Merge branch 'release/experimental/1.0.29-1_experimental1'experimental/1.0.29-1_experimental1

1 files changed, 22 insertions, 23 deletions

diff --git a/doc/sane-fujitsu.man b/doc/sane-fujitsu.man
index 6bd5f73..ccc3d89 100644
--- a/doc/sane-fujitsu.man
+++ b/doc/sane-fujitsu.man
@@ -5,18 +5,18 @@
 sane\-fujitsu \- SANE backend for Fujitsu flatbed and ADF scanners
 
 .SH DESCRIPTION
-The 
+The
 .B sane\-fujitsu
 library implements a SANE (Scanner Access Now Easy) backend which
 provides access to most Fujitsu flatbed and ADF scanners.
 
-This document describes backend version 133, which shipped with SANE 1.0.26.
+This document describes backend version 134, which shipped with SANE 1.0.28.
 
 .SH SUPPORTED HARDWARE
-This version supports every known model which speaks the Fujitsu SCSI and 
-SCSI\-over\-USB protocols. Specifically, the SCSI M309x and M409x series, the 
+This version supports every known model which speaks the Fujitsu SCSI and
+SCSI\-over\-USB protocols. Specifically, the SCSI M309x and M409x series, the
 SCSI fi\-series, most of the USB fi\-series, the USB ScanSnap S5xx/S15xx, and
-the USB iX1xx/5xx series scanners are supported. Please see the list at 
+the USB iX1xx/5xx series scanners are supported. Please see the list at
 http://www.sane\-project.org/sane\-supported\-devices.html for details.
 
 This backend may support other Fujitsu scanners. The best
@@ -40,7 +40,7 @@ ScanStation  M3093E/DE/EX fi\-4110EOX/2
 ScanPartner  M3096EX      fi\-4010CU
 SP\-Jr        M3097E+/DE   S300/S300M
 SP\-10/10C    M3099A/EH/EX S1300/S1100
-SP\-15C/300C               fi\-60F
+SP\-15C/300C               fi\-60F/65F
 SP\-600C/620C              fi\-5015C
                           SP\-2x/3x
 .fi
@@ -51,13 +51,13 @@ SP\-600C/620C              fi\-5015C
 .SH OPTIONS
 Effort has been made to expose all hardware options, including:
 .PP
-source s 
+source s
 .RS
 Selects the source for the scan. Options
 may include "Flatbed", "ADF Front", "ADF Back", "ADF Duplex".
 .RE
 .PP
-mode m 
+mode m
 .RS
 Selects the mode for the scan. Options
 may include "Lineart", "Halftone", "Gray", and "Color".
@@ -65,13 +65,13 @@ may include "Lineart", "Halftone", "Gray", and "Color".
 .PP
 resolution, y\-resolution
 .RS
-Controls scan resolution. Setting \-\-resolution also sets \-\-y\-resolution, 
+Controls scan resolution. Setting \-\-resolution also sets \-\-y\-resolution,
 though this behavior is overridden by some frontends.
 .RE
 .PP
 tl\-x, tl\-y, br\-x, br\-y
 .RS
-Sets scan area upper left and lower right coordinates. These are renamed 
+Sets scan area upper left and lower right coordinates. These are renamed
 t, l, x, y by some frontends.
 .RE
 .PP
@@ -89,19 +89,19 @@ group of endorser options.
 Additionally, several 'software' options are exposed by the backend. These
 are reimplementations of features provided natively by larger scanners, but
 running on the host computer. This enables smaller machines to have similar
-capabilities. Please note that these features are somewhat simplistic, and 
-may not perform as well as the native implementations. Note also that these 
-features all require that the driver cache the entire image in memory. This 
+capabilities. Please note that these features are somewhat simplistic, and
+may not perform as well as the native implementations. Note also that these
+features all require that the driver cache the entire image in memory. This
 will almost certainly result in a reduction of scanning speed.
 
-Use 'scanimage \-\-help' to get a list, but be aware that some options may 
-be settable only when another option has been set, and that advanced options 
+Use 'scanimage \-\-help' to get a list, but be aware that some options may
+be settable only when another option has been set, and that advanced options
 may be hidden by some frontend programs.
 .PP
 .SH CONFIGURATION FILE
 The configuration file "fujitsu.conf" is used to tell the backend how to look
 for scanners, and provide options controlling the operation of the backend.
-This file is read each time the frontend asks the backend for a list 
+This file is read each time the frontend asks the backend for a list
 of scanners, generally only when the frontend starts. If the configuration
 file is missing, the backend will be unable to locate any scanners.
 .PP
@@ -109,8 +109,8 @@ Scanners can be specified in the configuration file in 4 ways:
 .PP
 "scsi FUJITSU"
 .RS
-Requests backend to search all scsi busses in the system for a device 
-which reports itself to be a scanner made by 'FUJITSU'. 
+Requests backend to search all scsi busses in the system for a device
+which reports itself to be a scanner made by 'FUJITSU'.
 .RE
 .PP
 "scsi /dev/sg0" (or other scsi device file)
@@ -122,7 +122,7 @@ specify one. Probably should not be used with the other "scsi" line above.
 .PP
 "usb 0x04c5 0x1042" (or other vendor/product ids)
 .RS
-Requests backend to search all usb busses in the system for a device 
+Requests backend to search all usb busses in the system for a device
 which uses that vendor and product id. The device will then be queried
 to determine if it is a Fujitsu scanner.
 .RE
@@ -134,7 +134,7 @@ untested.
 .RE
 .PP
 The only configuration option supported is "buffer\-size=xxx", allowing you
-to set the number of bytes in the data buffer to something other than the 
+to set the number of bytes in the data buffer to something other than the
 compiled\-in default, 65536 (64K). Some users report that their scanner will
 "hang" mid\-page, or fail to transmit the image if the buffer is not large
 enough.
@@ -174,13 +174,13 @@ enables debugging output to stderr. Valid values are:
 Flatbed units may fail to scan at maximum area, particularly at
 high resolution.
 .PP
-Any model that does not support VPD during inquiry will not function until 
+Any model that does not support VPD during inquiry will not function until
 an override is added to the backend.
 .PP
 CCITT Fax compression used by older scanners is not supported.
 .PP
 JPEG output is supported by the backend, but not by the SANE protocol, so is
-disabled in this release. It can be enabled if you rebuild from source. 
+disabled in this release. It can be enabled if you rebuild from source.
 
 .SH CREDITS
 m3091 backend: Frederik Ramm <frederik a t remote d o t org>
@@ -234,4 +234,3 @@ sane\-epjitsu(5)
 
 .SH AUTHOR
 m. allan noah: <kitno455 a t gmail d o t com>
-