Initial import of sane-backends version 1.0.24-1.2

1 files changed, 88 insertions, 0 deletions

diff --git a/doc/sane-ibm.man b/doc/sane-ibm.man
new file mode 100644
index 0000000..50138d7
--- /dev/null
+++ b/doc/sane-ibm.man
@@ -0,0 +1,88 @@
+.TH sane\-ibm 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.IX sane\-ibm
+.SH NAME
+sane\-ibm \- SANE backend for IBM and Ricoh SCSI flatbed scanners
+.SH DESCRIPTION
+The
+.B sane\-ibm
+library implements a SANE (Scanner Access Now Easy) backend that provides
+access to the IBM 2456 and the Ricoh IS-410, IS-420, and IS-430 flatbed
+scanners. Support for the IS-410 and IS-430 is untested. Please contact the
+maintainer or the sane\-devel mailing list if you own such a scanner.
+.PP
+This backend is alpha-quality. It may have bugs and some scanners haven't been
+tested at all. Be careful and pull the plug if the scanner causes unusual
+noise.
+
+.SH "DEVICE NAMES"
+This backend expects device names of the form:
+.PP
+.RS
+.I special
+.RE
+.PP
+Where
+.I special
+is either the path-name for the special device that corresponds to a SCSI
+scanner. The program
+.I sane\-find\-scanner 
+helps to find out the correct device. Under Linux, such a device name could be
+.I /dev/sg0
+or
+.IR /dev/sga ,
+for example.  See 
+.BR sane\-scsi (5)
+for details.
+
+.SH CONFIGURATION
+The contents of the
+.I ibm.conf
+file is a list of device names that correspond to SCSI
+scanners.  Empty lines and lines starting with a hash mark (#) are
+ignored.  See 
+.BR sane\-scsi (5)
+on details of what constitutes a valid device name.
+
+.SH FILES
+.TP
+.I @CONFIGDIR@/ibm.conf
+The backend configuration file (see also description of
+.B SANE_CONFIG_DIR
+below).
+.TP
+.I @LIBDIR@/libsane\-ibm.a
+The static library implementing this backend.
+.TP
+.I @LIBDIR@/libsane\-ibm.so
+The shared library implementing this backend (present on systems that
+support dynamic loading).
+.SH ENVIRONMENT
+.TP
+.B SANE_CONFIG_DIR
+This environment variable specifies the list of directories that may
+contain the configuration file.  Under UNIX, the directories are
+separated by a colon (`:'), under OS/2, they are separated by a
+semi-colon (`;').  If this variable is not set, the configuration file
+is searched in two default directories: first, the current working
+directory (".") and then in @CONFIGDIR@.  If the value of the
+environment variable ends with the directory separator character, then
+the default directories are searched after the explicitly specified
+directories.  For example, setting
+.B SANE_CONFIG_DIR
+to "/tmp/config:" would result in directories "tmp/config", ".", and
+"@CONFIGDIR@" being searched (in this order).
+.TP
+.B SANE_DEBUG_IBM
+If the library was compiled with debug support enabled, this
+environment variable controls the debug level for this backend.  Higher
+debug levels increase the verbosity of the output. 
+
+.SH "SEE ALSO"
+.BR sane (7),
+.BR sane\-find\-scanner (1),
+.BR sane\-scsi (5),
+
+.SH AUTHOR
+mf <massifr@tiscalinet.it>
+.br
+Maintained by Henning Meier-Geinitz <henning@meier\-geinitz.de>