Merge branch 'release/experimental/1.0.27-1_experimental1'experimental/1.0.27-1_experimental1

62 files changed, 522 insertions, 106 deletions

diff --git a/doc/descriptions/as6e.desc b/doc/descriptions/as6e.desc
index 5270a80..e269807 100644
--- a/doc/descriptions/as6e.desc
+++ b/doc/descriptions/as6e.desc
@@ -9,7 +9,7 @@
 ;
 
 :backend "as6e"			; name of backend
-:version "0.5"			; version of backend
+:version "0.5 (unmaintained)"	; version of backend
 :manpage "sane-as6e"		; name of manpage (if it exists)
 :url "http://as6edriver.sourceforge.net/"
 
diff --git a/doc/descriptions/bh.desc b/doc/descriptions/bh.desc
index d20715e..cea51d7 100644
--- a/doc/descriptions/bh.desc
+++ b/doc/descriptions/bh.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "bh"                     ; name of backend
-:version "1.0-4"                    ; version of backend
+:version "1.0-4 (unmaintained)"   ; version of backend
 :manpage "sane-bh"                ; name of manpage (if it exists)
 :url "http://www.martoneconsulting.com/sane-bh.html" ; backend's web page
 :comment "Supports Copiscan II scanners with Remote SCSI Controller (RSC) interface"
diff --git a/doc/descriptions/canon630u.desc b/doc/descriptions/canon630u.desc
index b4fa418..c4c3026 100644
--- a/doc/descriptions/canon630u.desc
+++ b/doc/descriptions/canon630u.desc
@@ -11,7 +11,7 @@
 
 :backend "canon630u"                ; name of backend
 :manpage "sane-canon630u"
-:version "0.1"                  ; version of backend
+:version "0.1 (unmaintained)"       ; version of backend
 ;:status :beta
 :url "http://canon-fb630u.sourceforge.net/" ; backend home page
 
diff --git a/doc/descriptions/canon_dr.desc b/doc/descriptions/canon_dr.desc
index 86a8507..8bf6964 100644
--- a/doc/descriptions/canon_dr.desc
+++ b/doc/descriptions/canon_dr.desc
@@ -90,8 +90,8 @@
 
 :model "DR-2010M"
 :interface "USB"
-:status :untested
-:comment "Mac version of DR-2010C? Please test!"
+:status :complete
+:comment "DR-2010C with a different label, same USB IDs"
 
 :model "DR-2050C"
 :interface "USB"
@@ -181,8 +181,8 @@
 :model "DR-5010C"
 :interface "USB"
 :usbid "0x04a9" "0x1606"
-:status :untested
-:comment "Please test!"
+:status :basic
+:comment "ADF and Duplex work, needs more testing"
 
 :model "DR-5020"
 :interface "SCSI"
@@ -289,7 +289,8 @@
 :model "DR-F120"
 :interface "USB"
 :usbid "0x1083" "0x1654"
-:status :untested
+:status :basic
+:comment "Flatbed not working. ADF working. Simplex+duplex, all resolutions <= 600, gray/color, calibration poor."
 
 :model "DR-G1100"
 :interface "USB"
@@ -323,13 +324,14 @@
 
 :model "P-150"
 :interface "USB"
-;:usbid "0x1083" "0x"
+;:usbid "0x1083" "0x162c"
 :status :untested
+:comment "Same as P-150M?"
 
 :model "P-150M"
 :interface "USB"
-;:usbid "0x1083" "0x"
-:status :untested
+:usbid "0x1083" "0x162c"
+:status :good
 
 :model "P-201"
 :interface "USB"
@@ -348,6 +350,12 @@
 :status :basic
 :comment "All modes and resolutions working, but calibration is poor."
 
+:model "P-208"
+:interface "USB"
+:usbid "0x1083" "0x164e"
+:status :basic
+:comment "This is the same device as the 0x164c P-208, but the mode switch on the scanner is in the wrong position, you must move the switch."
+
 :model "DR-P208II"
 :interface "USB"
 :usbid "0x1083" "0x165d"
diff --git a/doc/descriptions/canon_pp.desc b/doc/descriptions/canon_pp.desc
index ddd7a46..6a3613a 100644
--- a/doc/descriptions/canon_pp.desc
+++ b/doc/descriptions/canon_pp.desc
@@ -10,7 +10,7 @@
 
 :backend "canon_pp"		; name of backend
 :manpage "sane-canon_pp"
-:version "0.33"			; version of backend
+:version "0.33 (unmaintained)"	; version of backend
 
 :url "http://canon-fb330p.sourceforge.net" ; backend home page
 
diff --git a/doc/descriptions/cardscan.desc b/doc/descriptions/cardscan.desc
index a0a87db..df106de 100644
--- a/doc/descriptions/cardscan.desc
+++ b/doc/descriptions/cardscan.desc
@@ -11,14 +11,14 @@
 
 :backend "cardscan"              ; name of backend
 :url "http://www.thebility.com/cardscan/" 
-:version "2"                 ; version of backend
+:version "3"                 ; version of backend
 :manpage "sane-cardscan"         ; name of manpage (if it exists)
 :comment "Backend updated for SANE release 1.0.21, see sane-cardscan manpage"
 :devicetype :scanner             ; start of a list of devices....
                                  ; other types:  :stillcam, :vidcam,
                                  ;               :meta, :api
 
-:mfg "Corex"                   ; name a manufacturer
+:mfg "Corex/Dymo"                   ; name a manufacturer
 :url "http://www.cardscan.com/"
 
 :model "800c"
@@ -33,3 +33,11 @@
 :status :basic
 :comment "4 inch wide 8bit Gray or 24bit Color simplex card/receipt scanner"
 
+:mfg "Sanford"                   ; name a manufacturer
+
+:model "800c"
+:interface "USB"
+:usbid "0x0451" "0x6250"
+:status :good
+:comment "4 inch wide 8bit Gray or 24bit Color simplex card/receipt scanner"
+
diff --git a/doc/descriptions/coolscan.desc b/doc/descriptions/coolscan.desc
index 8d7b060..6ccb496 100644
--- a/doc/descriptions/coolscan.desc
+++ b/doc/descriptions/coolscan.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "coolscan"               ; name of backend
-:version "0.4.3"                  ; version of backend
+:version "0.4.3 (unmaintained)"   ; version of backend
 :url "http://andreas.rick.free.fr/sane/" ; backend's web page
 :manpage "sane-coolscan"
 :devicetype :scanner              ; start of a list of devices....
diff --git a/doc/descriptions/coolscan2.desc b/doc/descriptions/coolscan2.desc
index e6c7359..7e34b33 100644
--- a/doc/descriptions/coolscan2.desc
+++ b/doc/descriptions/coolscan2.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "coolscan2"
-:version "0.1.8"
+:version "0.1.8 (unmaintained)"
 :manpage "sane-coolscan2"
 :url "http://coolscan2.sourceforge.net/"
 
diff --git a/doc/descriptions/coolscan3.desc b/doc/descriptions/coolscan3.desc
index d8359bd..136d75f 100644
--- a/doc/descriptions/coolscan3.desc
+++ b/doc/descriptions/coolscan3.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "coolscan3"
-:version "1.0.0"
+:version "1.0.0 (unmaintained)"
 :manpage "sane-coolscan3"
 
 :devicetype :scanner
diff --git a/doc/descriptions/dc210.desc b/doc/descriptions/dc210.desc
index e7dbced..1f6191e 100644
--- a/doc/descriptions/dc210.desc
+++ b/doc/descriptions/dc210.desc
@@ -1,7 +1,7 @@
 ;Kodak DC210 backend .desc file by Brian J. Murrell
 
 :backend "dc210"		; name of backend
-:version "0.0"                  ; version of backend
+:version "0.0 (unmaintained)"	; version of backend
 :manpage "sane-dc210"		; name of manpage (if it exists)
 :url "mailto:peter@fales-lorenz.net"   ; backend's web page
 
diff --git a/doc/descriptions/dc240.desc b/doc/descriptions/dc240.desc
index 5a0b52c..6250ce5 100644
--- a/doc/descriptions/dc240.desc
+++ b/doc/descriptions/dc240.desc
@@ -1,7 +1,7 @@
 ;Kodak DC240 backend .desc file by Peter S. Fales
 
 :backend "dc240"		; name of backend
-:version "0.0"                  ; version of backend
+:version "0.0 (unmaintained)"	; version of backend
 :manpage "sane-dc240"		; name of manpage (if it exists)
 :url "mailto:peter@fales-lorenz.net"   ; backend's web page
 
diff --git a/doc/descriptions/dc25.desc b/doc/descriptions/dc25.desc
index c6996ad..e270521 100644
--- a/doc/descriptions/dc25.desc
+++ b/doc/descriptions/dc25.desc
@@ -1,7 +1,7 @@
 ;Kodak DC25 backend .desc file by Peter Fales
 
 :backend "dc25"				; name of backend
-:version "1.2"  			; version of backend
+:version "1.2 (unmaintained)"		; version of backend
 :manpage "sane-dc25"			; name of manpage (if it exists)
 :url "mailto:peter@fales-lorenz.net";
 :devicetype :stillcam			; start of a list of devices....
diff --git a/doc/descriptions/dell1600n_net.desc b/doc/descriptions/dell1600n_net.desc
index 6aacf18..6759564 100644
--- a/doc/descriptions/dell1600n_net.desc
+++ b/doc/descriptions/dell1600n_net.desc
@@ -3,7 +3,7 @@
 ; Jon Chambers <jon@jon.demon.co.uk>, 2006-05-29
 ;
 :backend "dell1600n_net"
-
+:version "unmaintained"
 :devicetype :scanner
 
 :mfg "Dell"
diff --git a/doc/descriptions/dll.desc b/doc/descriptions/dll.desc
index 4995873..721b7d4 100644
--- a/doc/descriptions/dll.desc
+++ b/doc/descriptions/dll.desc
@@ -1,5 +1,5 @@
 :backend "dll"               ; name of backend
-:version "1.0.13"
+:version "1.0.13 (unmaintained)"
 :manpage "sane-dll"
 :url "mailto:henning@meier-geinitz.de"
 
diff --git a/doc/descriptions/epjitsu.desc b/doc/descriptions/epjitsu.desc
index b11ee96..03bc8fb 100644
--- a/doc/descriptions/epjitsu.desc
+++ b/doc/descriptions/epjitsu.desc
@@ -10,8 +10,7 @@
 ;
 
 :backend "epjitsu"               ; name of backend
-:url "http://www.thebility.com/epjitsu/" 
-:version "27"                    ; version of backend
+:version "31"                    ; version of backend
 :manpage "sane-epjitsu"          ; name of manpage (if it exists)
 :comment "Backend updated for SANE release 1.0.26, see sane-epjitsu manpage"
 :devicetype :scanner             ; start of a list of devices....
@@ -24,15 +23,15 @@
 ;==================================================
 :model "fi-60F"
 :interface "USB"
-:status :basic
+:status :good
 :usbid "0x04c5" "0x10c7"
-:comment "A6-size flatbed, 300/600 dpi, color/gray/binary"
+:comment "A6-size flatbed. Hardware provides 150/200/300/400/600 dpi in color. Software creates other resolutions, plus grayscale and binary modes. Hardware grayscale mode is not used due to poor calibration."
 
 :model "ScanSnap S300"
 :interface "USB"
 :status :good
 :usbid "0x04c5" "0x1156"
-:comment "Duplex, 150/225/300/600 dpi, color/gray/binary, AC/USB power, buttons/sensors all supported. Scanner always scans in _triplex_ color, fast USB required."
+:comment "Letter-size ADF. Hardware provides duplex, 150/225/300/600 dpi in color on AC or USB power. Software creates other resolutions, plus grayscale and binary modes. All buttons and sensors are exposed. Scanner always scans in _triplex_ color, fast USB required."
 
 :model "ScanSnap S300M"
 :interface "USB"
@@ -40,11 +39,11 @@
 :usbid "0x04c5" "0x117f"
 :comment "Same as S300, with different usb id"
 
-:model "ScanSnap S1100"
+:model "fi-65F"
 :interface "USB"
 :status :good
-:usbid "0x04c5" "0x1200"
-:comment "Hardware only supports 300 and 600 dpi simplex color. Backend manufactures gray and binary modes."
+:usbid "0x04c5" "0x11bd"
+:comment "Same as fi-60f, with different usb id. Button support untested."
 
 :model "ScanSnap S1300"
 :interface "USB"
@@ -52,14 +51,20 @@
 :usbid "0x04c5" "0x11ed"
 :comment "Same as S300, with different usb id"
 
+:model "ScanSnap S1100"
+:interface "USB"
+:status :good
+:usbid "0x04c5" "0x1200"
+:comment "Letter-size ADF. Hardware provides simplex, 300/600 dpi in color on USB power. Software creates other resolutions, plus grayscale and binary modes. All buttons and sensors are exposed. Scanner always scans in _triplex_ color, fast USB required."
+
 :model "ScanSnap S1300i"
 :interface "USB"
 :status :good
 :usbid "0x04c5" "0x128d"
-:comment "Similar to S1300."
+:comment "Same as S300, with different usb id"
 
-:model "fi-65F"
+:model "ScanSnap S1100i"
 :interface "USB"
-:status :basic
-;:usbid "0x04c5" "0x10c7"
-:comment "A6-size flatbed, 300/600 dpi, color/gray/binary."
+:status :good
+:usbid "0x04c5" "0x1447"
+:comment "Same as S1100, with different usb id"
diff --git a/doc/descriptions/epson.desc b/doc/descriptions/epson.desc
index 1c9d8a2..65f466f 100644
--- a/doc/descriptions/epson.desc
+++ b/doc/descriptions/epson.desc
@@ -10,8 +10,7 @@
 ;
 
 :backend "epson"                  ; name of backend
-;:version "0.2.42"                ; version of backend
-:version "unmaintained"           ; version of backend
+:version "0.2.42 (unmaintained)"  ; version of backend
 :new :no
 :manpage "sane-epson"             ; name of manpage (if it exists)
 :url "http://www.khk.net/sane"    ; backend's web page
diff --git a/doc/descriptions/epson2.desc b/doc/descriptions/epson2.desc
index de61b76..772a77f 100644
--- a/doc/descriptions/epson2.desc
+++ b/doc/descriptions/epson2.desc
@@ -10,7 +10,7 @@
 ; DO NOT EDIT - It's automatically generated.
 
 :backend "epson2"
-:version "1.0.124"
+:version "1.0.124 (unmaintained)"
 :new :no
 :manpage "sane-epson2"
 
diff --git a/doc/descriptions/epsonds.desc b/doc/descriptions/epsonds.desc
index 0b7c6c6..99121d1 100644
--- a/doc/descriptions/epsonds.desc
+++ b/doc/descriptions/epsonds.desc
@@ -6,8 +6,8 @@
 ;
 
 :backend "epsonds"
-:version "1.0.18"
-:new :yes
+:version "1.0.18 (unmaintained)"
+:new :no
 :manpage "sane-epsonds"
 
 :devicetype :scanner
diff --git a/doc/descriptions/fujitsu.desc b/doc/descriptions/fujitsu.desc
index d4e232b..60f8c5b 100644
--- a/doc/descriptions/fujitsu.desc
+++ b/doc/descriptions/fujitsu.desc
@@ -12,9 +12,9 @@
 
 :backend "fujitsu"               ; name of backend
 :url "http://www.thebility.com/fujitsu/" 
-:version "127"                   ; version of backend
+:version "133"                   ; version of backend
 :manpage "sane-fujitsu"          ; name of manpage (if it exists)
-:comment "Backend updated for SANE release 1.0.25, see sane-fujitsu manpage"
+:comment "Backend updated for SANE release 1.0.26, see sane-fujitsu manpage"
 :devicetype :scanner             ; start of a list of devices....
                                  ; other types:  :stillcam, :vidcam,
                                  ;               :meta, :api
@@ -131,6 +131,12 @@
 :usbid "0x04c5" "0x116f"
 :comment "small, recent, discontinued"
 
+:model "fi-6125"
+:interface "USB"
+:status :complete
+:usbid "0x04c5" "0x11ee"
+:comment "small, recent, discontinued"
+
 :model "fi-6130"
 :interface "USB"
 :status :complete
@@ -155,6 +161,42 @@
 :usbid "0x04c5" "0x11f4"
 :comment "small, recent, discontinued"
 
+:model "fi-6120ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x146d"
+:comment "small, recent, discontinued, expected to work"
+
+:model "fi-6220ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x146e"
+:comment "small, recent, discontinued, expected to work"
+
+:model "fi-6125ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x1463"
+:comment "small, recent, discontinued, expected to work"
+
+:model "fi-6225ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x1464"
+:comment "small, recent, discontinued, expected to work"
+
+:model "fi-6130ZLA"
+:interface "SCSI USB"
+:status :complete
+:usbid "0x04c5" "0x1461"
+:comment "small, recent, discontinued"
+
+:model "fi-6230ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x1462"
+:comment "small, recent, discontinued, expected to work"
+
 :model "ScanSnap S1500"
 :interface "USB"
 :status :complete
@@ -319,7 +361,7 @@
 :usbid "0x04c5" "0x114e"
 :comment "medium, recent, discontinued"
 
-:model "fi-6140Z"
+:model "fi-6140Z/fi-6140ZLA"
 :interface "SCSI USB"
 :status :complete
 :usbid "0x04c5" "0x11f1"
@@ -331,6 +373,30 @@
 :usbid "0x04c5" "0x11f2"
 :comment "medium, recent, discontinued"
 
+:model "fi-6135ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x146b"
+:comment "medium, recent, discontinued, expected to work"
+
+:model "fi-6235ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x146c"
+:comment "medium, recent, discontinued, expected to work"
+
+:model "fi-6140ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x145f"
+:comment "medium, recent, discontinued, expected to work"
+
+:model "fi-6240ZLA"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x1460"
+:comment "medium, recent, discontinued, expected to work"
+
 ;==================================================
 ; CURRENT MODELS, MEDIUM
 
@@ -486,5 +552,131 @@
 
 :model "fi-6400"
 :interface "SCSI USB"
+:status :good
+:usbid "0x04c5" "0x14ac"
+
+;==================================================
+; 2015/2016/2017 NEW MODELS, UNORDERED
+
+:model "fi-6420"
+:interface "SCSI USB"
+:status :untested
+:usbid "0x04c5" "0x14bd"
+
+:model "fi-6225"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x11ef"
+
+:model "ScanSnap iX500EE"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x13f3"
+
+:model "ScanPartner SP25"
+:interface "USB"
+:status :unsupported
+:usbid "0x04c5" "0x1409"
+:comment "Possibly Genesys protocol?"
+
+:model "ScanPartner SP30"
+:interface "USB"
+:status :unsupported
+:usbid "0x04c5" "0x140a"
+:comment "Possibly Genesys protocol?"
+
+:model "ScanPartner SP30F"
+:interface "USB"
+:status :unsupported
+:usbid "0x04c5" "0x140c"
+:comment "Possibly Genesys protocol?"
+
+:model "N7100"
+:interface "USB Ethernet"
+:status :untested
+:usbid "0x04c5" "0x146f"
+
+:model "fi-7480"
+:interface "USB"
+:status :good
+:usbid "0x04c5" "0x14b8"
+
+:model "fi-7460"
+:interface "USB"
+:status :good
+:usbid "0x04c5" "0x14be"
+
+:model "fi-7140"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14df"
+
+:model "fi-7240"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e0"
+
+:model "fi-7135"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e1"
+
+:model "fi-7235"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e2"
+
+:model "fi-7130"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e3"
+
+:model "fi-7230"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e4"
+
+:model "fi-7125"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e5"
+
+:model "fi-7225"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e6"
+
+:model "fi-7120"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e7"
+
+:model "fi-7220"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x14e8"
+
+:model "fi-400F"
+:interface "USB"
+:status :untested
+:usbid "0x04c5" "0x151e"
+
+:model "fi-7030"
+:interface "USB"
+:status :good
+:usbid "0x04c5" "0x151f"
+
+:model "fi-7700"
+:interface "USB"
+:status :good
+:usbid "0x04c5" "0x1520"
+
+:model "fi-7600"
+:interface "USB"
+:status :good
+:usbid "0x04c5" "0x1521"
+
+:model "fi-7700S"
+:interface "USB"
 :status :untested
-;:usbid "0x04c5" "0x"
+:usbid "0x04c5" "0x1522"
diff --git a/doc/descriptions/genesys.desc b/doc/descriptions/genesys.desc
index 6d400f2..f6fb8a3 100644
--- a/doc/descriptions/genesys.desc
+++ b/doc/descriptions/genesys.desc
@@ -148,7 +148,7 @@
 :model "CanoScan LiDE 120"
 :interface "USB"
 :usbid "0x04a9" "0x190e"
-:status :unsupported
+:status :complete
 :comment "GL124+ based, resolution from 75 to 2400 dpi"
 
 :model "CanoScan LiDE 200"
diff --git a/doc/descriptions/gphoto2.desc b/doc/descriptions/gphoto2.desc
index 48dd8ee..f341649 100644
--- a/doc/descriptions/gphoto2.desc
+++ b/doc/descriptions/gphoto2.desc
@@ -1,7 +1,7 @@
 ;gphoto2 backend .desc file by Peter S. Fales
 
 :backend "gphoto2"		; name of backend
-:version "0.0"                  ; version of backend
+:version "0.0 (unmaintained)"	; version of backend
 :manpage "sane-gphoto2"		; name of manpage (if it exists)
 :url "mailto:peter@fales-lorenz.net"   ; backend's web page
 
diff --git a/doc/descriptions/gt68xx.desc b/doc/descriptions/gt68xx.desc
index 5bc8f0e..16e4af9 100644
--- a/doc/descriptions/gt68xx.desc
+++ b/doc/descriptions/gt68xx.desc
@@ -1,5 +1,5 @@
 :backend "gt68xx"
-:version "1.0-84"
+:version "1.0-84 (unmaintained)"
 :manpage "sane-gt68xx"
 :url "http://www.meier-geinitz.de/sane/gt68xx-backend/"
 :comment "Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek and the MA-1509 backend."
diff --git a/doc/descriptions/hp3900.desc b/doc/descriptions/hp3900.desc
index f2abaad..d1aa9a1 100644
--- a/doc/descriptions/hp3900.desc
+++ b/doc/descriptions/hp3900.desc
@@ -10,7 +10,7 @@
 ; See doc/descriptions.txt for details.
 
 :backend "hp3900"
-:version "0.12"
+:version "0.12 (unmaintained)"
 :manpage "sane-hp3900"
 :url "http://sourceforge.net/projects/hp3900-series/"
 :comment "Still Beta"
diff --git a/doc/descriptions/hp4200.desc b/doc/descriptions/hp4200.desc
index 69f7e1d..6c25882 100644
--- a/doc/descriptions/hp4200.desc
+++ b/doc/descriptions/hp4200.desc
@@ -10,7 +10,7 @@
 
 
 :backend "hp4200"               ; name of backend
-:version "1.0-2"                    ; version of backend
+:version "1.0-2 (unmaintained)" ; version of backend
 :manpage "sane-hp4200"           ; name of manpage (if it exists)
 :url "http://hp4200-backend.sourceforge.net" ; backend's web page
 
diff --git a/doc/descriptions/hp5400.desc b/doc/descriptions/hp5400.desc
index c4cb528..49d386f 100644
--- a/doc/descriptions/hp5400.desc
+++ b/doc/descriptions/hp5400.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "hp5400"		; name of backend
-:version "1.0-2"		; version of backend
+:version "1.0-2 (unmaintained)"	; version of backend
 :manpage "sane-hp5400"		; name of manpage (if it exists)
 :url "http://sourceforge.net/projects/hp5400backend"  ; backend's web page
 :comment "HP5400 and HP5470 scanners. Prototype backend available"
@@ -37,6 +37,7 @@
 
 :model "ScanJet 5490c"		; name models for above-specified mfg.
 :interface "USB"		; interface type of the device:
+:usbid "0x03f0" "0x1105"
 :status :basic
 
 
diff --git a/doc/descriptions/hpljm1005.desc b/doc/descriptions/hpljm1005.desc
index 12876e4..d60142b 100644
--- a/doc/descriptions/hpljm1005.desc
+++ b/doc/descriptions/hpljm1005.desc
@@ -9,7 +9,7 @@
 ; All other information is optional (but what good is the file without it?).
 
 :backend "hpljm1005"
-:version "0"
+:version "0 (unmaintained)"
 :manpage "sane-hpljm1005"
 
 :devicetype :scanner
diff --git a/doc/descriptions/hpsj5s.desc b/doc/descriptions/hpsj5s.desc
index 87057e6..c4bc100 100644
--- a/doc/descriptions/hpsj5s.desc
+++ b/doc/descriptions/hpsj5s.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "hpsj5s"                 ; name of backend
-:version "0.03"                   ; version of backend
+:version "0.03 (unmaintained)"    ; version of backend
 ;:status :alpha                     ; :alpha, :beta, :stable, :new
 :manpage "sane-hpsj5s"                ; name of manpage (if it exists)
 :url "http://hpsj5s.sourceforge.net/" ; backend's web page
diff --git a/doc/descriptions/ibm.desc b/doc/descriptions/ibm.desc
index d3d5b06..c04fa31 100644
--- a/doc/descriptions/ibm.desc
+++ b/doc/descriptions/ibm.desc
@@ -10,7 +10,7 @@
 
 :backend "ibm"                 ; name of backend
 :url "http://www.meier-geinitz.de/sane/ibm-backend/"
-:version "1.0-4"          ; version of backend
+:version "1.0-4 (unmaintained)" ; version of backend
 ;
 :manpage "sane-ibm"            ; name of manpage (if it exists)
 :comment "This backend has had only limited testing. It needs more work especially for the Ricoh scanners. Patches are welcome."
diff --git a/doc/descriptions/leo.desc b/doc/descriptions/leo.desc
index 279300c..cf0cec3 100644
--- a/doc/descriptions/leo.desc
+++ b/doc/descriptions/leo.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "leo"                    ; name of backend
-:version "1.0-10"                  ; version of backend
+:version "1.0-10 (unmaintained)"  ; version of backend
 :manpage "sane-leo"               ; name of manpage (if it exists)
 :url "http://www.zago.net/sane/#leo" ; backend's web page
 
diff --git a/doc/descriptions/lexmark.desc b/doc/descriptions/lexmark.desc
index 2cc4de1..ac0b97c 100644
--- a/doc/descriptions/lexmark.desc
+++ b/doc/descriptions/lexmark.desc
@@ -10,7 +10,7 @@
 
 
 :backend "lexmark"                ; name of backend
-:version "1.0-0"                  ; version of backend (or "unmaintained")
+:version "1.0-0 (unmaintained)"   ; version of backend (or "unmaintained")
 :manpage "sane-lexmark"           ; name of manpage (if it exists)
 :url "http://stef.dev.free.fr/sane/lexmark"
 				  ; backend's web page
diff --git a/doc/descriptions/ma1509.desc b/doc/descriptions/ma1509.desc
index db78a55..d28aeed 100644
--- a/doc/descriptions/ma1509.desc
+++ b/doc/descriptions/ma1509.desc
@@ -9,7 +9,7 @@
 ;
 
 :backend "ma1509"		; name of backend
-:version "1.0-3"			; version of backend
+:version "1.0-3 (unmaintained)"	; version of backend
 :manpage "sane-ma1509"		; name of manpage (if it exists)
 :url "http://www.meier-geinitz.de/sane/ma1509-backend/"  ; backend's web page
 
diff --git a/doc/descriptions/magicolor.desc b/doc/descriptions/magicolor.desc
index be785e9..7f0c341 100644
--- a/doc/descriptions/magicolor.desc
+++ b/doc/descriptions/magicolor.desc
@@ -6,7 +6,7 @@
 ;
 
 :backend "magicolor"
-:version "1.0.0"
+:version "1.0.0 (unmaintained)"
 :manpage "sane-magicolor"
 :url "http://wiki.kainhofer.com/hardware/magicolor_scan"
 
diff --git a/doc/descriptions/matsushita.desc b/doc/descriptions/matsushita.desc
index e7822f8..51f330f 100644
--- a/doc/descriptions/matsushita.desc
+++ b/doc/descriptions/matsushita.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "matsushita"             ; name of backend
-:version "1.0-7"                  ; version of backend
+:version "1.0-7 (unmaintained)"   ; version of backend
 :manpage "sane-matsushita"        ; name of manpage
 :url "http://www.zago.net/sane"    ; backend's web page
 
diff --git a/doc/descriptions/microtek.desc b/doc/descriptions/microtek.desc
index 214bb9a..09203f5 100644
--- a/doc/descriptions/microtek.desc
+++ b/doc/descriptions/microtek.desc
@@ -1,5 +1,5 @@
 :backend "microtek"
-:version "0.13.1"
+:version "0.13.1 (unmaintained)"
 :manpage "sane-microtek" 
 :url "http://www.mir.com/mtek/"
 
diff --git a/doc/descriptions/mustek.desc b/doc/descriptions/mustek.desc
index cefea83..2ba44f1 100644
--- a/doc/descriptions/mustek.desc
+++ b/doc/descriptions/mustek.desc
@@ -9,7 +9,7 @@
 ;
 
 :backend "mustek"		; name of backend
-:version "1.0-138"		; version of backend
+:version "1.0-138 (unmaintained)"	; version of backend
 :manpage "sane-mustek"		; name of manpage (if it exists)
 :url "http://www.meier-geinitz.de/sane/mustek-backend/"
 :comment "Most Mustek SCSI scanners are supported by this backend. For USB scanners, look at the mustek_usb backend."
diff --git a/doc/descriptions/mustek_pp.desc b/doc/descriptions/mustek_pp.desc
index 4a32988..1586b8b 100644
--- a/doc/descriptions/mustek_pp.desc
+++ b/doc/descriptions/mustek_pp.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "mustek_pp"              ; name of backend
-:version "13"                     ; version of backend
+:version "13 (unmaintained)"      ; version of backend
 :manpage "sane-mustek_pp"         ; name of manpage (if it exists)
                                   ; backend's web page
 :url "http://penguin-breeder.org/sane/mustek_pp/"
diff --git a/doc/descriptions/mustek_usb.desc b/doc/descriptions/mustek_usb.desc
index 5cee3d2..b03edbd 100644
--- a/doc/descriptions/mustek_usb.desc
+++ b/doc/descriptions/mustek_usb.desc
@@ -1,5 +1,5 @@
 :backend "mustek_usb"
-:version "1.0-18"
+:version "1.0-18 (unmaintained)"
 :manpage "sane-mustek_usb"
 :url "http://www.meier-geinitz.de/sane/mustek_usb-backend/"
 :comment "Only the USB scanners mentioned below are supported. For BearPaws, look at the Plustek, MA-1509, and gt68xx backends."
diff --git a/doc/descriptions/mustek_usb2.desc b/doc/descriptions/mustek_usb2.desc
index 011cef9..ec5b967 100644
--- a/doc/descriptions/mustek_usb2.desc
+++ b/doc/descriptions/mustek_usb2.desc
@@ -1,5 +1,5 @@
 :backend "mustek_usb2"
-:version "1.0-10"
+:version "1.0-10 (unmaintained)"
 :manpage "sane-mustek_usb2"
 :url "http://www.meier-geinitz.de/sane/mustek_usb2-backend/"
 :comment "Only BearPaw 2448TA Pro is supported at the moment"
diff --git a/doc/descriptions/nec.desc b/doc/descriptions/nec.desc
index e8ce961..3817089 100644
--- a/doc/descriptions/nec.desc
+++ b/doc/descriptions/nec.desc
@@ -1,5 +1,5 @@
 :backend "nec"                  ; name of backend
-:version "0.12"                 ; version of backend
+:version "0.12 (unmaintained)"  ; version of backend
 :url "http://www5a.biglobe.ne.jp/~saetaka/"
 				; backend's homepage
 :manpage "sane-nec"
diff --git a/doc/descriptions/net.desc b/doc/descriptions/net.desc
index 1807c49..cece232 100644
--- a/doc/descriptions/net.desc
+++ b/doc/descriptions/net.desc
@@ -1,5 +1,5 @@
 :backend "net"               ; name of backend
-:version "1.0.14"
+:version "1.0.14 (unmaintained)"
 :manpage "sane-net"
 :url "http://www.penguin-breeder.org/?page=sane-net"
 
diff --git a/doc/descriptions/niash.desc b/doc/descriptions/niash.desc
index 960468c..9be55f2 100644
--- a/doc/descriptions/niash.desc
+++ b/doc/descriptions/niash.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "niash"
-:version "0.3"
+:version "0.3 (unmaintained)"
 :manpage "sane-niash"
 :url "http://sourceforge.net/projects/hp3300backend"
 
diff --git a/doc/descriptions/p5.desc b/doc/descriptions/p5.desc
index 70adf16..7548902 100644
--- a/doc/descriptions/p5.desc
+++ b/doc/descriptions/p5.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "p5"              ; name of backend
-:version "1"               ; version of backend
+:version "1 (unmaintained)"; version of backend
 :manpage "sane-p5"         ; name of manpage (if it exists)
 :comment "New backend for SANE release 1.0.21, see sane-p5 manpage"
 :url "http://www.sane-project.org/" ; backend's web page
diff --git a/doc/descriptions/pie.desc b/doc/descriptions/pie.desc
index 45abb8e..9d9177e 100644
--- a/doc/descriptions/pie.desc
+++ b/doc/descriptions/pie.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "pie"                    ; name of backend
-:version "1.0"                    ; version of backend
+:version "1.0 (unmaintained)"     ; version of backend
 :manpage "sane-pie"               ; name of manpage (if it exists)
 :url "http://www.munton.demon.co.uk/sane"  ; backend's web page
 
diff --git a/doc/descriptions/pieusb.desc b/doc/descriptions/pieusb.desc
index 102cd45..c0d17a9 100644
--- a/doc/descriptions/pieusb.desc
+++ b/doc/descriptions/pieusb.desc
@@ -10,8 +10,8 @@
 ;
 
 :backend "pieusb"                 ; name of backend
-:version "1.0"                    ; version of backend
-:new :yes
+:version "1.0 (unmaintained)"     ; version of backend
+:new :no
 :manpage "sane-pieusb"            ; name of manpage (if it exists)
 :url "https://github.com/kkaempf/sane-backends"  ; backend's web page
 
@@ -24,33 +24,47 @@
 
 :model "PowerSlide 3600"
 :interface "USB"
+:usbid "0x05e3" "0x0142"
 :status :untested
 :comment "Identical to Reflecta DigitDia 3600"
 
 :model "PowerSlide 3650"
 :interface "USB"
-:status :untested
+:usbid "0x05e3" "0x0142"
+:status :basic
 :comment "Identical to Reflecta DigitDia 4000"
 
 :model "PowerSlide 4000"
 :interface "USB"
-:status :untested
+:usbid "0x05e3" "0x0142"
+:status :basic
 :comment "Identical to Reflecta DigitDia 5000"
 
 :model "PowerSlide 5000"
 :interface "USB"
-:status :untested
+:usbid "0x05e3" "0x0142"
+:status :basic
 :comment "Identical to Reflecta DigitDia 6000"
 
 :mfg "Reflecta"
 :url "https://reflecta.de"
 
-:model "Reflecta ProScan 7200"
+:model "Reflecta ProScan 10T"
 :interface "USB"
 :usbid "0x05e3" "0x0145"
 :status :basic
+
+:model "Reflecta ProScan 7200"
+:interface "USB"
+:usbid "0x05e3" "0x0145"
+:status :good
 :comment "Similar to PrimeFilm 7250 scanner from Pacific Image Electronics"
 
+:model "CrystalScan 3600"
+:interface "USB"
+:usbid 0x05e3 0x0145
+:status :basic
+
 :model "CrystalScan 7200"
 :interface "USB"
 :status :untested
@@ -63,16 +77,19 @@
 
 :model "DigitDia 3600"
 :interface "USB"
+:usbid "0x05e3" "0x0142"
 :status :untested
 :comment "Identical to Pacific Image Electronics PowerSlide 3600 scanner"
 
 :model "DigitDia 4000"
 :interface "USB"
-:status :untested
+:usbid "0x05e3" "0x0142"
+:status :basic
 :comment "Identical to Pacific Image Electronics PowerSlide 3650 scanner"
 
 :model "DigitDia 5000"
 :interface "USB"
+:usbid "0x05e3" "0x0142"
 :status :untested
 :comment "Identical to Pacific Image Electronics PowerSlide 4000 scanner"
 
diff --git a/doc/descriptions/pixma.desc b/doc/descriptions/pixma.desc
index 84ddcd4..ad33faa 100644
--- a/doc/descriptions/pixma.desc
+++ b/doc/descriptions/pixma.desc
@@ -11,7 +11,7 @@
 ; See doc/descriptions.txt for details.
 
 :backend "pixma"                  ; name of backend
-:version "0.17.23"                ; version of backend (or "unmaintained")
+:version "0.17.37"                ; version of backend (or "unmaintained")
 :manpage "sane-pixma"             ; name of manpage (if it exists)
 ;:comment "Devices marked as experimantal are disabled by default. See the manual page for how to enable them."
 
@@ -34,6 +34,12 @@
 :status :untested
 :comment "Testers needed!"
 
+:model "PIXMA E470 Series"
+:interface "USB"
+:usbid "0x04a9" "0x180c"
+:status :untested
+:comment "Testers needed!"
+
 :model "PIXMA E480 Series"
 :interface "USB WiFi"
 :usbid "0x04a9" "0x1789"
@@ -70,6 +76,12 @@
 :status :untested
 :comment "Testers needed!"
 
+:model "PIXMA G3000"
+:interface "USB WIFI"
+:usbid "0x04a9" "0x181d"
+:status :untested
+:comment "Testers needed!"
+
 :model "PIXMA MG2100 Series"
 :interface "USB"
 :usbid "0x04a9" "0x1751"
@@ -100,6 +112,12 @@
 :status :complete
 :comment "All resolutions supported (up to 600DPI)."
 
+:model "PIXMA MG3000 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x180b"
+:status :untested
+:comment "Testers needed!"
+
 :model "PIXMA MG3100 Series"
 :interface "USB WiFi"
 :usbid "0x04a9" "0x1752"
@@ -121,8 +139,8 @@
 :model "PIXMA MG3600 Series"
 :interface "USB Ethernet WiFi"
 :usbid "0x04a9" "0x178a"
-:status :untested
-:comment "Testers needed!"
+:status :complete
+:comment "All resolutions supported (up to 1200DPI)."
 
 :model "PIXMA MG4100 Series"
 :interface "USB"
@@ -155,10 +173,10 @@
 :comment "All resolutions supported (up to 2400DPI)."
 
 :model "PIXMA MG5400 Series"
-:interface "USB"
+:interface "USB WiFi"
 :usbid "0x04a9" "0x1764"
-:status :untested
-:comment "Testers needed!"
+:status :complete
+:comment "All resolutions supported (up to 2400DPI)."
 
 :model "PIXMA MG5500 Series"
 :interface "USB WiFi"
@@ -172,6 +190,12 @@
 :status :complete
 :comment "All resolutions supported (up to 1200DPI)."
 
+:model "PIXMA MG5700 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x178e"
+:status :complete
+:comment "All resolutions supported (up to 1200 DPI)."
+
 :model "PIXMA MG6100 Series"
 :interface "USB"
 :usbid "0x04a9" "0x174a"
@@ -208,6 +232,18 @@
 :status :untested
 :comment "Testers needed!"
 
+:model "PIXMA MG6800 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x178d"
+:status :untested
+:comment "Testers needed!"
+
+:model "PIXMA MG6900 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x178c"
+:status :untested
+:comment "Testers needed!"
+
 :model "PIXMA MG7100 Series"
 :interface "USB"
 :usbid "0x04a9" "0x1772"
@@ -220,6 +256,12 @@
 :status :complete
 :comment "All resolutions supported (up to 2400DPI)."
 
+:model "PIXMA MG7700 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x178b"
+:status :complete
+:comment "All resolutions supported (up to 2400DPI)."
+
 :model "PIXMA MG8100 Series"
 :interface "USB"
 :usbid "0x04a9" "0x174b"
@@ -232,6 +274,18 @@
 :status :complete
 :comment "All resolutions supported (up to 4800DPI)."
 
+:model "PIXUS MP5"
+:interface "USB"
+:usbid "0x04a9" "0x2635"
+:status :untested
+:comment "Testers needed! Identical with imageCLASS MPC190."
+
+:model "PIXUS MP10"
+:interface "USB"
+:usbid "0x04a9" "0x261f"
+:status :complete
+:comment "All resolutions supported (up to 600DPI). Identical with imageCLASS MPC200."
+
 :model "PIXMA MP140"
 :interface "USB"
 :usbid "0x04a9" "0x172b"
@@ -737,6 +791,30 @@
 :status :complete
 :comment "Flatbed and ADF scan. All resolutions supported (up to 4800DPI)"
 
+:model "PIXMA TS9000 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x179f"
+:status :untested
+:comment "Testers needed!"
+
+:model "PIXMA TS8000 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x1800"
+:status :untested
+:comment "Testers needed!"
+
+:model "PIXMA TS6000 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x1801"
+:status :untested
+:comment "Testers needed!"
+
+:model "PIXMA TS5000 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x1802"
+:status :untested
+:comment "Testers needed!"
+
 :model "imageCLASS D420"
 :interface "USB"
 :usbid "0x04a9" "0x26ef"
@@ -767,6 +845,18 @@
 :status :untested
 :comment "Testers needed!"
 
+:model "i-SENSYS MF230 Series"
+:interface "USB WiFi"
+:usbid "0x04a9" "0x27d1"
+:status :complete
+:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI). WiFi only for w Types."
+
+:model "i-SENSYS MF240 Series"
+:interface "USB Ethernet WiFi"
+:usbid "0x04a9" "0x27d2"
+:status :complete
+:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI). ADF only 300DPI."
+
 :model "i-SENSYS MF810/820"
 :interface "USB Ethernet"
 :usbid "0x04a9" "0x27a6"
@@ -956,10 +1046,10 @@
 :model "i-SENSYS MF6100 Series"
 :interface "USB Ethernet"
 :usbid "0x04a9" "0x278e"
-:status :untested
-:comment "Testers needed!"
+:status :complete
+:comment "Flatbed and ADF scan.  All resolutions supported (up to 600DPI). Note: document feeder does not have 600DPI capability."
 
-:model "imageCLASS MF6500 series"
+:model "imageCLASS MF6500 Series"
 :interface "USB"
 :usbid "0x04a9" "0x2686"
 :status :complete
@@ -1007,6 +1097,18 @@
 :status :untested
 :comment "Same protocol as MF8200C Series? Testers needed!"
 
+:model "imageCLASS MPC190"
+:interface "USB"
+:usbid "0x04a9" "0x2635"
+:status :untested
+:comment "Testers needed! Identical with SmartBase MPC190 and PIXUS MP5."
+
+:model "imageCLASS MPC200"
+:interface "USB"
+:usbid "0x04a9" "0x261f"
+:status :complete
+:comment "All resolutions supported (up to 600DPI). Identical with SmartBase MPC200 and PIXUS MP10."
+
 :model "imageRUNNER 1020/1024/1025"
 :interface "USB"
 :usbid "0x04a9" "0x26e6"
@@ -1034,8 +1136,8 @@
 :model "MAXIFY MB5000 Series"
 :interface "USB"
 :usbid "0x04a9" "0x1776"
-:status :untested
-:comment "Testers needed!"
+:status :complete
+:comment "Flatbed works, All resolutions supported (up to 1200DPI), ADF does not work"
 
 :model "MAXIFY MB5300 Series"
 :interface "USB"
diff --git a/doc/descriptions/pnm.desc b/doc/descriptions/pnm.desc
index 7daeee1..9920b78 100644
--- a/doc/descriptions/pnm.desc
+++ b/doc/descriptions/pnm.desc
@@ -1,5 +1,5 @@
 :backend "pnm"
-:version "1.0.8"
+:version "1.0.8 (unmaintained)"
 :manpage "sane-pnm"
 :url "mailto:henning@meier-geinitz.de"
 
diff --git a/doc/descriptions/rts8891.desc b/doc/descriptions/rts8891.desc
index 7e30ea4..e37f158 100644
--- a/doc/descriptions/rts8891.desc
+++ b/doc/descriptions/rts8891.desc
@@ -10,7 +10,7 @@
 
 
 :backend "rts8891"               ; name of backend
-:version "1.0-0"                    ; version of backend (or "unmaintained")
+:version "1.0-0 (unmaintained)"  ; version of backend (or "unmaintained")
 :manpage "sane-rts8891"        ; name of manpage (if it exists)
 :url "http://stef.dev.free.fr/sane/rts8891/index.html" 
 				  ; backend's web page
diff --git a/doc/descriptions/sceptre.desc b/doc/descriptions/sceptre.desc
index e39559c..aa4f515 100644
--- a/doc/descriptions/sceptre.desc
+++ b/doc/descriptions/sceptre.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "sceptre"
-:version "1.0-10"                  ; version of backend
+:version "1.0-10 (unmaintained)"   ; version of backend
 :manpage "sane-sceptre"           ; name of manpage
 :url "http://www.zago.net/sane/"   ; backend's web page
 
diff --git a/doc/descriptions/sharp.desc b/doc/descriptions/sharp.desc
index 85fde0c..63000af 100644
--- a/doc/descriptions/sharp.desc
+++ b/doc/descriptions/sharp.desc
@@ -1,5 +1,5 @@
 :backend "sharp"                ; name of backend
-:version "0.32"                 ; version of backend
+:version "0.32 (unmaintained)"  ; version of backend
 ;:status :beta                   ; :alpha, :beta, :stable, :new
 :url "http://www.satzbau-gmbh.de/staff/abel/sane-sharp.html" 
 				; backend's homepage
diff --git a/doc/descriptions/sm3600.desc b/doc/descriptions/sm3600.desc
index 760b4cf..56e31e1 100644
--- a/doc/descriptions/sm3600.desc
+++ b/doc/descriptions/sm3600.desc
@@ -7,7 +7,7 @@
 ;
 
 :backend "sm3600"                 ; name of backend
-:version "0.1"                    ; version of backend
+:version "0.1 (unmaintained)"     ; version of backend
 :manpage "sane-sm3600"            ; name of manpage (if it exists)
 :url "http://sm3600.sourceforge.net/" ; backend's web page
 
diff --git a/doc/descriptions/sm3840.desc b/doc/descriptions/sm3840.desc
index 6d60ace..e40193f 100644
--- a/doc/descriptions/sm3840.desc
+++ b/doc/descriptions/sm3840.desc
@@ -11,7 +11,7 @@
 ; See doc/descriptions.txt for details.
 
 :backend "sm3840"                 ; name of backend
-:version "1.1"                    ; version of backend (or "unmaintained")
+:version "1.1 (unmaintained)"     ; version of backend (or "unmaintained")
 :manpage "sane-sm3840"          ; name of manpage (if it exists)
 :url "http://www.ziplabel.com/sm3840/" ; backend's web page
 :comment "This reverse-engineered backend supports the USB ScanMaker 3840 model" 
diff --git a/doc/descriptions/st400.desc b/doc/descriptions/st400.desc
index ca3de68..6cd3a08 100644
--- a/doc/descriptions/st400.desc
+++ b/doc/descriptions/st400.desc
@@ -1,7 +1,7 @@
 ; ST400 backend .desc by Ingo Wilken
 
 :backend "st400"			; name of backend
-:version "1.6"                        ; version number
+:version "1.6 (unmaintained)"		; version number
 :manpage "sane-st400"		; name of manpage (if it exists)
 :url "http://www.informatik.uni-oldenburg.de/~ingo/sane/" ; backend's web page
 
diff --git a/doc/descriptions/stv680.desc b/doc/descriptions/stv680.desc
index fee96d7..d54e6be 100644
--- a/doc/descriptions/stv680.desc
+++ b/doc/descriptions/stv680.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "stv680"                  ; name of backend
-:version "1.0-1"                   ; version of backend
+:version "1.0-1 (unmaintained)"    ; version of backend
 :manpage "sane-stv680"
 :url "http://gkall.hobby.nl/stv680-aiptek.html" ; backend's web page
 :comment "This vidcam backend is for the stv0680 chipset, See the website for more info."
diff --git a/doc/descriptions/teco1.desc b/doc/descriptions/teco1.desc
index 89ac03f..e5b4132 100644
--- a/doc/descriptions/teco1.desc
+++ b/doc/descriptions/teco1.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "teco1"                  ; name of backend
-:version "1.0-10"                 ; version of backend
+:version "1.0-10 (unmaintained)"  ; version of backend
 :manpage "sane-teco1"             ; name of manpage (if it exists)
 :url "http://www.zago.net/sane/#teco"    ; backend's web page
 
diff --git a/doc/descriptions/teco2.desc b/doc/descriptions/teco2.desc
index 23479ab..ec0e686 100644
--- a/doc/descriptions/teco2.desc
+++ b/doc/descriptions/teco2.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "teco2"                  ; name of backend
-:version "1.0-9"                  ; version of backend
+:version "1.0-9 (unmaintained)"   ; version of backend
 :manpage "sane-teco2"
 :url "http://gkall.hobby.nl/teco2.html"   ; backend's web page
 
diff --git a/doc/descriptions/teco3.desc b/doc/descriptions/teco3.desc
index f551309..a2f3e92 100644
--- a/doc/descriptions/teco3.desc
+++ b/doc/descriptions/teco3.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "teco3"                  ; name of backend
-:version "1.0-1"                  ; version of backend
+:version "1.0-1 (unmaintained)"   ; version of backend
 :manpage "sane-teco3"             ; name of manpage (if it exists)
 :url "http://www.zago.net/sane/#teco3"    ; backend's web page
 
diff --git a/doc/descriptions/test.desc b/doc/descriptions/test.desc
index cf27e87..657c2ea 100644
--- a/doc/descriptions/test.desc
+++ b/doc/descriptions/test.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "test"               ; name of backend
-:version "1.0-28"                    ; version of backend
+:version "1.0-28 (unmaintained)"     ; version of backend
 :manpage "sane-test"           ; name of manpage (if it exists)
 :url "http://www.meier-geinitz.de/sane/test-backend/" ; backend's web page
 
diff --git a/doc/descriptions/umax.desc b/doc/descriptions/umax.desc
index 73525a5..8f5a22b 100644
--- a/doc/descriptions/umax.desc
+++ b/doc/descriptions/umax.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "umax"                   ; name of backend
-:version "1.0-41"                 ; version of backend
+:version "1.0-41 (unmaintained)"  ; version of backend
 :manpage "sane-umax"              ; name of manpage (if it exists)
 :url "http://www.rauch-domain.de/sane-umax/index.html" ; backend's web page
 
diff --git a/doc/descriptions/umax_pp.desc b/doc/descriptions/umax_pp.desc
index fb3bf3f..e07a4a0 100644
--- a/doc/descriptions/umax_pp.desc
+++ b/doc/descriptions/umax_pp.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "umax_pp"              ; name of backend
-:version "1"                      ; version of backend
+:version "1 (unmaintained)"     ; version of backend
 :manpage "sane-umax_pp"         ; name of manpage (if it exists)
                                   ; backend's web page
 :url "http://umax1220p.sourceforge.net/"
diff --git a/doc/descriptions/unsupported.desc b/doc/descriptions/unsupported.desc
index d7e4128..2217594 100644
--- a/doc/descriptions/unsupported.desc
+++ b/doc/descriptions/unsupported.desc
@@ -668,6 +668,28 @@
 :comment "Probably unsupported. "
 
 ;********************************************************************************************
+:mfg "Fujitsu"
+:url "http://www.fujitsu.com/"
+
+:model "SP1120"
+:interface "USB"
+:usbid "0x04c5" "0x1473"
+:status :unsupported
+:comment "Genesys GL310 chipset, not supported by sane-genesys backend."
+
+:model "SP1125"
+:interface "USB"
+:usbid "0x04c5" "0x1475"
+:status :unsupported
+:comment "Genesys GL310 chipset, not supported by sane-genesys backend."
+
+:model "SP1130"
+:interface "USB"
+:usbid "0x04c5" "0x1476"
+:status :unsupported
+:comment "Genesys GL310 chipset, not supported by sane-genesys backend."
+
+;********************************************************************************************
 
 :mfg "Genius"
 :url "http://www.geniusnet.com.tw/"
@@ -1939,6 +1961,7 @@
 
 :model "DocuPen RC800"
 :interface "USB"
+:usbid "0x18dd" "0x1000"
 :status :unsupported
 :comment "Probably not supported. No details known."
 
@@ -2411,6 +2434,7 @@
 
 :model "Astra 6700"
 :interface "USB"
+:usbid "0x0638" "0x0a30"
 :status :unsupported
 :comment "Not supported. No chipset information available. Same as Avision iVina FB2400."
 
diff --git a/doc/descriptions/v4l.desc b/doc/descriptions/v4l.desc
index d585a94..711f453 100644
--- a/doc/descriptions/v4l.desc
+++ b/doc/descriptions/v4l.desc
@@ -10,7 +10,7 @@
 ;
 
 :backend "v4l"                    ; name of backend
-:version "1.0-3"                  ; version of backend
+:version "1.0-3 (unmaintained)"   ; version of backend
 :manpage "sane-v4l"               ; name of manpage (if it exists)
 :url "mailto:henning@meier-geinitz.de" ; backend's web page
 
diff --git a/doc/descriptions/xerox_mfp.desc b/doc/descriptions/xerox_mfp.desc
index 59b56dd..dd9d283 100644
--- a/doc/descriptions/xerox_mfp.desc
+++ b/doc/descriptions/xerox_mfp.desc
@@ -53,6 +53,36 @@
 :mfg "Samsung"
 :url "http://www.samsung.com"
 
+:model "X4300 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3324"
+:status :untested
+
+:model "K4350 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3325"
+:status :untested
+
+:model "X7600 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3326"
+:status :untested
+
+:model "K7600 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3327"
+:status :untested
+
+:model "K703 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3331"
+:status :untested
+
+:model "X703 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3332"
+:status :untested
+
 :model "SCX-4x16"
 :interface "USB"
 :usbid "0x04e8" "0x3409"
@@ -290,7 +320,7 @@
 
 :model "SCX-3405W"
 :interface "Ethernet"
-:status :basic
+:status :good
 
 :model "SCX-3400"
 :interface "USB"
@@ -305,17 +335,17 @@
 :model "SCX-4729FD"
 :interface "USB"
 :usbid "0x04e8" "0x3453"
-:status :basic
+:status :good
 
 :model "CLX-6260"
 :interface "USB"
 :usbid "0x04e8" "0x3455"
-:status :minimal
+:status :good
 
 :model "CLX-3300 Series"
 :interface "USB"
 :usbid "0x04e8" "0x3456"
-:status :basic
+:status :good
 
 :model "SCX-470x"
 :interface "USB"
@@ -325,7 +355,7 @@
 :model "CLX-4190"
 :interface "USB"
 :usbid "0x04e8" "0x345a"
-:status :minimal
+:status :good
 
 :model "SCX-4650 4x21S Series"
 :interface "USB"
@@ -352,3 +382,33 @@
 :usbid "0x04e8" "0x3468"
 :status :untested
 
+:model "M458x Series"
+:interface "USB"
+:usbid "0x04e8" "0x346f"
+:status :untested
+
+:model "M4370 5370 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3471"
+:status :untested
+
+:model "X401 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3477"
+:status :untested
+
+:model "K401 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3478"
+:status :untested
+
+:model "K3250 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3481"
+:status :untested
+
+:model "X3220 Series"
+:interface "USB"
+:usbid "0x04e8" "0x3482"
+:status :untested
+