summaryrefslogtreecommitdiff
path: root/doc/sane-microtek2.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:46 +0100
committerJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:46 +0100
commitecaaf250cb33ff61f37a7b441f2337584a655350 (patch)
tree4303648095deff998ae20c2393b56db527742ac9 /doc/sane-microtek2.man
parent5793a221e112fa49073de0137d6bfa750a61b0a1 (diff)
parent351b7328520c16730ceb46e5acae16038c42185e (diff)
Update upstream source from tag 'upstream/1.0.32'
Update to upstream version '1.0.32' with Debian dir 2c1111c59d9d68bcbf479a4a4de7697fe2de127f
Diffstat (limited to 'doc/sane-microtek2.man')
-rw-r--r--doc/sane-microtek2.man26
1 files changed, 17 insertions, 9 deletions
diff --git a/doc/sane-microtek2.man b/doc/sane-microtek2.man
index cc4f6f4..45756ed 100644
--- a/doc/sane-microtek2.man
+++ b/doc/sane-microtek2.man
@@ -9,15 +9,17 @@ provides access to Microtek scanners with a SCSI-2 command set.
This backend can be considered alpha to beta. Some scanner models are reported
to work well, others not. New development versions of this backend can be
obtained from
-.B http://karstenfestag.gmxhome.de
+.IR http://karstenfestag.gmxhome.de .
.PP
There exists a different backend for Microtek scanners with SCSI-1 command
set.
-Refer to sane\-microtek(5) for details.
+Refer to
+.BR sane\-microtek (5)
+for details.
.PP
And there is work in progress for the ScanMaker 3600.
See
-.B http://sourceforge.net/projects/sm3600
+.IR http://sourceforge.net/projects/sm3600 .
.PP
At present, the following scanners are known positively to work with this
backend:
@@ -53,7 +55,7 @@ Scanpaq SQ2030 Parport
.ft R
.PP
Additional information can be found at
-.BR http://www.sane\-project.org/ .
+.IR http://www.sane\-project.org/ .
.PP
If you own a Microtek scanner other than the ones listed above,
it may or may not work with SANE! Because equal scanners are sold under
@@ -109,7 +111,9 @@ supported by the scanner in dependence of the scanning-mode and other
options.
Not supported options are disabled.
.PP
-The following options are supported by the Microtek2-driver:
+The following options are supported by the
+.B sane\-microtek2
+driver:
.PP
Color, grayscale, halftone and lineart scans.
.PP
@@ -299,15 +303,19 @@ If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 255 requests all debug output to be printed. Smaller
levels reduce verbosity. To see error messages on stderr set
-SANE_DEBUG_MICROTEK2 to 1 (Remark: The whole debugging levels should
-be better revised).
+.B SANE_DEBUG_MICROTEK2
+to 1 (Remark: The whole debugging levels should be better revised).
.br
E.g. just say:
.br
export SANE_DEBUG_MICROTEK2=128
+
.SH "SEE ALSO"
-sane\-scsi(5), sane(7)
+.BR sane\-scsi(5) ,
+.BR sane (7)
+
.SH "AUTHORS"
Bernd Schroeder (not active anymore)
.br
-Karsten Festag karsten.festag@gmx.de
+Karsten Festag
+.RI < karsten.festag@gmx.de >.