summaryrefslogtreecommitdiff
path: root/doc/sane-epsonds.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2019-07-31 16:59:49 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2019-07-31 16:59:49 +0200
commit1687222e1b9e74c89cafbb5910e72d8ec7bfd40f (patch)
treed78102ce30207c63e7608eeba743efd680c888dc /doc/sane-epsonds.man
parent58912f68c2489bcee787599837447e0d64dfd61a (diff)
New upstream version 1.0.28upstream/1.0.28
Diffstat (limited to 'doc/sane-epsonds.man')
-rw-r--r--doc/sane-epsonds.man18
1 files changed, 9 insertions, 9 deletions
diff --git a/doc/sane-epsonds.man b/doc/sane-epsonds.man
index 3324804..03bbbd2 100644
--- a/doc/sane-epsonds.man
+++ b/doc/sane-epsonds.man
@@ -8,15 +8,15 @@ The
library implements a SANE (Scanner Access Now Easy) backend that
provides access to Epson ESC/I-2 scanners.
.PP
-Valid command line options and their syntax can be listed by using
+Valid command line options and their syntax can be listed by using
.RS
scanimage \-\-help \-d epsonds
.RE
Not all devices support all options.
.TP
.I Scan Mode
-The
-.I \-\-mode
+The
+.I \-\-mode
switch selects the basic mode of operation of the scanner. Valid choices
are Lineart, Gray and Color. The Lineart mode is black and white only,
Gray will produce 256 levels of gray or more depending on the scanner
@@ -33,7 +33,7 @@ allow one to select either 8 bits, 12 or 14 bits per color channel. For a
color scan this means an effective color depth of 36 or 42 bits over
all three channels. The valid choices depend on the scanner model.
-The
+The
.I \-\-resolution
switch selects the resolution for a scan. Some EPSON scanners will scan in
any resolution between the lowest and highest possible value. The list
@@ -41,7 +41,7 @@ reported by the scanner can be displayed using the "\-\-help \-d epson"
parameters to scanimage.
The geometry options
-.I \-l \-t \-x \-y
+.I \-l \-t \-x \-y
control the scan area: \-l sets the top left x coordinate, \-t the top
left y coordinate, \-x selects the width and \-y the height of the scan
area. All parameters are specified in millimeters.
@@ -60,20 +60,20 @@ The
option select the ADF mode (simplex/duplex).
.SH CONFIGURATION FILE
-The configuration file @CONFIGDIR@/epsonds.conf specifies the device(s) that the
+The configuration file @CONFIGDIR@/epsonds.conf specifies the device(s) that the
backend will use. Possible connection types are:
.TP
.I USB
For not automatically detected USB scanners, their VENDOR and PRODUCT ID can
-be specified manually in the config file.
+be specified manually in the config file.
More information about valid syntax for USB devices can be found in sane\-usb(5).
.TP
.I Network (not yet supported)
Network scanners can be auto-discovered if
.I autodiscovery
-is specified after
+is specified after
.I
-net
+net
keyword. An IP address to connect to can also be used.
.SH FILES
.TP