New upstream version 1.0.28upstream/1.0.28

1 files changed, 300 insertions, 49 deletions

diff --git a/doc/sane-hp5590.man b/doc/sane-hp5590.man
index 2ccfcc5..5330800 100644
--- a/doc/sane-hp5590.man
+++ b/doc/sane-hp5590.man
@@ -1,69 +1,320 @@
-.TH sane\-hp5590 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
-.IX sane\-hp5590
+.\" Automatically generated by Pandoc 2.7.2
+.\"
+.TH "sane-hp5590" "5" "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.hy
 .SH NAME
-sane\-hp5590 \- SANE backend for
-Hewlett-Packard 4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners
+.PP
+sane-hp5590 - SANE backend for Hewlett-Packard
+4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners
 .SH DESCRIPTION
-The
-.B sane\-hp5590
-library implements a SANE (Scanner Access Now Easy) backend that provides
-access to the following Hewlett-Packard Workgroup/Document scanners:
 .PP
-.RS
+The \f[B]sane-hp5590\f[R] library implements a SANE (Scanner Access Now
+Easy) backend that provides access to the following Hewlett-Packard
+Workgroup/Document scanners:
+.IP \[bu] 2
 ScanJet 4500C
-.br
+.IP \[bu] 2
 ScanJet 4570C
-.br
+.IP \[bu] 2
 ScanJet 5500C
-.br
+.IP \[bu] 2
 ScanJet 5550C
-.br
+.IP \[bu] 2
 ScanJet 5590
-.br
+.IP \[bu] 2
 ScanJet 7650
+.PP
+If you own a scanner other than the ones listed above that works with
+this backend, please let us know this by sending the scanner\[cq]s exact
+model name and the USB vendor and device ids (e.g.\ from
+\f[I]/sys/bus/usb/devices\f[R], \f[I]sane-find-scanner\f[R] or syslog)
+to us.
+Even if the scanner\[cq]s name is only slightly different from the
+models mentioned above, please let us know.
+.SH OPTIONS
+.PP
+The options the backend supports can either be selected through command
+line options to programs like scanimage or through GUI elements in
+\f[I]xscanimage\f[R] or \f[I]xsane\f[R].
+Valid command line options and their syntax can be listed by using:
+.IP
+.nf
+\f[C]
+scanimage --help -d hp5590:interface:device
+\f[R]
+.fi
+.PP
+where \f[I]interface\f[R] and \f[I]device\f[R] specify the device in
+question, as in the configuration file.
+Add \f[I]--all-options\f[R] to also list the hardware read-out options.
+The -d parameter and its argument can be omitted to obtain information
+on the first scanner identified.
+.PP
+Use the command:
+.IP
+.nf
+\f[C]
+scanimage -L
+\f[R]
+.fi
+.PP
+to list all devices recognized by your SANE installation.
+.SH DEVICE SPECIFIC OPTIONS
+.TP
+.B -l \f[I]n\f[R]
+Top-left X position of scan area in \f[B]mm\f[R].
+Allowed range: 0 ..
+215.889.
+.TP
+.B -t \f[I]n\f[R]
+Top-left Y position of scan area in \f[B]mm\f[R].
+Allowed range: 0 ..
+297.699.
+.TP
+.B -x \f[I]n\f[R]
+X width of scan-area in \f[B]mm\f[R].
+Allowed range: 0 ..
+215.889.
+.TP
+.B -y \f[I]n\f[R]
+Y height of scan-area in \f[B]mm\f[R].
+Allowed range: 0 ..
+297.699.
+.PP
+By default, the maximum size will be scanned.
+.TP
+.B --mode \f[I]mode\f[R]
+Select color mode.
+\f[I]mode\f[R] must be one of: \[lq]Color\[rq], \[lq]Color (48
+bits)\[rq], \[lq]Gray\[rq], \[lq]Lineart\[rq].
+.RS
+.IP \[bu] 2
+\[lq]Color\[rq] - Scanning is done with 3 * 8 bit RGB color values per
+pixel.
+.IP \[bu] 2
+\[lq]Color (48 bits)\[rq] - Scanning is done with 3 * 16 bit RGB color
+values per pixel.
+.IP \[bu] 2
+\[lq]Gray\[rq] - Scanning is done with 1 * 8 bit gray value per pixel.
+.IP \[bu] 2
+\[lq]Lineart\[rq] - Scanning is done with 1 bit black and white value
+per pixel.
+.RE
+.TP
+.B --source \f[I]source\f[R]
+Select the source for scanning.
+\f[I]source\f[R] must be one of: \[lq]Flatbed\[rq], \[lq]ADF\[rq],
+\[lq]ADF Duplex\[rq], \[lq]TMA Slides\[rq], \[lq]TMA Negatives\[rq].
+.RS
+.IP \[bu] 2
+\[lq]Flatbed\[rq] - Scan document on the flat document glass.
+.IP \[bu] 2
+\[lq]ADF\[rq] - Scan frontsides of documents with automatic document
+feeder.
+.IP \[bu] 2
+\[lq]ADF Duplex\[rq] - Scan front- and backsides of documents with
+automatic document feeder.
+Note, the backside images must be rotated in a separate post process
+step.
+.IP \[bu] 2
+\[lq]TMA Slides\[rq] - Slide scanning with transparent media adapter.
+(Not fully supported by hp5590 backend).
+.IP \[bu] 2
+\[lq]TMA Negatives\[rq] - Negative film scanning with transparent media
+adapter.
+(Not fully supported by hp5590 backend).
+.RE
+.TP
+.B --resolution \f[I]res\f[R]
+Set the resolution of the scanned image in \f[B]dpi\f[R].
+\f[I]res\f[R] must be one of: 100, 200, 300, 600, 1200, 2400.
+.PP
+Default settings: Lineart, Flatbed, 100dpi.
+.TP
+.B --extend-lamp-timeout[=yes|no]
+Extend lamp timeout period.
+no = 15 minutes, yes = 1 hour.
+(Default: no)
+.TP
+.B --wait-for-button[=yes|no]
+Wait for button press before scanning starts.
+(Default: no)
+.TP
+.B --preview[=yes|no]
+Request a preview-quality scan.
+(Default: no)
+.TP
+.B --hide-eop-pixel[=yes|no]
+Hide end-of-page indicator pixels and overwrite with color of next
+neighbor pixels.
+(Default: yes)
+.PD 0
+.P
+.PD
+The scanner uses the last pixel in every scan line for storing the
+end-of-page status.
+This is needed to detect the end of the document sheet when the
+automatic document feeder (ADF) is used.
+Unfortunately the end-of-page pixels are also generated in flatbed
+scans.
+It is recommended to hide these pixels.
+.TP
+.B --trailing-lines-mode \f[I]mode\f[R]
+Filling mode of trailing lines after end of page when automatic document
+feeder (ADF) is used.
+\f[I]mode\f[R] must be one of: \[lq]last\[rq], \[lq]raw\[rq],
+\[lq]raster\[rq], \[lq]white\[rq], \[lq]black\[rq], \[lq]color\[rq].
+(Default: \[lq]last\[rq])
+.RS
+.IP \[bu] 2
+\[lq]last\[rq] = repeat the last scan line (recommended),
+.IP \[bu] 2
+\[lq]raw\[rq] = read raw scan data (not recommended),
+.IP \[bu] 2
+\[lq]raster\[rq] = generate black and white pixel pattern,
+.IP \[bu] 2
+\[lq]white\[rq] = white pixels,
+.IP \[bu] 2
+\[lq]black\[rq] = black pixels,
+.IP \[bu] 2
+\[lq]color\[rq] = RGB or gray colored pixels (see next option).
 .RE
+.TP
+.B --trailing-lines-color \f[I]n\f[R]
+Set color value for filling trailing scan lines in trailing lines mode
+\[lq]color\[rq] (see previous option).
+(Default color: violet)
+.PD 0
+.P
+.PD
+The RGB color value must be specified and calculated as 65536 * r + 256
+* g + b, with r, g, b being values in the range of 0 ..
+255.
+.SH READ OUT OPTIONS
 .PP
-If you own a scanner other than the ones listed above that works with this
-backend, please let us know this by sending the scanner's exact model name and
-the USB vendor and device ids (e.g. from
-.IR /proc/bus/usb/devices ,
-.I sane\-find\-scanner
-or syslog) to us. Even if the scanner's name is only slightly different from
-the models mentioned above, please let us know.
-.SH CONFIGURATION
-None required.
+The following options allow reading out the button state, counter value,
+color setting, and the state of document in ADF.
+This can be used to programmatically control corresponding scanner
+options like switching between \f[I]flatbed\f[R] and \f[I]ADF\f[R] mode,
+or triggering prost processing tasks after scanning.
+.TP
+.B --button-pressed
+Get the id of the last button pressed.
+Id is one of \[lq]none\[rq], \[lq]power\[rq], \[lq]scan\[rq],
+\[lq]collect\[rq], \[lq]file\[rq], \[lq]email\[rq], \[lq]copy\[rq],
+\[lq]up\[rq], \[lq]down\[rq], \[lq]mode\[rq], \[lq]cancel\[rq].
+.PD 0
+.P
+.PD
+The scanner stores the id of the last button pressed until it is read.
+After read out, the state is reset and subsequent readings will return
+\[lq]none\[rq].
+.TP
+.B --color-led
+Get the state of the color LED indicators.
+The state is either \[lq]color\[rq] or \[lq]black_white\[rq].
+.TP
+.B --counter-value
+Get the counter value as shown on LCD.
+The value is in the range of 1 ..
+99.
+.TP
+.B --doc-in-adf
+Get the state of the document-available indicator of the automatic
+document feeder (ADF).
+The state is either \[lq]yes\[rq] or \[lq]no\[rq].
+.SH HINTS FOR USERS OF SCANBD
+.PP
+\f[I]Scanbd\f[R] is a scanner button daemon, which can read scanner
+buttons and trigger scan actions.
+.PP
+Do not use the old \f[I]scanbuttond\f[R] interface with hp5590.
+It is outdated and shall not be used any more.
+Scanbd\[cq]s regular interface is fully supported by the current version
+of the \f[I]hp5590\f[R] backend.
+.PP
+This example shows a minimum configuration file and the corresponding
+script file for scanbd to be included in \f[I]scanbd.conf\f[R].
+.IP \[bu] 2
+\f[B]hp5590.conf\f[R]
+.IP
+.nf
+\f[C]
+device hp5590 {
+    # Device matching
+    filter = \[dq]\[ha]hp5590.*\[dq]
+    desc = \[dq]HP5590 Scanner Family\[dq]
+
+    # Read out counter value and store in environment variable.
+    function function_lcd_counter {
+        filter = \[dq]\[ha]counter-value.*\[dq]
+        desc   = \[dq]hp5590: LCD counter\[dq]
+        env    = \[dq]SCANBD_FUNCTION_LCD_COUNTER\[dq]
+    }
+
+    # Run scan script when button is pressed.
+    action do-scan {
+        filter = \[dq]\[ha]button-pressed.*\[dq]
+        desc   = \[dq]hp5590: Scan button pressed\[dq]
+        script = \[dq]scan_action.script\[dq]
+        string-trigger {
+            from-value  = \[dq]none\[dq]
+            to-value    = \[dq]scan\[dq]
+        }
+    }
+}
+\f[R]
+.fi
+.IP \[bu] 2
+\f[B]scan_action.script\f[R]
+.IP
+.nf
+\f[C]
+#!/bin/bash
+echo device = $SCANBD_DEVICE
+echo action = $SCANBD_ACTION
+echo counter = $SCANBD_FUNCTION_LCD_COUNTER
+scanfile=\[dq]$HOME/tmp/scans/scan-$(date +%s).pnm\[dq]
+case $SCANBD_ACTION in
+do-scan)
+    scanimage -d \[dq]$SCANBD_DEVICE\[dq] > \[dq]$scanfile\[dq]
+    ;;
+*)
+    echo Warning: Unknown scanbd action: \[dq]$SCANBD_ACTION\[dq]
+    ;;
+esac
+\f[R]
+.fi
 .SH FILES
 .TP
-.I @LIBDIR@/libsane\-hp5590.a
+.B \f[I]\[at]LIBDIR\[at]/libsane-hp5590.a\f[R]
 The static library implementing this backend.
 .TP
-.I @LIBDIR@/libsane\-hp5590.so
+.B \f[I]\[at]LIBDIR\[at]/libsane-hp5590.so\f[R]
 The shared library implementing this backend (present on systems that
 support dynamic loading).
 .SH ENVIRONMENT
+.PP
+If the library was compiled with debug support enabled, this environment
+variable controls the debug level for this backend.
+.PP
+\f[B]SANE_DEBUG_HP5590\f[R]
+.PP
+Higher debug levels increase the verbosity of the output:
+.IP
+.nf
+\f[C]
+10 - generic processing
+20 - verbose backend messages
+40 - HP5590 high-level commands
+50 - HP5590 low-level (USB-in-USB) commands
+\f[R]
+.fi
 .TP
-.B SANE_DEBUG_HP5590
-If the library was compiled with debug support enabled, this
-environment variable controls the debug level for this backend.  Higher
-debug levels increase the verbosity of the output. See used levels below.
-.P
-.RS
-Level 10 - generic processing
-.br
-Level 20 - verbose backend messages
-.br
-Level 40 - HP5590 high-level commands
-.br
-Level 50 - HP5590 low-level (USB-in-USB) commands
-
-.P
-Example: 
-
+.B Example:
 export SANE_DEBUG_HP5590=50
-
-.SH "SEE ALSO"
-.BR sane (7),
-.BR sane\-usb (5),
-
-.SH AUTHOR
-Ilia Sotnikov <hostcc@gmail.com>
+.SH SEE ALSO
+.PP
+\f[B]sane\f[R](7), \f[B]sane-usb\f[R](5)
+.SH AUTHORS
+Ilia Sotnikov <hostcc@gmail.com>.