summaryrefslogtreecommitdiff
path: root/doc/plustek/Plustek-PARPORT.txt
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
commit6e9c41a892ed0e0da326e0278b3221ce3f5713b8 (patch)
tree2e301d871bbeeb44aa57ff9cc070fcf3be484487 /doc/plustek/Plustek-PARPORT.txt
Initial import of sane-backends version 1.0.24-1.2
Diffstat (limited to 'doc/plustek/Plustek-PARPORT.txt')
-rw-r--r--doc/plustek/Plustek-PARPORT.txt49
1 files changed, 49 insertions, 0 deletions
diff --git a/doc/plustek/Plustek-PARPORT.txt b/doc/plustek/Plustek-PARPORT.txt
new file mode 100644
index 0000000..e5b6097
--- /dev/null
+++ b/doc/plustek/Plustek-PARPORT.txt
@@ -0,0 +1,49 @@
+Plustek-PARPRORT.txt (2004-03-28) Gerhard Jäger <gerhard@gjaeger.de>
+====================================================================
+
+
+Beginning with SANE-1.0.13, there's a backend called plustek_pp.
+This is for controlling Plustek parallel-port scanner and compatible
+devices. For a full listing, see plustek_pp.desc.
+
+This code formerly was available for creating the Linux kernelmodule
+pt_drv. This should no longer be necessary. You should be able to use
+the backend out of the box.
+
+
+The kernel module
+-----------------
+
+As it might be helpful to create and use the kernel-module, this way still
+exists. It's possible to create this module out of the backend sources
+in sane-backends/backend. Simply do (as root user)
+
+./MakeModule.sh
+
+Then the module should be compiled, installed and loaded.
+
+Add the following three lines to file /etc/modules.conf
+
+alias char-major-40 pt_drv
+pre-install pt_drv modprobe -k parport
+options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0 slowIO=1
+
+See man page for sane-plustek_pp ("man sane-plustek_pp") for explanation of
+these options.
+
+Now "scanimage -L" should show something like this:
+device `plustek:/dev/pt_drv' is a Plustek 9630P flatbed scanner
+
+
+Known Problems:
+---------------
+
+Sometimes it is necessary to change the ioctl-interface between the
+driver and the backend, in this case the version number of the communication
+protocol will be changed and newer drivers won't work with older backends
+and vice versa.
+In this case (error -9019 in the SANE debug output!!) you have to recompile SANE
+AND the driver (have a look at the installation procedure above).
+
+
+