summaryrefslogtreecommitdiff
path: root/doc/niash
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
commit6e9c41a892ed0e0da326e0278b3221ce3f5713b8 (patch)
tree2e301d871bbeeb44aa57ff9cc070fcf3be484487 /doc/niash
Initial import of sane-backends version 1.0.24-1.2
Diffstat (limited to 'doc/niash')
-rw-r--r--doc/niash/niash.TODO64
1 files changed, 64 insertions, 0 deletions
diff --git a/doc/niash/niash.TODO b/doc/niash/niash.TODO
new file mode 100644
index 0000000..ded62ca
--- /dev/null
+++ b/doc/niash/niash.TODO
@@ -0,0 +1,64 @@
+To do:
+======
+- implement coarse calibration to determine settings for analog-front-end
+ All CCDs encountered so far seem to need about the same settings however.
+
+- Store analog calibration data somewhere.
+ Use currently used values as default.
+
+- Suggestions by Marcin Cieslak:
+ - clean up structures
+ - clean up namespace
+ - clean up source formatting ('indent --gnu' ?)
+
+
+- implement real calibration, using 12 bit data at 600 dpi
+ instead of 8 bit data.at 150 dpi.
+ -> is now at 600 dpi, not yet at 12 bit
+
+- design a mechanism to set the scan and calibration areas
+ a) part of HWProps structure, or
+ b) set by user at first scan
+
+- further investigate scanner registers
+ a) study backtracking register more
+ b) identify bits in bit-oriented registers.
+
+- add more error checking ('sanity checking') on parameters
+
+- figure out what the USB interrupts mean that sometimes occur.
+
+
+
+Done
+====
+
+- Get rid of mytypes.h / fix types
+ Now an int is implicitly assumed to be 32 bit.
+
+- make backend comply with tstbackend
+-> all externs and publics removed when compiling towards sane
+
+- implement sane_cancel properly
+-> done by ullsig
+
+- implement timing mechanism for scanner lamp
+ so scanning can only start if the lamp was already on for 30 seconds
+Possible implementation:
+On startup: if lamp is off, turn it on and start timer
+On scan: if lamp is off, turn it on and start timer. Wait for timer expiry.
+On exit: if scanner chip is niash00012 then turn off lamp,
+ otherwise let the scanner turn it off automatically
+-> Implemented by Ullrich Sigwanz
+
+- try out parallel port scanning on HP3400/4300
+-> parallel port support will be dropped, no people to test/develop it
+
+- investigate vertical resolution setting of hp3400/4300.
+-> experiment with the motor table, formula is already known to generate it
+-> 600 dpi is possible by doubling most values in the table
+-> 150 dpi can be done by using register 0x06 to skip every other line
+
+- Add separate gamma tables for R, G, B. This should be easy (look at how
+ other backends do it) but is not really required yet.
+-> not required