Debian, debian/sane-utils.README.Debian:
-    + Removed hotplug notes.
-  * debian/patches/03_usb_perms_664.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/11_hotplug_wait_for_device.dpatch:
-    + Removed; not needed anymore.
-  * debian/patches/30_udev_long_comment_lines.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/32_microtek2_add_check.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/33_manpages_fixes.dpatch:
-    + Removed; merged upstream.
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 21 Apr 2007 13:33:26 +0200
-
-sane-backends (1.0.18-6) unstable; urgency=low
-
-  * Enable libieee1284 support on kFreeBSD-amd64. (Closes: #413178)
-  * debian/control:
-    + Build-depend on libieee1284-3-dev (>= 0.2.10-5) for all architectures.
-    + libsane-dev depends on libieee1284-3-dev (>= 0.2.10-5) for all architectures.
-  * debian/rules:
-    + Remove the libieee1284-3-dev substitution variable.
-
- -- Julien BLACHE <jblache@debian.org>  Sat,  3 Mar 2007 11:39:33 +0100
-
-sane-backends (1.0.18-5) unstable; urgency=medium
-
-  * debian/patches/32_microtek2_add_check.dpatch:
-    + Added; Add missing return status check, preventing a segfault later
-      on. (Closes: #398153)
-  * debian/patches/33_manpages_fixes.dpatch:
-    + Added; fix man warnings in some manpages.
-
- -- Julien BLACHE <jblache@debian.org>  Mon,  8 Jan 2007 19:52:22 +0100
-
-sane-backends (1.0.18-4) unstable; urgency=medium
-
-  * debian/patches/31_epson_remove_check.dpatch:
-    + Added; Remove bogus check in epson backend get_identity2_information()
-      affecting Stylus CX5xxx models. (Closes: #399119, #402444)
-  * debian/sane-utils.README.Debian:
-    + Fix typo, the manpage for saned is in section 8 not 1.
-  * debian/control:
-    + libsane-dbg is Priority: extra.
-    + Remove Uploaders.
-
-      Thank you Aurélien JARNO for your help during these years.
-
- -- Julien BLACHE <jblache@debian.org>  Sat,  6 Jan 2007 18:46:43 +0100
-
-sane-backends (1.0.18-3) unstable; urgency=low
-
-  * debian/patches/30_udev_long_comment_lines.dpatch:
-    + Added; split very long comment lines in the udev rules file.
-      (Closes: #376859)
-  * debian/libsane.README.Debian:
-    + Updated; udev no longer sets permissions on /proc/bus/usb/xxx/yyy,
-      /dev/bus/usb/xxx/yyy is used instead now.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 30 Jul 2006 20:40:09 +0200
-
-sane-backends (1.0.18-2) unstable; urgency=low
-
-  * debian/control:
-    + Build-Depends: libltdl3-dev, needed to link with libgphoto2-2.
-    + sane-utils Suggests: unpaper.
-
- -- Julien BLACHE <jblache@debian.org>  Tue,  4 Jul 2006 09:09:04 +0200
-
-sane-backends (1.0.18-1) unstable; urgency=low
-
-  * New upstream release.
-    + New backends: dell1600n_net, hp3500, pixma, stv680. (Closes: #360303)
-    + Canon LiDE 60 USBids added to the genesys description file. (Closes: #366871)
-  * debian/patches/01_usbids.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/26_manpages_spelling_fixes.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/25_glibc_sys_io_h.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/03_usb_perms_664.dpatch:
-    + Updated; the convert-usermap.sh scripts are gone.
-  * debian/patches/04_udev_rules_fix.dpatch:
-    + Removed; merged upstream.
-  * debian/rules:
-    + Use sane-desc to generate the udev rules file and the hotplug data file.
-    + Improve manpage list generation for the libsane package.
-  * debian/control:
-    + Build-Depends: libtiff4-dev, for the dell1600n_net backend.
-
- -- Julien BLACHE <jblache@debian.org>  Mon,  3 Jul 2006 20:30:17 +0200
-
-sane-backends (1.0.17-4) unstable; urgency=low
-
-  * debian/compat:
-    + Bumped DH_COMPAT to 5.
-  * debian/control:
-    + Bumped Standards-Version to 3.7.2 (no changes).
-    + Build-Depend on debhelper (>= 5.0.0) for DH_COMPAT=5.
-    + New libsane-dbg binary for debugging symbols. (Closes: #366767)
-  * debian/rules:
-    + Tell dh_strip to put debugging symbols into libsane-dbg.
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 26 May 2006 13:40:01 +0200
-
-sane-backends (1.0.17-3) unstable; urgency=low
-
-  * debian/control:
-    + Add ${libieee1284-3-dev} to libsane-dev Depends. (Closes: #364294)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 22 Apr 2006 19:58:12 +0200
-
-sane-backends (1.0.17-2) unstable; urgency=low
-
-  [ Aurélien JARNO ]
-  * debian/control:
-    + Build-depends: libcam-dev on kfreebsd-i386 and kfreebsd-amd64.
-    + Build-depends: !libieee1284-dev on kfreebsd-amd64.
-    + libsane-dev depends: libcam-dev on GNU/kFreeBSD.
-  * debian/patches/25_glibc_sys_io_h.dpatch:
-    + New; check for GNU libc instead of Linux kernel.
-
-  [ Julien BLACHE ]
-  * debian/patches/02_udev_rules.dpatch:
-    + Removed; coldplugging now works OK, the hotplug script aren't needed
-      anymore. (Closes: #359800)
-  * debian/patches/03_usb_perms_664.dpatch:
-    + Updated.
-  * debian/patches/04_udev_rules_fix.dpatch:
-    + Added; fix udev rules file so that the rules only run for ACTION=add
-      on the usb subsystem. (Closes: #359797)
-  * debian/patches/01_usbids.dpatch:
-    + Added; add Epson Stylus CX7800 USB IDs. (Closes: #350436)
-  * debian/patches/26_manpages_spelling_fixes.dpatch:
-    + Added; various spelling fixes to the manpages. (Closes: #357568)
-  * debian/control:
-    + Removed Conflicts: on very old SANE versions.
-    + Recommends: module-init-tools (>= 3.2.2-1). (Closes: #344541)
-    + Recommends: udev (>= 0.88-1) for a version of udev with working
-      coldplugging support. Let me know if the version can be lowered,
-      thanks.
-  * debian/rules:
-    + Add variable substitution for module-init-tools on Linux.
-    + Add version to the udev variable substitution.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 13 Apr 2006 21:40:58 +0200
-
-sane-backends (1.0.17-1) unstable; urgency=low
-
-  [ Julien BLACHE ]
-  * New upstream release.
-    + New backends: hp4200, lexmark, mustek_usb2.
-    + Now ignores EBUSY on set_configuration for real. (Closes: #332281)
-    + Fixed USB IDs for BearPaw 2448 TA Plus to use only lowercase letters. (Closes: #341046)
-  * debian/patches/01_hotplug_usbids.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/02_tools_udev.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/02_udev_rules.dpatch:
-    + Added; add a RUN rule to run the hotplug.d script (for coldplugging).
-  * debian/control:
-    + Build-Depends: xutils as makedepend is now used by the build system.
-    + Adjust conflicts/suggests for libsane-extras.
-
-  [ Aurélien JARNO ]
-  * debian/patches/03_usb_perms_664.dpatch:
-    + Added; lsusb needs read access to USB devices to work properly.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 18 Dec 2005 17:09:47 +0100
-
-sane-backends (1.0.16-5) unstable; urgency=low
-
-  * debian/patches/02_tools_udev.dpatch:
-    + Run the hotplug.d script to ensure a working coldplug. (Closes: #334068)
-  * debian/patches/30_misc_fixes.dpatch:
-    + Fix a typo in sane-find-scanner(1). (Closes: #310333)
-  * debian/patches/34_sanei_usb_ignore_set_config_ebusy.dpatch:
-    + Ignore EBUSY on set_configuration to better accomodate MFC devices. (Closes: #332281)
-  * debian/libsane.postrm:
-    + Remove /etc/udev/rules.d/025_libsane.rules on purge. (Closes: #333569)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 27 Oct 2005 20:25:16 +0200
-
-sane-backends (1.0.16-4) unstable; urgency=low
-
-  * debian/patches/02_tools_udev.dpatch:
-    + Fix broken tools/udev/convert-usermap.sh script.
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 28 Sep 2005 22:59:41 +0200
-
-sane-backends (1.0.16-3) unstable; urgency=low
-
-  * The udev release. Thanks to Marco d'Itri for his help.
-  * debian/patches/02_tools_udev.dpatch:
-    + Added; adds tools/udev from CVS.
-  * debian/rules:
-    + Generate the udev rules file for libsane and install it.
-    + Generate a modprobe blacklist (same as the hotplug blacklist).
-  * debian/libsane.postinst:
-    + Symlink the udev rules file under /etc/udev/rules.d; do that only once.
-  * debian/control:
-    + Recommends: hotplug | udev
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 28 Sep 2005 22:42:38 +0200
-
-sane-backends (1.0.16-2) unstable; urgency=low
-
-  * debian/patches/11_hotplug_wait_for_device.dpatch:
-    + Bump timeout to 25 seconds.
-  * debian/patches/01_hotplug_usbids.dpatch:
-    + Added; pulled from CVS. (Closes: #323607)
-  * debian/patches/32_plustek_update.dpatch:
-    + Supersedes 32_add_lide25.dpatch; plustek backend update, adds LiDE 25
-      support and fixes LiDE 20 support.
-  * debian/patches/33_sm3600_update.dpatch:
-    + Added; pulled from CVS, sm3600 adapted to sanei_usb.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 28 Aug 2005 18:33:18 +0200
-
-sane-backends (1.0.16-1) unstable; urgency=low
-
-  [ Julien BLACHE ]
-  * New upstream release.
-    + New backends: sm3840, genesys.
-    + Fixed typos in manpages. (Closes: #310332, #310333)
-  * Patches removed (integrated upstream):
-    + 01_hotplug_usbids.dpatch
-    + 02_tools_hotplug-ng.dpatch
-    + 03_manpages_fixes.dpatch
-    + Most of 30_misc_fixes.dpatch
-    + 31_gt68xx_fixes.dpatch
-    + 32_snapscan_update.dpatch
-    + 33_avision_update.dpatch
-    + 34_plustek_update.dpatch
-    + 35_libusbscanner_2.6_fixes.dpatch
-    + 36_sane-find-scanner_message.dpatch
-    + 37_epson_usbids.dpatch
-  * debian/libsane.postinst:
-    + Removed the udev check, it's broken and MAKEDEV now does the Right
-      Thing (tm) on its own. (Closes: #310216)
-    + Remove anything debconf-related.
-  * debian/control:
-    + Bumped Standards-Version to 3.6.2 (no changes).
-    + Update the conflict on libsane-extras.
-    + Downgrade Depends: sane-utils to Recommends: sane-utils now that Sarge
-      has been released.
-    + Drop dependency on debconf.
-  * debian/rules:
-    + Generate sane-backends.pot, patch from Martin Pitt. (Closes: #313527)
-    + Comment call to dh_installdebconf, we don't use debconf anymore.
-
-  [ Aurélien JARNO ]
-  * DEB_HOST_GNU_SYSTEM replaced by DEB_HOST_ARCH_OS.
-  * Get rid of debian/control.in by using the -V option of dpkg-gencontrol.
-
- -- Julien BLACHE <jblache@debian.org>  Sun,  7 Aug 2005 15:00:05 +0200
-
-sane-backends (1.0.15-10) unstable; urgency=low
-
-  * debian/patches/01_hotplug_usbids.dpatch:
-    + Updated; added Genius ColorPage Vivid3XE. (Closes: #305993)
-    + Added Microtek ScanMaker 3700. (Closes: #307952)
-    + Added Epson Stylus RX620. (Closes: #308867)
-  * debian/patches/11_hotplug_wait_for_device.dpatch:
-    + Added; try to wait for the device to appear in the FS. (Closes: #302891)
-  * debian/patches/30_misc_fixes.dpatch:
-    + Updated; fixed "device model referenced not duplicated" in the v4l
-      backend. (Closes: #306458)
-  * debian/control.in:
-    + Build-Depend on a fixed libusb.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 22 May 2005 11:09:19 +0200
-
-sane-backends (1.0.15-9) unstable; urgency=low
-
-  * debian/patches/22_dll_backend_conf.dpatch:
-    + Process /etc/sane.d/dll.d first, so that those backends will be loaded
-      last. This will prevent buggy extras backends to perturb other backends.
-  * debian/patches/03_manpages_fixes.dpatch:
-    + Fix a typo in sane(7), reported by A Costa. (Closes: #302675)
-    + Fix 3 typos in scanimage(1), also reported by A Costa. (Closes: #302334)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 20 Apr 2005 16:17:20 +0200
-
-sane-backends (1.0.15-8) unstable; urgency=low
-
-  [ Aurélien Jarno ]
-  * Drop support for the scanner kernel module. Switch to libusb NOW.
-    + Drop the devfs config file, remove /etc/devfs/conf.d/devfs
-      in libsane.postinst.
-  * Transition to the new hotplug hook scheme (pulled from CVS), which is
-    compatible with both hotplug and hotplug-ng.
-    + Remove /etc/hotplug/usb/libsane.usermap and /etc/hotplug/usb/libusbscanner
-      in libsane.postinst.
-    + Conflicts with libsane-extras (<< 1.0.15.7) to avoid partial upgrades, as
-      1.0.15.7 is the version compatible with the new hotplug script.
-
-  [ Julien Blache ]
-  * Added support for GNU/kFreeBSD. (Closes: #297979)
-    + debian/rules: generate control at clean time.
-    + debian/rules: install README.{linux,freebsd} depending on the system.
-    + debian/patches/23_unneeded_doc.dpatch: do not install OS-specific READMEs.
-    + debian/control.in: do not depend on makedev on !linux (via debian/rules).
-    + debian/libsane.postinst: do not create device nodes on !linux.
-  * debian/rules:
-    + Install only the manpages for the backends which have been built.
-    + Cut the head of libsane.usermap to remove the comments pertaining to the
-      old usermap format.
-  * debian/libsane.README.Debian:
-    + Updated to relfect the hotplug changes.
-  * debian/libsane.postinst:
-    + Do not create device nodes when udev is in use.
-
- -- Julien BLACHE <jblache@debian.org>  Sun,  6 Mar 2005 00:36:43 +0100
-
-sane-backends (1.0.15-7) unstable; urgency=low
-
-  [ Julien BLACHE ]
-  * debian/patches/22_dll.conf_debian.dpatch
-    + Removed; renamed to 22_dll_backend_conf.dpatch.
-  * debian/patches/22_dll_backend_conf.dpatch
-    + Added; adds a Debian-specific comment to the dll.conf file, and patches
-      the dll backend to look for pieces of dll.conf in the /etc/sane.d/dll.d
-      directory; this is a facility for packages providing external backends,
-      like libsane-extras, hpoj and hplip.
-
-  [ Aurélien Jarno ]
-  * debian/patches/01_hotplug_usbids.dpatch
-    + Added Epson Corp. Stylus CX6600 to libsane.usermap. (Closes: #293082)
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 21 Feb 2005 16:43:41 +0100
-
-sane-backends (1.0.15-6) unstable; urgency=low
-
-  * debian/control
-    + Recommends: hotplug (was Suggests: hotplug).
-    + Suggests: hpoj, hplip.
-  * debian/rules
-    + Blacklist the scanner module wrt hotplug.
-  * debian/libsane.README.Debian
-    + Explain that the scanner module is going away, and that we're now
-      blacklisting it wrt hotplug upon installation of the package.
-  * debian/patches/01_hotplug_usbids.dpatch
-    + Updated; added Epson Stylus RX-425.
-  * debian/patches/37_epson_usbids.dpatch
-    + Added; adds Epson Stylus RX-425.
-  * debian/patches/30_misc_fixes.dpatch
-    + Updated; added initialization of dev->scanning in coolscan.c.
-  * debian/patches/02_manpages_fixes.dpatch
-    + Added; manpages fixes from esr.
-  * debian/patches/32_snapscan_deinterlacer.dpatch
-    + Removed; renamed to 32_snapscan_update.dpatch.
-  * debian/patches/32_snapscan_update.dpatch
-    + Added; contains all of the previous 32_snapscan_deinterlacer.dpatch,
-      plus it adds support for the Epson Perfection 1270, BenQ 5250C and
-      quality calibration for the Epson Perfection 2480.
-  * debian/patches/22_dll.conf_debian.dpatch
-    + Updated; added the sm3840 backend provided by libsane-extras and the
-      hpaio backend provided by hplip. (Closes: #291435)
-  * debian/patches/38_artec_e+48_conf.dpatch
-    + Added; adds proper configuration for the Umax AstraSlim SE.
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 22 Jan 2005 13:54:58 +0100
-
-sane-backends (1.0.15-5) unstable; urgency=medium
-
-  * debian/patches/34_plustek_update.dpatch:
-    + Added; pulled from CVS, contains fixes for Epson Perfection 1260
-      scanners. (Closes: #290029)
-  * debian/patches/35_libusbscanner_2.6_fixes.dpatch:
-    + Added; applied patch from Martin Pitt to use sysfs to determine the
-      device number, instead of guessing it in a semi-broken way.
-      (Closes: #289666)
-  * debian/patches/36_sane-find-scanner_message.dpatch
-    + Added; adds a "make sure your scanner is powered up and plugged in"
-      message to sane-find-scanner. (Closes: #287592)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 12 Jan 2005 17:48:30 +0100
-
-sane-backends (1.0.15-4) unstable; urgency=medium
-
-  * debian/control:
-    + Added build-dependency on pkg-config. (Closes: #286140)
-  * debian/patches/13_new_configure.dpatch:
-    + Fixed; remove unwanted autom4te.cache directory from the patch.
-      (Closes: #286143)
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 19 Dec 2004 18:08:23 +0100
-
-sane-backends (1.0.15-3) unstable; urgency=low
-
-  * debian/patches/31_gt68xx_fixes.dpatch:
-    + Updated; added a fix for Mustek BearPaw 2448 TA/CS Plus scanners.
-      (Closes: #284674)
-  * debian/patches/33_avision_update.dpatch:
-    + Added; improved avision backend from CVS.
-
- -- Julien BLACHE <jblache@debian.org>  Thu,  9 Dec 2004 16:01:50 +0100
-
-sane-backends (1.0.15-2) unstable; urgency=low
-
-  * debian/patches/01_hotplug_usbids.dpatch:
-    + Added; taken from CVS, adds missing USB IDs to the hotplug scripts.
-      (Closes: #280821, #281003)
-  * debian/patches/31_gt68xx_fixes.dpatch:
-    + Added; taken from CVS, fixes incorrect mode check for some scanners.
-      (Closes: #281061)
-  * debian/patches/30_misc_fixes.dpatch:
-    + Added; miscellaneous fixes from CVS/sane-devel.
-  * debian/patches/32_snapscan_deinterlacer.dpatch:
-    + Added; taken from CVS, adds a deinterlacer filter to the snapscan
-      backend, which is needed to scan at 2400 DPI with some scanners.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 14 Nov 2004 15:39:36 +0100
-
-sane-backends (1.0.15-1) unstable; urgency=low
-
-  * New upstream release.
-    + Patch for Microtek Phantom C6 on PowerPC merged upstream.
-      (Closes: #274523)
-    + New backend: niash.
-  * debian/control:
-    + Update conflicts/replaces on libsane-extras 1.0.15.1.
-  * debian/patches/01_libusbscanner.dpatch:
-    + Removed; taken from CVS, included in this version.
-  * debian/patches/02_epson_usbids.dpatch:
-    + Removed; taken from CVS, included in this version.
-  * debian/patches/03_hotplug_usbids.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/11_libtool_unneeded_checks.dpatch:
-    + Removed.
-  * debian/patches/12_gphoto2_link_backend_only.dpatch:
-    + Updated; revert unwanted backend/Makefile.in patch causing an incorrect
-      rpath in /usr/lib/libsane.la. (Closes: #279082)
-  * debian/patches/13_new_configure.dpatch:
-    + Updated.
-  * debian/patches/22_dll.conf_debian.dpatch:
-    + Updated; the niash backend is now part of SANE.
-  * debian/patches/25_saned_man_section.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/26_scanimage_batch.dpatch:
-    + Removed; merged upstream.
-  * debian/patches/27_snapscan-usb_count_urb.dpatch:
-    + Removed; taken from CVS, included in this version.
-  * debian/sane-utils.README.Debian:
-    + Fix reference to /usr/share/doc/libsane/README.Debian.gz
-      (Closes: #278670)
-
- -- Julien BLACHE <jblache@debian.org>  Tue,  9 Nov 2004 23:28:23 +0100
-
-sane-backends (1.0.14-7) unstable; urgency=medium
-
-  * Co-maintainer upload.
-  * debian/patches/27_snapscan-usb_count_urb.dpatch:
-    + Added, backported from CVS: Don't enforce even number of URB packages
-       on snapscan 1212u_2. (Closes: #250885)
-  * debian/patches/03_hotplug_usbids.dpatch:
-    + Added Epson Corp. Stylus CX6400 to libsane.usermap. (Closes: #293946)
-
- -- Aurelien Jarno <aurel32@debian.org>  Mon,  9 Aug 2004 11:17:13 +0200
-
-sane-backends (1.0.14-6) unstable; urgency=medium
-
-  * Urgency=medium as this revision will fix the upgrade path from Woody.
-  * debian/control:
-    + Removed obsolete gcc-3.3 build-depends. (Closes: #262245)
-    + Upgraded the sane-utils recommendation to a dependency as an upgrade
-      path from Woody. (Closes: #263408)
-  * debian/rules:
-    + Create /etc/hotplug/blacklist.d/libsane to prevent hotplug
-      from loading the no-longer-needed hpusbscsi module. (Closes: #260734)
-  * debian/patches/03_hotplug_usbids.dpatch:
-    + Added; adds HP ScanJet 5300C to libsane.usermap. (Closes: #260736)
-  * debian/patches/26_scanimage_batch.dpatch:
-    + Added; adds possibility to interrupt a batch scan in scanimage by
-      pressing ^D. (Closes: #260230)
-
- -- Julien BLACHE <jblache@debian.org>  Wed,  4 Aug 2004 22:12:40 +0200
-
-sane-backends (1.0.14-5) unstable; urgency=low
-
-  * debian/patches/02_epson_usbids.dpatch
-    + Put back the USB IDs for the Perfection 1650, remove the USB IDs for the
-    Perfection 1250, which now really fixes the bug.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 13 Jun 2004 13:48:27 +0200
-
-sane-backends (1.0.14-4) unstable; urgency=low
-
-  * debian/libsane.postinst
-    + modutils is Required, not Essential; replace kernelversion (provided by
-      modutils) by uname -r | cut. (Closes: #254140)
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 13 Jun 2004 12:12:02 +0200
-
-sane-backends (1.0.14-3) unstable; urgency=low
-
-  * debian/libsane.postinst
-    + Do not create /dev/usb/scanner* if running a 2.6 kernel.
-  * debian/patches/02_espon_usbids.dpatch
-    + Remove USB IDs for Perfection 1250 and 1260; these scanners are handled
-      by the plustek backend (pulled from CVS). (Closes: #248859)
-  * debian/patches/25_saned_man_section.dpatch
-    + Added; saned goes to /usr/sbin, its manpage should go to section 8.
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 11 Jun 2004 21:37:18 +0200
-
-sane-backends (1.0.14-2) unstable; urgency=low
-
-  * debian/patches/22_dll.conf_debian.dpatch
-    + Enable the hpoj backend by default. (Closes: #246985, #248379)
-  * debian/patches/01_libusbscanner.dpatch
-    + Pulled from CVS, fixes hotplug's lack of backward compatibility
-      (Closes: #248770)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 20 May 2004 20:25:18 +0200
-
-sane-backends (1.0.14-1) unstable; urgency=low
-
-  * New upstream release.
-    + USB IDs for EPSON Stylus CX5400 added. (Closes: #243295)
-    + USB IDs for Nikon CoolScan 5000 added. (Closes: #243792)
-  * debian/hotplug/*
-    + removed, integrated upstream (tools/hotplug).
-  * debian/patches/01_mustek_pp_unified.dpatch
-    + removed, integrated in this release.
-  * debian/patches/02_hp_backend_usb_fix.dpatch
-    + removed, integrated in this release.
-  * debian/rules
-    + install the provided hotplug script and config file.
-
- -- Julien BLACHE <jblache@debian.org>  Sat,  1 May 2004 16:26:47 +0200
-
-sane-backends (1.0.13-4) unstable; urgency=low
-
-  * debian/patches/02_hp_backend_usb_fix.dpatch
-    + added, pulled from CVS, fixes USB problems on kernel 2.6. (Closes: #242188)
-  * Updated libsane.usermap from CVS. (Closes: #242090)
-  * Updated README.Debian, fixed a couple of typos.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 11 Apr 2004 10:31:41 +0200
-
-sane-backends (1.0.13-3) unstable; urgency=low
-
-  * debian/libsane.config, debian/libsane.templates, debian/po:
-    + Removed, we don't use debconf anymore.
-  * debian/postinst:
-    + Fixed the /dev/usb/parport0 typo that should have read /dev/parport0.
-      Thanks to Tore Anderson for catching this one.
-    + Removed anything debconf-related, only purge whatever is left in the
-      debconf DB. (Closes: #224597)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 20 Dec 2003 18:44:37 +0100
-
-sane-backends (1.0.13-2) unstable; urgency=low
-
-  * debian/patches: order of the patches changed (slightly).
-    + 01_mustek_pp_unified.dpatch: scan area fixes.
-
- -- Julien BLACHE <jblache@debian.org>  Mon,  1 Dec 2003 19:19:19 +0100
-
-sane-backends (1.0.13-1) unstable; urgency=low
-
-  * New upstream release.
-  * debian/patches:
-    + 20_net.c_fixes.dpatch : removed, merged upstream.
-    + 21_gt68xx_uhci_fixes.dpatch : ditto.
-    + 04_hp5400_sanei_config2.dpatch : ditto.
-    + 03_new_configure : updated.
-    + 04_mustek_pp_unified: added; with this patch the mustek_pp backend
-      supports both CIS and CCD scanners. (Closes: #190998)
-  * debconf:
-    + Direct users to README.Debian.gz instead of README.Debian
-     . (Closes: #217347)
-    + Added Japanese translation. (Closes: #214040)
-    + Added Dutch translation. (Closes: #218905)
-    + Added German translation, thanks to Dirk Ritter and debian-l10n-german.
-  * debian/sane-utils.README.Debian:
-    + More details about the saned user and group, and the reason why the saned
-      user is not part of the scanner group by default. (Closes: #220024)
-  * debian/devfs/scanner:
-    + Added an example for SCSI devices, thanks to Dirk Ritter.
-  * debian/control:
-    + Standards-Version bumped to 3.6.1 (no changes).
-  * debian/rules, debian/compat:
-    + Switch to DH_COMPAT 4, and moved from dh_movefiles to dh_install.
-  * debian/control, debian/rules:
-    + Build-depend on chrpath and use it to remove rpath from the binaries.
-
- -- Julien BLACHE <jblache@debian.org>  Mon, 24 Nov 2003 18:35:21 +0100
-
-sane-backends (1.0.12-7) unstable; urgency=low
-
-  * The "Maintainer's birthday" release.
-  * Simplified the needlessly complex debconf questions. Now use a multiselect
-    question instead of 3 independent questions:
-    + debian/libsane.templates: rewritten to use a multiselect type
-    + debian/libsane.config: ditto, try to convert from the older questions,
-      then purge them once done.
-    + debian/libsane.postinst: rewritten to parse the answer from the new
-      debconf thingy.
-    + debian/control: now Depends: debconf (>= 0.5.0) due to the use of db_fset
-      in debian/libsane.config.
-  * debian/libsane.postinst: use ':' as a separator for chown instead of '.'.
-  * debian/libsane.README.Debian: ditto.
-  * debian/control: only Suggests: hotplug. (Closes: #205291)
-
- -- Julien BLACHE <jblache@debian.org>  Wed, 20 Aug 2003 14:03:14 +0200
-
-sane-backends (1.0.12-6) unstable; urgency=low
-
-  [ Julien BLACHE ]
-  * debian/control
-    + Bumped Standards-Version to 3.6.0 (no changes).
-    + libsane depends on adduser (>= 3.47).
-    + libsane recommends hotplug.
-  * debian/libsane.templates: templates slightly rewritten to accomodate the
-    various debconf frontends. (Closes: #202744)
-  * debconf-related items:
-    + Switched debconf templates to debconf-po, thus build-depends on
-      debhelper (>= 4.1.16). (Closes: #203669)
-    + Added french debconf translation based on translation from Michel
-      Grentzinger <mic.grentz(AT)online.fr> for sane-backends 1.0.12-5.
-      (Closes: #203670)
-  * debian/libsane.postinst:
-    + Add a scanner system group, and chown root.scanner /dev/usb/scanner* if
-      we create them. (Closes: #201851)
-  * debian/libsane.README.Debian:
-    + Added a Setup paragraph, detailing permissions issues and solutions
-      implemented by this package.
-  * debian/sane-utils.README.Debian:
-    + Added, deals with permissions issues wrt the saned daemon.
-  * hotplug support:
-    + debian/hotplug/libusbscanner: added, hotplug script for scanners used
-      with libusb, courtesy of Max Kutny <mkut(AT)umc.com.ua>. Installed as
-      /etc/hotplug/usb/libusbscanner.
-    + debian/hotplug/libsane.usermap: example map file for use with hotplug.
-      Installed as /etc/hotplug/usb/libsane.usermap.
-
-  [ Aurélien JARNO ]
-  * debian/devfs/scanner:
-    + Added, installed as /etc/devfs/conf.d/scanner.
-
- -- Julien BLACHE <jblache@debian.org>  Wed,  6 Aug 2003 13:08:11 +0200
-
-sane-backends (1.0.12-5) unstable; urgency=low
-
-  * 21_gt68xx_uhci_fixes.dpatch : fix timeout with UHCI host controllers.
-  * debian/control:
-    - Added temporary Build-Dependency on gcc-3.3 (>= 3.3.1-0pre0), which should
-      fix the ICE on m68k.
-  * debian/rules:
-    - Should build with -O2 on m68k again.
-
- -- Julien BLACHE <jblache@debian.org>  Wed,  2 Jul 2003 12:04:59 +0200
-
-sane-backends (1.0.12-4) unstable; urgency=low
-
-  [ Julien BLACHE ]
-  * The "I fucking hate libtool" release. Prevent libtool from checking things
-    we do not need at all, such as a C++ or an F77 compiler. Sigh.
-  * Converted to dpatch. Build-depends on dpatch.
-  * Re-enable the gphoto2 backend, -but- do so that frontends do not get linked
-    against libgphoto2. Only the backend is linked against it. (Closes: #195613)
-  * Thus, adds back the libgphoto2-2-dev build-dependency.
-  * Effectively move the html doc to the html subdir, instead of copying them
-    with dh_install.
-
-  [ Aurélien JARNO ]
-  * Add autotools-stamp, so that configure won't be run twice.
-  * Do not link sanei_config2 in hp5400 : not needed (fixes an undefined
-    symbol, too).
-
- -- Julien BLACHE <jblache@debian.org>  Tue,  3 Jun 2003 22:34:48 +0200
-
-sane-backends (1.0.12-3) unstable; urgency=low
-
-  * Fix the net backend so that it _does_ try all alternatives before giving
-    up connecting to the server. (Closes: #195396)
-
- -- Julien BLACHE <jblache@debian.org>  Fri, 30 May 2003 19:22:54 +0200
-
-sane-backends (1.0.12-2) unstable; urgency=low
-
-  * Build with -O1 on m68k; -O2 triggers an ICE.
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 29 May 2003 11:36:41 +0200
-
-sane-backends (1.0.12-1) unstable; urgency=low
-
-  * New upstream release.
-    + Should now work on m68k. Yeah. (Closes: #77356)
-    + sane(7) has been improved. (Closes: #188647)
-    + scanimage(1) has been fixed, wrt --batch.
-    + The hp5400 backend has been included, replaces libsane-extras (<< 1.0.12.1).
-    + IPv6 support.
-  * Standards-Version bumped to 3.5.10 (no changes).
-  * libsane-dev belongs to libdevel.
-  * Do not generate manpages and documentation we do not need.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 25 May 2003 21:14:37 +0200
-
-sane-backends (1.0.11-4) unstable; urgency=medium
-
-  * Move saned.conf to the sane-utils package. Woops. (Closes: #192742)
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 10 May 2003 08:41:23 +0200
-
-sane-backends (1.0.11-3) unstable; urgency=medium
-
-  * The "We want to enter testing" release.
-  * Do not build the gphoto2 backend. Gphoto2 is blocked by a bunch of other
-    packages (KDE, ...) and we're free of RC bugs. Enough.
-  * Moved libphoto2-2-dev to Build-Conflicts.
-  * Bumped shlibs.
-
- -- Julien BLACHE <jblache@debian.org>  Sat,  3 May 2003 21:09:58 +0200
-
-sane-backends (1.0.11-2) unstable; urgency=low
-
-  * Do not tell how to configure libusb. (Closes: #180570)
-  * Do not print "Adding saned..." in sane-utils postinst
-    when the user already exists.
-  * Pulled fixed gphoto2 backend from CVS. (Closes: #180514)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 13 Feb 2003 13:22:21 +0100
-
-sane-backends (1.0.11-1) unstable; urgency=low
-
-  * New upstream release.
-    + security fixes to saned. (Closes: #180203)
-  * Added some debconf dialogs:
-    + /dev/parport*
-    + /dev/sg*
-    + note about /proc/bus/usb
-
- -- Julien BLACHE <jblache@debian.org>  Sun,  9 Feb 2003 21:17:16 +0100
-
-sane-backends (1.0.10-2) unstable; urgency=low
-
-  * Fix postrm breakage. (Closes: #179586)
-
- -- Julien BLACHE <jblache@debian.org>  Mon,  3 Feb 2003 12:39:14 +0100
-
-sane-backends (1.0.10-1) unstable; urgency=low
-
-  * New upstream release.
-    + fixed sane-scsi manpage. (Closes: #174136)
-    + mustek_pp now has CIS support. (Closes: #152321)
-  * Added http://www.mostang.com/sane/sane-mfgs.html
-    as /usr/share/doc/libsane/supported.html. (Closes: #174131)
-  * New backends, previously included in libsane-extras :
-    + gt68xx
-    + artec_eplus48u (known as tevion9693usb)
-  * datadir is ${prefix}/share, not ${prefix}/share/sane.
-  * Remove /usr/lib/sane/libsane.so.1, as it's not libsane.so.1
-    (looks like a libtool side-effect).
-  * Remove a couple more unwanted READMEs.
-  * Bumped Standards-Version to 3.5.8.
-  * Added a debconf dialog to create /dev/usb/*. (Closes: #177979)
-  * Added missing dependency on adduser to sane-utils.
-
- -- Julien BLACHE <jblache@debian.org>  Sun,  2 Feb 2003 11:22:24 +0100
-
-sane-backends (1.0.9-4) unstable; urgency=low
-
-  * Pulled dll.c from CVS, fixes in-line comments. (Closes: #171521)
-  * Applied patch for Plustek backend rounding bug. (Closes: #172012)
-
- -- Julien BLACHE <jblache@debian.org>  Mon,  9 Dec 2002 11:51:26 +0100
-
-sane-backends (1.0.9-3) unstable; urgency=low
-
-  * Rebuilt against new libgphoto2 package.
-  * Changed Uploaders: filed so that Aurélien's uploads won't be tagged as
-    NMU again.
-  * Do not generate debian/libsane.conffiles at build time, this is handled
-    by dh_installdeb automatically ; otherwise we end up with each conffile
-    being listed twice...
-
- -- Julien BLACHE <jblache@debian.org>  Sun,  1 Dec 2002 11:29:43 +0100
-
-sane-backends (1.0.9-2) unstable; urgency=low
-
-  * Co-maintainer upload.
-  * Remove /etc/sane.d directory on purge. (Closes: #167603)
-
- -- Aurelien Jarno <aurel32@debian.org>  Mon,  4 Nov 2002 14:10:54 +0100
-
-sane-backends (1.0.9-1) unstable; urgency=low
-
-  * New upstream release.
-    + Video for Linux (v4l) backend cleanup. (Closes: #159634)
-    + Updated Avision backend. (Closes: #146054)
-    + Updated Epson backend. (Closes: #114017)
-    + Fixed char signedness in backend/plustek-usbshading.c. (Closes: #164464)
-  * Fixed debian/copyright. (Closes: #146057)
-  * Enabled translations.
-  * Do not install the upstream changelog twice.
-  * sane-utils does not create /home/saned.
-  * Fixed packages descriptions. (Closes: #165138)
-
- -- Julien BLACHE <jblache@debian.org>  Thu, 24 Oct 2002 18:52:29 +0200
-
-sane-backends (1.0.8-4) unstable; urgency=low
-
-  * libsane-extras has its own source package now.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 13 Oct 2002 10:49:54 +0200
-
-sane-backends (1.0.8-3) unstable; urgency=low
-
-  * New maintainers.
-  * New upstream release. (Closes: #162532, #149317)
-    + saned manpage mentions /usr/sbin/saned. (Closes: #141464)
-    + Symlinks for manpages are properly created. (Closes: #99551)
-    + Fixed hostnames handling in saned.conf. (Closes: #51171)
-    + HP backend update. (Closes: #116962)
-    + Backend loader respects LD_LIBRARY_PATH. (Closes: #143771)
-    + Path for Epson USB scanner corrected in conf file. (Closes: #154296, #154305)
-    + A test backend is included, safer than the pnm backend. (Closes: #139256)
-    + Umax backend fixed. (Closes: #158676)
-    + HP backend fixed, no longer segfaults. (Closes: 154827)
-  * Repackaged from scratch, using debhelper.
-  * Standards-Version bumped to 3.5.6.
-  * Do not include rpath informations in sane-config. (Closes: #143603)
-  * Fixed build problem wrt umask. (Closes: #95440)
-  * Updated libsane-dev Depends. (Closes: #142679)
-  * Fixed typos in umax_pp.conf. (Closes: #158742)
-  * Fixed hp.conf for some scanners. (Closes: #154828)
-  * Fixed README.Debian. (Closes: #146039)
-  * Fixed sane-plustek(5) manpage. (Closes: #159435)
-  * New package sane-utils, contains sane-find-scanner, scanimage and saned.
-    + sane-utils creates user and group saned. (Closes: #141465)
-  * New package libsane-extras, containing some extra backends
-    + hp4200     (v0.2p1)
-    + gt68xx     (v1.0-23)
-    + niash      (v20020217) (Closes: #160327)
-    + tevion9693 (v0.0.9)
-  * Disabled translations until 1.0.9.
-
- -- Julien BLACHE <jblache@debian.org>  Sat, 12 Oct 2002 10:28:09 +0200
-
-sane-backends (1.0.8-2) unstable; urgency=low
-
-  * Added build-depends on gettext. (Closes: #163681)
-
- -- Kevin Dalley <kevind@rahul.net>  Mon,  7 Oct 2002 09:32:21 -0700
-
-sane-backends (1.0.8-1) unstable; urgency=low
-
-  * New upstream release.
-    + Many new backends
-    + Many more updated backends
-
- -- Kevin Dalley <kevind@rahul.net>  Sun,  6 Oct 2002 18:09:28 -0700
-
-sane-backends (1.0.7-3.2) unstable; urgency=high
-
-  * Non-Maintainer Upload.
-  * Fix build on SPARC.
-  * Fix build on HPPA, although it's not RC. (Closes: #138108)
-
- -- Julien BLACHE <jblache@debian.org>  Sun,  7 Apr 2002 11:39:41 +0200
-
-sane-backends (1.0.7-3.1) unstable; urgency=medium
-
-  * Non-Maintainer upload.
-  * Fixes compilation on Alpha, using the frontend/scanimage.c file from
-    the current CVS. (Closes: #138108)
-  * Apply patch submitted for #139509, regarding config.{sub,guess} issues
-    on MIPS. (Closes: #139509)
-  * Fix lintian complaint wrt misplaced Conflicts: field in control file.
-  * Fix lintian complaint about .comment section in /usr/lib/sane/*.so.*.
-
- -- Julien BLACHE <jblache@debian.org>  Sun, 31 Mar 2002 20:24:48 +0200
-
-sane-backends (1.0.7-3) unstable; urgency=low
-
-  * Link against libusb-0.1-4. (Closes: #119393)
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 15 Mar 2002 18:31:08 +0000
-
-sane-backends (1.0.7-2) unstable; urgency=low
-
-  * Don't link against libusb due to inconsistencies with versions of libusb
-    libraries. When libusb installation is cleaned up, then usb support
-    will be added again. Unfortunately, this re-opens #119393, though
-    with a lower severity. (Closes: #138349)
-
- -- Kevin Dalley <kevind@rahul.net>  Thu, 14 Mar 2002 22:25:53 +0000
-
-sane-backends (1.0.7-1) unstable; urgency=low
-
-  * New upstream release.
-  * Add libusb, which includes ScanMaker 3600 drivers. (Closes: #119393)
-  * Install plustek-share.h so that plustek driver can be built.
-    (Closes: #72341)
-
- -- Kevin Dalley <kevind@rahul.net>  Thu, 14 Mar 2002 01:02:21 +0000
-
-sane-backends (1.0.6-1) unstable; urgency=low
-
-  * New upstream release.
-    + New backend: gphoto2.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 27 Jan 2002 23:30:19 -0800
-
-sane-backends (1.0.5-3) unstable; urgency=low
-
-  * Rebuilt with new version of libgimp-1.2.2-2.
-
- -- Kevin Dalley <kevind@rahul.net>  Tue,  2 Oct 2001 22:31:15 -0700
-
-sane-backends (1.0.5-2) unstable; urgency=low
-
-  * Removed incorrect build dependency on libc6-dev. (Closes: #108639)
-
- -- Kevin Dalley <kevind@rahul.net>  Thu, 16 Aug 2001 08:12:40 -0700
-
-sane-backends (1.0.5-1) unstable; urgency=low
-
-  * New backends: bh (Bell+Howell Copiscan II series), dc240 (Kodak DC240
-    Digital Camera), sm3600 (Microtek ScanMaker 3600), umax_pp (Umax paralell
-    port scanners).
-  * Fix security bug in saned.c that allowed access to scanner without
-    password.
-
- -- Kevin Dalley <kevind@rahul.net>  Sat, 28 Jul 2001 12:38:46 -0700
-
-sane-backends (1.0.4-2) unstable; urgency=low
-
-  * Increase timeout in sanei_scsi.c, which removes problem with 2.4
-    kernels. (Closes: #84407)
-
- -- Kevin Dalley <kevind@rahul.net>  Thu, 31 May 2001 04:36:29 -0700
-
-sane-backends (1.0.4-1) unstable; urgency=low
-
-  * New upstream release.
-  * Add backend as63driver. (Closes: #69625)
-
- -- Kevin Dalley <kevin@seti.org>  Sun, 28 Jan 2001 09:17:24 -0800
-
-sane-gimp1.1 (1.0.3-4) unstable; urgency=low
-
-  * Link sane-gimp1.1 against libgimp1.1-1.1.29.
-  * Change control files so that packages sane and sane-gimp1.1 are
-    explicitly described as working with gimp and gimp1.1 respectively.
-    The package sane now mentions the packages sane-gimp1.1 and vice
-    versa.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun,  5 Nov 2000 13:56:49 -0800
-
-sane (1.0.3-3) unstable; urgency=low
-
-  * Link sane-gimp1.1 against libgimp1.1-1.1.28, which is new library.
-    (Closes: #75029)
-  * Define GIMP_ENABLE_COMPAT_CRUFT to allow use of newer libgimp.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 22 Oct 2000 21:52:29 -0700
-
-sane (1.0.3-2) unstable; urgency=low
-
-  * Fix dependency in libsane-dev. (Closes: #71578)
-  * Remove extraneous file which contains space in its name, which causes
-    patch and dpkg-source to fail. (Closes: #71566, #71564, #71540)
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 22 Sep 2000 23:04:17 -0700
-
-sane (1.0.3-1) unstable; urgency=low
-
-  * New upstream release.
-    + New backends:
-      - mustek_pp
-      - plustek
-      - st400
-      - v41
-    + Many updated backends.
-    + 16 bit support for scanimage.
-
- -- Kevin Dalley <kevind@rahul.net>  Sat,  2 Sep 2000 11:32:08 -0700
-
-sane (1.0.2-1) unstable; urgency=low
-
-  * New upstream release.
-  * Aliased and hidden backend support.
-  * Added Ricoh IS50 support.
-  * updated many backends.
-  * New Linux SCSI Generic driver.
-  * sane-gimp1.1 linked with libsane-1,1.22. (Closes: #66544)
-
- -- Kevin Dalley <kevind@rahul.net>  Mon,  3 Jul 2000 23:38:42 -0700
-
-sane (1.0.1-1999-10-21-12) unstable; urgency=low
-
-  * Add libjpeg62-dev, tetex-bin, tetex-extra to Build-Depends.
-    (Closes: #61834, 61835)
-
- -- Kevin Dalley <kevind@rahul.net>  Wed,  5 Apr 2000 10:37:38 -0700
-
-sane-gimp1.1 (1.0.1-1999-10-21-11) unstable; urgency=low
-
-  * Add Build-Depends to control files for sane and sane-gimp1.1.
-    (Closes: #60923)
-
- -- Kevin Dalley <kevind@rahul.net>  Mon, 27 Mar 2000 03:16:55 -0800
-
-sane (1.0.1-1999-10-21-10) unstable; urgency=low
-
-  * Improve description in control file. (Closes: #57032)
-  * Link sane-gimp1.1 with libgimp1.1.17, which is the most recent
-    libgimp1.1 in frozen unstable.
-
- -- Kevin Dalley <kevind@rahul.net>  Mon, 28 Feb 2000 02:37:20 +0000
-
-sane (1.0.1-1999-10-21-9) unstable; urgency=low
-
-  * Link sane-gimp1.1 with libgimp1.1.15, which is the most recent
-    libgimp1.1 in frozen unstable.
-
- -- Kevin Dalley <kevind@rahul.net>  Sat, 22 Jan 2000 01:57:55 -0800
-
-sane (1.0.1-1999-10-21-8) unstable; urgency=low
-
-  * sane now conflicts with gimp1.1, which increases the chances of
-    getting the correct versions of gimp with each version of sane.
-    Unfortunately, sane-gimp1.1 cannot conflict with gimp, since
-    gimp1.1 provides gimp. (Closes: #55070)
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 16 Jan 2000 11:41:52 -0800
-
-sane (1.0.1-1999-10-21-7) unstable; urgency=low
-
-  * Link against libgimp1.1.14. (Closes: #53982)
-  * Remove conflict of libsane-gimp1.1 with itself. (Closes: #49709)
-  * Each version of sane and sane-gimp1.1 now depend upon the same release
-    of libsane. (Closes: #50927)
-  * shlibs dependencies are updated to ">= 1.0.1-1999-10-21-7" to reduce
-    chances of problem #50927.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun,  9 Jan 2000 13:22:57 -0800
-
-sane (1.0.1-1999-10-21-6) unstable; urgency=low
-
-  * Add conflict between libsane and older version of sane, sane-gimp1.1
-    due to moving documentation from sane to libsane. (Closes: #50735)
-
- -- Kevin Dalley <kevind@rahul.net>  Sat, 20 Nov 1999 15:15:30 -0400
-
-sane (1.0.1-1999-10-21-5) unstable; urgency=low
-
-  * Add symbolic link to /usr/lib/libsane-dll.so, again.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 19 Nov 1999 00:03:40 -0400
-
-sane (1.0.1-1999-10-21-4) unstable; urgency=low
-
-  * Fix problematic stripping of "libsane.la". (Closes: #50099)
-  * Move much of documentation from the sane package to the libsane
-    and libsane-dev packages.
-  * Move find-scanner to libsane package.
-
- -- Kevin Dalley <kevind@rahul.net>  Wed, 17 Nov 1999 23:08:44 -0400
-
-sane (1.0.1-1999-10-21-3) unstable; urgency=low
-
-  * Add symbolic link for /usr/lib/libsane-dll.so.
-
- -- Kevin Dalley <kevind@rahul.net>  Mon, 25 Oct 1999 01:24:30 -0700
-
-sane (1.0.1-1999-10-21-2) unstable; urgency=low
-
-  * Fix symbolic link for libsane.so.1.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 24 Oct 1999 14:43:14 -0700
-
-sane (1.0.1-1999-10-21-1) unstable; urgency=low
-
-  * New CVS snapshot.
-    + Fixes many bugs in various backends.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 22 Oct 1999 22:06:52 -0700
-
-sane (1.0.1-6) unstable; urgency=low
-
-  * Relink sane-gimp1.1 with libgimp1.1.10
-
- -- Kevin Dalley <kevind@rahul.net>  Thu, 14 Oct 1999 23:33:18 -0700
-
-sane (1.0.1-5) unstable; urgency=low
-
-  * Relink sane-gimp1.1 with libgimp1.1.9
-  * Separate sane-gimp1.1 from sane.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 10 Oct 1999 03:42:37 -0700
-
-sane (1.0.1-4) unstable; urgency=low
-
-  * Added sane-gimp1.1 (used with gimp1.1) at the same time as sane for
-    gimp-1.0.x.
-
- -- Kevin Dalley <kevind@rahul.net>  Wed, 30 Jun 1999 00:54:57 -0700
-
-sane (1.0.1-3) unstable; urgency=low
-
-  * Try to fix problems with shared libraries. Install libsane-dll.so in
-    /usr/lib so that programs linked with libsane will run.
-    (Closes: #37756)
-
- -- Kevin Dalley <kevind@rahul.net>  Mon, 31 May 1999 22:15:16 -0700
-
-sane (1.0.1-2) unstable; urgency=low
-
-  * Remove dependencies for libsane.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 30 Apr 1999 23:08:50 -0700
-
-sane (1.0.1-1) unstable; urgency=low
-
-  * New upstream release.
-  * New backend for Sharp scanners
-  * Update backends for Kodak DC25, HP, Microtek, Micro, Mustek, Nikon
-    Coolscan, snapscan, UMAX.
-  * Fixes a problem with HP scanners. (Closes: #32516)
-  * Includes backend for dc210. (Closes: #31377)
-
- -- Kevin Dalley <kevind@rahul.net>  Tue, 27 Apr 1999 01:24:33 -0700
-
-sane (1.00-2) unstable; urgency=low
-
-  * Removed examples directory. Moved examples/tools to tools directory.
-
- -- Kevin Dalley <kevind@rahul.net>  Mon,  5 Apr 1999 02:04:53 -0700
-
-sane (1.00-1) unstable; urgency=low
-
-  * New upstream release.
-  * Artec backend is back in dll.conf.
-  * Many more scanner are supported now and more changes.
-
- -- Kevin Dalley <kevind@rahul.net>  Sat,  5 Dec 1998 01:00:30 -0800
-
-sane (0.74-2) unstable; urgency=low
-
-  * Temporarily comment out Artec backend in dll.conf, due to bad
-    interaction with Umax scanner. When using an Artec scanner,
-    uncomment "artec" in dll.conf.
-  * Automatically generates conffiles. (Closes: #26545)
-    Thanks to Roman Hodek <roman.hodek@informatik.uni-erlangen.de>.
-  * Fix a problem with creation of /usr/share/sane during the
-    build process. (Closes: #26314)
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 20 Sep 1998 18:00:28 -0700
-
-sane (0.74-1) unstable; urgency=low
-
-  * New upstream release.
-
- -- Kevin Dalley <kevind@rahul.net>  Sat, 22 Aug 1998 23:06:26 -0700
-
-sane (0.72-1) unstable; urgency=low
-
-  * New upstream release.
-  * First official release to support libgtk1-0.99.9.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 10 Apr 1998 02:29:52 -0700
-
-sane (0.71-2) unstable; urgency=low
-
-  * Fixed spelling in control files. (Closes: # 19003)
-  * Modified to match latest change in libgtk-0.99.5
-  * Change datadir to /usr/share/sane
-  * Compatible with libgtk1-0.99.8. (Closes: #19595)
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 22 Mar 1998 19:44:10 -0800
-
-sane (0.71-1) unstable; urgency=low
-
-  * New upstream release.
-    + New backends:
-      - Polaroid Digital Microscope Cameras (DMC)
-      - Apple scanners
-      - Nikon CoolScan
-  * Remove execute permission in doc directory. (Closes: #17949)
-  * Modify manual page referring to symbolic link of xscanimage.
-    (Closes: #18071)
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 27 Feb 1998 23:03:08 -0800
-
-sane (0.70-1) unstable; urgency=low
-
-  * New upstream release:
-    + New and updated backends:
-      - AGFA SnapScan
-      - UMAX scanners
-  * Add patches 2-5 to SnapScan backend which allows other scanners
-    to work as well with the backend
-
- -- Kevin Dalley <kevind@rahul.net>  Sat, 31 Jan 1998 17:32:53 -0800
-
-sane (0.69-2) unstable; urgency=low
-
-  * Modify umax-scanner.h so that Astra 1200S is legal.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 25 Jan 1998 09:44:45 -0800
-
-sane (0.69-1) unstable; urgency=low
-
-  * New upstream release.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri, 23 Jan 1998 20:24:01 -0800
-
-sane (0.68-4) unstable; urgency=low
-
-  * Modify gtkglue.c to correspond with changes to libgtk1.
-
- -- Kevin Dalley <kevind@rahul.net>  Tue,  6 Jan 1998 22:24:14 -0800
-
-sane (0.68-3) unstable; urgency=low
-
-  * Change plug-in directory to 0.99 to match gimp changes,
-    add explicit gimp dependency.
-  * Add README.debian.
-  * Install find-scanner.
-  * Install many documentation files.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri,  2 Jan 1998 21:51:52 -0800
-
-sane (0.68-2) unstable; urgency=low
-
-  * Fix control file.
-
- -- Kevin Dalley <kevind@rahul.net>  Sun, 21 Dec 1997 18:26:23 -0800
-
-sane (0.68-1) unstable; urgency=low
-
-  * New upstream release.
-
- -- Kevin Dalley <kevind@rahul.net>  Fri,  5 Dec 1997 00:42:27 -0800
-
-sane (0.67-1) unstable; urgency=low
-
-  * Initial release.
-
- -- Kevin Dalley <kevind@rahul.net>  Tue, 18 Nov 1997 21:38:41 -0800