summaryrefslogtreecommitdiff
path: root/doc/gt68xx/gt68xx.CHANGES
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2020-03-30 21:30:45 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2020-03-30 21:30:45 +0200
commitee770c2346eb37e0dcb8b6cf3eaacf3d8efd6bbc (patch)
tree58f05092be1a17a939e861f8cadcda1b6ca2ecef /doc/gt68xx/gt68xx.CHANGES
parent0da9e21872802cfc6e975b1ebaf9efb9e5934d84 (diff)
parentfef76e17ed4c607ea73b81279f9ef1d7121be900 (diff)
Merge branch 'release/experimental/1.0.29-1_experimental1'experimental/1.0.29-1_experimental1
Diffstat (limited to 'doc/gt68xx/gt68xx.CHANGES')
-rw-r--r--doc/gt68xx/gt68xx.CHANGES16
1 files changed, 8 insertions, 8 deletions
diff --git a/doc/gt68xx/gt68xx.CHANGES b/doc/gt68xx/gt68xx.CHANGES
index 43f2e85..aa87504 100644
--- a/doc/gt68xx/gt68xx.CHANGES
+++ b/doc/gt68xx/gt68xx.CHANGES
@@ -17,7 +17,7 @@ V 1.0.82 (2006-10-03)
V 1.0.81 (2006-05-21)
* Added support for Plustek OpticPro S24 (some models). Added .conf entry for
- Plustek OpticPro S12.
+ Plustek OpticPro S12.
V 1.0.80 (2006-01-02)
@@ -34,7 +34,7 @@ V 1.0.79 (2005-12-09) sane-backends 1.0.17
scanners are not detected anymore after closing the device.
* Fixed wait_lamp_stable. Wait for a maximum time of 60 seconds. Print
warming up message after 5 seconds. Print how long warming up took.
-* For Mustek ScanExpress A3 USB, use more intelligent warm-up mechanism. The
+* For Mustek ScanExpress A3 USB, use more intelligent warm-up mechanism. The
brightness for this scanner first decreases and then increases again. With the
previous logic the scanner always warmed up for at least 10 seconds even if it
wasn't necessary.
@@ -50,7 +50,7 @@ V 1.0.78 (2005-10-16)
V 1.0.77 (2005-09-29)
* Added support for Plustek OpticSlim M12 (untested). Based on patch from
- Gerhard Jaeger <gerhard@gjaeger.de>.
+ Gerhard Jaeger <gerhard@gjaeger.de>.
* Fixed gt68xx homepage links in man page. Changed minimum version of libusb
to 0.1.8.
@@ -290,7 +290,7 @@ V 1.0-55 (2004-03-06)
* Added detection for Genius Vivid 1200 EX.
* Fixed product id of Mustek BearPaw 2448 TA Plus.
* Other minor updates.
-
+
V 1.0-54 (2004-02-10)
* Added basic support for Plustek OpticSlim 2400. Thanks to Radoslaw Grzanka and
@@ -335,7 +335,7 @@ V 1.0-49 (2003-09-30)
* Added ScanMagic 1200 UB Plus to man page and .desc.
* Added Settings for Plustek OpticSlim 1200
* Added detection of Genius Vivid 4x. It won't work out-of-the-box, however.
-* CCD coarse calib shouldn't run into an endless loop anymore. Plustek 1248U
+* CCD coarse calib shouldn't run into an endless loop anymore. Plustek 1248U
is much faster now.
V 1.0-48 (2003-07-25)
@@ -376,7 +376,7 @@ V 1.0-43 (2003-03-06)
- Small requests are done with a response buffer of 8 bytes (instead of 64)
now. Looks like GT-6816 based scanners return 8 bytes if the firmware is
loaded and 64 bytes if it's not loaded.
-- Changed GT-6816 firmware check to ignore errors from above change.
+- Changed GT-6816 firmware check to ignore errors from above change.
GT-6816 scanners work with the BSDs now (at least once).
- Updated manpage concerning the BSDs.
@@ -527,8 +527,8 @@ V 1.0-27 (2002-10-25)
- Removed override for Trust Copmact Scan and Medion/Tevion/Lifetec LT 9452
(Mustek ScanExpress 1200 UB Plus clones).
- Removed override for Tevion MD 9458 (seems to be an Artec Ultima 2000 (e +?)
- clone).
-
+ clone).
+
V 1.0-26 (2002-10-22)
- Several fixes for Medion MD-9385 and Artec Ultima 2000 based scanners. The