summaryrefslogtreecommitdiff
path: root/doc/sane-epsonds.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2015-10-08 12:32:49 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2015-10-08 12:32:49 +0200
commitcfd27ef2ad8b005fd47ab41ef29b71d9e3d48201 (patch)
tree56cb8849a5df91b19b72fd4f48c79c343cd9bc5e /doc/sane-epsonds.man
parentba8d09abe681600aad991f4a75e904615b7ed29f (diff)
Imported Upstream version 1.0.25upstream/1.0.25
Diffstat (limited to 'doc/sane-epsonds.man')
-rw-r--r--doc/sane-epsonds.man101
1 files changed, 101 insertions, 0 deletions
diff --git a/doc/sane-epsonds.man b/doc/sane-epsonds.man
new file mode 100644
index 0000000..ea9bcbb
--- /dev/null
+++ b/doc/sane-epsonds.man
@@ -0,0 +1,101 @@
+.TH sane\-epsonds 5 "29 Mar 2015" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.IX sane\-epsonds
+.SH NAME
+sane\-epsonds \- SANE backend for EPSON ESC/I-2 scanners
+.SH DESCRIPTION
+The
+.B sane\-epsonds
+library implements a SANE (Scanner Access Now Easy) backend that
+provides access to Epson ESC/I-2 scanners.
+.PP
+Valid command line options and their syntax can be listed by using
+.RS
+scanimage \-\-help \-d epsonds
+.RE
+Not all devices support all options.
+.TP
+.I Scan Mode
+The
+.I \-\-mode
+switch selects the basic mode of operation of the scanner. Valid choices
+are Lineart, Gray and Color. The Lineart mode is black and white only,
+Gray will produce 256 levels of gray or more depending on the scanner
+and Color means 24 bit color mode or more depending on the scanner.
+Some scanners will internally use 36 bit color, their external interface
+however may only support 24 bits.
+
+The
+.I \-\-depth
+option selects the bit depth the scanner is using. This option is only
+available for scanners that support more than one bit depth. Older
+scanners will always transfer the image in 8bit mode. Newer scanners
+allow to select either 8 bits, 12 or 14 bits per color channel. For a
+color scan this means an effective color depth of 36 or 42 bits over
+all three channels. The valid choices depend on the scanner model.
+
+The
+.I \-\-resolution
+switch selects the resolution for a scan. Some EPSON scanners will scan in
+any resolution between the lowest and highest possible value. The list
+reported by the scanner can be displayed using the "\-\-help \-d epson"
+parameters to scanimage.
+
+The geometry options
+.I \-l \-t \-x \-y
+control the scan area: \-l sets the top left x coordinate, \-t the top
+left y coordinate, \-x selects the width and \-y the height of the scan
+area. All parameters are specified in millimeters.
+
+The
+.I \-\-source
+option selects the scan source. Valid options depend on the installed
+options. The default is "Flatbed".
+
+The
+.I \-\-eject
+option ejects the sheet in the ADF.
+
+The
+.I \-\-adf-mode
+option select the ADF mode (simplex/duplex).
+
+.SH CONFIGURATION FILE
+The configuration file @CONFIGDIR@/epsonds.conf specifies the device(s) that the
+backend will use. Possible connection types are:
+.TP
+.I USB
+For not automatically detected USB scanners, their VENDOR and PRODUCT ID can
+be specified manually in the config file.
+More information about valid syntax for USB devices can be found in sane\-usb(5).
+.TP
+.I Network (not yet supported)
+Network scanners can be auto-discovered if
+.I autodiscovery
+is specified after
+.I
+net
+keyword. An IP address to connect to can also be used.
+.SH FILES
+.TP
+.I @LIBDIR@/libsane\-epsonds.a
+The static library implementing this backend.
+.TP
+.I @LIBDIR@/libsane\-epsonds.so
+The shared library implementing this backend (present on systems that
+support dynamic loading).
+.SH ENVIRONMENT
+.TP
+.B SANE_DEBUG_EPSONDS
+If the library was compiled with debug support enabled, this
+environment variable controls the debug level for this backend. E.g.,
+a value of 128 requests all debug output to be printed. Smaller
+levels reduce verbosity. Values around 11-16 will usuallybe enough for
+a bug report.
+
+.SH "SEE ALSO"
+
+sane\-usb(5), scanimage(1), xscanimage(1), xsane(1)
+
+.SH AUTHOR
+
+The package is written by Alessandro Zummo