Update upstream source from tag 'upstream/1.0.32'

Update to upstream version '1.0.32'
with Debian dir 2c1111c59d9d68bcbf479a4a4de7697fe2de127f

1 files changed, 27 insertions, 15 deletions

diff --git a/doc/sane-avision.man b/doc/sane-avision.man
index f0a5091..517ac1b 100644
--- a/doc/sane-avision.man
+++ b/doc/sane-avision.man
@@ -5,10 +5,6 @@
 sane\-avision \- SANE backend for original Avision and Avision OEM scanners
 (HP, Minolta, Mitsubishi, UMAX and possibly more) flatbed and film scanners.
 
-.SH ABOUT THIS FILE
-
-This file is a short description for the avision-backend shipped with SANE.
-
 .SH DESCRIPTION
 The
 .B sane\-avision
@@ -16,7 +12,7 @@ library implements a SANE (Scanner Access Now Easy) backend that
 provides access to various Avision scanners and the Avision OEM
 scanners labelled by HP, Minolta, Mitsubishi or Fujitsu.
 
-It is fully big-endian aware and in every-day use on PowerPC and SPARC
+It is fully big-endian aware and in everyday use on PowerPC and SPARC
 systems.
 
 .B I suggest you hold one hand on the power-button of the scanner while
@@ -102,9 +98,14 @@ Where
 .I scsi-spec
 is the path-name to a special device or a device ID for the device that
 corresponds to a SCSI scanner. The special device name must be a generic
-SCSI device or a symlink to such a device, for example on Linux "/dev/sga"
-or "/dev/sg0". The device ID is the ID returned by the scanner, for example
-"HP" or "AVISION". See sane\-scsi(5) for details.
+SCSI device or a symlink to such a device, for example on Linux
+.I /dev/sga
+or
+.IR /dev/sg0 .
+The device ID is the ID returned by the scanner, for example
+"HP" or "AVISION". See
+.BR sane\-scsi (5)
+for details.
 .TP
 Note:
 Since the backend now includes native USB access,
@@ -116,10 +117,12 @@ the HP 53xx, HP 74xx or Minolta film-scanners.
 .I usb-spec
 is the USB device name, the vendor/product ID pair or the name used by
 libusb corresponding to the USB scanner. For example "0x03f0 0x0701" or
-"libusb:002:003". See sane\-usb(5) for details.
+"libusb:002:003". See
+.BR sane\-usb (5)
+for details.
 
 The program
-.IR sane\-find\-scanner
+.BR sane\-find\-scanner (1)
 helps to find out the correct scsi or usb device name.
 
 A list with supported devices is built into the avision backend so
@@ -147,13 +150,19 @@ contain the configuration file.  Under UNIX, the directories are
 separated by a colon (`:'), under OS/2, they are separated by a
 semi-colon (`;').  If this variable is not set, the configuration file
 is searched in two default directories: first, the current working
-directory (".") and then in @CONFIGDIR@.  If the value of the
+directory (".") and then in
+.IR @CONFIGDIR@ .
+If the value of the
 environment variable ends with the directory separator character, then
 the default directories are searched after the explicitly specified
 directories.  For example, setting
 .B SANE_CONFIG_DIR
-to "/tmp/config:" would result in directories "tmp/config", ".", and
-"@CONFIGDIR@" being searched (in this order).
+to "/tmp/config:" would result in directories
+.IR tmp/config ,
+.IR . ,
+and
+.I @CONFIGDIR@
+being searched (in this order).
 .TP
 .B SANE_DEBUG_AVISION
 If the library was compiled with debug support enabled, this
@@ -165,11 +174,14 @@ Example:
 export SANE_DEBUG_AVISION=7
 
 .SH "SEE ALSO"
-sane(7), sane\-scsi(5), sane\-usb(5)
+.BR sane (7),
+.BR sane\-scsi (5),
+.BR sane\-usb (5)
 .br
-http://exactcode.com/site/open_source/saneavision/
+.I http://exactcode.com/site/open_source/saneavision
 
 .SH MAINTAINER
 Ren\['e] Rebe
+
 .SH AUTHOR
 Ren\['e] Rebe and Meino Christian Cramer