summaryrefslogtreecommitdiff
path: root/doc/sane-coolscan3.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:46 +0100
committerJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:46 +0100
commitecaaf250cb33ff61f37a7b441f2337584a655350 (patch)
tree4303648095deff998ae20c2393b56db527742ac9 /doc/sane-coolscan3.man
parent5793a221e112fa49073de0137d6bfa750a61b0a1 (diff)
parent351b7328520c16730ceb46e5acae16038c42185e (diff)
Update upstream source from tag 'upstream/1.0.32'
Update to upstream version '1.0.32' with Debian dir 2c1111c59d9d68bcbf479a4a4de7697fe2de127f
Diffstat (limited to 'doc/sane-coolscan3.man')
-rw-r--r--doc/sane-coolscan3.man85
1 files changed, 53 insertions, 32 deletions
diff --git a/doc/sane-coolscan3.man b/doc/sane-coolscan3.man
index 238f127..57c0652 100644
--- a/doc/sane-coolscan3.man
+++ b/doc/sane-coolscan3.man
@@ -31,49 +31,62 @@ LS-8000 ED IEEE 1394
.ft R
.RE
-Please send mail to sane-devel@alioth-lists.debian.net to report successes
-or failures.
+Please send mail to
+.I sane-devel@alioth-lists.debian.net
+to report successes or failures.
.SH OPTIONS
The options the backend supports can either be selected through command line
-options to programs like scanimage or through GUI elements in xscanimage or xsane.
+options to programs like
+.BR scanimage (1)
+or through GUI elements in
+.BR xscanimage (1)
+or
+.BR xsane (1).
-Valid command line options and their syntax can be listed by using
+Valid command line options and their syntax can be listed by using:
+.PP
.RS
scanimage \-\-help \-d coolscan3:<interface>:<device>
.RE
+.PP
where <interface> and <device> specify the device in question, as in the
-configuration file (see next section). The \-d parameter and its argument
-can be omitted to obtain information on the first scanner identified. Use
-the command
+configuration file (see next section). The
+.B \-d
+parameter and its argument can be omitted to obtain information on the
+first scanner identified. Use the command:
+.PP
.RS
scanimage \-L
.RE
+.PP
to list all devices recognized by your SANE installation.
The options should be fully described by the description or tooltips given by
frontend. Here is a description of some of the most important options, in the
-syntax with which they must be supplied to scanimage:
+syntax with which they must be supplied to
+.BR scanimage (1):
.TP
-.I \-\-frame <n>
+.B \-\-frame <n>
This option specifies which frame to operate on, if a motorized film strip
feeder or APS adapter are used. The frame number
.I <n>
ranges from 1 to the number of frames available, which is sensed each time
the backend is initialized (usually each time you start the frontend).
.TP
-.I \-\-subframe <x>
+.B \-\-subframe <x>
This option shifts the scan window by the specified amount (default
unit is mm).
.TP
-.I \-\-infrared=yes/no
+.B \-\-infrared=yes/no
If set to "yes", the scanner will read the infrared channel, thus allowing
defect removal in software. The infrared image is read during a second scan,
with no options altered. The backend must not be restarted between the scans.
-If you use scanimage, perform a batch scan with batch\-count=2 to obtain the
-IR information.
+If you use scanimage, perform a batch scan with
+.B batch\-count=2
+to obtain the IR information.
.TP
-.I \-\-depth <n>
+.B \-\-depth <n>
Here <n> can either be 8 or the maximum number of bits supported by the
scanner (10, 12, or 14). It specifies whether or not the scanner reduces
the scanned data to 8 bits before sending it to the backend. If 8 bits are
@@ -81,43 +94,45 @@ used, some information and thus image quality is lost, but the amount of data
is smaller compared to higher depths. Also, many imaging programs and image
formats cannot handle depths greater than 8 bits.
.TP
-.I \-\-autofocus
+.B \-\-autofocus
Perform autofocus operation. Unless otherwise specified by the other options (
-.I \-\-focus\-on\-centre
+.B \-\-focus\-on\-centre
and friends), focusing is performed on the centre of the selected scan area.
.TP
-.I \-\-ae\-wb
+.B \-\-ae\-wb
.TP
-.I \-\-ae
+.B \-\-ae
Perform a pre-scan to calculate exposure values automatically.
-.I \-\-ae\-wb
+.B \-\-ae\-wb
will maintain the white balance, while
-.I \-\-ae
+.B \-\-ae
will adjust each channel separately.
.TP
-.I \-\-exposure
+.B \-\-exposure
Multiply all exposure times with this value. This allows exposure
correction without modifying white balance.
.TP
-.I \-\-load
+.B \-\-load
Load the next slide when using the slide loader.
.TP
-.I \-\-eject
+.B \-\-eject
Eject the film strip or mounted slide when using the slide loader.
.TP
-.I \-\-reset
+.B \-\-reset
Reset scanner. The scanner will perform the same action as when power is
turned on: it will eject the film strip and calibrate itself. Use this
whenever the scanner refuses to load a film strip properly, as a result of
which
-.I \-\-eject
+.B \-\-eject
does not work.
.SH CONFIGURATION FILE
-The configuration file @CONFIGDIR@/coolscan3.conf specifies the device(s)
-that the backend will use. Owing to the nature of the supported connection
-types SCSI, USB, and IEEE 1394, the default configuration file supplied with
-the SANE distribution should work without being edited.
+The configuration file
+.I @CONFIGDIR@/coolscan3.conf
+specifies the device(s) that the backend will use. Owing to the nature of
+the supported connection types SCSI, USB, and IEEE 1394, the default
+configuration file supplied with the SANE distribution should work without
+being edited.
Each line in the configuration file is either of the following, where all
entries are case-sensitive:
@@ -157,7 +172,11 @@ a value of 128 requests all debug output to be printed. Smaller
levels reduce verbosity.
.SH "SEE ALSO"
-sane\-scsi(5), sane\-usb(5), scanimage(1), xscanimage(1), xsane(1)
+.BR sane\-scsi (5),
+.BR sane\-usb (5),
+.BR scanimage (1),
+.BR xscanimage(1),
+.BR xsane(1)
.SH BUGS
Currently, the SANE protocol does not allow automatically updating options
@@ -177,5 +196,7 @@ about the scanner. The IEEE 1394 models therefore only work with
No real bugs currently known, please report any to the SANE developers' list.
.SH AUTHORS
-coolscan3 written by A. Zummo (a.zummo@towertech.it), based heavily on
-coolscan2 written by Andr\['a]s Major (andras@users.sourceforge.net).
+coolscan3 written by A. Zummo
+.RI < a.zummo@towertech.it >,
+based heavily on coolscan2 written by Andr\['a]s Major
+.RI < andras@users.sourceforge.net >.