Update upstream source from tag 'upstream/1.0.28'

Update to upstream version '1.0.28'
with Debian dir ec5bb298266630fc3801ff6dc0c258f6df7ba979

1 files changed, 17 insertions, 17 deletions

diff --git a/doc/sane-mustek.man b/doc/sane-mustek.man
index 536466f..f06d9c1 100644
--- a/doc/sane-mustek.man
+++ b/doc/sane-mustek.man
@@ -15,7 +15,7 @@ Paragon MFS-6000CX
 .br
 Paragon MFS-12000CX
 .br
-Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP 
+Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP
 .br
 Paragon MFC-800S, 800 II SP
 .br
@@ -37,7 +37,7 @@ Paragon 1200 SP Pro
 .br
 Paragon 1200 A3 Pro
 .br
-Paragon 600 II EP 
+Paragon 600 II EP
 .br
 Paragon 600 II N
 .br
@@ -53,7 +53,7 @@ Primax Compact 4800 SCSI
 .br
 .RE
 .PP
-More details can be found on the Mustek SCSI backend homepage 
+More details can be found on the Mustek SCSI backend homepage
 .IR http://www.meier\-geinitz.de/sane/mustek\-backend/ .
 .PP
 Don't mix up MFS (Paragon), Pro and ScanExpress models! They're
@@ -92,7 +92,7 @@ If you own a Mustek (or Trust) scanner other than the ones listed
 above that works with this backend, please let us know by sending the
 scanner's exact model name (look at the front and back of the scanner)
 and a debug output to
-.IR sane\-devel@lists.alioth.debian.org .
+.IR sane\-devel@alioth-lists.debian.net .
 You can get the debug output by setting the environment variable
 .B SANE_DEBUG_MUSTEK
 to 5 and showing the list of available scanners with scanimage \-L. Please
@@ -112,17 +112,17 @@ Where
 .I special
 is either the path-name for the special device that corresponds to a
 SCSI scanner or the port number at which the parallel port scanners can
-be found (see section 
+be found (see section
 .B "PARALLEL PORT SCANNERS"
 below).  For SCSI scanners, the special device name must be a generic SCSI
 device or a symlink to such a device.  The program
-.I sane\-find\-scanner 
+.I sane\-find\-scanner
 helps to find out the correct device. Under Linux, such a device name
 could be
 .I /dev/sg0
 or
 .IR /dev/sg3 ,
-for example.  See 
+for example.  See
 .BR sane\-scsi (5)
 for details.
 .SH CONFIGURATION
@@ -130,7 +130,7 @@ The contents of the
 .I mustek.conf
 file is a list of options and device names that correspond to Mustek
 scanners.  Empty lines and lines starting with a hash mark (#) are
-ignored.  See 
+ignored.  See
 .BR sane\-scsi (5)
 on details of what constitutes a valid device name.
 .PP
@@ -279,7 +279,7 @@ for driver- and platform-specific information.
 The ScanExpress models have sometimes trouble with high resolution
 color mode. If you encounter sporadic corrupted images (parts duplicated
 or shifted horizontally) kill all other applications before scanning
-and (if sufficient memory is available) disable swapping. 
+and (if sufficient memory is available) disable swapping.
 .PP
 Details on how to get the Mustek SCSI adapters and other cards running can be
 found at
@@ -306,12 +306,12 @@ only one number on a single line. Example:
 .RE
 .PP
 Note that for these scanners usually root privileges are required to access the
-I/O ports.  Thus, either make frontends such as 
+I/O ports.  Thus, either make frontends such as
 .BR scanimage (1)
-and 
+and
 .BR xscanimage (1)
 setuid root (generally not recommended for safety reasons) or, alternatively,
-access this backend through the network daemon 
+access this backend through the network daemon
 .BR saned (8).
 .PP
 If the Mustek backend blocks while sending the inquiry command to the scanner,
@@ -360,7 +360,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and
 .B SANE_DEBUG_MUSTEK
 If the library was compiled with debug support enabled, this
 environment variable controls the debug level for this backend.  Higher
-debug levels increase the verbosity of the output. 
+debug levels increase the verbosity of the output.
 
 .ft CR
 .nf
@@ -374,15 +374,15 @@ Value  Description
 .fi
 .ft R
 
-Example: 
+Example:
 export SANE_DEBUG_MUSTEK=4
 
 .SH "SEE ALSO"
 .BR sane (7),
 .BR sane\-find\-scanner (1),
 .BR sane\-scsi (5),
-.BR sane\-mustek_usb (5), 
-.BR sane\-gt68xx (5), 
+.BR sane\-mustek_usb (5),
+.BR sane\-gt68xx (5),
 .BR sane\-plustek (5),
 .BR sane\-mustek_pp (5)
 .br
@@ -396,7 +396,7 @@ Henning Meier-Geinitz, James Perry (600 II EP).
 
 .SH BUGS
 Scanning with the SCSI adapters supplied by Mustek is very slow at
-high resolutions and wide scan areas. 
+high resolutions and wide scan areas.
 .PP
 Some scanners (e.g. Paragon 1200 A3 + Pro, SE A3) need more testing.
 .PP